If the "default" device refuses to be opened as spdif device (i.e. it
errors due to the AES0 etc. parameters), we were falling back to the
iec958 device. This is needed on some systems for smooth operation with
PCM vs. spdif.
Now change it to try "hdmi" before "iec958", which supposedly helps in
other situations.
Better suggestions welcome. Apparently kodi does this too, although I
didn't check directly.
The player tries to avoid splitting frames with spdif (sample alignment
stuff). This can in certain corner cases with certain drivers lead to
the situation that ao_get_space() returns a number higher than 0 and
lower than the audio frame size. The playloop will round this down to 0
bytes and do nothing, leading to a missed wakeup. This can lead to
underruns or playback completely getting stuck.
It can be reproduced by playing AC3 passthrough with no video and:
--ao=null --ao-null-buffer=0.256 --ao-null-outburst=6100
This commit attempts to fix it by allowing the playloop to write some
additional data (to get a complete frame), that will be buffered within
the AO ringbuffer even if the audio device doesn't want it.
We always want to use __declspec(selectany) to declare GUIDs, but
manually including <initguid.h> in every file that used GUIDs was
error-prone. Since all <initguid.h> does is define INITGUID and include
<guiddef.h>, we can remove all references to <initguid.h> and just
compile with -DINITGUID to get the same effect.
Also, this partially reverts 622bcb0 by re-adding libuuid.a to the
build, since apparently some GUIDs (such as GUID_NULL) are not declared
in the source file, even when INITGUID is set.
There were multiple values under M_OPT_EXIT (M_OPT_EXIT-n for n>=0).
Somehow M_OPT_EXIT-n either meant error code n (with n==0 no error?), or
the number of option valus consumed (0 or 1). The latter is MPlayer
legacy, which left it to the option type parsers to determine whether an
option took a value or not. All of this was changed in mpv, by requiring
the user to use explicit syntax ("--opt=val" instead of "-opt val").
In any case, the n value wasn't even used (anymore), so rip this all
out. Now M_OPT_EXIT-1 doesn't mean anything, and could be used by a new
error code.
Currently, calling mp_input_wakeup() will wake up the core thread (also
called the playloop). This seems odd, but currently the core indeed
calls mp_input_wait() when it has nothing more to do. It's done this way
because MPlayer used input_ctx as central "mainloop".
This is probably going to change. Remove direct calls to this function,
and replace it with mp_wakeup_core() calls. ao and vo are changed to use
opaque callbacks and not use input_ctx for this purpose. Other code
already uses opaque callbacks, or has legitimate reasons to use
input_ctx directly (such as sending actual user input).
The first one is printed even if the user disabled video (or there's no
video), so just remove it. The second one uses deprecated sub-option
syntax, so remove that as well.
And introduce a global option which does this. Or more precisely, this
deprecates the global wasapi and coreaudio options, and adds a new one
that merges their functionality. (Due to the way the sub-option
deprecation mechanism works, this is simpler.)
I decided that it's too much work to convert all the VO/AOs to the new
option system manually at once. So here's a shitty hack instead, which
achieves almost the same thing. (The only user-visible difference is
that e.g. --vo=name:help will list the sub-options normally, instead of
showing them as deprecation placeholders. Also, the sub-option parser
will verify each option normally, instead of deferring to the global
option parser.)
Another advantage is that once we drop the deprecated options,
converting the remaining things will be easier, because we obviously
don't need to add the compatibility hacks.
Using this mechanism is separate in the next commit to keep the diff
noise down.
Instead of requiring each VO or AO to manually add members to MPOpts and
the global option table, make it possible to register them automatically
via vo_driver/ao_driver.global_opts members. This avoids modifying
options.c/options.h every time, including having to duplicate the exact
ifdeffery used to enable a driver.
Normally I'd prefer a bunch of smaller functions with fewer parameters
over a single function with a lot of parameters. But future changes will
require messing with the parameters in a slightly more complex way, so a
combined function will be needed anyway. The now-unused "global"
parameter is required for later as well.
Positional parameters cause problems because they can be ambiguous with
flag options. If a flag option is removed or turned into a non-flag
option, it'll usually be interpreted as value for the first sub-option
(as positional parameter), resulting in very confusing error messages.
This changes it into a simple "option not found" error.
I don't expect that anyone really used positional parameters with --vo
or --ao. Although the docs for --ao=pulse seem to encourage positional
parameters for the host/sink options, which means it could possibly
annoy some PulseAudio users.
--vf and --af are still mostly used with positional parameters, so this
must be a configurable option in the option parser.
