Broken drivers are an issue rather often. Maybe this gives the user an
idea that this could be the reason. (We can't dump much more info on a
80x24 terminal.)
In ancient times, this was needed because it was not default, and many
VOs had problems with it. But it was always default in mpv, and all VOs
are required to deal with it. Also, running --fixed-vo=no is not useful
and just creates weird corner cases. Get rid of it.
This reverts commit 7b3feecbc2.
It's broken, hr-seek never ends at a video position before seek pts.
Not sure what I was thinking, although it did work anyway when
artificially forcing a video frame to display before seek pts.
At least there is _some_ problem if this happens. It would mean that
audio is playing slower than video. Normally, video is synced to audio,
so if audio stops playback completely, video will not advance at all.
But using things like --autosync, it's well possible that this kind of
desync happens.
Move the update_avsync_before_frame() call further down. Moving it
closer to where the time_frame value is used (and which the function
updates) should make the code more readable. With this change, there's
no need anymore to reset the time_frame value on the video reconfig
path.
Move the update_avsync_after_frame() up. Now no meaningful amount of
time passes since the previous get_relative_time() call anymore, and the
second one can be removed.
mpctx->audio_delay always has the same value as opts->audio_delay. (This
was not the case a long time ago, when the audio-delay property didn't
actually write to opts->audio_delay. I think.)
This allows seeking audio between two video frames that are relatively
far away.
The implementation of this is a bit subtle. It pretend the audio
position is different, and the actual PTS adjustment happens in audio.c
with this line:
sync_pts -= mpctx->audio_delay - mpctx->delay;
Effectively this is the same as setting sync_pts to hrseek_pts after
this line, though. (I'm actually not sure if this could be written in a
more straightforward way; probably yes.)
We still need to send the VO a duration in these cases. Disabling
framedrop has logically absolutely nothing to do with these cases; it
was overlooked in commit 918b06c4.
So we always send the frame duration (or a guess for it), and check
whether framedropping is actually enabled in the VO code. (It would
be cleaner to send framedrop as a flag, but I don't care about that
right now.)
The last video frame is another case that has a separate code path,
although it's pretty similar to the one in commit 73e5aa87. Fix this
in a different way, which also takes care of the last frame case,
although without context the code becomes slightly more tricky.
As further cleanup, move the decision about framedropping itself to
the same place, so the check in vo.c becomes much simpler. The check
for the vo->driver->encode flag, which is remvoed completely, was
redundant too.
Fixes#1480.
If the video format changes (e.g. different frame size), a special code
path is entered to wait until the currently displayed frame is done.
Otherwise, the frame before the change would be destroyed by the
vo_reconfig() call.
This code path didn't respect --untimed; correct this.
Fixes#1475.
There are currently 568 pixel formats (actually fewer, but the namespace
is this big), and for each format elaborate synchronization was done to
call it synchronously on the VO. This is completely unnecessary, and we
can do with just a single call.
This is basically a hack; but apparently a needed one, since many
vapoursynth filters insist on having a FPS set.
We need to apply the FPS override before creating the filters. Also
change some terminal output related to the FPS value.
Most of this is explained in the code comments. This change should
improve performance with vapoursynth, especially if concurrent requests
are used.
This should change nothing if vf_vapoursynth is not in the filter chain,
since non-threaded filters obviously can not asynchronously finish
filtering of frames.
This adds API to libmpv that lets host applications use the mpv opengl
renderer. This is a more flexible (and possibly more portable) option to
foreign window embedding (via --wid).
This assumes that methods like context sharing and multithreaded OpenGL
rendering are infeasible, and that a way is needed to integrate it with
an application that uses a single thread to render everything.
Add an example that does this with QtQuick/qml. The example is
relatively lazy, but still shows how relatively simple the integration
is. The FBO indirection could probably be avoided, but would require
more work (and would probably lead to worse QtQuick integration, because
it would have to ignore transformations like rotation).
Because this makes mpv directly use the host application's OpenGL
context, there is no platform specific code involved in mpv, except
for hw decoding interop.
main.qml is derived from some Qt example.
The following things are still missing:
- a way to do better video timing
- expose GL renderer options, allow changing them at runtime
- support for color equalizer controls
- support for screenshots
It feels strange that seeking past EOF with --keep-open actually leaves
the player at a random position. You can't even unpause, because the
demuxer is in the EOF state, and what you see on screen is just what was
around before the seek.
