Un-special-case the sub-speed property, and apply subtitle speed updates
in more cases. In particular, this respects runtime changes of the
sub-fps option.
(A minor consequence of this is that the subtitle speed is recomputed
more often even in cases when it's not necessary. Also, the subtitle
update is slightly "delayed" rather than strictly instant. Both of
these likely are absolutely not observable by the user, although the
subtitle speed verbose log message will be printed more often if the
subtitle format is MicroDVD.)
The plan is to nuke the custom filter chain completely. It's not clear
what will happen to the still needed builtin filters (mostly hardware
deinterlacing and vf_vapoursynth). Most likely we'll replace them with
different filter chain concept (whose main purpose will be providing
builtin things and bridging to libavfilter).
The undocumented "warn" options are there to disable deprecation
warnings when the player inserts filter automatically.
The same will be done to audio filters, at a later point.
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes#4250.
This wasn't enabled if no stream cache was used. It can work with only
the demuxer cache.
In theory this could be always enabled (even for local files), but still
try to avoid this, and enable it only if the source is marked as
potentially being a "network" stream. The intention is mostly to enable
it for the youtube-dl pseudo-DASH support.
The 'sub' and 'audio' configuration subdirectories are supposed to
be fallbacks for sub-paths and audio-file-paths respectively, but
they weren't being scanned even if they existed.
This is a bit approximate, because we rely on the pixel format changing
if the hardware decoding changes. This is not always true, as the pixel
format for software decoded video and hardware decoded video copied back
to CPU RAM could be the same. (Not sure if that is actually the case for
any supported cases.)
But for now this should fix most of #4289.
Basically, see the example in input.rst.
This is better than the "old" vf-toggle method, because it doesn't
require the user to duplicate the filter string in mpv.conf and
input.conf.
Some aspects of this changes are untested, so enjoy your alpha testing.
Will still hide playlist items with long enough filenames and osd-font-size
but not as soon.
osc messages should now preserve their scaling with fullscreen toggling and
cycling through audio-only files and files with video.
Closes#4081, #4083, #4102
Requested. The property semantics are a bit muddy due to lack of effort.
Anticipated use is different display of cache status, so it should not
matter anyway.
This is just a pointless refactor with the only goal of making
image_writer_opts.format a number.
The pointless part of it is that instead of using some sort of arbitrary
ID (in place of a file extension string), we use a AV_CODEC_ID_. There
was also some idea of falling back to the libavcodec MJPEG encoder if
mpv was not linked against libjpeg, but this fails. libavcodec insist on
having AV_PIX_FMT_YUVJ420P, which we pretend does not exist, and which
we always map to AV_PIX_FMT_YUV420P (without the J indicating full
range), so encoder init fails. This is pretty dumb, but whatever. The
not-caring factor is raised by the fact that we don't know that we
should convert to full range, because encoders have no proper way to
signal this. (Be reminded that AV_PIX_FMT_YUVJ420P is deprecated.)
This also will set image=NULL, if the video frame is marked as hwaccel,
and could not be copied to normal RAM. This will probably change the
error message (due to screenshot_get() returning NULL, instead of making
image conversion fail at a later point), but the behavior is the same
anyway.
Fixes theoretical lock-order issues found by Coverity. Calling these
inside the log is unnecessary anyway, because they have their own
locking, and because mpv_detach_destroy() needs to be called by someone
who has exclusive access to the mpv_handle (it's basically a destructor
function). The lock order issues comes from the fact that they call back
into the client API implementation to broadcast events and such.
This was added for A-B loops, but it looks like commit a1dec6f5 made
this code unnecessary. Remove it, because it has the annoying
side-effect of blocking playback stop when seeking past the end.
When pausing, we sent BOCTRL_PAUSE and VOCTRL_RESTORE_SCREENSAVER. These
essentially wait until the video frame has been rendered. This is a
problem with the opengl-cb, if GL rendering is done in the same thread
as libmpv uses. Unfortunately, it's allowed to use opengl-cb this way.
Logically speaking, it's a deadlock situation, which is resolved with a
timeout. This can lead to quite ugly effects, like the on-pause frame
not being rendered until the timeout has passed. It has been interpreted
as video continuing to play.
Resolve this by simply not blocking on pause. Make the screensaver
controls async, and handle sending VOCTRL_PAUSE in the VO thread.
