Get rid of the strange and messy reliance on DEMUXER_TYPE_ constants.
Instead of having two open functions for the demuxer callbacks (which
somehow are both optional, but you can also decide to implement both...),
just have one function. This function takes a parameter that tells the
demuxer how strictly it should check for the file headers. This is a
nice simplification and allows more flexibility.
Remove the file extension code. This literally did nothing (anymore).
Change demux_lavf so that we check our other builtin demuxers first
before libavformat tries to guess by file extension.
Add this option, which lets users set the cache size without forcing it
even when playing from the local filesystem.
Also document the default value explicitly.
The Matroska linked segments case is slightly simplified: they can
never come from network (mostly because it'd be insane, and we can't
even list files from network sources), so the cache will never be
enabled automatically.
Delete demux_avi, demux_asf, demux_mpg, demux_ts. libavformat does
better than them (except in rare corner cases), and the demuxers have
a bad influence on the rest of the code. Often they don't output
proper packets, and require additional audio and video parsing. Most
work only in --no-correct-pts mode.
Remove them to facilitate further cleanups.
stream_vstream.c in particular was actually dependent on the network
code, and didn't compile anymore.
Cleanup the protocol list in mpv.rst, and add some missing ones
supported by libavformat to stream_lavf.c.
This commit removes the "old" networking code in favor of libavformat's
code.
The code was still used for mp_http, udp, ftp, cddb. http has been
mapped to libavformat's http support since approximately 6 months ago.
udp and ftp have support in ffmpeg (though ftp was added only last
month). cddb support is removed with this commit - it's probably not
important and rarely used if at all, so we don't care about it.
percent-pos was an integer (0-100). Sometimes higher precision is
wanted, but the property is this way because fractional parts would
look silly with normal OSD usage. As a compromise, make percent-pos
double (i.e. includes fractional parts), but print it as integer.
So ${percent-pos} is like an integer, but not ${=percent-pos}.
Use the video decoder chroma location flags and render chroma locations
other than centered. Until now, we've always used the intuitive and
obvious centered chroma location, but H.264 uses something else.
FFmpeg provides a small overview in libavcodec/avcodec.h:
-----------
/**
* X X 3 4 X X are luma samples,
* 1 2 1-6 are possible chroma positions
* X X 5 6 X 0 is undefined/unknown position
*/
enum AVChromaLocation{
AVCHROMA_LOC_UNSPECIFIED = 0,
AVCHROMA_LOC_LEFT = 1, ///< mpeg2/4, h264 default
AVCHROMA_LOC_CENTER = 2, ///< mpeg1, jpeg, h263
AVCHROMA_LOC_TOPLEFT = 3, ///< DV
AVCHROMA_LOC_TOP = 4,
AVCHROMA_LOC_BOTTOMLEFT = 5,
AVCHROMA_LOC_BOTTOM = 6,
AVCHROMA_LOC_NB , ///< Not part of ABI
};
-----------
The visual difference is literally minimal, but since videophiles
apparently consider this detail as quality mark of a video renderer,
support it anyway. We don't bother with chroma locations other than
centered and left, though.
Not sure about correctness, but it's probably ok.
This adds support for libquvi 0.9.x, and these features:
- start time (part of youtube URL)
- youtube subtitles
- alternative source switching ('l' and 'L' keys)
- youtube playlists
Note that libquvi 0.9 is still in development. Although this seems to
be API stable now, it looks like there will be a 1.0 release, which is
supposed to be the next stable release and the actual successor of
libquvi 0.4.x.
Should we actually get into trouble for unproper handling of
frame-based subtitle formats, this might be the simplest way to
work this around. Also is a bit more intuitive than -subfps, which
might use an unknown, misdetected, or non-sense video FPS.
Still pretty silly, though.
This code was once part of subreader.c, then traveled to libass, and now
made its way back to the fork of the fork of the original code, MPlayer.
It works pretty much the same as subreader.c, except that we have to
concatenate some packets to do auto-detection. This is rather annoying,
but for all we know the actual source file could be a binary format.
Unlike subreader.c, the iconv context is reopened on each packet. This
is simpler, and with respect to multibyte encodings, more robust.
Reopening is probably not a very fast, but I suspect subtitle charset
conversion is not an operation that happens often or has to be fast.
Also, this auto-detection is disabled for microdvd - this is the only
format we know that has binary data in its packets, but is actually
decoded to text. FFmpeg doesn't really allow us to solve this properly,
because a) the input packets can be binary, and b) the output will be
checked whether it's UTF-8, and if it's not, the output is thrown away
and an error message is printed. We could just recode the decoded
subtitles before sd_ass if it weren't for that.
demux_libass.c allows us to make subtitle format detection part of the
normal file loading process. libass has no probe function, but trying to
load the start of a file (the first 4 KB) is good enough. Hope that
libass can even handle random binary input gracefully without printing
stupid log messages, and that the libass parser doesn't accept too many
non-ASS files as input.
This doesn't handle the -subcp option correctly yet. This will be fixed
later.
This fixes the -subfps option (which unfortunately is still useful),
and fixes minor annoying timing errors (which unfortunately still
happen).
Note that none of these affect ASS or image subtitles. ASS is specially
handled: libass loads subtitles as ASS_Track. There are no actual
packets passed around, and sd_ass just uses the ASS_Track.
Disable the --sub-no-text-pp option. It's misleading now and always was
completely useless.
Basically rewrite all the code supporting the cache (i.e. anything other
than the ringbuffer logic). The underlying design is untouched.
Note that the old cache2.c (on which this code is based) already had a
threading implementation. This was mostly unused on Linux, and had some
problems, such as using shared volatile variables for communication and
uninterruptible timeouts, instead of using locks for synchronization.
This commit does use proper locking, while still retaining the way the
old cache worked. It's basically a big refactor.
Simplify the code too. Since we don't need to copy stream ctrl args
anymore (we're always guaranteed a shared address space now), lots of
annoying code just goes away. Likewise, we don't need to care about
sector sizes. The cache uses the high-level stream API to read from
other streams, and sector sizes are handled transparently.
The core didn't use these fields, and use of them was inconsistent
accross AOs. Some didn't use them at all. Some only set them; the values
were completely unused by the core. Some made full use of them.
Remove these fields. In places where they are still needed, make them
private AO state.
Remove the --abs option. It set the buffer size for ao_oss and ao_dsound
(being ignored by all other AOs), and was already marked as obsolete. If
it turns out that it's still needed for ao_oss or ao_dsound, their
default buffer sizes could be adjusted, and if even that doesn't help,
AO suboptions could be added in these cases.
This allows having properties like time-pos in the window title update
properly. There is a danger of this causing significant CPU usage,
depending on the properties used and the window manager.
The use of filters prior to PNG compression can greatly improve
compression ratio, with "mixed" (ImageMagick calls it "adaptive")
typically achieving the best results.
Use the recently introduced screensaver VOCTRLs to control the
screensaver in the X11 backend. This means the behavior when paused
changes: the old code always kept the screensaver disabled, but now the
screensaver is reenabled on pausing.
Rename the --stop-xscreensaver option to --stop-screensaver and make it
more generic. Now it affects all backends that respond to the
screensaver VOCTRLs.
Whatever this was supposed to be originally, it doesn't have much value
anymore. It just forced ad_mpg123 to upmix mono to stereo by default
(the audio chain can do that). As an option, it was mostly useless and
misleading, so get rid of it.
The additional flags are needed to get the muxer to write the source
video frame rate (instead of a fallback) for 100% equivalence to the
replaced MPlayer/mplayer2 y4m writer.
show_chapters, show_tracks, and show_playlist are killed and replaced
with the properties chapter-list, track-list, and playlist. The code
and the output of these stays the same, this is just moving a lot of
code around and reducing the number of properties.
The "old" commands will still be supported for a while (to avoid making
everyone angry), so handle them with the legacy layer. Add something to
suppress printing the legacy warnings for these commands.