Improve this by attempting to seek to the last video frame if EOF
happens. We explicitly don't do this if EOF was reached normally to
increase robustness (if the VO got a frame since the last seek, it
obviously means we had normal playback before EOF).
If an error happens when trying to find the last frame (such as not
actually finding a last frame because e.g. the demuxer misbehaves), this
will probably turn your CPU into a heater. There is no logic to prevent
reinitiating the last-frame search if the last-frame search reached EOF.
(Pausing usually prevents that EOF is reached again after a successful
last-frame search.)
Fixes#819.
In all of these situations, NULL is logically not allowed, making the
checks redundant.
Coverity complained about accessing the pointers before checking them
for NULL later.
This was shown only if decoder-framedropping was enabled, and only if at
least 50 frames were dropped by it. Since drop_frame_cnt used to mean
"number of late frames", this code made sense, but this is not the case
anymore: drop_frame_cnt can be even 0, all while video gets hopelessly
behind audio.
One problem with this is that short desync spikes (which usually can
probably dealt with) will also cause this message to be shown. If it
gets triggered too often, the code will need to be adjusted.
The player was supposed to exit playback if both video and audio failed
to initialize (or if one of the streams was not selected when the other
stream failed). This didn't work; for one this check was missing from
one of the failure paths. And more importantly, both checked the
current_track array incorrectly.
Fix these issues, and move the failure handling code into a common
function.
CC: @mpv-player/stable
This could produce an extra frame, because reaching the maximum merely
signals the playloop to exit, without strictly enforcing the limit.
Fixes#1181.
CC: @mpv-player/stable
For cover art, we pretend that the video stream is infinite, but also
stop decoding once we have an image on the VO (this seems advantageous
for the case when strange filters are inserted or the VO image gets
lost). Since a while ago, the video chain started decoding 2 images
though ("Non-monotonic video pts: 0.000000 <= 0.000000"), which is
annoying and wasteful.
Improve this by handling a certain corner case at initialization, which
will decode a second image while the first one is still stuck in the
filter chain. Also, just in case there are filters which buffer a lot,
also force EOF filtering (which means we tell the filters to flush
buffered frames).
CC: @mpv-player/stable
Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The
main use of this was that you could pass a bitmask of these flags to
uninit_player(). Except in some situations where you wanted to
uninitialize nearly everything, this wasn't really useful. Moreover, it
was quite annoying that subsystems had most of the code in a specific
file, but the uninit code in loadfile.c (because that's where
uninit_player() was implemented).
Simplify all this. Remove the flags; e.g. instead of testing for the
INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code
to separate functions, e.g. uninit_audio_out().
The messages "Audio: no audio" and "Video: no video" could be printed
twice each if initializing them failed. Prevent his silliness.
CC: @mpv-player/stable
We inserted these filters with fixed parameters, which was ok. But this
also didn't change image parameters for the filters down the filter
chain and the VO. For example, if rotation by 90° was requested by the
file, we would insert a filter and rotate the video, but the VO would
still receive image parameters that direct rotation by 90°.
This wasn't a problem, but it could become one.
Fix this by letting the filters automatically pick up the image params.
The image params are reset on application. (We could probably also
always try to apply and reset image params in a filter, instead of
having special "auto" parameters. This would probably work, and video.c
would insert a "rotate=0" filter. But I'm afraid this would be confusing
and the current solution is cosmetically slightly nicer.)
Unfortunately, the vf_stereo3d.c change turned out a big mess, but once
the "internal" filter is fully replaced with libavfilter, most of this
can be radically simplified.
There's no need to update OSD messages and the terminal status if nobody
is going to see it. Since the player doesn't block on video display
anymore, this update happens to often and probably burns slightly more
CPU than necessary. (OSD redrawing is handled separately, so it's just
mostly useless text processing and such.)
Change it so that it's updated only on every video frame or all 50ms
(whatever comes first).
For VO OSD, we could in theory try to lock to the OSD redraw heuristic
or the display refresh rate, but that's more complicated and doesn't
work for the terminal status.
We generally want 2 things:
1. minimal wakeups for decoding each frame
2. minimal number of frames decoded on continuous seeking
Commit 35810cb8 changed this a bit, and fixed 1. But it broke 2., and
now it decodes 2 frames instead of 1 when you keep seeking (arrow key
held down or such). This made seeking appear slower.
Fix this by making the logic more explicit. In particular, call the
filters only if we actually try to get a new frame.