(All this could be avoided by redoing the internal VO API.)
Also see #4152.
Currently, tracks have always associated streams, so there can't be a
NULL dereference on the next line. But all the code is written with the
possibility in mind that we might want tracks without streams, so make
it consistent.
Found by coverity.
Not so important by itself, but important for when we replace the vf
libavfilter wrapper with the common implementation. (Which will
hopefully happen, but not too soon.)
Preparation for enabling hw filters. mp_image_params can't have an
AVHWFramesContext reference (because it can't hold any allocations, and
isn't meant to hold "active" data in the first place.
So just use a mp_image. It has all real data removed, because that would
essentially leak 1 frame once the decoder or renderer don't need it
anymore.
The AVFrame in the tmp_frame field was never actually deallocated.
Since this AVFrame holds data temporarily only, and is unreferenced
immediately after use, there is actually no need to make it per-pad, so
simplify it a bit.
(There's also no real value in caching this tmp_frame at all, but I
guess it makes the control flow slightly simpler.)
Using these was a temporary solution while some compilers implemented
the underlying atomic mechanisms, but not the C11 language parts (or
that's what I guess). Not really useful for us anymore. Also, there is
the slight risk of having subtly incorrect semantics by using
potentially changing compiler internals and such.
Seen with a VOD of a recently ended livestream on Youtube.
They seem to use segmented DASH but unlike normal Youtube
segmented DASH, the segments don't seem to need the initialization
segment.
The video actually fails to start to play if the init segment is
prepended with a lot of 'Found duplicated MOOV Atom. Skipped it' errors
popping up.
If we have a disconnected output, read data only passively (and don't
cause input to be written). Otherwise, we're in danger of making
libavfilter queue too many frames on other outputs which are connected
to the same input, but don't read as quickly.
Also don't set pad->output_needed in this specific case, because it
would nonsensically make lavfi_process() return true, even if nothing is
going on.
This commit breaks if there is a simple filter chain with a connected
input, but a disconnected output, like
--lavfi-complex='[aid1] copy [ao]'
and the audio output didn't initialize correctly. This will eventually
starve video as the audio packet queue get full (it will print a
warning, and then assume video EOF and exit).
But whatever.
Probably fixes#4118.
We use the metadata provided by youtube-dl to sort-of implement
fragmented DASH streaming.
This is all a bit hacky, but hopefully a makeshift solution until
libavformat has proper mechanisms. (Although in danger of being one
of those temporary hacks that become permanent.)
If used with fuzzy matching, the player tends to pick up random text
files, sometimes with interesting results.
The most interesting interaction is when the user uses
--log-file=something.txt, and mpv tries to open its own log file. It
essentially "freezes" during probing, because every time it reads from
it, it will write some more data, which in turn will cause more data to
be read - until the 2MB max. probing size is slowly reached. This is not
even an obscure corner case, but happened to multiple users.
The .txt extension has been considered a subtitle extension ever since
the code was added to MPlayer's subreader.c, but I'm not seeing many
actual subtitle files with this extension, so just get rid of it.
Instead of enabling it only when a stream-cache is enabled, also try to
enable it independently from that if the demuxer is marked as
is_network.
Also add some code to the EDL code, so EDLs containing network streams
are automatically cached this way.
Extend the OSD info line so that it shows the demuxer cache in this case
(more or less).
I didn't find where or whether options.rst describes how the demuxer
cache is enabled, so no changes there.
several unicode characters can be encoded in two different ways, either
in a precomposed (NFC) or decomposed (NFD) representation. everywhere
besides on macOS, specifically HFS+, precomposed strings are being used.
furthermore on macOS we can get either precomposed or decomposed
strings, for example when not HFS+ formatted volumes are used. that can
be the case for network mounted devices (SMB, NFS) or optical/removable
devices (UDF). this can lead to an inequality of actual equal strings,
which can happen when comparing strings from different sources, like the
command line or filesystem. this makes it mainly a problem on macOS
systems.
one case that can potential break is the sub-auto option. to prevent
that we convert the search string as well as the string we search in to
the same normalised representation, specifically we use the decomposed
form which is used anywhere else.
this could potentially be a problem on other platforms too, though the
potential of occurring is very minor. for those platforms we don't
convert anything and just fallback to the input.