This commit addresses some issues with the users had with the previous
implementation in commit c39efb9. Here's the changes:
* Use Quartz Event Taps to remove Media Key events mpv handles from
the global OS X queue. This prevents conflicts with iTunes. I did this on
the main thread since it is mostly idling. It's the playloop thread that
actually does all the work so there is no danger of blocking the event tap
callback.
* Introduce `--no-media-keys` switch so that users can disable all of mpv's
media key handling at runtime (some prefer iTunes for example).
* Use mpv's bindings so that users can customize what the media keys do via
input.conf. Current bindings are:
MK_PLAY cycle pause
MK_PREV playlist_prev
MK_NEXT playlist_next
An additional benefit of this implementation is that it is completly handled
by the `macosx_events` file instead of `macosx_application` making the
project organization more straightforward.
This branch heavily refactors the subtitle code (both loading and
rendering), and adds support for a few new formats through FFmpeg.
We don't remove any of the old code yet. There are still some subtleties
related to subreader.c to be resolved: code page detection & conversion,
timing post-processing, UTF-16 subtitle support, support for the -subfps
option. Also, SRT reading and loading ASS via libass should be turned
into proper demuxers. (SRT is needed because Libav's is gravely broken,
and we want ASS loading via libass to cover full libass format support.
Both should be demuxers which are probed _before_ libavformat, so that
all subtitles can be loaded through the demuxer infrastructure, and
libavformat subtitles don't need to be treated in a special way.)
The -no-ass option used to disable all use of libass completely. This
doesn't work this way anymore, and the text subtitle path has an
inherent dependency on libass. Currently -no-ass does 3 things:
1. Strip tags and formatting on display, and use a separate renderer for
the result. (Which might be the terminal, or libass via OSD code.)
2. Not loading attached fonts from Matroska files.
3. Use subreader.c instead of libass for reading .ass files.
1. and 2. are ok and what the user (probably wants), but 3. doesn't
really make sense anymore. subreader.c reads .ass files just fine, but
then does some strange things to them (something about coalescing and
re-adding newlines?), leading to even more broken display with -no-ass.
Instead of fighting with subreader.c, just use libass as loader.
After killing the non functional AR support in c8fd9e5 I got much complaints so
this adds AR support back in (and it works). I am using the HIDRemote class by
Felix Schwarz and that part of the code is under the BSD license. I slightly
modified it replacing [NSApplication sharedApplication] with NSApp. The code
of the class is quite complex (probably because it had to deal with all the
edge cases with IOKit) but it works nicely as a black box.
In a later commit I'll remove the deprecation warnings caused by HIDRemote's
usage of Gestalt.
Check out `etc/input.conf` for the default bindings.
Apple Remote functionality is automatically compiled in when cocoa is enabled.
It can be disabled at runtime with the `--no-ar` option.
Most of these are rather questionable, the rest you rarely need to set
manually. You still can set all of them with -lavdopts-o (because
libavcodec has AVOptions for them).
This can control whether demux_lavf should use the HTTP mime type to
determine the format, instead of probing the data with the libavformat
API. Do this to allow easier debugging in case the mimetype is
incorrect. (This is done only for AAC streams right now.)
This is basically a "do not use" label. We don't remove them yet,
because we still support FFmpeg releases where we can not use
libavfilter for various reasons. Also, Libav causes pain as usual
due to the lack of ported mplayer filters in its codebase, so not
all filters will be available there.
Use a different algorithm to generate the dithering matrix. This
looks much better than the previous ordered dither matrix with its
cross-hatch artifacts.
The matrix generation algorithm as well as its implementation was
contributed by Wessel Dankers aka Fruit. The code in dither.c is
his implementation, reformatted and with static global variables
removed by me.
The new matrix is uploaded as float texture - before this commit, it
was a normal integer fixed point matrix. This means dithering will
be disabled on systems without float textures.
The size of the dithering matrix can be configured, as the matrix is
generated at runtime. The generation of the matrix can take rather
long, and is already unacceptable with size 8. The default is at 6,
which takes about 100 ms on a Core2 Duo system with dither.c compiled
at -O2, which I consider just about acceptable.
The old ordered dithering is still available and can be selected by
putting the dither=ordered sub-option. The ordered dither matrix
generation code was moved to dither.c. This function was originally
written by Uoti Urpala.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
Can be used to refer to filters by name. Intended to be used when the
filter chain is changed at runtime.
A label can be assigned to a filter by prefixing it with '@name:', where
'name' is an user-chosen identifier. For example, a filter added with
'-vf-add @label1:gradfun=123' can be removed with '-vf-del @label1'.
If a filter with an already existing label is added, the existing filter
is replaced with the new filter (this happens for both -vf-add and
-vf-pre). If a filter is replaced, the new filter takes the position of
the old filter, instead of being appended/prepended to the filter chain
as usual. For -vf-toggle, labels are compared if at least one of the
filters has a label; otherwise they are compared by filter name and
arguments (like before). This means two filters are never considered
equal if one has a label and the other one does not.
Also add a "raw" prefix for commands, which prevents property expansion.
The idea is that if the commands are generated by a program, it doesn't
have to know whether the command expands properties or not.
Add the "vf" command, which allows changing the video filter chain at
runtime. For example, the 'y' key could be bound to toggle deinterlacing
by adding 'y vf toggle yadif' to the input.conf.
Reconfiguring the video filter chain normally resets the VO, so that it
will be "stuck" until a new video frame is rendered. To mitigate this, a
seek to the current position is issued when the filter chain is changed.
This is done only if playback is paused, because normal playback will
show an actual new frame quickly enough.
If vdpau hardware decoding is used, filter insertion (whether it fails
or not) will break the video for a while. This is because vo_vdpau
resets decoding related things on vo_config().
Apparently useful for dumping DVD. Could also be used to rip streams
with libquvi and such, but for that there are better tools. Actually
I doubt there aren't better tools to dump DVDs, but whatever, this was
a feature request, so I don't need a good reason.
This adds Mission Control fullscreen functionality to mpv. Since this doesn't
play well with many of mpv's features disable it by default. Users can activate
this feature by using `--native-fs` when starting mpv.
Fixes#34
A "watch later" command is now mapped to Shift+Q. This quits the player
and stores the playback state in a config file in ~/.mpv/watch_later/.
When calling the player with the same file again, playback is resumed
at that time position.
It's also possible to make mpv save playback state always on quit with
the --save-position-on-quit option. Likewise, resuming can be disabled
with the --no-resume-playback option.
This also attempts to save some playback parameters, like fullscreen
state or track selection. This will unconditionally override config
settings and command line options (which is probably not what you would
expect, but in general nobody will really care about this). Some things
are not backed up, because that would cause various problems. Additional
subtitle files, video filters, etc. are not stored because that would be
too hard and fragile. Volume/mute state are not stored because it would
mess up if the system mixer is used, or if the system mixer was
readjusted in the meantime.
Basically, the tradeoff between perfect state restoration and
complexity/fragility makes it not worth to attempt to implement
it perfectly, even if the result is a little bit inconsistent.
This is an attempt to make quoting of sub-option values less awkward,
even if it works only with some shells. This is needed mainly for
vf_lavfi. Also update the vf_lavfi manpage section.
Allows stepping back one frame via the frame_back_step inout command,
bound to "," by default.
This uses the precise seeking facility, and a perfect frame index built
on the fly. The index is built during playback and precise seeking, and
contains (as of this commit) the last 100 displayed or skipped frames.
This index is used to find the PTS of the previous frame, which is then
used as target for a precise seek. If no PTS is found, the core attempts
to do a seek before the current frame, and skip decoded frames until the
current frame is reached; this will create a sufficient index and the
normal backstep algorithm can be applied.
This can be rather slow. The worst case for backstepping is about the
same as the worst case for precise seeking if the previous frame can be
deduced from the index. If not, the worst case will be twice as slow.
There's also some minor danger that the index is incorrect in case
framedropping is involved. For framedropping due to --framedrop, this
problem is ignored (use of --framedrop is discouraged anyway). For
framedropping during precise seeking (done to make it faster), we try
to not add frames to the index that are produced when this can happen.
