Useless garbage.
This was once added to test whether vdpau presentation feedback could be
used. Results were always unsatisfactory, and now vdpau is dead.
Somewhat similar to the old --cache-file, except for the demuxer cache.
Instead of keeping packet data in memory, it's written to disk and read
back when needed.
The idea is to reduce main memory usage, while allowing fast seeking in
large cached network streams (especially live streams). Keeping the
packet metadata on disk would be rather hard (would use mmap or so, or
rewrite the entire demux.c packet queue handling), and since it's
relatively small, just keep it in memory.
Also for simplicity, the disk cache is append-only. If you're watching
really long livestreams, and need pruning, you're probably out of luck.
This still could be improved by trying to free unused blocks with
fallocate(), but since we're writing multiple streams in an interleaved
manner, this is slightly hard.
Some rather gross ugliness in packet.h: we want to store the file
position of the cached data somewhere, but on 32 bit architectures, we
don't have any usable 64 bit members for this, just the buf/len fields,
which add up to 64 bit - so the shitty union aliases this memory.
Error paths untested. Side data (the complicated part of trying to
serialize ffmpeg packets) untested.
Stream recording had to be adjusted. Some minor details change due to
this, but probably nothing important.
The change in attempt_range_joining() is because packets in cache
have no valid len field. It was a useful check (heuristically
finding broken cases), but not a necessary one.
Various other approaches were tried. It would be interesting to list
them and to mention the pros and cons, but I don't feel like it.
Like hwdec_cuda, you get a big #ifdef mess if you try and keep the
OpenGL and Vulkan interops in the same file. So, I've refactored
them into separate files in a similar way.
Linux analog TV support (via tv://) was excessively complex, and
whenever I attempted to use it (cameras or loopback devices), it didn't
work well, or would have required some major work to update it. It's
very much stuck in the analog past (my favorite are the frequency tables
in frequencies.c for analog TV channels which don't exist anymore).
Especially cameras and such work fine with libavdevice and better than
tv://, for example:
mpv av://v4l2:/dev/video0
(adding --profile=low-latency --untimed even makes it mostly realtime)
Adding a new input layer that targets such "modern" uses would be
acceptable, if anyone is interested in it. The old TV code is just too
focused on actual analog TV.
DVB is rather obscure, but has an active maintainer, so don't remove it.
However, the demux/stream ctrl layer must go, so remove controls for
channel switching. Most of these could be reimplemented by using the
normal method for option runtime changes.
This removes anything related to DVD/BD/CD that negatively affected the
core code. It includes trying to rewrite timestamps (since DVDs and
Blurays do not set packet stream timestamps to playback time, and can
even have resets mid-stream), export of chapters, stream languages,
export of title/track lists, and all that.
Only basic seeking is supported. It is very much possible that seeking
completely fails on some discs (on some parts of the timeline), because
timestamp rewriting was removed.
Note that I don't give a shit about optical media. If you want to watch
them, rip them. Keeping some bare support for DVD/BD is the most I'm
going to do to appease the type of lazy, obnoxious users who will care.
There are other players which are better at optical discs.
stream_dvd.c contained large amounts of ancient, unmaintained code,
which has been historically moved to libdvdnav. Basically, it's full of
low level parsing of DVD on-disc structures.
Kill it for good. Users can use the remaining dvdnav support (which
basically operates in non-menu mode). Users have reported that
libdvdread sometimes works better, but this is just libdvdnav's problem
and not ours.
Mesa supports the EGL_CHROMIUM_sync_control extension, and it's
available out of the box with AMD drivers. In practice, this is exactly
the same as GLX_OML_sync_control, but for EGL. The extension
specification is separate from the GLX one though, and buried somewhere
in the Chromium code.
This appears to work, although I don't know if it really works.
In theory, this could be useful for other EGL targets. Support code for
it could have been added to egl_helpers.c to avoid some minor duplicated
glue code if another EGL target were to provide this extension. I didn't
bother with that. ANGLE on Windows can't support it, because the
extension spec. explicitly requires POSIX timers. ANGLE on Linux/OSX is
actively harmful for mpv and hopefully won't ever use it. Wayland uses
EGL, but has its own fancy presentation feedback stuff (and besides, I
don't think basic video player functionality works on Wayland at all).
context_drm_egl maybe? But I think DRM has its own stuff.