Fixes#4016
Requested. Supposedly "scenarist closed captions".
(The list of getting quite full. But it's probably still better than
trying to probe the files by contents, because the external subtitle
loader code will initially look at _all_ files in the same directory as
the main file.)
Useful for distinguishing bit depth when hardware decoding. (To the
degree it's useful to show it at all. This just brings the hardware
decoding case on the same level of showing information as the software
decode call.)
A hacky, convoluted, half-working mess that attempts to cut off overlong
playlists.
It does so by relying on the ASS formatting rule that the font size is
specified in the virtual PlayResY resolution. This means we can
(normally) easily tell how many lines fit on the screen. On the other
hand, this does not work if the text is wrapped.
This as a kludge until a Better™ solution is available.
I'm still getting some crashes after issue #3210 was fixed in commit
5beb230690. It's hard to reproduce those
crashes, they happen maybe once a month, so I guess it could be a race
condition. But in any case, I don't see anything wrong in applying some
defensive programming here.
For reference, here is what was happening on 0.23.0-1 from Debian
testing:
Playing: ytdl://usL5CeP_row
(+) Video --vid=1 (*) (h264)
(+) Audio --aid=1 --alang=und (*) (aac)
[osc]
[osc] stack traceback:
[osc] @osc.lua:2074: in function 'process_event'
[osc] @osc.lua:2246: in function 'cb'
[osc] mp.defaults:107: in function 'fn'
[osc] mp.defaults:60: in function 'handler'
[osc] mp.defaults:339: in function 'handler'
[osc] mp.defaults:448: in function 'call_event_handlers'
[osc] mp.defaults:485: in function 'dispatch_events'
[osc] mp.defaults:441: in function <mp.defaults:440>
[osc] [C]: in ?
[osc] [C]: in ?
[osc] Lua error: @osc.lua:2074: attempt to index field 'eventresponder' (a nil value)
Note that the location is different from where issue #3210 happens.
Signed-off-by: Roland Hieber <rohieb@rohieb.name>
"show-text test; script-binding display_stats" can potentially crash. It
sends a message event. None of the string arguments can be NULL, which
fails if cmd->key_name is NULL. This in turn can be due to commands
combined with ";" (basically the key association doesn't consider nested
commands).
Seems like quite on oversight.
For most of the better pthread implementations, pthread_mutex_init() on
an already 0-initialized memory block is probably a no-op, but of course
we should do things correctly. Also could setup analysis tools.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
"drop-frame-count" -> "decoder-frame-drop-count"
"vo-drop-frame-count" -> "frame-drop-count"
This gets rid of the backwards "drop-frame" part in the name.
Maybe calling the new property "frame-drops" would be better, but there
are already a bunch of similar properties that end in "-count".
Disabling cache readahead by default until at least 1 track is selected
is mainly for external files and such, where you don't want them to use
up resources until they're actually used.
It doesn't make sense to disable the cache for the demuxer opened for
prefetch. Also, it's fine to let it do that for the main file too (doing
or not doing it is of little consequence). That saves us from having to
distinguish them.
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
As preparation for file prefetching, we basically have to get rid of
using mpctx->playback_abort for the main demuxer (i.e. the thing that
can be prefetched). It can't be changed on a running demuxer, and always
using the same cancel handle would either mean aborting playback would
also abort prefetching, or that playback can't be aborted anymore.
Make this more flexible with some refactoring.
Thi is a quite shitty solution if you ask me, but YOLO.
Requires a bunch of hacks:
- we access AVFilterLink.hw_frames_ctx. This is not a public API in
FFmpeg and Libav. Newer FFmpeg provides an accessor
(av_buffersink_get_hw_frames_ctx), but it's not available in Libav or
the current FFmpeg release or Libav. We need this value after filter
graph creation, so We have no choice but to access this.
One alternative is making filter creation and format negotiation
fully lazy (i.e. delay it and do it as filters are output), but this
would be a huge change.
So for now, we knowingly violate FFmpeg's and Libav's ABI and API
constraints because they don't provide anything better.
On newer FFmpeg, we use the (quite ugly) accessor, though.
- mp_image_params doesn't (and can't) have a field for the frames
context AVBufferRef. So we pass it via vf_set_proto_frame(), and even
more hacks.