I'm not sure how well that works (or if the logic is sane), and it's
sure to break with some video filters. In the worst case, backstepping
might silently skip frames if you backstep after a user-initiated
precise seek. (Precise seeks to do indexing are not affected.)
Likewise, video filters that somehow change timing of frames and do not
do this in a deterministic way (i.e. if you seek to a position, frames
with different timings are produced than when the position is reached
during normal playback) will make backstepping silently jump to the
wrong frame. Enabling/disabling filters during playback (like for
example deinterlacing) will have similar bad effects.
Background: slice support has been completely removed, because it
doesn't work with multithreading, and provides a rather bad complexity
to performance tradeoff otherwise.
This allows things like:
'--vf=lavfi="gradfun=20:30"'
Adjust the documentation for vf_lavfi to make the example less verbose.
As an unrelated change, add a general description to vf_lavfi.
Requires recent FFmpeg/Libav git versions. Earlier versions will not
be supported, as the API is different. (A libavfilter version that
uses AVFrame instead of AVFilterBuffer is needed.)
Note that this is sort of useless, because the option parser prevents
you from making use of the full libavfilter graph syntax. This has to be
fixed later.
Most of the filter creation code (half of the config() function) has
been taken from avplay.c.
This code is not based on MPlayer's vf_lavfi. The MPlayer code doesn't
compile as it hasn't been updated through multiple libavfilter API
changes, making it completely useless as a starting point.
These require bleeding edge libass (latest git version), and will be
ignored otherwise.
I'm not sure about the blur factor and scaling. The ASS/VSFilter
semantics for blur scaling are a bad mess. Might require further
investigation.
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
The only thing this option did was changing the behavior of af_volume.
The option decided what sample format af_volume would use, but only if
the sample format was not already float. If the option was set, it would
default to float, otherwise to S16.
Remove use of the option and all associated code, and make af_volume
always use float (unless a af_volume specific sub-option is set).
Silence maximum value tracking. This message is printed when the filter
is destroyed, and it's slightly annoying. Was enabled due to enabling
float by default.
This option can be used to selectively reset settings when playing the
next file in the playlist (i.e. restore mplayer and mplayer2 behavior).
Might remove this option again should it turn out that nobody uses it.
Makes sure that seeking to a given time position shows the subtitle at
that position. This can fail if the subtitle packet is not close enough
to the seek target. Always enabled for hr-seeks, and can be manually
enabled for normal seeks with --mkv-subtitle-preroll.
This helps displaying subtitles correctly with ordered chapters. When
switching ordered chapter segments, a seek is performed. If the subtitle
is timed slightly before the start of the segment, it normally won't be
demuxed. This is a problem with all seeks, but in this case normal
playback is affected. Since switching segments always uses hr-seeks,
the code added by this commit is always active in this situation.
If no subtitles are selected or the subtitles come from an external
file, the demuxer should behave exactly as before this commit.
The OSX part of the Apple Remote was unmaintained for a long time and was not
working anymore. I tried to update the cookies to what the current versions of
OS X expect without much luck. I decided to remove it since Apple is not
including the IR receiver anymore in new hardware and it's clear that wifi
based remotes are the way to go.
A third party iOS app should be used in it's place. In the future we could look
into having a dedicated iOS Remote Control app like VLC and XBMC do.
The Linux side (`appleir.c`) was relatively tidy but it looks like LIRC can be
configured to work with any version of Apple Remote [1] and is more maintained.
[1] LIRC Apple Remote configs: http://lirc.sourceforge.net/remotes/apple/
Drawing the bar with vector drawings (instead with characters from the
OSD font) offers more flexibility and looks better. This also adds
chapter marks to the OSD bar, which are visible as small triangles on
the top and bottom inner border of the bar.
Change the default position of the OSD bar below the center of the
screen. This is less annoying than putting the bar directly into the
center of the view, where it obscures the video. The new position is
not quite on the bottom of the screen to avoid collisions with
subtitles.
The old centered position can be forced with ``--osd-bar-align-y=0``.
Also make it possible to change the OSD bar width/height with the new
--osd-bar-w and --osd-bar-h options.
It's possible that the new OSD bar renders much slower than the old
one. There are two reasons for this: 1. the character based bar
allowed libass to cache each character, while the vector drawing forces
it to redraw every time the bar position changes. 2., the bar position
is updated at a much higher granularity (the bar position is passed
along as float instead of as integer in the range 0-100, so the bar
will be updated on every single video frame).
Allows playing video with alpha information on X11, as long as the video
contains alpha and the window manager does compositing. See vo.rst.
Whether a window can be transparent is decided by the choice of the X
Visual used for window creation. Unfortunately, there's no direct way to
request such a Visual through the GLX or the X API, and use of the
XRender extension is required to find out whether a Visual implies a
framebuffer with alpha used by XRender (see for example [1]). Instead of
depending on the XRender wrapper library (which would require annoying
configure checks, even though XRender is virtually always supported),
use a simple heuristics to find out whether a Visual has alpha. Since
getting it wrong just means an optional feature will not work as
expected, we consider this ok.
[1] http://stackoverflow.com/questions/4052940/how-to-make-an-opengl-rendering-context-with-transparent-background/9215724#9215724
This way it's possible to retrieve correct information about video, like
actual width/height, which in general are available only after at least
one frame has been sent to the video output, such as dwidth/dheight.
mpv_identify.sh becomes a bit slower, because we let it decode enough
audio and video to fill the audio buffers and to send one frame to the
video output. Also, --playing-msg isn't shown anymore with --frames=0
(could be fixed by special-casing it, should this break any use cases).
Note that in some corner cases, like when the demuxer for some reason
returns lots of audio packets but no video packets at the start, but
video actually starts later, the --playing-msg will still be output
before video starts.
This has the same (useless) definition as frame stepping in audio-only
mode: one frame means one playloop iteration. (It's relatively useless,
because one playloop iteration has a random duration. But it makes
--frames=1 work, which is useful again.)
Add new properties "dwidth" and "dheight", which contain the video
size as known by the VO (not necessarily what the VO makes out of them,
i.e. without window scaling and panscan).
Remove `af_resample` and `af_lavcresample`. The former is a mess while the
latter uses an API that was long deprecated in libavcodec and is now removed.
`af_lavrresample` rougly has the same features and structure of
`af_lavcresample`.
libswresample fallback by wm4.
Latest nvidia drivers ignore the application setting, so this switch
makes even less sense than before. It's still possible to control this
with VO specific suboptions.
The spdif decoder was hardcoded to assume that the spdif output is
capable of accepting high (>1.5Mbps) bitrates. While this is true
for modern HDMI spdif interfaces, the original coax/toslink system
cannot deal with this and will fail to work.
This patch adds an option --dtshd which can be enabled if you use
a DTS-capable receiver behind a HDMI link.
I doubt anyone needs to adjust hue on a frequent basis, and gamma is
much more useful.
Suggestions for more radical changes of key bindings are welcome
(there's a lot of useless crap mapped).
VFCAP_OSD was used to determine at runtime whether the VO supports OSD
rendering. This was mostly unused. vo_direct3d had an option to disable
OSD (was supposed to allow to force auto-insertion of vf_ass, but we
removed that anyway). vo_opengl_old could disable OSD rendering when a
very old OpenGL version was detected, and had an option to explicitly
disable it as well.
Remove VFCAP_OSD from everything (and some associated logic). Now the
vo_driver.draw_osd callback can be set to NULL to indicate missing OSD
support (important so that vo_null etc. don't single-step on OSD
redraw), and if OSD support depends on runtime support, the VO's
draw_osd should just do nothing if OSD is not available.
Also, do not access vo->want_redraw directly. Change the want_redraw
reset logic for this purpose, too. (Probably unneeded, vo_flip_page
resets it already.)
All wayland only specific routines are placed in wayland_common.
This makes it easier to write other video outputs.
The EGL specific parts, as well as opengl context creation, are in gl_common.
