We always want to use __declspec(selectany) to declare GUIDs, but
manually including <initguid.h> in every file that used GUIDs was
error-prone. Since all <initguid.h> does is define INITGUID and include
<guiddef.h>, we can remove all references to <initguid.h> and just
compile with -DINITGUID to get the same effect.
Also, this partially reverts 622bcb0 by re-adding libuuid.a to the
build, since apparently some GUIDs (such as GUID_NULL) are not declared
in the source file, even when INITGUID is set.
Normally I'd prefer a bunch of smaller functions with fewer parameters
over a single function with a lot of parameters. But future changes will
require messing with the parameters in a slightly more complex way, so a
combined function will be needed anyway. The now-unused "global"
parameter is required for later as well.
Just a minor refactor along the planned option change. This commit will
make it easier to update (i.e. copy) the VO options without copying
_all_ options. For now, behavior should be equivalent, though.
(The VO options were put into a separate struct quite early - when all
global variables were removed from the source code. It wasn't clear
whether the separate struct would have any actual purpose, but it seems
it will now. Awesome, huh.)
Instead of letting it keep decoding by trying to find a new frame,
"plug" the frame queue by not removing it. (Or actually, by putting
it back instead of discarding it.)
Matters for seamless looping (following commits), and possibly some
other corner cases.
The added function vf_unread_output_frame() is a bit of a sin, but still
reasonable, since its implementation is trivial.
This makes the difference between passing VA_FRAME_PICTURE or
VA_BOTTOM_FIELD for progressive frames (that should be force-
deinterlaced) to VAProcPipelineParameterBuffer.flags. VA-VPP doesn't
really seem to care, and we can get rid of mp_refqueue_is_interlaced()
entirely. It could be argued it's better to pass field flags instead of
the progressive flag.
"Real" frame flag vs. what we pretend it to be. It always used the real
flag, and thus never deinterlaced unflagged frames, even if the
suboption was set to "no".
I made this call up because I sort of thought this makes senssssse. I'm
now convinced that it does not, and even is actively harmful. I'm still
quite in the dark how the DirectD 11 video API is supposed to work with
synchronization, but at least for normal graphics this call would not
make much sense.
For example it should be set to IMGFMT_D3D11NV12 if it isn't already.
Otherwise, an assertion in vf.c could trigger.
This probably couldn't be provoked yet.
This involves multiple changes:
1. Brightness metadata is split into nominal peak and signal peak.
For a quick and dirty explanation: nominal peak is the brightest value
that your color space can represent (i.e. the brightness of an encoded
1.0), and signal peak is the brightest value that actually occurs in
the video (i.e. the brightest thing that's displayed).
2. vo_opengl uses a new decision logic to figure out the right nom_peak
and sig_peak for all situations. It also does a better job of picking
the right target gamut/colorspace to use for the OSD. (Which still is
and still should be treated as sRGB). This change in logic also
fixes#3293 en passant.
3. Since it was growing rapidly, the logic for auto-guessing / inferring
the right colorimetry configuration (in pass_colormanage) was split from
the logic for actually performing the adaptation (now pass_color_map).
Right now, the new logic doesn't do a whole lot since HDR metadata is
still ignored (but not for long).
This has two reasons:
1. I tend to add new fields to this metadata, and every time I've done
so I've consistently forgotten to update all of the dozens of places in
which this colorimetry metadata might end up getting used. While most
usages don't really care about most of the metadata, sometimes the
intend was simply to “copy” the colorimetry metadata from one struct to
another. With this being inside a substruct, those lines of code can now
simply read a.color = b.color without having to care about added or
removed fields.
2. It makes the type definitions nicer for upcoming refactors.
In going through all of the usages, I also expanded a few where I felt
that omitting the “young” fields was a bug.
See previous commit. (The mixing case was never supported, so this has
equivalent functionality.)
This also implicitly fixes a bug: the old code allocated image data for
the cropped surface size only, which means the
video_surface_get_bits_y_cb_cr call could write beyond the allocated
image memory.
Until now, we've always converted vdpau video surfaces to RGB, and then
mapped the resulting RGB texture. Change this so that the surface is
mapped as NV12 plane textures.
The reason this wasn't done until now is because vdpau surfaces are
mapped in an "interlaced" way as separate fields, even for progressive
video. This requires messy reinterleraving. It turns out that even
though it's an extra processing step, the result can be faster than
going through the video mixer for RGB conversion.
Other than some potential speed-gain, doing this has multiple other
advantages. We can apply our own color conversion, which is important in
more complex cases. We can correctly apply debanding and potentially
other processing that requires chroma-specific or in-YUV handling.