When playing with --no-audio and all other distractions disabled (like
OSC), it still wakes up 2 times per frame - but the second time is
merely because the VO didn't accept the new frame yet.
Normally, feeding a packet to the decoder should always return a frame
_if_ we received a frame before. So while we can't know exactly whether
a frame was dropped, at least the normal case is easily detectable.
This means we display something closer to the actual framedrop count,
instead of a bad guess.
This is the "old" framedropping mode (derived from MPlayer). At least in
the mplayer2/mpv source base, it stopped working properly years ago (or
maybe it never worked properly). For one, it depends on the video
framerate, which assume constant framerate. Another problem was that it
could lead to freezing video display: video could get so much behind
that it couldn't recover from framedrop.
Make some small changes to improve this.
Don't use the current audio position to check how much we are behind.
Instead, use the last known A/V difference. last_av_difference is
updated only when a video frame is scheduled for display. This means we
can keep stop dropping once we're done catching up, even if video is
technically still behind. What helps us here that this forces a video
frame to be displayed after a while. Likewise, we reset the
dropped_frames count only when scheduling a new frame for display as
well.
Some inspiration was taken from earlier work by xnor (see issue #620),
although the implementation turned out quite different.
This still uses the demuxer-reported (possibly broken) FPS value. It
also doesn't account for filters changing FPS. We can't do much about
this, because without decoding _and_ filtering, we just can't know how
long a frame is. In theory, you could derive that from the raw packet
timestamps and the filter chain contents, but actually doing this is
too involved. Fortunately, the main thing the FPS affects is actually
the displayed framedrop count.
Rename video_decode_and_filter to video_filter, and add a new
video_decode_and_filter function. This function now calls the decoder.
This is done so that we can check filters a second time after decoding,
which avoids a useless playloop iteration.
(This and the previous commits are really just microoptimizations, which
simply reduce the number of times the playloop has to recheck
everything.)
Move the check to a function. Run the check a second time after
decoding/filtering. This second check is strictly speaking redundant
(which is why it wasn't done until now), but it avoids a useless
playloop iteration.
Move this code below the code that "shifts" the newly filtered frame.
This allows us to skip a useless playloop iteration later, because
obviously we need to filter a new frame after the previous frame has
been "shifted", and not before that.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
This shouldn't change anything functionally.
Change the A/V desync message. --framedrop is enabled by default now, so
the text must be changed a little. I've never heard of audio outputs
messing up A/V sync recently, so remove that part.
Remove the unused ao_pts field.
Reorder 2 A/V sync related expressions so that they look the same.
Commit 846257da introduced an accidental feature: if you kept seeking
(so playback never really resumes), the audio would never be played.
This was nice, but commit 4c25b000 accidentally removed it again (due
to the video_next_pts being earlier available than it used to be, so
audio could be played before the player executed the next queued seek).
Implicitly reintroduce the old behavior again by not decoding a second
video frame immediately. Usually, the second frame is used to compute
the frame duration needed to for accurate framedropping, but since the
first frame after a seek is never dropped, we don't need this.
Now the video code will queue the new frame to the VO immediately, and
since fill_audio_out_buffers() is called in the playloop before
write_video() and execute_queued_seek(), it never gets the chance to
enter STATUS_READY, and seeks will be silent.
This also has a nice side-effect: since the second frame is not decoded
and filtered, seeking becomes slightly faster (back to the same level
as with framedrop disabled).
It seems this still sometimes plays a period of audio when keeping a
seek key down. In my tests, this appeared to happen because the seek
finished before the next key repeat was sent.
Commit 5afc025c broke this. The reason is that mpctx->delay is updated
when a new video frame is added. This value is also needed to resync
audio, but it will be for the wrong PTS. They must be consistent with
each other, and if they aren't, initial sync will be off by N video
frames, which results at least in worse user experience.
This can be reproduced by for example heavily switching between normal
and 2x speed, or similar.
Fix by readding the video_next_pts field (keeping its use minimal,
instead of reverting the commit that removed it).
This simplifies the code, and fixes an odd bug: the second-last frame
was displayed for a very short duration if framedrop was enabled. The
reason was that basically the time difference between second-last and
last frame were skipped, because at this point EOF was already
signaled. Also see commit b0959488 for a similar issue in the
same code.
This removes the messiness of the next_frame 2-frame queue, and
strictly runs the "new frame" code when a frame is moved to the first
position of the queue, instead of somehow messing with return codes.
This also merges update_video() into video_output_image().
wm4
Julian