This backend works for:
* opengl-old
* opengl
* opengl-hq
To use it just specify the opengl backend
--vo=opengl:backend=wayland
or disable the x11 build.
Don't forget to set EGL_PLATFORM to wayland.
Co-Author: Scott Moreau
(Sorry I lost the old commit history due to the file structure changes)
This allowed making the player switch the monitor video mode when
creating the video window. This was a questionable feature, and with
today's LCD screens certainly not useful anymore. Switching to a random
video mode (going by video width/height) doesn't sound too useful
either.
I'm not sure about the win32 implementation, but the X part had several
bugs. Even in mplayer-svn (where x11_common.c hasn't been receiving any
larger changes for a long time), this code is buggy and doesn't do the
right thing anyway. (And what the hell _did_ it do when using multiple
physical monitors?)
If you really want this, write a shell script that calls xrandr before
and after calling mpv.
vo_sdl still can do mode switching, because SDL has native support for
it, and using it is trivial. Add a new sub-option for this.
The --wid switch (for embedding the player into other applications)
didn't create a new window, and instead tried to use the window that
was passed via --wid directly. This made the code more complex, caused
strange X errors (mpv and host application fighting for exclusive X
resources), and actually could cause issues if the --wid window wasn't
created with the X Visual needed for OpenGL.
Always create a window instead. This makes it always possible to embed
the player into foreign windows. --geometry doesn't work anymore - the
controlling application should always create a new window to place the
player inside it, and can control the video window by moving and
resizing this window.
w32_common.c actually did this right, and always creates a new window.
You can just use --wid=0 if you really want this.
This only worked/works for X11, and even then it might interact badly
with most desktop environments. All the option did was setting --wid to
0, and the property did nothing.
Use the option parser instead of sscanf. Remove the parameter changing
the field dominance (it has been marked deprecated for ages). Add a new
suboption "enabled", which can be used to disable the filter by default,
until it's enabled at runtime:
mpv -vf yadif=enabled=no
For all suboptions, "flat" options were available by separating the
parent option and the sub option with ":", e.g. "--rawvideo:w=123". Drop
this syntax and use "-" as separator. This means even suboptions are
available as normal options now, e.g. "--rawvideo-w=123". The old syntax
doesn't work anymore.
Note that this is completely separate from actual suboptions. For
example, "-rawvideo w=123:h=123" still works. (Not that this syntax is
worth supporting, but it's needed anyway, for for other things like vf
and vo suboptions.)
As a consequence of this change, we also have to add new "no-" prefixed
options for flag suboptions, so that "--no-input-default-bindings"
works. ("--input-no-default-bindings" also works as a consequence of
allowing "-input no-default-bindings" - they are handled by the same
underlying option.)
For --input, always use the full syntax in the manpage. There exist
suboptions other than --input (like --tv, --rawvideo, etc.), but since
they might be handled differently in the future, don't touch these yet.
M_OPT_PREFIXED becomes the default, so remove it. As a minor unrelated
cleanup, get rid of M_OPT_MERGE too and use the OPT_SUBSTRUCT() macro in
some places.
Unrelated: remove the duplicated --tv:buffersize option, fix a typo in
changes.rst.
`--fs-screen` allows to decide what display to go fullscreen into. The
semantics of `--screen` changed and now it is only used to select the windowed
display when starting the application.
This is useful for people using mpv with an external TV. They will start
windowed on their laptop's screen and switch to fullscreen on the TV.
@wm4 worked on the x11 and w32 parts of the code. All is squashed in one
commit for history clarity.
Being able to insert newline characters ("\n") is useful for
--osd-status-msg, and possibly also for anything that prints to the
terminal. Espcially --term-osd-esc looks relatively useless without
being able to specify escapes.
Maybe parsing escapes should happen during command line / config parsing
instead (for all options).
The previous name of this filter was misleading, because it doesn’t actually
normalize volume levels. What it does is closer to performing low-quality
dynamic range compression, hence it is now called af_drc.
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
Simplify --no-config and make it a normal flag option, and doesn't take
an argument anymore. You can get the same behavior by using --no-config
and then --include to explicitly load a certain config file.
Make --no-config work for input.conf as well. Make it so that
--input:conf=file still works in this case. As a technically unrelated
change, the file argument now works as one would expect, instead of
making it relatively to "~/.mpv/". This makes for simpler code and
easier to understand option semantics. We can also print better error
messages.
There were two option syntax variations:
"old": -opt value
"new": --opt=value
"-opt=value" was invalid, and "--opt value" meant "--opt=" followed by
a separate option "value" (i.e. interpreted as filename). There isn't
really any reason to do this. The "old" syntax used to be ambiguous
(you had to call the option parser to know whether the following
argument is an option value or a new option), but that has been removed.
Further, using "=" in the option string is always unambiguous.
Since the distinction between the two option variants is confusing,
just remove the difference and allow "--opt value" and "-opt=value".
To make this easier, do some other cleanups as well (e.g. avoid having
to do a manual lookup of the option just to check for M_OPT_PRE_PARSE,
which somehow ended up with finally getting rid of the m_config.mode
member).
Error reporting is still a mess, and we opt for reporting too many
rather than too few errors to the user.
There shouldn't be many user-visible changes. The --framedrop and
--term-osd options now always require parameters.
The --mute option is intentionally made ambiguous: it works like a flag
option, but a value can be passed to it explicitly ("--mute=auto"). If
the interpretation of the option is ambiguous (like "--mute auto"), the
second string is interpreted as separate option or filename. (Normal
flag options are actually ambiguous in this way too.)
This could write .edl files in MPlayer's format. Support for playing
these files has been removed from mplayer2 quite a while ago. (mplayer2
can play its own, "new" .edl format, but does not support writing it.)
Since this is a rather obscure functionality, and it's not really clear
how it should behave (e.g. what should it do if a new file is played),
and wasn't all that great to begin with (what if you made a mistake?
the "edl_mark" command sucks for editing), get rid of it.
Suggestions how to reimplement this in a nicer way are welcome. If it's
just about retrieving timecodes, this in input.conf will do:
KEY print_text "position: ${=time-pos}"
Simply removed the assumption that the user is using `mpv-build`. Now provide 3
lines of shell that can be copy-pasted by the user for instant gratification
(and independent from $PWD).
Remove screenshot_force and associated logic. Always try to use the
screenshot video filter before trying taking screenshots with the VO,
which means that --vf=screenshot now takes the role of --vf=screenshot_force.
(To make this clear, not adding a video filter is still the recommended
way to take screenshots; we just change how VF screenshots are forced.)
Preferring VO over VF and having --vf=screenshot_force used to make
sense when not all VOs supported screenshots, and some VOs had somewhat
broken screenshots (like vo_xv taking screenshots with OSD in it). But
all these issues are fixed now, so just get rid of the cruft.
Dithering was disabled if the input bit depth was not larger than the
output bit depth of the screen framebuffer. But since scaling, RGB
conversion, and other filters change the number of significant bits
anyway, dithering could still benefit image quality even in these
cases. Always do dithering, unless dithering is completely disabled.
The original intention of this mechanism was not to change the image
needlessly when playing video that matches the native bit depth of the
screen.
The "http:" protocol has been switched to use ffmpeg's HTTP
implementation some time ago. One problem with this was that many HTTP
specific options stopped working, because they were obviously
implemented for the internal HTTP implementation only.
Add the missing things. Note that many options will work for ffmpeg
only, as Libav's HTTP implementation is missing these. They will
silently be ignored on Libav.
Some options we can't fix:
--ipv4-only-proxy, --prefer-ipv4, --prefer-ipv6
As far as I can see, not even libavformat internals distinguish
between ipv4 and ipv6.
--user, --passwd
ffmpeg probably supports specifying these in the URL directly.
-x/-y were rather useless and obscure. The only use I can see is
forcing a specific aspect ratio without having to calculate the aspect
ratio float value (although --aspect takes values of the form w:h).
This can be also done with --geometry and --no-keepaspect. There was
also a comment that -x/-y is useful for -vm, although I don't see how
this is useful as it still messes up aspect ratio.