So the next commit can make EGL use it. EGL has a quite similar
function, that practically works the same. Although it's relatively
trivial, it's still tricky, and probably shouldn't end up as duplicated
code.
There are no functional changes, except initialization, and how failure
of the glXGetSyncValues call is handled. Also, some comments mention the
EGL extension.
Note that there's no intention for this code to handle anything else
than the very specific OML sync extension (and its EGL equivalent). This
is just too weirdly specific to the weird idiosyncrasies of the
extension, and it makes no sense to extend it to handle anything else.
(Such as Wayland or DXGI presentation feedback.)
This change introduces a vulkan interop path for the vaapi hwdec.
The basic principles are mostly the same as for EGL, with the
exported dma_buf being imported by Vukan. The biggest difference
is that we cannot reuse the texture as we do with OpenGL - there's
no way to rebind a VkImage to a different piece of memory, as far
as I can see. So, a new texture is created on each map call.
I did not bother implementing a code path for the old libva API as
I think it's safe to assume any system with a working vulkan driver
will have access to a newer libva.
Note that we are using separate layers for the vaapi surface, just
as is done for EGL. This is because libplacebo doesn't support
multiplane images.
This change does not include format negotiation because no driver
implements the vk_ext_image_drm_format_modifier extension that
would be required to do that. In practice, the two formats we care
about (nv12, p010) work correctly, so we are not blocked. A separate
change had to be made in libplacebo to filter out non-fatal validation
errors related to surface sizes due to the lack of format negotiation.
This is a straightforward parallel implementation of error diffusion
algorithms in compute shader. Basically we use single work group with
maximal possible size to process the whole image. After a shift
mapping we are able to process all pixels column by column.
A large ring buffer are allocated in shared memory to speed things up.
However the size of required shared memory depends linearly on the
height of video window (or screen height in fullscreen mode). In case
there is no enough shared memory, it will fallback to `--dither=fruit`.
The maximal allowed work group size is hardcoded as 1024. Ideally we
could query `GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS`. But for whatever
reason, it seems most high end card from nvidia and amd support only
the minimal required value, so I guess we can stick to it for now.
The amount of code now present that's specific to Vulkan or OpenGL
has reached the point where we really want to split it out to
avoid a mess of #ifdefs.
At the same time, I'm moving the code to an api neutral location.
This commit rips out the entire mpv vulkan implementation in favor of
exposing lightweight wrappers on top of libplacebo instead, which
provides much of the same except in a more up-to-date and polished form.
This (finally) unifies the code base between mpv and libplacebo, which
is something I've been hoping to do for a long time.
Note: The ra_pl wrappers are abstract enough from the actual libplacebo
device type that we can in theory re-use them for other devices like
d3d11 or even opengl in the future, so I moved them to a separate
directory for the time being. However, the rest of the code is still
vulkan-specific, so I've kept the "vulkan" naming and file paths, rather
than introducing a new `--gpu-api` type. (Which would have been ended up
with significantly more code duplicaiton)
Plus, the code and functionality is similar enough that for most users
this should just be a straight-up drop-in replacement.
Note: This commit excludes some changes; specifically, the updates to
context_win and hwdec_cuda are deferred to separate commits for
authorship reasons.
quite a lot of the title bar functionality and logic was within our
window. since we recently added a custom title bar class to our window
i decided to move all that functionality into that class and in its
own file.
this is also a preparation for the next commits.
Manual changes done:
* Merged the interface-changes under the already master'd changes.
* Moved the hwdec-related option changes to video/decode/vd_lavc.c.
This option has been deprecated upstream for a long time, probably
doesn't even work anymore, and won't work moving forwards as we replace
the vulkan code by libplacebo wrappers.
I haven't removed the option completely yet since in theory we could
still add support for e.g. a native glslang wrapper in the future. But
most likely the future of this code is deletion.
As an aside, fix an issue where the man page didn't mention d3d11.
The demuxer cache is the only cache now. Might need another change to
combat seeking failures in mp4 etc. The only bad thing is the loss of
cache-speed, which was sort of nice to have.
mpv.com fails to build when cross-compiling with a multilib version
of GCC, because the -m32 flags aren't getting passed to the build
process for osdep/win32-console-wrapper.c or the link phase for
mpv.com itself.
