Probably should have actually tested the filter changes but I didn't.
This was the wrong spot anyway since labels are unique. Something like
this should have been done further down when finding it by content. On
second thought, having multiple filters with the same content does have
a usecase (e.g. stacking multiple rotations) so removing all of them at
once probably isn't great. There's no practical usecase for having
duplicates in a string list, so we'll leave that change alone.
Fixes#12791.
Vapoursynth does not provide crop metadata and input one is likely to be
invalidated during filtering. Set crop to full frame if image dimensions
were changed during filtering.
Fixes: #12780
Previously, the av sync change calculation was only done if the
audio_status was STATUS_PLAYING, but there is at least one or two more
states where this should be done. player/audio is capable of adding
delay if the state is anything besides STATUS_EOF. This means that while
calling adjust_sync, the delay value could have changed from the audio
side of the equation from the previous playloop, and it doesn't
necessarily mean that the current audio_status is STATUS_PLAYING either.
So the old code would technically skip this case. In practice, this is
just one frame so it hardly matters, but it should be taken into
account. For example, STATUS_READY is definitely possible here in
adjust_sync. I'm not sure if it's actually possible for STATUS_SYNCING
to happen but the audio code can change add delay with that status, so
it doesn't hurt. STATUS_DRAINING is probably not relevant, but again
include it to mirror the audio code logic. Of course, STATUS_EOF is
obviously a no-no since that means no audio at all, so we return from
there. I didn't take hard measurements or anything, but this does seem
to result in slightly smaller av sync fluctuations on discontinuities
(like seeking) which makes sense because we're now making an additional
correction that wasn't previously done.
Another change is to always try adjust_sync as long as the frame_time is
nonzero. The old logic only did this if the video_status was playing or
greater, but it is possible to get new frames with a different PTS that
do not have that status. The audio is still playing so logically it
should be adjusted as well. Again, this happens for just one frame, so
it doesn't really matter in practice but it should make more sense. A
zero frame_time is skipped since that would mean the pts did not advance
and the previous playloop should have done the adjustment for that time
already.
3038e578af recently changed the logic here
so it wouldn't trigger on still images, but after thinking about the
code here some more, I don't believe it's needed at all. Doing an ao
reset when you flip the video track is very disruptive and not really
desirable at all. Since the ao no longer adds bogus delay values while
the video is off, there should be no need to do a full reset for syncing
reasons. The delay value will be zero, so we can let the audio just play
normally and let the video code do its thing. There is one slight trick
here however. When using a display sync mode, part of the syncing code
will try to update the audio and video playback speed. This can cause an
audio underrun if we're just turning the video back one. An easy way to
avoid most of these is to not update the speed if we are in the
STATUS_SYNCING state for video. This isn't quite perfect and underruns
are still possible, but it actually seems to depend on the AO. e.g. I
couldn't trigger an underrun with alsa but I could with pipewire. In any
case, the audio artifact here is much less noticeable than doing a full
ao reset, so it's still an improvement.
currently hysteresis-secs only works when the demuxer-max-bytes fills
up. but it's possible for the cache-secs/demuxer-readahead-secs to be
reached first.
in those cases, hysteresis-secs doesn't work and keeps buffering
non-stop. but the goal of this option was to save power by avoiding
non-stop buffering so go ahead and make it respect cache-secs as well.
additionally remove some redundant repetition from the docs.
5f74ed5828 deprecated this many years ago.
The utility is questionable at best given that -remove exists and is
more natural to use. Free up some code and drop it.
When using -remove with list options, it previously only removed the
first match. Technically, it is possible for there to be more than entry
with the same name. They should all be removed. key/value lists
specifically only allow unique keys so we don't need to do anything
there.
ytdl lists thumbnails in ascending order according to height/preference.
all_formats=yes adds formats from best to worst, so the same should also
be done for thumbnails.
yt-dlp has a preference field for it's thumbnails, and not all of it's
listed thumbnails have fields with their dimensions.
Therefore prefere the preference field when available and fall back to
height if it's not.
Since we can no longer rely on distuils for a version comparison, let's
modify the macos-sdk-version script so it returns multiple potential
versions to meson. Then use meson's built-in version comparison to pick
the right one instead. This avoids the complication of needing certain
python packages installed since everything simply uses stdlib functions.
Since distutils was dropped from python 3.12, we can't rely on a
standard library implementation for version comparison anymore hence
the switch to packaging instead which is essentially supposed to be the
replacement. This is problematic though because macOS can have several
ways of managing python can result in the build calling the wrong python
binary that doesn't have the actual packaging library installed. This
commit was a workaround for that since it would fetch the python used to
run the build (which is probably the one the user wants), but apparently
upstream doesn't like this and it's subject to change*. So instead,
let's solve try, and solve this a different way.