-xy is mostly obsolete. It does two things: a) set the window width to
a pixel value, b) scale the window size by a factor. a) is already done
by --autofit (--autofit=num does exactly the same thing as --xy=num, if
num >= 8). b) is not all that useful, so we just drop that
functionality.
--autofit=WxH sets the window size to a maximum width and/or height,
without changing the window's aspect ratio.
--autofit-larger=WxH does the same, but only if the video size is
actually larger than the window size that would result when using
the --autofit=WxH option with the same arguments.
Now all numbers in the --geometry specification can take percentages.
Rewrite the parsing of --geometry, because adjusting the sscanf() mess
would require adding all the combinations of using and not using %. As
a side effect, using % and pixel values can be freely mixed.
Keep the aspect if only one of width or height is set. This is more
useful in general.
Note: there is one semantic change: --geometry=num used to mean setting
the window X position, but now it means setting the window width.
Apparently this was a mplayer-specific feature (not part of standard X
geometry specifications), and it doesn't look like an overly useful
feature, so we are fine with breaking it.
In general, the new parsing should still adhere to standard X geometry
specification (as used by XParseGeometry()).
The video filter chain traditionally used FourCCs for pixel formats.
This was recently changed, but some parts of the manpage were not
updated properly. Now there are two rypes of options: some which take
a FourCC (as used with raw video formats), and some which take a
symbolic format identifier (as used in the video filter chain).
I realize that it's harder to specify FourCC for RGB formats now (TV
stuff may need RGB). They use non-printable characters as part of the
FourCC, and have to be specified as hexadecimal numbers (instead of
a symbolic identifier). Because I can't be bothered to find out what
these numbers are for the respective formats, just remove the old
pseudo-FourCCs from the documentation.
This printed per-frame statistics into a file, like bitrate or frame
type. Not very useful and accesses obscure AVCodecContext fields
(danger of deprecation/breakage), so get rid of it.
This was a "broken misfeature" according to Libav developers. It wasn't
implemented for modern codecs (like h264), and has been removed from
Libav a while ago (the AVCodecContext field has been marked as
deprecated and its value is ignored). FFmpeg still supports it, but
isn't much useful due to aforementioned reasons.
Remove the code to enable it.
This was an awkward hack that attempted to avoid the use of 16 bit
textures, while still allowing rendering 10-16 bit YUV formats. The
idea was that even if the hardware doesn't support 16 bit textures,
an A8L8 textures could be used to convert 10 bit (etc.) to 8 bit in
the shader, instead of doing this on the CPU.
This was an experiment, disabled by default, and was (probably) rarely
used. I've never heard of this being used successfully. Remove it.
mplayer's video chain traditionally used FourCCs for pixel formats. For
example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the
string 'YV12' interpreted as unsigned int. Additionally, it used to
encode information into the numeric values of some formats. The RGB
formats had their bit depth and endian encoded into the least
significant byte. Extended planar formats (420P10 etc.) had chroma
shift, endian, and component bit depth encoded. (This has been removed
in recent commits.)
Replace the FourCC mess with a simple enum. Remove all the redundant
formats like YV12/I420/IYUV. Replace some image format names by
something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P.
Add img_fourcc.h, which contains the old IDs for code that actually uses
FourCCs. Change the way demuxers, that output raw video, identify the
video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to
request the rawvideo decoder, and sh_video->imgfmt specifies the pixel
format. Like the previous hack, this is supposed to avoid the need for
a complete codecs.cfg entry per format, or other lookup tables. (Note
that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT
raw video, but this is still considered better than adding a raw video
decoder - even if trivial, it would be full of annoying lookup tables.)
The TV code has not been tested.
Some corrective changes regarding endian and other image format flags
creep in.
Deprecate the hardware specific video codec entries (like ffh264vdpau).
Replace them with the --hwdec switch, which requests that a specific
hardware decoding API should be used. The codecs.conf entries will be
removed at a later time, but for now they are useful for testing and
compatibility.
Instead of --vc=ffh264vdpau, --hwdec=vdpau should be used.
Add a fallback if hardware decoding fails. Most hardware decoders
(including vdpau) support only a subset of h264, and having such a
fallback is supposed to enable a better user experience.
Slices allowed filtering or drawing video in horizontal bands or
blocks. This allowed working on the video in smaller units. In theory,
this could bring a performance win by lowering cache pressure, as you
didn't have to keep the whole video frame in cache while filtering,
only the slice.
In practice, the slice code path was barely used for the following
reasons:
- Multithreaded decoding with ffmpeg didn't use slices. The ffmpeg
slice callback was disabled, because it can be called from another
thread, and the mplayer video chain is not thread-safe.
- There was nothing that would turn "full" images into appropriate
slices, so slices were rarely used.
- Most filters didn't actually support slices.
On the other hand, supporting slices lead to code duplication and more
complex code in general. I made some experiments and didn't find any
actual measurable performance improvements when using slices. Even
ffmpeg removed slices based filtering from libavfilter in favor of
simpler code.
The most broken thing about the slices code path is that slices can't
be queued, like it is done for images in vo.c.
This is simpler and more useful. We could add a new switch for the old
functionality, but that would probably be more confusing than helpful.
When passing only a single file to the command line, this commit
shouldn't change behavior.
(Classic mplayer provided both features by duplicating the loop
functionality in the "playtree".)
Setting some subtitle options may lead to incorrect rendering of complex
ASS subtitle scripts, such as displaced signs or visual artifacts. The
user should be made aware that this can happen.
In theory, libass could make using some of these options relatively
safe, but it doesn't.
Note that there are potentially much more options that could in theory
break subtitle rendering, but add a warning only to the most fragile
ones.
Before this commit, the --osd-* options (like --osd-font-size etc.)
configured both the OSD and subtitle font. Make them separate, and add
--sub-text-* options (like --sub-text-size etc.). Now --osd-* affects
the OSD font only, and --sub-text-* unstyled text subtitles only.
They were more or less grouped by usefulness, but since everything
else in the manpage is sorted alphabetically, it's better to be
consistent and sort these options as well.
Change from gamma 2.2 to the slightly more precise 1/0.45 as per BT.709.
https://www.itu.int/rec/R-REC-BT.709-5-200204-I/en mentions a value of
γ=0.45 for the conceptual non-linear precorrection of video signals.
This is approximately the inverse of 2.22, and not 2.20 as the code had
been using until now.
This mainly serves as a fallback for platforms where nothing better is
available; also as a debugging help. Both the audio and video driver are
not first class - the audio driver lacks delay detection, and the video
driver only supports a single YUV color space.
Configure options: --disable-sdl2 to disable SDL 2.0+ detection,
--disable-sdl to disable SDL 1.2+ detection. Both options need to be
specified to turn off SDL support entirely.
Commit c02f25 switched the "http://" protocol to use ffmpeg's HTTP
implementation (stream_lavf.c), instead of the mplayer internal one
(http.c). Unfortunately, it turns out that there are some network
related options that are not respected by stream_lavf.c, and
consequently do not work anymore for "http://" URLs. This might be
fixed later. Mark them as deprecated for now, as it might take
arbitrarily long until this is taken care of.
ffmpeg pretends that image attachments (such as contained in ID3v2
metadata) are video streams. It injects the attached pictures as packets
into the packet stream received with av_read_frame().
Add the --audio-display option to allow configuring whether attached
pictures should be displayed. The default behavior doesn't change
(images are displayed).
Identify video streams, that are actually image attachments, with "[P]"
in the terminal output.
Modify the default stream selection such that real video streams are
preferred over attached pictures. (This is just for robustness; I do not
know of any samples where images are added before actual video streams
and could lead to bad default stream selection with the old code.)
libavformat wants to read a full ~400KB of data to determine whether
it's really AAC. This causes slow startup with AAC web radio streams [1]
(possible due to a broken initial packet). There are similar issues
with other file formats.