This started breaking with newer (2.0.x) waf versions, and it was
noticed that a built-in waf module was providing very similar
functionality.
APPNAME definition was required to have `gnu_dirs`' PACKAGE
variable to be defined in order to have f.ex. documentation
installed to the correct directory.
Currently unused options added by `gnu_dirs` were removed to clean
up the output of the help command.
Effective changes to behavior:
- `gnu_dirs` will attempt to figure out if it needs to use lib64
instead of lib within your installation prefix. If you would
like it to not do that, set `--libdir` during configuration.
The way it tries to figure lib/lib64 out is if there's a
`/usr/lib64` and no `/usr/lib32`.
- `--incdir` is now `--includedir` as per standard `gnu_dirs`
behavior.
this reverts commit a174566 since the actually reason for failing has
been found. the isysroot flag overwrites the framework and library
search paths. though we only need to overwrite the former and there is
no way to just overwrite that one. we manually add the standard library
search paths to the very end of the linking command, so it won't
interfere with the search paths extracted by waf.
Fixes#5791
This is almost like rendezvous(), except it allows async wakeup, and
does not require global state. It will be used by a later commit.
struct mp_waiter is intended to be allocated on the stack, and uses an
initializer including PTHREAD_MUTEX_INITIALIZER. This is the first case
in mpv that it uses PTHREAD_MUTEX_INITIALIZER for stack-allocated
mutexes. It seems POSIX still does not allow this formally, but since
POSIX is worth less than used toilet paper, I don't really care. Modern
OSes use futexes, which means you can make _every_ memory location a
lock, and this code tries to make use of it, without using OS specific
code.
The name of the source file is rather generic, because I intend to dump
further small helpers there (or maybe move mp_rendezvous() to it).
The CUDA dynamic loader was broken out of ffmpeg into its own repo
and package. This gives us an opportunity to re-use it in mpv and
remove our custom loader logic.
The purpose of the new API is to make it useable with other APIs than
OpenGL, especially D3D11 and vulkan. In theory it's now possible to
support other vo_gpu backends, as well as backends that don't use the
vo_gpu code at all.
This also aims to get rid of the dumb mpv_get_sub_api() function. The
life cycle of the new mpv_render_context is a bit different from
mpv_opengl_cb_context, and you explicitly create/destroy the new
context, instead of calling init/uninit on an object returned by
mpv_get_sub_api().
In other to make the render API generic, it's annoyingly EGL style, and
requires you to pass in API-specific objects to generic functions. This
is to avoid explicit objects like the internal ra API has, because that
sounds more complicated and annoying for an API that's supposed to never
change.
The opengl_cb API will continue to exist for a bit longer, but
internally there are already a few tradeoffs, like reduced
thread-safety.
Mostly untested. Seems to work fine with mpc-qt.
the swift object file wasn't linked when libmpv was linked, which
resulted in a missing symbol error. add the swift object to the linking
list for libmpv too.
Fixes#5522
this is meant to replace the old and not properly working vo_gpu/opengl
cocoa backend in the future. the problems are various shortcomings of
Apple's opengl implementation and buggy behaviour in certain
circumstances that couldn't be properly worked around. there are also
certain regressions on newer macOS versions from 10.11 onwards.
- awful opengl performance with a none layer backed context
- huge amount of dropped frames with an early context flush
- flickering of system elements like the dock or volume indicator
- double buffering not properly working with a none layer backed context
- bad performance in fullscreen because of system optimisations
all the problems were caused by using a normal opengl context, that
seems somewhat abandoned by apple, and are fixed by using a layer backed
opengl context instead. problems that couldn't be fixed could be
properly worked around.
this has all features our old backend has sans the wid embedding,
the possibility to disable the automatic GPU switching and taking
screenshots of the window content. the first was deemed unnecessary by
me for now, since i just use the libmpv API that others can use anyway.
second is technically not possible atm because we have to pre-allocate
our opengl context at a time the config isn't read yet, so we can't get
the needed property. third one is a bit tricky because of deadlocking
and it needed to be in sync, hopefully i can work around that in the
future.
this also has at least one additional feature or eye-candy. a properly
working fullscreen animation with the native fs. also since this is a
direct port of the old backend of the parts that could be used, though
with adaptions and improvements, this looks a lot cleaner and easier to
understand.
some credit goes to @pigoz for the initial swift build support which
i could improve upon.
