stream_vstream.c in particular was actually dependent on the network
code, and didn't compile anymore.
Cleanup the protocol list in mpv.rst, and add some missing ones
supported by libavformat to stream_lavf.c.
This commit removes the "old" networking code in favor of libavformat's
code.
The code was still used for mp_http, udp, ftp, cddb. http has been
mapped to libavformat's http support since approximately 6 months ago.
udp and ftp have support in ffmpeg (though ftp was added only last
month). cddb support is removed with this commit - it's probably not
important and rarely used if at all, so we don't care about it.
--disable-libquvi creates the impression that it disables libquvi 0.9
as well. It doesn't, because it refers to libquvi 0.4, and 0.4 and 0.9
are practically completely different libraries. Make this more explicit
by renaming the switch to include the "4" version number.
This adds support for libquvi 0.9.x, and these features:
- start time (part of youtube URL)
- youtube subtitles
- alternative source switching ('l' and 'L' keys)
- youtube playlists
Note that libquvi 0.9 is still in development. Although this seems to
be API stable now, it looks like there will be a 1.0 release, which is
supposed to be the next stable release and the actual successor of
libquvi 0.4.x.
libarclite provides method stubs for the Subscripting headers added in
0407869ae3. This allows to correclty build mpv on OSX 10.7 (I had tested that
commit with OSX 10.8 running 10.7 SDK).
It seems on 10.8 this option does't make any difference in the linked libraries
(checked with otool -L) so I just add it unconditionally.
Warning: This doesn't mean mpv moved to ARC. To do that one would have to add
`-fobjc-arc` to the cflags.
Basically rewrite all the code supporting the cache (i.e. anything other
than the ringbuffer logic). The underlying design is untouched.
Note that the old cache2.c (on which this code is based) already had a
threading implementation. This was mostly unused on Linux, and had some
problems, such as using shared volatile variables for communication and
uninterruptible timeouts, instead of using locks for synchronization.
This commit does use proper locking, while still retaining the way the
old cache worked. It's basically a big refactor.
Simplify the code too. Since we don't need to copy stream ctrl args
anymore (we're always guaranteed a shared address space now), lots of
annoying code just goes away. Likewise, we don't need to care about
sector sizes. The cache uses the high-level stream API to read from
other streams, and sector sizes are handled transparently.
Before this commit, the cache was franken-hacked on top of the stream
API. You had to use special functions (like cache_stream_fill_buffer()
instead of stream_fill_buffer()), which would access the stream in a
cached manner.
The whole idea about the previous design was that the cache runs in a
thread or in a forked process, while the cache awa functions made sure
the stream instance looked consistent to the user. If you used the
normal functions instead of the special ones while the cache was
running, you were out of luck.
Make it a bit more reasonable by turning the cache into a stream on its
own. This makes it behave exactly like a normal stream. The stream
callbacks call into the original (uncached) stream to do work. No
special cache functions or redirections are needed. The only different
thing about cache streams is that they are created by special functions,
instead of being part of the auto_open_streams[] array.
To make things simpler, remove the threading implementation, which was
messed into the code. The threading code could perhaps be kept, but I
don't really want to have to worry about this special case. A proper
threaded implementation will be added later.
Remove the cache enabling code from stream_radio.c. Since enabling the
cache involves replacing the old stream with a new one, the code as-is
can't be kept. It would be easily possible to enable the cache by
requesting a cache size (which is also much simpler). But nobody uses
stream_radio.c and I can't even test this thing, and the cache is
probably not really important for it either.
Otherwise this could happily open decoders for image subtitles or even
audio/video decoders. AV_CODEC_PROP_TEXT_SUB is a preprocessor symbol,
but it's still better to detect this properly instead of using #ifdef,
because these flags might as well be changed into enums sooner or later.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
Commit 02bbd87b disabled SDL linking by default. This commit followed
the ancient mplayer convention of disabling detection of compiler flags
with --enable-* switches. Unfortunately, this makes compiling with SDL
enabled a pain.
Make --enable-sdl/sdl2 use autodetection, even if it's inconsistent with
most other --enable-* switches. The same is already done for
--enable-openal, though.
Based on a pull request by qyot27.
mpv still builds with ffmpeg 1.0.x, however libswresample keeps cuasing
trouble. In older releases, libswresample simply crashed when
downmixing. In somewhat newer versions, it produces distorted output and
downmixing isn't even close to correct.
