Normally, the cache keeps 50% of the buffer for seeking backwards. Until
now, the cache just used the full buffer size at the beginning of a
file, because the 50% normally reserved for the backbuffer are unused.
This caused a problem: when streaming from http, the player would first
read about 150MB (default cache size), then stop until 75MB of the cache
has been played. (Until the 75MB position, the cache is fully used, so
nothing new can be read. After that, part of the backbuffer starts
getting unreserved, and can be used for readahead.) This long read pause
can cause the server to terminate the connection. Reconnecting may be
possible, but if youtube-dl is used, the media URL may have become
invalid.
Fix this by limiting readahead to 50% even if unnecessary. The only
exception is when the whole file would fit in the cache. In this case,
it won't matter if we can't reconnect, because the cache covers
everything anyway, and hopefully the cache will stay valid.
Likely fixes#2000.
This must have been some non-sense in the original vaapi mplayer patch.
While I still have no good idea what this "direct mapping" business is
about, it appears to be pretty much pointless. Nothing can hold
additional "real" surface references (due to how the API and mpv/lavc
refcounting work), so removing the additional surfaces won't break
anything. It still could be that this was for achieving additional
buffering (not reusing surfaces as soon), but we buffer some additional
data anyway. Plus, the original intention of the vaapi mplayer code was
probably increasing surface count just by 1 or 2, not actually doubling
it, and/or it was a "trick" to get to the maximum count of 21 when h264
is in use.
gstreamer-vaapi uses "ref_frames + SCRATCH_SURFACES_COUNT" here, with
SCRATCH_SURFACES_COUNT defined to 4. It doesn't appear to check the
overlay attributes at all in the decoder.
In any case, remove this non-sense.
It polluted the global namespace, instead of exporting the function
properly.
For now, keep it compatible by explicitly keeping the bogus export.
Also fix a mistake in the manpage example.
On hw decoder reinit failure we did not actually always return a sw
format, because the first format (fmt[0]) is not always a sw format.
This broke some cases of fallback. We must go through the trouble to
determine the first actual sw format.
This reduces spam while preempted a bit.
The remaining message, "hardware accelerator failed to decode picture"
on every frame, can not be prevented because it's hardcoded in
libavcodec.
If gl_hwdec_driver.map_image fails, all textures will be set to 0. This
in turn makes pass_prepare_src_tex() skip generation of the texture
uniforms, which leads to a shader compilation error, as e.g. texture0 is
not defined but expected to exist and accessed.
Set the textures to an invalid non-0 ID instead. OpenGL can deal with
it.
Yet another of these dozens of hwaccel changes. This time, libavcodec
provides utility functions, which initialize the vdpau decoder and map
codec profiles. So a lot of work the API user had to do falls away.
This also will give us support for high bit depth profiles, and possibly
HEVC once libavcodec supports it.
...instead of relying on the hw decoding API to align it for us. The old
method could in theory have gone wrong if the video is cropped by an
amount large enough to step over several blocks.
Always configure the vdpau mixer based on the current surface sent to
it. Before this, we just hardcoded the chroma type, and the surface size
was essentially a guess.
Calling VdpVideoSurfaceGetParameters() on every surface is a bit
suspicious, but it appears it's a cheap function (just requiring some
locks and a table lookup). This way we avoid creating another
complicated mechanism to carry around the actual surface parameters
with a mp_image/AVFrame.
There's not much of a reason to keep get_surface_hwdec() and
get_buffer2_hwdec() separate. Actually, the way the mpi->AVFrame
referencing is done makes this confusing. The separation is probably
an artifact of the pre-libavcodec-refcounting compatibility glue.
Most of hardware decoding is initialized lazily. When the first packet
is parsed, libavcodec will call get_format() to check whether hw or sw
decoding is wanted. Until now, we've returned AV_PIX_FMT_NONE from
get_format() if hw decoder initialization failed. This caused the
avcodec_decode_video2() call to fail, which in turn let us trigger the
fallback. We didn't return a sw format from get_format(), because we
didn't want to continue decoding at all. (The reason being that full
reinitialization is more robust when continuing sw decoding.)
This has some disadvantages. libavcodec vomited some unwanted error
messages. Sometimes the failures are more severe, like it happened with
HEVC. In this case, the error code path simply acted up in a way that
was extremely inconvenient (and had to be fixed by myself). In general,
libavcodec is not designed to fallback this way.
Make it a bit less violent from the API usage point of view. Return a sw
format if hw decoder initialization fails. In this case, we let
get_buffer2() call avcodec_default_get_buffer2() as well. libavcodec is
allowed to perform its own sw fallback. But once the decode function
returns, we do the full reinitialization we wanted to do.
The result is that the fallback is more robust, and doesn't trigger any
decoder error codepaths or messages either. Change our own fallback
message to a warning, since there are no other messages with error
severity anymore.
Vobsubs come as .idx/.sub pair of files. The .idx file is the one that
should be opened, but the name of the .sub file is unknown. We can now
make our own guess what the name of that file is. In particular, improve
support with URLs (as these can have the file extension in the middle of
the filename string if there are HTTP parameters).
Note that this works only with newer ffmpeg versions, because the
recently added sub_name demuxer option is used for this.
This command has been deprecated in the 0.8.x and 0.9.x releases - get
rid of it. Its only point ever was MPlayer compatibility, which broke
years ago anyway.
They're completely orthogonal concepts, merged in the past due to
convenience and ease of implementing it in the old #ifdef hell renderer.
Especially after the CMS stuff was generalized by 634b4a, this was a
trivial change to implement and also means color management will be much
higher quality when enabled with vo=opengl (which had quantization
issues in the past due to the 8 bit FBO format and upscaling), since it
can be done in a single pass now.
While all functions of input_ctx are inherently thread-safe, access to
the _inputContext field itself is not. It could be unset any time by
cocoa_set_input_context(). So even trivial input_ctx calls must be under
a lock, so that the input_ctx can not be destroyed while the function
call is "starting". (Even a function call in progress wouldn't be fine,
because mp_input_uninit() requires the caller to "own" the object, i.e.
no other threads can access it at this point.)
For certain reasons, we allow adding external tracks even before the
main file is loaded. This somewhat breaks in old assumption, which uses
mpctx->num_sources to determine whether a command can be applied in the
current state. Use the newer playback_initialized instead, which is a
much better choice for this purpose.
The previous commit removed this. Although mp_switch_track() can now be
called in all situations, we still don't want it to be called here.
Setting a track property while no file is loaded would simply deselect
the track instead of setting the underlying option to the requested
value.
Likewise, if the "cycle" command (M_PROPERTY_SWITCH) is used, don't just
deselect the track.
Adding an external audio track before loading the main file didn't work
right. For one, mp_switch_track() assumes it is called after the main
file is loaded. (The difference is that decoders are only initialized
once the main file is loaded, and we avoid doing this before that for
whatever reason.)
To avoid further messiness, just allow mp_switch_track() to be called at
any time. Also make it do what mp_mark_user_track_selection() did, since
the latter requires current_track to be set. (One could probably simply
allow current_track to be set at this point, but it'd interfere with
default track selection anyway and thus would be pointless.)
Fixes#1984.
Wnile it seems quite logical to me that commands use _ as word
separator, while properties use -, I can't really explain the
difference, and it tends to confuse users as well. So always
prefer - as separator for everything.
Using _ still works, and will probably forever. Not doing so would
probably create too much chaos and confusion.