Make the probe "score" (libavformat's mechanism for testing file
formats) configurable with the -lavfdtops:probescore option. This allows
lowering the amount of data read on probing. If the probe score is below
the probescore option value, demux_lavf will try to get a higher score
by feeding more data to libavformat, until the required score or the
max. probe size is reached.
Remove the lavf_preferred demuxer entry. This had a purpose in
mplayer-svn, but now there doesn't seem to be any good reason for it
to exist. Make sure that our native "good" demuxers are above
demux_lavf in demuxer_list[] instead (so that they are preferred).
[1] http://lr2mp0.latvijasradio.lv:8000
ffmpeg recently added a demuxer that can read vobsubs (pairs of .sub and
.idx files). Get rid of the internal vobsub reader, and use the ffmpeg
demuxer instead.
Sneak in an unrelated manpage change (autosub default).
Remove the options --utf8 and --unicode which had no effect any more
(what they once did should be doable with --subcp). The only use of
corresponding variables left in code was subreader.c code using
sub_utf8 as a flag indicating whether iconv conversion was active.
Change the code to test the existence of iconv context instead.
Conflicts:
DOCS/man/en/options.rst
core/cfg-mplayer.h
sub/sub.c
sub/sub.h
sub/subreader.c
Merged from mplayer2 commit ea7311.
Note: --unicode was already removed
When the cache fill status goes below a certain threshold, automatically
pause the player. When the cache is filled again, unpause again.
This is intended to help with streaming from http. It's better to pause
a while, rather than exposing extremely crappy behavior when packet
reads during decoding block the entire player.
In theory, we should try to increase the cache if underruns happen too
often. Unfortunately, changing the cache implementation would be very
hard, because it's insane code (forks, uses shared memory and "volatile"
etc.). So for now, this just reduces the frequency of the stuttering if
the network is absolutely too slow to play the stream in realtime.
libavdevice supports various "special" video and audio inputs, such
as screen-capture or libavfilter filter graphs.
libavdevice inputs are implemented as demuxers. They don't use the
custom stream callbacks (in AVFormatContext.pb). Instead, input
parameters are passed as filename. This means the mpv stream layer has
to be disabled. Do this by adding the pseudo stream handler avdevice://,
whose only purpose is passing the filename to demux_lavf, without
actually doing anything.
Change the logic how the filename is passed to libavformat. Remove
handling of the filename from demux_open_lavf() and move it to
lavf_check_file(). (This also fixes a possible bug when skipping the
"lavf://" prefix.)
libavdevice now can be invoked by specifying demuxer and args as in:
mpv avdevice://demuxer:args
The args are passed as filename to libavformat. When using libavdevice
demuxers, their actual meaning is highly implementation specific. They
don't refer to actual filenames.
Note:
libavdevice is disabled by default. There is one problem: libavdevice
pulls in libavfilter, which in turn causes symbol clashes with mpv
internals. The problem is that libavfilter includes a mplayer filter
bridge, which is used to interface with a set of nearly unmodified
mplayer filters copied into libavfilter. This filter bridge uses the
same symbol names as mplayer/mpv's filter chain, which results in symbol
clashes at link-time.
This can be prevented by building ffmpeg with --disable-filter=mp, but
unfortunately this is not the default.
This means linking to libavdevice (which in turn forces linking with
libavfilter by default) must be disabled. We try doing this by compiling
a test file that defines one of the clashing symbols (vf_mpi_clear).
To enable libavdevice input, ffmpeg should be built with the options:
--disable-filter=mp
and mpv with:
--enable-libavdevice
Originally, I tried to auto-detect it. But the resulting complications
in configure did't seem worth the trouble.
The option is -no-video. Remove the deprecated "fast" suboption, which
did nothing and instructed the user to use "-novideo" instead.
Fix a reference to -novideo in encoding.rst.
Add a "generic" entry about -no-* to the list of renamed options. The
change is already explicitly mentioned in the text above the table, but
even if it's redundant, it makes it harder to overlook.
MPlayer/mplayer2 still show DVD subtitles in gray. Depending on who you
ask, this can be considered a bug or a feature. Include rendering in
gray as explicit feature, so the user can decide what is better.
This affects all indexed sub bitmaps entering the OSD rendering path.
Currently, this means all image subs are affected by this option, but
nothing else.
Apparently the -spugauss option was popular. The code originally
implementing this is gone (scaler stuff in spudec.c). Reimplement it
using libswscale to scale and blur image subtitles if the --sub-gauss
option is set.
The code does some rather lazy padding to allow the blur to spread
pixels past the original image bounding box. (This problem exists with
normal bilinear scaling too, but is barely noticable.)
Technically, this doesn't just blur subtitles, but anything RGBA (or
indexed) that enters the OSD rendering path. But only image subtitles
produce these OSD formats currently, so no explicit check is done to
prevent blurring in other cases.
Make more aspects of the OSD font customizable. This also affects the
font used for unstyled subtitles (such as SRT), or when using the
--no-ass option. This adds back some customizability that was lost with
commit 74e7a1 (osd: use libass for OSD rendering).
Removed options:
--ass-border-color
--ass-color
--font
--subfont
--subfont-text-scale
Added options:
--osd-color
--osd-border
--osd-back-color
--osd-shadow-color
--osd-font
--osd-font-size
--osd-border-size
--osd-margin-x
--osd-margin-y
--osd-shadow-offset
--osd-spacing
--sub-scale
The font size is now specified in pixels as it would be rendered on a
window with a height of 720 pixels. OSD and subtitles are always scaled
with the window height, so specifying or expecting an absolute font
size doesn't make sense.
Such scaled pixel units are used to specify font border etc. as well.
(Note: the font size is directly passed to libass. How the fonts are
actually rasterized is outside of our control, but in theory ASS font
sizes map to "script" pixels and then are scaled to screen size.)
The default settings should be about the same, with slight difference
due to rounding to the new scales.
The OSD and subtitle fonts are not separately configurable. It has
limited use and would double the number of newly added options, which
would be more confusing than helpful. It could be easily added later,
should the need arise.
Other small details that change:
- ASS_Style.Encoding is not set to -1 for subs anymore
(assuming subs use VSFilter direction in -no-ass mode too)
- use a different WrapStyle for OSD
- ASS forced styles are not applied to OSD
The --start and --end switch now accept a chapter number. The chapter
number is prefixed with '#', e.g. "--start=#2" jumps to chapter 2.
The chapter support might be able to replace --chapter completely, but
for now I am not sure how well this works out with e.g. DVDs and BDs,
and a separate --chapter option is useful interface-wise.
(This was supposed to be added in 51503a, but apparently the fixup
commit adding it was lost in a rebase. This might also be the reason
for the mess-up fixed in 394285.)
Enable autoprobing for demux_mf, so that image files can be directly
displayed with e.g. "mpv file.jpg --pause". (The --pause switch is
needed to prevent the window from closing immediately.)
Since demux_mf doesn't have any real file format probing and goes by
file extension only, move the demuxer down the demuxer list to ensure
it's checked last. (ffmpeg's demux_mf equivalent, "image2", probes by
file extensions too, and there doesn't seem to be anything that can
probe typical image file formats from binary data.)
Remove the --mf "w" and "h" suboptions. Don't pass the width/height to
the video stream header. Both of these are useless, because the decoder
reads the real image size at a later point from the file headers.
Remove setting the BITMAPINFOHEADER as well, as vd_lavc doesn't need
this.
Enable --correct-pts by default. This fixes displaying a single image
with vo_vdpau (as mentioned by uau).
Keep around a pointer to the sh_video stream header instead of
accessing demuxer->video->sh_video. Fixes a crash when deselecting the
video track.
Note that the format probing is incorrect when opening images from HTTP
locations. File extensions don't have to match the actual file format.
A correct implementation would require to check the MIME type, or to
probe the binary data correctly.
The --keep-open option causes mpv not to close the current file.
Instead, it will pause, and allow the user to seek around. When
seeking beyond the end of the file, mpv does a precise seek back to
the previous last known position that produced video output.