- if a filter needs a hw context, but we haven't created one yet
(because normally we create them lazily), it will fail at init.
- we allow any hw format now, although this could go horrible wrong.
Why all this effort? We could move hw deinterlacing filters etc. to
FFmpeg, which is a very worthy goal.
Can break things quite badly.
Example: reloading a plugin linked against GTK 3.x can cause a segfault
if you call dlclose() on it. According to GTK developers, unloading the
GTK library is unsupported.
Give scripting backends a proper name, instead of calling everything
"scripts".
Log client exit directly in client.c, as that is more general (doesn't
change actual output).
This basically reuses the scripting infrastructure.
Note that this needs to be explicitly enabled at compilation. For one,
enabling export for certain symbols from an executable seems to be quite
toolchain-specific. It might not work outside of Linux and cause random
problems within Linux.
If C plugins actually become commonly used and this approach is starting
to turn out as a problem, we can build mpv CLI as a wrapper for libmpv,
which would remove the requirement that plugins pick up host symbols.
I'm being lazy, so implementation/documentation are parked in existing
files, even if that stuff doesn't necessarily belong there. Sue me, or
better send patches.
We have to perform some silly acrobatics to make the playback_thread()
exit, as the mpv_command() will error out with MPV_ERROR_UNINITIALIZED.
Test case: mpv_terminate_destroy(mpv_create())
Reported by a user on IRC.
mp_image_hw_download() is a libavutil wrapper added in the previous
commit. We drop our own code completely, as everything is provided by
libavutil and our helper wrapper.
This breaks the screenshot code, so that has to be adjusted as well.
Cover art handling is a disgusting hack that causes a mess in all
components. And this will stay this way. This is the Xth time I've
changed cover art handling, and that will probably also continue.
But change the code such that cover art is injected into the demux
packet stream, instead of having an explicit special case it in the
decoder glue code. (This is somewhat more similar to the cover art hack
in libavformat.)
To avoid that the over art picture is decoded again on each seek, we
need some additional "caching" in player/video.c. Decoding it after each
seek would work as well, but since cover art pictures can be pretty
huge, it's probably ok to invest some lines of code into caching it.
One weird thing is that the cover art packet will remain queued after
seeks, but that is probably not an issue.
In exchange, we can drop the dec_video.c code, which is pretty
convenient for one of the following commits. This code duplicates a
bunch of lower-level decode calls and does icky messing with this weird
state stuff, so I'm glad it goes away.
The property calls will always succeed anyway. On the other hand, the
error handling is kind of incomplete (doesn't check setting ab-loop-a
when ab-loop-b is also set), so drop this code.
Since there's no property yet that uses this type, and the code is used
for property change detection only. this is dead code. Add it anyway for
completeness.
Obvious mistake: we entered EOF drain mode if the decoder returned
AD_WAIT, which is very wrong. AD_WAIT means we should retry after
waiting for a while (or to be precise, until the demuxer/decoder
have more data). We should just pass down this status, and not
change the audio chain state.
This was exposed by a libavfilter EOF handling bug. Feeding a filter
chain with af_dynaudnorm, and sending an EOF before a frame is returned
makes it stuck and keeps returning EAGAIN, instead of returning the
buffered audio. In combination with the bug at hand, which entered
EOG drain mode, it could happen that it got stuck due to libavfilter
discarding buffered data each time the demuxer ran out of data.
Fixes#3997.
Was intended to show a "nice" message on edition switching. In practice,
the message was never visible. The OSD code checks whether a demuxer is
loaded, and if not, discards the message - meaning if the OSD code
happened to run before the demuxer was fully loaded, no message was
shown. This is apparently a regression due to extensions to the OSD and
the situations in which it can be used.
Remove the broken code since it's too annoying to fix. Instead, a
default property message will be shown, which is a bit uglier, but
actually not too unuseful.
Helps with gif, probably does unwanted things with other formats.
This doesn't handle --end quite correctly, but this could be added
later.
Fixes#3924.
Length property is deprecated and no longer works. This fixes
a bug when the total file duration wasn't visible if the
option to display milliseconds was activated.
Having empty space before the title in layout=*bar looks worse
than the floating buttons in layout=box.
Also disable both playlist buttons selectively according to the
current position.