With ffmpeg release 1.1 (ffmpeg git tag n1.1), everything seems to work
fine. The release uses 0.17.102 as libswresample version, so bump the
required minimum version to that.
The libavresample version of the current Libav stable release lacks the
avresample_set_channel_mapping() function. (FFmpeg's libswresample seems
to be fine, because they added swr_set_channel_mapping() first.)
Add a cheap/slow workaround to do channel reordering on our own. We
don't use the recently removed MPlayer code (see commit 586b75a),
because that is not generic enough.
The functionality should be the same as with full-featured
libavresample, and any differences are bugs. It's probably slower,
though.
Schedule mpv's playloop as a high frequency timer inside the main Cocoa event
loop. This has the benefit to allow accessing menus as well as resizing the
window without the playback being blocked and allows to remove countless hacks
from the code that involved manually pumping the event loop as well simulating
manually some of the Cocoa default behaviours.
A huge improvement consists in removing NSApplicationLoad. This is a C function
defined in the Cocoa header and implements a minimal OSX application under ther
hood so that you can use the Cocoa GUI toolkit from C/C++ without having to
respect the Cocoa standards in terms of application initialization. This was
bad because the behaviour implemented by NSApplicationLoad was hard to customize
and had several gotchas especially in the menu department.
mpv was changed to be just a nib-less application. All the Cocoa part is still
generated in code but the event handling is now not dissimilar to what is
present in a stock Mac application.
As a part of reviewing the initialization process, I also removed all of
`osdep/macosx_finder_args`. The useful parts of the code were moved to
`osdep/macosx_appication` which has the broaded responsibility of managing the
full lifecycle of the Cocoa application. By consequence the
`--enable-macosx-finder` configure switch was killed as well, as this feature
is always enabled.
Another change the users will notice is that when using a bundle the `--quiet`
option will be inserted much earlier in the initializaion process. This results
in mpv not spamming mpv.log anymore with all the initialization outputs.
This is done because statically linked SDL libraries are incompatible
with direct X11 function use (e.g. vo_x11, vo_gl etc.) because of
clashing symbol names.
http://bugzilla.libsdl.org/show_bug.cgi?id=1828
Bump xkbcommon version and use the new xkb_keymap_from_buffer. This is more
secure, because the from_string expects a 0 terminated string, but this cannot
be guaranteed with mmap.
Block X11's native key repeat, and use mpv's key repeat handling in
input.c instead.
No configure check for XKB. Even though it's an extension, it has been
part of most (all?) xlibs since 1996. If XKB appears to be missing,
just refuse enabling x11.
This is a potentially controversial change. mpv will use its own key
repeat rate, instead of X11's. This should be better, because seeking
will have a standardized "speed" (seek events per seconds when keeping
a seek key held down). It will also allow disabling key repears for
certain commands, though this is not done anywhere yet.
The new behavior can be disabled with the --native-keyrepeat option.
Used to be disabled by default, because libavdevice depends on
libavfilter, and earlier versions of libavfilter exports symbols that
clash with mpv's due to its MPlayer filter wrapper. Our configure script
explicitly detects these symbols now, and we can use that to safely
auto-detect libavdevice too. If we detect that libavfilter can't be
safely used, libavdevice is disabled as well.
Requires recent FFmpeg/Libav git versions. Earlier versions will not
be supported, as the API is different. (A libavfilter version that
uses AVFrame instead of AVFilterBuffer is needed.)
Note that this is sort of useless, because the option parser prevents
you from making use of the full libavfilter graph syntax. This has to be
fixed later.
Most of the filter creation code (half of the config() function) has
been taken from avplay.c.
This code is not based on MPlayer's vf_lavfi. The MPlayer code doesn't
compile as it hasn't been updated through multiple libavfilter API
changes, making it completely useless as a starting point.
At least libsdl adds -mwindows to the cflags, which marks the .exe
binary as GUI application. This means the program detaches from the
console when started in cmd.exe, instead of showing the playback
status, receiving console input, and so on.
Append -mconsole to the linker command line to disable -mwindows.
ntddcdrm.h is no longer under the 'ddk' directory in MinGW-w64,
and since MPV focuses on it instead of the old MinGW32, there's no
reason to keep that dir prefix, as it stops VCD support from being
built at all for Windows.