If deinterlacing is enabled, this switches back to the old RGB
conversion method. Until we have at least a primitive deinterlacer in
vo_opengl, this will stay this way. The d3d11 and vaapi code paths are
similar. (Of course these don't require any crazy field reinterleaving.)
Otherwise stale references will survive forever. Could leak hardware
video surfaces.
In particular, the mpv vdpau code crashed with an assertion when exiting
after toggling deinterlacing, because not all references were released.
Instead of doing HDR tone mapping on an ad-hoc basis inside
pass_colormanage, the reference peak of an image is now part of the
image params (alongside colorspace, gamma, etc.) and tone mapping is
done whenever peak_src != peak_dst.
To get sensible behavior when mixing HDR and SDR content and displays,
target-brightness is a generic filler for "the assumed brightness of SDR
content".
This gets rid of the weird display_scaled hack, sets the framework
for multiple HDR functions with difference reference peaks, and allows
us to (in a future commit) autodetect the right source peak from
the HDR metadata.
(Apart from metadata, the source peak can also be controlled via
vf_format. For HDR content this adjusts the overall image brightness,
for SDR content it's like simulating a different exposure)
Commit 0348cd08 was too naive/simple, and always inserted the d3d11vpp
filter if any d3d11 output image formats were supported, even if it
makes no sense. For example --vf=format=rgb8 already breaks it.
It needs to take the set of supported input formats into account. the
weird format negotiation makes this hard. As a simple and cheap
solution, make some assumptions about the supported formats of a filter.
I hope to simplify this one day by using another format negotiation
algorithm, but this can probably wait.
We now have a video filter that uses the d3d11 video processor, so it
makes no sense to have one in the VO interop code. The VO uses it for
formats not directly supported by ANGLE (so the video data is converted
to a RGB texture, which ANGLE can take in).
Change this so that the video filter is automatically inserted if
needed. Move the code that maps RGB surfaces to its own inteorp backend.
Add a bunch of new image formats, which are used to enforce the new
constraints, and to automatically insert the filter only when needed.
The added vf mechanism to auto-insert the d3d11vpp filter is very dumb
and primitive, and will work only for this specific purpose. The format
negotiation mechanism in the filter chain is generally not very pretty,
and mostly broken as well. (libavfilter has a different mechanism, and
these mechanisms don't match well, so vf_lavfi uses some sort of hack.
It only works because hwaccel and non-hwaccel formats are strictly
separated.)
The RGB interop is now only used with older ANGLE versions. The only
reason I'm keeping it is because it's relatively isolated (uses only
existing mechanisms and adds no new concepts), and because I want to be
able to compare the behavior of the old code with the new one for
testing. It will be removed eventually.
If ANGLE has NV12 interop, P010 is now handled by converting to NV12
with the video processor, instead of converting it to RGB and using the
old mechanism to import that as a texture.
Main use: deinterlacing.
I'm not sure how to select the deinterlacing mode at all. You can
enumate the available video processors, but at least on Intel, all of
them either signal support for all deinterlacers, or none (the latter is
apparently used for IVTC). I haven't found anything that actually tells
the processor _which_ algorithm to use.
Another strange detail is how to select top/bottom fields and field
dominance. At least I'm getting quite similar results to vavpp on Linux,
so I'm content with it for now.
Future plans include removing the D3D11 video processor use from the
ANGLE interop code.
This makes vf_vdpaupp use the deinterlacer helper code already used by
vf_vavpp. I nice side-effect is that this also removes some traces of
code originating from vo_vdpau.c, so we can switch it to LGPL.
Extend the refqueue helper with a deint setting. If not set,
mp_refqueue_should_deint() always returns false, which slightly
simplifies vf_vdpaupp. It's of no consequence to vf_vavpp (other than it
has to set it to get expected behavior).
Abstracts the annoying framerate-doubling behavior.
Same deal as with refqueue introduction: the code size blows up, but at
least it can be reused for other filters.
Calling this right at start of filter_ext() also fixes a small
regression from previous commit. The change in reference surfaces due to
the first update_pipeline() with deinterlacing enabled changed behavior
of mp_refqueue_next() and mp_refqueue_has_output(). Since
update_pipeline() was called between those, the frame output logic got
inconsistent, and the first deinterlaced frame was duplicated from the
previous non-deinterlaced frame.
Also reset the number of ref-frames when switching back to non-deint
mode.
If the deinterlacer separates fields, the framerate must be doubled.