Fixes: #5478, #5393, #5152, #5151, #4615, #4476, #3978, #3746, #3739,
#2392, #2217
Use the decoder wrapper that was introduced for video. This removes all
code duplication the old audio decoder wrapper had with the video code.
(The audio wrapper was copy pasted from the video one over a decade ago,
and has been kept in sync ever since by the power of copy&paste. Since
the original copy&paste was possibly done by someone who did not answer
to the LGPL relicensing, this should also remove all doubts about
whether any of this code is left, since we now completely remove any
code that could possibly have been based on it.)
There is some complication with spdif handling, and a minor behavior
change (it will restrict the list of codecs to spdif if spdif is to be
used), but there should not be any difference in practice.
Move dec_video.c to filters/f_decoder_wrapper.c. It essentially becomes
a source filter. vd.h mostly disappears, because mp_filter takes care of
the dataflow, but its remains are in struct mp_decoder_fns.
One goal is to simplify dataflow by letting the filter framework handle
it (or more accurately, using its conventions). One result is that the
decode calls disappear from video.c, because we simply connect the
decoder wrapper and the filter chain with mp_pin_connect().
Another goal is to eventually remove the code duplication between the
audio and video paths for this. This commit prepares for this by trying
to make f_decoder_wrapper.c extensible, so it can be used for audio as
well later.
Decoder framedropping changes a bit. It doesn't seem to be worse than
before, and it's an obscure feature, so I'm content with its new state.
Some special code that was apparently meant to avoid dropping too many
frames in a row is removed, though.
I'm not sure how the source code tree should be organized. For one,
video/decode/vd_lavc.c is the only file in its directory, which is a bit
annoying.
Get rid of the old vf.c code. Replace it with a generic filtering
framework, which can potentially handle more than just --vf. At least
reimplementing --af with this code is planned.
This changes some --vf semantics (including runtime behavior and the
"vf" command). The most important ones are listed in interface-changes.
vf_convert.c is renamed to f_swscale.c. It is now an internal filter
that can not be inserted by the user manually.
f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed
once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is
conceptually easy, but a big mess due to the data flow changes).
The existing filters are all changed heavily. The data flow of the new
filter framework is different. Especially EOF handling changes - EOF is
now a "frame" rather than a state, and must be passed through exactly
once.
Another major thing is that all filters must support dynamic format
changes. The filter reconfig() function goes away. (This sounds complex,
but since all filters need to handle EOF draining anyway, they can use
the same code, and it removes the mess with reconfig() having to predict
the output format, which completely breaks with libavfilter anyway.)
In addition, there is no automatic format negotiation or conversion.
libavfilter's primitive and insufficient API simply doesn't allow us to
do this in a reasonable way. Instead, filters can use f_autoconvert as
sub-filter, and tell it which formats they support. This filter will in
turn add actual conversion filters, such as f_swscale, to perform
necessary format changes.
vf_vapoursynth.c uses the same basic principle of operation as before,
but with worryingly different details in data flow. Still appears to
work.
The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are
heavily changed. Fortunately, they all used refqueue.c, which is for
sharing the data flow logic (especially for managing future/past
surfaces and such). It turns out it can be used to factor out most of
the data flow. Some of these filters accepted software input. Instead of
having ad-hoc upload code in each filter, surface upload is now
delegated to f_autoconvert, which can use f_hwupload to perform this.
Exporting VO capabilities is still a big mess (mp_stream_info stuff).
The D3D11 code drops the redundant image formats, and all code uses the
hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a
big mess for now.
f_async_queue is unused.
This enables DXVA2 hardware decoding with ra_d3d11. It should be useful
for Windows 7, where D3D11VA is not available. Images are transfered
from D3D9 to D3D11 using D3D9Ex surface sharing[1].
Following Microsoft's recommendations, it uses a queue of shared
surfaces, similar to Microsoft's ISurfaceQueue. This will hopefully
prevent surface sharing from impacting parallelism and allow multiple
D3D11 frames to be in-flight at once.