The OSX part of the Apple Remote was unmaintained for a long time and was not
working anymore. I tried to update the cookies to what the current versions of
OS X expect without much luck. I decided to remove it since Apple is not
including the IR receiver anymore in new hardware and it's clear that wifi
based remotes are the way to go.
A third party iOS app should be used in it's place. In the future we could look
into having a dedicated iOS Remote Control app like VLC and XBMC do.
The Linux side (`appleir.c`) was relatively tidy but it looks like LIRC can be
configured to work with any version of Apple Remote [1] and is more maintained.
[1] LIRC Apple Remote configs: http://lirc.sourceforge.net/remotes/apple/
This only matters for those who want to use vf_pp. The old API is marked
as deprecated, and doesn't work on Libav. It was broken on FFmpeg, but
has recently started working again - the fields in question were not un-
deprecated though. Instead you're supposed to use a new API, which does
exactly the same thing (what...?).
Also don't pass the QP table with mp_image_copy_attributes() - it
probably does more harm than it's useful.
By the way, with -vf=dlopen=TOOLS/vf_dlopen/showqscale.so, it appears
the table as output by recent FFmpeg is offset by 1 macroblock in X
direction and 2 macroblocks in Y direction, which most likely will
interfere with normal vf_pp operation. However, this is not my problem.
The only real reason for this commit is that we can finally get rid of
all libav* related deprecation warnings. (Though they are constantly
deprecating APIs, so this will not last long.)
We consider FFmpeg 1.x and Libav 0.9.x releases compatible. Support
for FFmpeg 0.9.x and Libav 0.8.x is considered infeasible and has been
dropped in the previous commits. The bits that break compatibility are
mainly the CodecID renaming (trivial, but would require nasty hacks
everywhere), the avcodec_encode_video2() function (missing in older
releases, mandatory in newer ones), and the resampler changes (older
releases miss lib{av,sw}resample, newer versions removed the
libavcodec resampler).
Remove some other compatibility bits that were needed to for releases
for which we drop support.
The comment about Libav 0.9 in compat/libav.h is incorrect and should
have been 0.8 (the symbol is present in Libav 0.9).
Remove `af_resample` and `af_lavcresample`. The former is a mess while the
latter uses an API that was long deprecated in libavcodec and is now removed.
`af_lavrresample` rougly has the same features and structure of
`af_lavcresample`.
libswresample fallback by wm4.
In theory, projects have to define feature test macros to enable various
system functionality in system headers. (This is done so to ensure new
identifiers can be added to system headers, without breaking old
programs by causing name conflicts.) This includes macros like
_GNU_SOURCE, _BSD_SOURCE, _POSIX_C_SOURCE etc.
Traditionally, gcc as well as glibc headers implicitly assumed
_GNU_SOURCE if no feature test macros were defined by the user.
clang did this too to ensure compatibility with gcc centric programs
(which in practice includes most Linux programs).
However, it appears recent clang versions started to prefer BSD
traditional function over the POSIX, which switches the definition
of a function used by mp_msg.c:
pid_t getpgrp(void); /* POSIX.1 version */
pid_t getpgrp(pid_t pid); /* BSD version */
mp_msg.c expects the POSIX version, while clang gives us the BSD
version, resulting in a compilation failure.
Solve this by defining _GNU_SOURCE. This requests most features from
system headers, and explicitly prefers POSIX definitions over BSD,
which should fix the compilation issue.
-fomit-frame-pointer is enabled by default with recent gcc and clang
compilers if -O2 is used. It also breaks debugging when optimization is
disabled, so it makes absolutely no sense to have -fomit-frame-pointer
explicitly in the CFLAGS.
Get rid of -ffast-math too. It's little more than cargo-culting, and
might actually break NaN handling and such things.
All wayland only specific routines are placed in wayland_common.
This makes it easier to write other video outputs.
The EGL specific parts, as well as opengl context creation, are in gl_common.
This backend works for:
* opengl-old
* opengl
* opengl-hq
To use it just specify the opengl backend
--vo=opengl:backend=wayland
or disable the x11 build.
Don't forget to set EGL_PLATFORM to wayland.
Co-Author: Scott Moreau
(Sorry I lost the old commit history due to the file structure changes)
Commit 4d016a9 added some configure tests using statement_check.
They wrongly used $_ld_tmp, which causes random failure, depending on
whether the previous test using $_ld_tmp was successful. This happened
because I blindly copied the statement_checks from somewhere else.
Fix them.
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