With the previous commit, ao_alsa.c now has 3 possible ways to pause
playback. Actually all 3 of them need get_delay() to fake its return
value, so don't duplicate that code.
Also much of the code looks a bit questionable when considering
inconsistent pause/resume calls from outside, so ignore redundant calls.
push.c does not handle this automatically, and AOs using push.c have to
handle it themselves. Also, ALSA is low-level enough that it needs
explicit support in user code. At least I haven't found any option that
does this.
We still can get away relatively cheaply by abusing underflow-handling
for this. ao_alsa.c already configures ALSA to handle underflows by
playing silence. So we purposely induce an underflow when opening the
device, as well as when pausing or resetting the device.
This introduces minor misbehavior: it doesn't account for the additional
delay the initial silence adds, unless the device has fully played the
fragment of silence when the player starts sending data to it. But
nobody cares.
Exactly the same situation as with ao_alsa in commit 0b144eac (except
that we can detect the situation better under wasapi).
Essentially, wasapi will allow us to output any sample format, and not
just the one configured by the user in the audio system settings.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
When selecting a device that simply doesn't exist with --audio-device,
AudioUnit will still initialize and start playback without complaining.
But it will never call the audio render callback, which leads to audio
playback simply not progressing.
I couldn't find a way to get AudioUnit to report an error at all, so
here's a crappy hack that takes care of this in most cases. We assume
that all devices have a kAudioDevicePropertyDeviceIsAlive property.
Invalid devices will error when querying the property (with 'obj!' as
status code).
This is not the correct fix, because we try to double-guess AudioUnit's
behavior by accessing a lower label API. Suggestions welcome.
This helps with shitty APIs and even shittier drivers (I'm looking at
you, ALSA). Sometimes they won't send proper wakeups. This can be fine
during playback, when for example playing video, because mpv still will
wakeup the AO outside of its own wakeup mechanisms when sending new data
to it. But when draining, it entirely relies on the driver's wakeup
mechanism. So when the driver wakeup mechanism didn't work, it could
hard freeze while waiting for the audio thread to play the rest of the
data.
Avoid this by waiting for an upper bound. We set this upper bound at the
total mpv audio buffer size plus 1 second. We don't use the get_delay
value, because the audio API could return crap for it, and we're being
paranoid here. I couldn't confirm whether this works correctly, because
my driver issue fixed itself.
(In the case that happened to me, the driver somehow stopped getting
interrupts. aplay froze instead of playing audio, and playing audio-only
files resulted in a chop party. Video worked, for reasons mentioned
above, but drainign froze hard. The driver problem was solved when
closing all audio output streams in the system. Might have been a dmix
related problem too.)
When we're draining, don't wakeup the core on every buffer fill, since
unlike during normal playback, we won't actually get more data. The
wakeup here conceptually works like wakeups with condition variables, so
redundant wakeups do not hurt, so this is just a minor change and
nothing of consequence.
(Final EOF also requires waking up the core, but there is separate code
to send this notification.)
Also dump the p->still_playing field in trace logging.
For clang, it's enough to just put (void) around usages we are
intentionally ignoring the result of.
Since GCC does not seem to want to respect this decision, we are forced
to disable the warning globally.
Since the main thread is shared by other things in the player, using STA (single
threaded aparement) may have caused problems. Instead initialize in MTA
(multithreaded apartment).
This reportedly makes it work on ODROID-C2. The idea for this hack is
taken from kodi; they unconditionally set some or all of those flags.
I don't trust ALSA enough to hope that setting these flags couldn't
break something else, so we try without them first.
It's not clear whether this is a driver bug or a bug in the ALSA libs.
There is no ALSA bug tracker (the ALSA website has had a dead link to
a deleted bug tracker fo years). There's not much we can do other than
piling up ridiculous hacks. At least I think that at this point invalid
API usage by mpv can be excluded as a cause.
ALSA might be the worst audio API ever.
Including initguid.h at the top of a file that uses references to GUIDs
causes the GUIDs to be declared globally with __declspec(selectany). The
'selectany' attribute tells the linker to consolidate multiple
definitions of each GUID, which would be great except that, in Cygwin
and MinGW GCC 6.1, this method of linking makes the GUIDs conflict with
the ones declared in libuuid.a.
Since initguid.h obsoletes libuuid.a in modern compilers that support
__declspec(selectany), add initguid.h to all files that use GUIDs and
remove libuuid.a from the build.
Fixes#3097
Setting this here is a race condition. It's called from a CoreAudio
callbacks, and there are no locks. It's a string, so this can be
potentially severe.
It's hard to fix and only CoreAudio supported it, so remove it.
This causes the "audio-out-detected-device" property to return nothing
on all platforms.