This reverts commit a57bd8e2b8.
*: https://github.com/mesonbuild/meson/pull/12116#pullrequestreview-1575846647
- Use import to find Python installation.
- Run macos-sdk-version.py with Python provided by meson.
This fixes an error when meson and python-packaging are installed from
Homebrew. Currently, the Python executable from python@3.12 is installed as
python3.12 so python3 is referring to system installation, which may not
have packaging module. meson can provide the correct executable via import.
This was originally for the waf build, and then later writing the output
to a file was added for meson. Since the waf build is no longer around
anymore, remove the dead code.
CLOCK_MONOTONIC_RAW is linux-specific (macOS later supported it but it
has its own timer code) and not neccessarily available everywhere like
on BSDs. It makes sense to prefer it because mpv does a lot of
measurements at small intervals (e.g. every frame) so theoretically it
should be more accurate. However if the OS doesn't have it, fallback to
CLOCK_MONOTONIC instead which is almost exactly the same and very widely
supported across unix-like systems. This clock is technically optional
according to POSIX, but any half-decent OS supports it anyway (sorry
Solaris users). As a benefit, we now know that the clock from mp_time is
always monotonic.
I'd like some names to be more descriptive, but to work with 15 chars
limit we have to make some sacrifice.
Also because of the limit, remove the `mpv/` prefix and prioritize
actuall thread name.
Python 3.10 deprecated disutils and then removed it in 3.12. The macos
sdk check uses the version compare from there, so it needs to be
replaced with something else. So instead use the API from the packaging
module which is also widely available and a fit replacement.
Fixes#12762.
dac977193c changed adding delay to only
when the video is playing but this isn't correct. The video frames
adjust themselves based on the audio, so if we still have audio
processing while the video itself happens to be in some non-playing
state (such as STATUS_READY), the delay still needs to be taken into
account. The correct thing to check is to make sure that it is not
STATUS_EOF. STATUS_EOF covers the case where we have still image, and of
course no video at all is STATUS_EOF. So having a massive bogus delay
value is still avoided.
ffmpeg is again setting the frame dimensions to the coded size, so we
need to reintroduce our work-around to get the logical frame dimensions
from the frames_ctx rather than the frame itself.
ffmpeg commit:
* 9ee4f47c94
This reverts commit c40bd88872.
The MPV_LEAK_REPORT environment variable was previously read in order to
determine whether or not to enable memory reporting for javascript
scripts. This is kind of weird and deviates from the norm of exposing an
option to the user. So let's just add --js-memory-report and disable it
by default instead.
--play-dir sounds like it has something to do with directories so change
it. The play_dir variable is used a bunch everywhere internally so
whatever just leave it alone instead of renaming that.
This option has exactly the same semantics are other mpv options that
override a particular thing with something from the user. So instead of
the "force-style" name, use "-overrides" which is more consistent.
The plural form is used since it's a list option.
Other similar options are in the form of --foo-override not
--override-foo. The display-fps one was backwards so flip it around the
other way for consistency reasons.
This better reflects what it actually does. As a bonus, script writers
won't be misled into thinking that fps displays the actual video or
display fps.
The point of the mpctx->delay field is for calculating a/v sync and
adjusting the frame timings appropriately. However, the frame_time was
always subtracted from mpctx->delay regardless of the audio status. This
meant that for a video with no audio, every single frame had a
subtraction with nothing ever added to it meaning that you get massive
negative delay times. For weird videos where the audio starts way later,
the massive delay leads to the VO sleeping for basically about as long
as the video was previously playing without audio. This results in
nothing being rendered during that brief period of time and just overall
badness. When using display-sync, it happens to work since the video
doesn't adjust itself based on audio and it renders anyway.
The fix is to simply not touch mpctx->delay in player/video.c unless
there's actually audio playing. This is what the rest of the code
already does aside from setting it to 0 on resets or EOFs. Move the
calculation into adjust_sync after the audio status check. It works
exactly the same as before except that we don't constantly subtract
bogus values when there's no audio playing. The reverse situation in
player/audio.c also has the same issue. For something that is only
audio, mpctx->delay is always added to but nothing will ever subtract
from it. It's not really clear if this particular version could ever
cause a real bug, but logically it needs to be guarded in the same way.
The field here should only be updated if the video is actually playing.
Fixes#12025.
The end position of the word to be completed is never used because all
patterns end with $. Remove it or it would complicate implementing
completers with more patterns.