[1]: https://msdn.microsoft.com/en-us/library/windows/desktop/ee913554.aspx
This hack was part of a solution to VSync judder in desktop OpenGL on
Windows. Rather than using blocking-SwapBuffers(), mpv could use
DwmFlush() to wait for the image to be presented by the compositor.
Since this would only work while the compositor was running, and the
compositor was silently disabled when OpenGL entered exclusive
fullscreen mode, mpv needed a way to detect exclusive fullscreen mode.
The code that is being removed could detect exclusive fullscreen mode by
checking the state of an undocumented mutex using undocumented native
API functions, but because of how fragile it was, it was always meant to
be removed when a better solution for accurate VSync in OpenGL was
found. Since then, mpv got the dxinterop backend, which uses desktop
OpenGL but has accurate VSync. It also got a native Direct3D 11 backend,
which is a viable alternative to OpenGL on Windows.
For people who are still using desktop OpenGL with WGL, there shouldn't
be much of a difference, since mpv can use other API functions to detect
exclusive fullscreen.
This implements a poll-compatible interface, backed by select on macOS,
suitable for polling on device files - which are not supported by
macOS's implementation of poll. This is a (long-standing) bug in macOS,
so hopefully we can eventually remove this shim.
The libavcodec mediacodec support does not conform to the new hwaccel
APIs yet. It has been agreed uppon that this glue code can be deleted
for now, and support for it will be restored at a later point.
Readding would require that it supports the AVCodecContext.hw_device_ctx
API. The hw_device_ctx would then contain the surface ID.
vo_mediacodec_embed would actually perform the task of creating
vo.hwdec_devs and adding a mp_hwdec_ctx, whose av_device_ref is a
AVHWDeviceContext containing the android surface.
It makes more sense to have it in the general video directory (along
with vdpau.c and vaapi.c), since the decoder source files don't even
access it anymore.
Like with all hwaccels, there's little that is actually specific to
decoding (which has been moved away anyway), and what is left are
declarations (which will also go away soon).
This has stopped being useful a long time ago, and it's the only GPL
source file in the vo_gpu source directories. Recently it wasn't even
loaded at all, unless you forced loading it.
Oops. This is part of the TV code, for which we didn't make any effort
to relicense. But files were always built, because they didn't depend on
the common TV code. (The HAVE_GPL in the source file exposed this by
making the build fail.)
These couldn't be relicensed, and won't survive the LGPL transition. The
other existing filters are mostly LGPL (except libaf glue code).
This remove the deprecated pan option. I guess it could be restored by
inserting a libavfilter filter (if there's one), but for now let it be
gone.
This temporarily breaks volume control (and things related to it, like
replaygain).
They were added to the "to deleted" list and never relicensed, because I
thought I'd delete them early. But it's possible that they'll stay in
mpv for a longer time, so relicense them. Still leaving them as
deprecated and scheduled for removal, so they can still be dropped once
there is a better way to deal with them, if they get annoying, or if a
better mechanism is found that makes them unnecessary.
All contributors agreed. There are some minor changes by people who did
not agree, but these are all not relevant or have been removed.
Almost all of them had their guts removed and replaced by libavfilter
long ago, but remove them anyway. They're pointless and have been
scheduled for deprecation.
Still leave vf_format (because we need it in some form) and vf_sub (not
sure).
This will break some builtin functionality: lavfi yadif defaults are
different, auto rotation and stereo3d downconversion are broken. These
might be fixed later.
We want to drop vf_scale, but we still need a way to auto convert
between imgfmts. In particular, vf.c will auto insert the "scale" filter
if the VO doesn't support a pixfmt.
To avoid chaos, create a new vf_convert.c filter, based on vf_scale.c,
but without the unrelicensed code parts. In particular, this filter does
not do scaling and has no options. It merely converts from one imgfmt to
another, if needed.
This is a new RA/vo_gpu backend that uses Direct3D 11. The GLSL
generated by vo_gpu is cross-compiled to HLSL with SPIRV-Cross.
What works:
- All of mpv's internal shaders should work, including compute shaders.
- Some external shaders have been tested and work, including RAVU and
adaptive-sharpen.
- Non-dumb mode works, even on very old hardware. Most features work at
feature level 9_3 and all features work at feature level 10_0. Some
features also work at feature level 9_1 and 9_2, but without high-bit-
depth FBOs, it's not very useful. (Hardware this old is probably not
fast enough for advanced features anyway.)