In some corner cases, mpv might not be able to produce video output at
all, despite having created a VO. (Possibly when only 1 frame could be
decoded, but the video filter chain queues frames. Then a VO would be
created, without sending an actual video frame to the VO.) In these
cases, the VO window will not redraw, not even OSD.
Based on a patch by coax [1].
[1] http://devel.mplayer2.org/ticket/210#comment:4
sub_remove remove an external subtitle track, for whatever this may be
needed.
sub_reload removes and re-adds an external subtitle track.
Also rename sub_load to sub_add, because that seems to be more in line
with sub_remove.
"--autosub-match" is close to "--autosub", and reflects what this
option does slightly better. Replace the magic number option values
with choices:
--sub-fuzziness=0 becomes --autosub-match=exact
--sub-fuzziness=1 becomes --autosub-match=fuzzy
--sub-fuzziness=2 becomes --autosub-match=all
Rename the -ss option to -start, and -endpos to -length. Add a -end
option. The -end option always specifies an absolute end time, as
opposed to -endpos/-length.
All these options (--start, --end, --length) now accept relative times.
Percent positions (e.g. "--start=30%") are interpreted as fractions of
the file duration. Negative times (e.g. "--start=-1:00) are interpreted
relative to the end of the file. Chapters (e.g. "--start=#3") yield the
chapter's time position.
The chapter support might be able to replace --chapter completely, but
for now I am not sure how well this works out with e.g. DVDs and BDs,
and a separate --chapter option is useful interface-wise.
Remove the code that attempted to read cookie files from well-known
browser locations. This code was written for ancient browsers, and only
knew about Mozilla and Netscape. While it's possible that these browsers
are still alive and still use the same config locations and cookie file
formats, the only Mozilla-based browser that still matters is Firefox.
Firefox uses a sqlite database for cookies, located in a slightly
different config path.
Just remove this code.
This wasn't actually used since the old gray-alpha OSD rendering has
been removed. Removing the documentation for the vo_opengl_old osdcolor
suboption was forgotten as well.
The -zoom option enabled scaling with vo_x11. Remove the -zoom option,
and make its behavior default. Since vo_x11 has to use libswscale for
colorspace conversion anyway, which doesn't do actual extra scaling when
vo_x11 is run in windowed mode, there should be no speed difference with
this change.
The code removed from vf_scale attempted to scale the video to d_width/
d_height, which matters for anamorphic video and the --xy option only.
vo_x11 can handle these natively. The only case for which the removed
vf_scale code could matter is encoding with vo_lavc, but since that
didn't set VOFLAG_SWSCALE, nothing actually changes.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
To simplify implementation, the same filter kernel was used for both
directions, even when the scaling factors were different. It turns
out that people actually did this, and that the resulting rendering
errors were rather visible. Disable this feature by default, as
fixing it would require structural changes, and it's a useless anyway.
The -ni option does something with the AVI demuxer only.
Also fix misleading error messages when the packet queue overflows (it
suggests using -ni, which in the typical case of playing NI AVI files
will not work, as demux_lavf is used by default).
This controlled the generation of the palette for DVD subs if no palette
was found. The option name and description is confusing, and it was
probably barely useful. Remove the option, and hardcode the behavior to
the option's default value.
The code for this option attempted to emulate the old as-documented
behavior. It wasn't very good at it, and now that the old OSD code has
been removed, it's entirely pointless.
This removes the factor 1.7 with which --subfont-text-scale was
multiplied.
Most of these cased working when the OSD was switched to libass, or
didn't do anything even before that.
Also don't recursively include subreader.h in sub.h.
Since most VOs support rendering subs directly, this doesn't change
much. Changes include: vo_null is faster, vo_image doesn't add subtitles
by default (while vo_lavc does), vo_caca doesn't render subs (but you
couldn't read them anyway).
This reflects the fact that this filter now renders all types of
subtitles, not just ASS subtitles.
Always compile this filter, not just on CONFIG_ASS.
Note that --no-ass still disables auto-inserting this filter. It's the
only way to disable auto-insertion, so keep it even though it's not
really ASS specific anymore. --no-ass also disables using libass for
rendering text subs directly.
Fix the "grammar" of such commands to be hopefully less confusing. Also,
add the "-" for such arguments, which skips optional arguments without
changing their default value.
Also change some mentions of "mplayer" to "mpv".
"screenshot" now maps to "screenshot subtitles" by default, instead of
"screenshot video". Swap the argument order: the more useful argument
should come first. Remove the compatibility aliases for numeric choices
(e.g. "screenshot 1 0" won't work anymore).
This adds a new screenshot mode "subtitles", which basically takes the
video frame as decoded, and renders subtitles into it.
This may fail for some pixel formats, because libswscale sucks. If this
becomes ever a real problem, the code could be changed to convert the
image to RGBA first (or whatever the image writer wants), and then
render the subtitles into it. This would avoid the additional image
copy needed with vo_xv too. But for now, it seems better to go with the
current method in the common case: vo_opengl creates an image copy
anyway, and drawing bitmaps to yv12 is better, as no color space
conversion is involved in draw_bmp.c's up/downsampling conversion.
Remove VFCTRL_DRAW_OSD, VFCAP_EOSD_FILTER, VFCAP_EOSD_RGBA, VFCAP_EOSD,
VOCTRL_DRAW_EOSD, VOCTRL_GET_EOSD_RES, VOCTRL_QUERY_EOSD_FORMAT.
Remove draw_osd_with_eosd(), which rendered the OSD by calling
VOCTRL_DRAW_EOSD. Change VOs to call osd_draw() directly, which takes
a callback as argument. (This basically works like the old OSD API,
except multiple OSD bitmap formats are supported and caching is
possible.)
Remove all mentions of "eosd". It's simply "osd" now.
Make OSD size per-OSD-object, as they can be different when using
vf_sub. Include display_par/video_par in resolution change detection.
Fix the issue with margin borders in vo_corevideo.
To ease changing all the VOs to the new OSD rendering, fallbacks,
conversions, support code etc. was left all over the code. Now that
all VOs have been changed, all that code is inactive. Remove it.
Strip down spudec.c. We don't need the old grayscale and scaling stuff
anymore. (Not removing spudec itself yet - I'm not confident that the
libavcodec DVD sub decoder is sufficient, and it would also require
some hacks to get DVD palette and resolution information from libdvdread
to libavcodec.)
The option --spuaa, --spualign, --spugauss were used with the old sub
scaling code, and don't do anything anymore.
This was an extremely obscure setting, as it was used only with vo_gl
if its scaled-osd suboption was used. If you really want this, you can
set the desired ass-hinting value directly, and there will be literally
no loss in functionality.
Note that this didn't actually test whether the EOSD was scaled.
Basically, it only checked whether vo_gl had the scaled-osd suboption
set.
Useless. It complicated the code and caused flicker, and was useless
otherwise. The manpage describes this option as "should not normally
be used".
One possibly useful effect from the point of view of the user was that
vsync was disabled. You can do this with the --vsync option, or by
changing X/driver settings directly.
In input test mode, key bindings won't be executed, but are shown on the
OSD. The OSD includes various information, such as the name of the key,
the command itself, whether it's builtin, and the config file location
it was defined.
The input test mode can be enabled with "--input=test". No effort is
spent trying to react to key bindings that normally exit the player;
they are treated just like any other binding.
Clean up handling of libquvi (which resolves URLs of streaming sites
into URLs to the actual media playable by mpv). Move the code out of
open.c to quvi.c, and invoke it explicitly from mplayer.c, instead of
trying to resolve every filename passed to open_stream().
This allows easily passing metadata from the quvi context to the
frontend. Expose QUVIPROP_PAGETITLE as "media-title" property, and use
that instead of "filename" for the mplayer window title. (For YouTube,
this is the video title.) It's cleaner too.
Handle a potential reliability issue: check quvi_getprop return values.
Since open.c contains barely anything but the open_stream() stub, move
that to stream.c and delete open.c.
This changes the name of this project to mpv. Most user-visible mentions
of "MPlayer" and "mplayer" are changed to "mpv". The binary name and the
default config file location are changed as well.