Since we have no stable and reliably framerate anywhere, we've been
calculating it by taking the time halfway to the next frame.
vf_vavpp actually used the past frame to calculate the frame duration,
which is sort of ok, but will skip the 2nd field in a stream (since the
first frame has no past PTS). This is annoying for testing, so use the
future frame PTS instead, which means the last field of the stream will
be dropped instead.
Move the handling of the future/past frames and the associated dataflow
rules to a separate source file.
While this on its own seems rather questionable and just inflates the
code, I intend to reuse it for other filters. The logic is annoying
enough that it shouldn't be duplicated a bunch of times.
(I considered other ways of sharing this logic, such as an uber-
deinterlace filter, which would access the hardware deinterlacer via a
different API. Although that sounds like kind of the right approach,
this would have other problems, so let's not, at least for now.)
Cropping usually happens by adjusting the plane start pointers and the
image size. The former is obviously not possible for opaque hwaccel
formats, but the latter must work.
Since the code already takes care of aligning the top/left crop origin
to chroma alignment, simply set the crop origin to 0/0 in the hwaccel
case. Also add a message if such an adjustment happens.
Supporting this isn't worth much; the main usefulness is with debugging.
The main change is with video/hwdec.h. mp_hwdec_info is made opaque (and
renamed to mp_hwdec_devices). Its accessors are mainly thread-safe (or
documented where not), which makes the whole thing saner and cleaner. In
particular, thread-safety rules become less subtle and more obvious.
The new internal API makes it easier to support multiple OpenGL interop
backends. (Although this is not done yet, and it's not clear whether it
ever will.)
This also removes all the API-specific fields from mp_hwdec_ctx and
replaces them with a "ctx" field. For d3d in particular, we drop the
mp_d3d_ctx struct completely, and pass the interfaces directly.
Remove the emulation checks from vaapi.c and vdpau.c; they are
pointless, and the checks that matter are done on the VO layer.
The d3d hardware decoders might slightly change behavior: dxva2-copy
will not use the VO device anymore if the VO supports proper interop.
This pretty much assumes that any in such cases the VO will not use any
form of exclusive mode, which makes using the VO device in copy mode
unnecessary.
This is a big refactor. Some things may be untested and could be broken.
Until now, we have made the assumption that a driver will use only 1
hardware surface format. the format is dictated by the driver (you
don't create surfaces with a specific format - you just pass a
rt_format and get a surface that will be in a specific driver-chosen
format).
In particular, the renderer created a dummy surface to probe the format,
and hoped the decoder would produce the same format. Due to a driver
bug this required a workaround to actually get the same format as the
driver did.
Change this so that the format is determined in the decoder. The format
is then passed down as hw_subfmt, which allows the renderer to configure
itself with the correct format. If the hardware surface changes its
format midstream, the renderer can be reconfigured using the normal
mechanisms.
This calls va_surface_init_subformat() each time after the decoder
returns a surface. Since libavcodec/AVFrame has no concept of sub-
formats, this is unavoidable. It creates and destroys a derived
VAImage, but this shouldn't have any bad performance effects (at
least I didn't notice any measurable effects).
Note that vaDeriveImage() failures are silently ignored as some
drivers (the vdpau wrapper) support neither vaDeriveImage, nor EGL
interop. In addition, we still probe whether we can map an image
in the EGL interop code. This is important as it's the only way
to determine whether EGL interop is supported at all. With respect
to the driver bug mentioned above, it doesn't matter which format
the test surface has.
In vf_vavpp, also remove the rt_format guessing business. I think the
existing logic was a bit meaningless anyway. It's not even a given
that vavpp produces the same rt_format for output.
The complex filter support that will be added makes much more complex
use of libavfilter, and I'm not going to bother with adding hacks to
keep libavfilter optional.
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
Instead of handling this on filter chain reinit, do it directly after
the decoder. This makes the code less entangled. In particular, this
gets rid of the really weird "override params" concept in the video
filter code.
The last_format/fixed_formats have some redundance with decoder_output,
but unfortunately the latter has a slightly different use.
This is for the sake of command.c and the "deinterlace" option/property.
Instead of forcing certain "better" defaults when inserting yadif,
change the actual "yadif" defaults.
I pondered not changing vf_yadif, and instead adding a trivial "yadif-
auto" wrapper filter, which would merely have different defaults. But
thinking about it, it doesn't make any sense for "deinterlace" to have
different defaults from vf_yadif, with vf_yadif having the "worse"
defaults. If someone wants the old behavior, the old behavior can be
forced in a backward and forward compatible way by setting the
suboptions.
Fixes#2539 (kind of).
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