Note: This is more compatible than ANGLE, which requires 9_3 to work
at all (GLES 2.0,) and 10_1 for non-dumb-mode (GLES 3.0.)
- Hardware decoding with D3D11VA, including decoding of 10-bit formats
without truncation to 8-bit.
What doesn't work / can be improved:
- PBO upload and direct rendering does not work yet. Direct rendering
requires persistent-mapped PBOs because the decoder needs to be able
to read data from images that have already been decoded and uploaded.
Unfortunately, it seems like persistent-mapped PBOs are fundamentally
incompatible with D3D11, which requires all resources to use driver-
managed memory and requires memory to be unmapped (and hence pointers
to be invalidated) when a resource is used in a draw or copy
operation.
However it might be possible to use D3D11's limited multithreading
capabilities to emulate some features of PBOs, like asynchronous
texture uploading.
- The blit() and clear() operations don't have equivalents in the D3D11
API that handle all cases, so in most cases, they have to be emulated
with a shader. This is currently done inside ra_d3d11, but ideally it
would be done in generic code, so it can take advantage of mpv's
shader generation utilities.
- SPIRV-Cross is used through a NIH C-compatible wrapper library, since
it does not expose a C interface itself.
The library is available here: https://github.com/rossy/crossc
- The D3D11 context could be made to support more modern DXGI features
in future. For example, it should be possible to add support for
high-bit-depth and HDR output with DXGI 1.5/1.6.
This commit allows to use the AV_PIX_FMT_DRM_PRIME newly introduced
format in ffmpeg that allows decoders to provide an AVDRMFrameDescriptor
struct.
That struct holds dmabuf fds and information allowing zerocopy rendering
using KMS / DRM Atomic.
This has been tested on RockChip ROCK64 device.
Signed-off-by: wm4 <wm4@nowhere>
Rename --stats to --load-stats-overlay and add an entry to options.rst
over the original commit.
Signed-off-by: wm4 <wm4@nowhere>
At the moment, rendering on Android requires ``--vo=opengl-cb`` and
a lot of java<->c++ bridging code to receive the receive and react to
the render callback in java. Performance also suffers with opengl-cb,
due to the overhead of context switching in JNI.
With this patch, Android can render using ``--vo=gpu --gpu-context=android``
(after setting ``--wid`` to point to an android.view.Surface on-screen).
The wayland code was written more than 4 years ago when wayland wasn't
even at version 1.0. This commit rewrites everything in a more modern way,
switches to using the new xdg v6 shell interface which solves a lot of bugs
and makes mpv tiling-friedly, adds support for drag and drop, adds support
for touchscreens, adds support for KDE's server decorations protocol,
and finally adds support for the new idle-inhibitor protocol.
It does not yet use the frame callback as a main rendering loop driver,
this will happen with a later commit.
Originally mpv vaapi support was based on the MPlayer-vaapi patches.
These were never merged in upstream MPlayer. The license headers
indicated they were GPL-only. Although the actual author agreed to
relicensing, the company employing him to write this code did not, so
the original code is unusable to us.
Fortunately, vaapi support was refactored and rewritten several times,
meaning little code is actually left. The previous commits removed or
moved that to GPL-only code. Namely, vo_vaapi.c remains GPL-only. The
other code went away or became unnecessary mainly because libavcodec
itself gained the ability to manage the hw decoder, and libavutil
provides code to manage vaapi surfaces. We also changed to mainly using
EGL interop, making any of the old rendering code unnecessary.
hwdec_vaglx.c is still GPL. It's possibly relicensable, because much of
it was changed, but I'm not too sure and further investigation would be
required. Also, this has been disabled by default for a while now, so
bothering with this is a waste of time. This commit simply disables it
at compile time as well in LGPL mode.
Now you need FFmpeg git, or something.
This also gets rid of the last real use of gpu_memcpy(). libavutil does
that itself. (vaapi.c still used it, but it was essentially unused,
because the code path isn't really in use anymore. It wasn't even
included due to the d3d-hwaccel dependency in wscript.)
In addition to the built-in nvidia compiler, we now also support a
backend based on libshaderc. shaderc is sort of like glslang except it
has a C API and is available as a dynamic library.