The new default config file location is: ~/.mpv/
Remove etc/mplayer.desktop. Apparently this was for the MPlayer GUI,
which has been removed from mplayer2 ages ago.
We don't have a logo, and the MS Windows resource files sort-of require
one, so leave etc/mplayer.ico/.xpm as-is.
Remove the debian and rpm packaging scripts. These contained outdated
dependencies and likely were more harmful than useful. (Patches which
add working and well-tested packaging are welcome.)
Allow the values "up" and "down" as step argument for the cycle input
command. Previously, this argument was a float, which specified an
arbitrary step value and direction (similar to the add command).
Instead of "1" and "-1", "up" and "down" is to be used.
Float values are still accepted. That capability might be removed in the
future, as there's probably hardly any actual use for arbitrary step
values.
There are a number of options which modify ASS subtitle rendering. Most
of these do things that can interfere with the styling done by subtitle
scripts, resulting in incorrect rendering. Add the --ass-style-override
option to make it easy to disable all overrides. This helps trouble-
shooting, and makes it more practical to use the override features. (You
can simply toggle the ass-style-override property at runtime, should
one of the style override options break subtitle rendering at a certain
point.)
This mainly affects whether most --ass-* options are applied, as well
as --sub-pos. Some things, like explicit style overrides loaded with
--ass-force-style, can't be changed at runtime using the
ass-style-override property.
Replaces the status line with a custom string.
This is probably useful for hacking old slave mode applications into
working again. Even if not, this might be generally useful.
Make more properties use the property-to-option bridge to reduce code
size and to enforce consistency. Some options are renamed to the same
as the properties (the property names are better in all cases).
Do some other minor cleanups. One bigger issue was memory management of
strings: M_PROPERTY_TO_STRING assumed the strings were statically
allocated, and no dynamic allocations could be returned. Fix this in
case the need for such properties arises in the future. Get rid of
m_property_string_ro(), because it's not always clear that the "action"
parameter is M_PROPERTY_SET and the string argument will be used.
This removes the alternative values like "off", "0", "false" etc., and
also the non-English versions of these.
This is done for general consistency. It's better to have a single way
of doing things when multiple ways don't add singificant value.
Also update some choices for consistency.
Rename both the option and property to "osd-level", which fits a bit
better with the general naming scheme. Make it a choice instead of an
integer range. I failed to come up with good names for the various
levels, so leave them as-is.
Remove the useless property handler for the "loop" property too.
Replace --hardframedrop with --framedrop=hard. Rename the framedrop
property from "framedropping" to "framedrop" for the sake of making
command line options have the same name as their corresponding
property. Change the property to accept choice values instead of
numeric values.
Remove unused/forgotten auto_quality variable.
GL_RGB16 doesn't seem to work universally (e.g. Intel). Use GL_RGB by
default, and use GL_RGB16 for "opengl-hq" only.
This may require users of Intel GPUs to manually experiment with the
fbo-format suboption when using "opengl-hq", as GL_RGB16 doesn't seem to
work there in some cases (black screen).
It's not really known whether PBO use causes problems of any kind (most
likely not). They should slightly increase performance. Use them by
default with "opengl-hq".
Even though PBOs don't have anything to do with rendering quality,
"opengl-hq" provides a test bed for features that should be enabled by
default, but aren't out of fear for regressions.
Change the default settings for vo_opengl to highest performance and
compatibility, but lowest quality. Use bilinear as default scaler.
Add "opengl-hq" as alias for high quality settings. This alias uses
exactly the same settings as vo_opengl did before this commit.
This renames vo_gl3 to vo_opengl, and makes it the default. The old
vo_gl is still available under "opengl-old".
We keep "gl3" as alias to "opengl" for short-term compatibility.
For OSX/Cocoa, the autoprobe order changes (prefer the "opengl" over
"opengl-old").
Remove "gl_nosw". This was a compatibility alias for "opengl-old", and
there's no point in keeping it.
Now vo_gl3 should work with standard OpenGL 2.1, as long as the
GL_ARB_texture_rg extension is available. Optional features, which
require features that are always in OpenGL 3.0, but are available
as extensions only in OpenGL 2.1, are automatically disabled.
The force-gl2 suboption, which was an unreliable hack to run vo_gl3
in an OpenGL 2.1 context, is removed.
Significant changes are done to the extension loader to make it easier
to identify optional OpenGL features.
Context creation is a bit changed to simplify the code and to handle
the fallback better if OpenGL 3 context creation fails, and creating
an OpenGL legacy context is attempted.
Based on the initial work by Rudolf Polzer <divverent@xonotic.org>,
which included making the shader GLSL 1.20 compatible, and more.
Most of these have very limited actual use, or are even entirely
useless. They only serve to bloat the codebase and to make life harder.
Drowning users in tons of barely useful filters isn't exactly helpful
either. Some of these filters were redundant or marked as obsolete.
The dlopen and lua (to be added soon) video filters provide ways to add
custom filters.
Detailed listing for each filter with reasons (with contributions from
divVerent and lachs0r):
1bpp:
Replaced by "scale".
2xsai:
Pixel art scaling algorithm, useless with lossy video.
blackframe:
Not very useful. Apparently one use is combining it with scripts,
that pass the
bmovl:
Weirdly complex and insane (using FIFO commands), questionable use.
cropdetect:
Only sort-of useful when used with scripts, and then it will be
very fragile.
It's probably better to use the dlopen rectangle filter, or to
implement the common use-case in a better way.
decimate:
Not needed/useful with modern video codecs, is an
encoding-only filter.
denoise3d:
"hqdn3d" is better.
detc:
Some of the worse deteleciners.
dint:
Useless, actually crashes. (On an assert in vf.c that is disabled
by default in mplayer-svn.)
dvbscale:
Not even practical, and the same effect can be achieved through
other means.
eq:
Worse/older version of eq2.
field:
Limited use, available as dlopen filter.
fil:
Quoting the manpage:
This filter is very similar to the il filter but much faster,
the main disadvantage is that it does not always work.
Especially if combined with other filters it may produce
randomly messed up images, so be happy if it works but do not
complain if it does not for your combination of filters.
filmdint:
Kind of redundant with pullup, and slightly worse.
fixpts:
Never useful. (Most if not all filters have been fixed for PTS.)
framestep:
Questionable use. For things like creating thumbnails, ffmpeg or
--sstep should be used.
geq:
Limited use, will be redundant with the "lua" filter.
halfpack:
Useless, probably redundant with "scale".
harddup:
Useless.
hue:
Most VOs support this.
il:
Useless.
ivtc:
Another of the worse deteleciners.
kerndeint:
A bad deinterlacer.
lavc:
For DVB output devices. We removed that support.
lavcdeint:
A bad deinterlacer, was already deprecated.
Still available as --vf=pp=fd.
mcdeint:
A broken deinterlacer that uses lavc internals.
ow:
Very slow, barely any quality benefit over "hqdn3d".
palette:
Done by "scale".
perspective:
Files with incorrect perspective are extremely rare. About the
only real-world use for this is keystone correction, which is
usually done in hardware by the projector or by graphics
drivers/compositors.
pp7:
Another useless postprocessing filter with bad and complicated code.
Use libpostprocess with "pp" instead.
qp:
Useless.
remove-logo:
Redundant with delogo, which is better and more practical.
rgbtest:
Useless.
sab, smartblur, boxblur:
Blur filters, redundant to "unsharp".
softskip:
Does nothing.
spp, fspp, uspp:
Useless postprocessing filters. "spp" needs ffmpeg internals.
"fspp" is the optimized version of the "spp" filter (???), while
"uspp" is the slow version (????).
Use libpostprocess with "pp" instead.
telecine:
Evil and useless. Available as dlopen filter for testing
purposes.
test:
Useless.
tfields:
Useless, probably.
tile:
Questionable use. Available as dlopen filter.
tinterlace:
Evil and useless.
yuvcsp:
Probably useless.
yvu9:
Redundant with "scale".
Also remove the following left-over files: vd_null.c, vqf.h