The generated SPIR-V is now cached alongside the VkPipeline in the
cached_program. We use a special cache header to ensure validity of this
cache before passing it blindly to the vulkan implementation, since
passing invalid SPIR-V can cause all sorts of nasty things. It's also
designed to self-invalidate if the compiler gets better, by offering a
catch-all `int compiler_version` that implementations can use as a cache
invalidation marker.
This time based on ra/vo_gpu. 2017 is the year of the vulkan desktop!
Current problems / limitations / improvement opportunities:
1. The swapchain/flipping code violates the vulkan spec, by assuming
that the presentation queue will be bounded (in cases where rendering
is significantly faster than vsync). But apparently, there's simply
no better way to do this right now, to the point where even the
stupid cube.c examples from LunarG etc. do it wrong.
(cf. https://github.com/KhronosGroup/Vulkan-Docs/issues/370)
2. The memory allocator could be improved. (This is a universal
constant)
3. Could explore using push descriptors instead of descriptor sets,
especially since we expect to switch descriptors semi-often for some
passes (like interpolation). Probably won't make a difference, but
the synchronization overhead might be a factor. Who knows.
4. Parallelism across frames / async transfer is not well-defined, we
either need to use a better semaphore / command buffer strategy or a
resource pooling layer to safely handle cross-frame parallelism.
(That said, I gave resource pooling a try and was not happy with the
result at all - so I'm still exploring the semaphore strategy)
5. We aggressively use pipeline barriers where events would offer a much
more fine-grained synchronization mechanism. As a result of this, we
might be suffering from GPU bubbles due to too-short dependencies on
objects. (That said, I'm also exploring the use of semaphores as a an
ordering tactic which would allow cross-frame time slicing in theory)
Some minor changes to the vo_gpu and infrastructure, but nothing
consequential.
NOTE: For safety, all use of asynchronous commands / multiple command
pools is currently disabled completely. There are some left-over relics
of this in the code (e.g. the distinction between dev_poll and
pool_poll), but that is kept in place mostly because this will be
re-extended in the future (vulkan rev 2).
The queue count is also currently capped to 1, because of the lack of
cross-frame semaphores means we need the implicit synchronization from
the same-queue semantics to guarantee a correct result.
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This code could not be relicensed. The intention was to write new filter
code (which could handle both audio and video), but that's a bit of
work. Write some code that can do audio conversion (resampling,
downmixing, etc.) without the old audio filter chain code in order to
speed up the LGPL relicensing.
If you build with --disable-libaf, nothing in audio/filter/* is compiled
in. It breaks a few features, such as --volume, --af, pitch correction
on speed changes, replaygain.
Most likely this adds some bugs, even if --disable-libaf is not used.
(How the fuck does EOF notification work again anyway?)
Move it from af_lavrresample.c to a new aconverter.c file, which is
independent from the filter chain code. It also doesn't use mp_audio,
and thus has no GPL dependencies.
Preparation for later commits. Not particularly well tested, so have
fun.
Both the video equalizer command/option glue, which drives this filter,
as well as the filter itself are slightly GPL contaminated. So it goes.
After this commit, "--vf=eq" will actually use libavfilter's vf_eq (if
FFmpeg was compiled in GPL mode), but it has different options and will
not listen to the equalizer VOCTRLs.
This is pretty pointless, but I believe it allows us to claim that the
new code is not affected by the copyright of the old code. This is
needed, because the original mp_audio struct was written by someone who
has disagreed with LGPL relicensing (it was called af_data at the time,
and was defined in af.h).
The "GPL'ed" struct contents that surive are pretty trivial: just the
data pointer, and some metadata like the format, samplerate, etc. - but
at least in this case, any new code would be extremely similar anyway,
and I'm not really sure whether it's OK to claim different copyright. So
what we do is we just use AVFrame (which of course is LGPL with 100%
certainty), and add some accessors around it to adapt it to mpv
conventions.
Also, this gets rid of some annoying conventions of mp_audio, like the
struct fields that require using an accessor to write to them anyway.
For the most part, this change is only dumb replacements of mp_audio
related functions and fields. One minor actual change is that you can't
allocate the new type on the stack anymore.
Some code still uses mp_audio. All audio filter code will be deleted, so
it makes no sense to convert this code. (Audio filters which are LGPL
and which we keep will have to be ported to a new filter infrastructure
anyway.) player/audio.c uses it because it interacts with the old filter
code. push.c has some complex use of mp_audio and mp_audio_buffer, but
this and pull.c will most likely be rewritten to do something else.
This extracts non-ANGLE specific code to d3d11_helpers.c, which is
modeled after egl_helpers.c. Currently the only consumer is
context_angle.c, but in future this may allow the D3D11 device and
swapchain creation logic to be reused in other backends.
Also includes small improvements to D3D11 device creation. It is now
possible to create feature level 11_1 devices (though ANGLE does not
support these,) and BGRA swapchains, which might be slightly more
efficient than ARGB, since its the same format used by the compositor.
Actually GL-specific parts go into gl_utils.c/h, the shader cache
(gl_sc*) into shader_cache.c/h.
No semantic changes of any kind, except that the VAO helper is made
public again as part of gl_utils.c (all while the goal for gl_utils.c
itself is to be included by GL-specific code).
This starts work on moving OpenGL-specific code out of the general
renderer code, so that we can support other other GPU APIs. This is in
a very early stage and it's only a proof of concept. It's unknown
whether this will succeed or result in other backends.
For now, the GL rendering API ("ra") and its only provider (ra_gl) does
texture creation/upload/destruction only. And it's used for the main
video texture only. All other code is still hardcoded to GL.
There is some duplication with ra_format and gl_format handling. In the
end, only the ra variants will be needed (plus the gl_format table of
course). For now, this is simpler, because for some reason lots of hwdec
code still requires the GL variants, and would have to be updated to
use the ra ones.
Currently, the video.c code accesses private ra_gl fields. In the end,
it should not do that of course, and it would not include ra_gl.h.
Probably adds bugs, but you can keep them.
Now it's sourced from the etc/ PNG files directly, instead of
preprocessing them with imagemagick.
Add some ad-hoc code to decode PNG files with libavcodec. At least we
can drop the zlib code in exchange.
This partially reverts the change from a longer time ago to always build
DXVA2 and D3D11VA together.
To make it simpler, we change the following:
- building with ANGLE headers is now required to build D3D hwaccels
- if DXVA2 is enabled, D3D11VA is still forcibly built
- the CLI vo_opengl ANGLE backend is now under --egl-angle-win32
This is done to reduce the dependency mess slightly.
In a bunch of cases, we emulate highly platform specific APIs on a
higher level across all OSes, such as IPC, terminal, subprocess
handling, and more. We have source files for each OS, and they implement
all the same mpv internal API.
Selecting which source file to use on an OS can be tricky, because there
is partially overlapping and emulated APIs (consider Cygwin on Windows).
Add a pick_first_matching_dep() function to make this slightly easier
and more structured.
Also add dummy backends in some cases, to deal with APIs not being
available.
Clarify the Windows dependency identifiers, as these are the most
confusing.
It was an attempt to move some MPlayer filters (which were removed from
mpv) to external, loadable filters. That worked well, but then the
MPlayer filters were ported to libavfilter (independently), so they're
available again. Also there is a more widely supported and more advanced
loadable filter system supported by mpv: vapoursynth.
In conclusion, vf_dlopen is not useful anymore, confusing, and requires
quite a bit of code (and probably wouldn't survive the rewrite of the
mpv video filter chain, which has to come at some point). It has some
implicit dependencies on internal conventions, like possibly the format
names dropped in the previous commit.
We also deprecated it last release. Drop it.
Implements JS with almost identical API to the Lua support.
Key differences from Lua:
- The global mp, mp.msg and mp.utils are always available.
- Instead of returning x, error, return x and expose mp.last_error().
- Timers are JS standard set/clear Timeout/Interval.
- Supports CommonJS modules/require.
- Added at mp.utils: getenv, read_file, write_file and few more.
- Global print and dump (expand objects) functions.
- mp.options currently not supported.
See DOCS/man/javascript.rst for more details.
This drops support for the old libavcodec APIs. Now FFmpeg 3.3 or FFmpeg
git is required. Libav has no release with the new APIs yet, so for
Libav git as of a few weeks or months ago or so is required if you want
to use Libav.
Not much actually changes in hwdec_vaegl.c - some code is removed, but
the reindentation inflates the diff.
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes#4250.
Reallows enabling dvdnav without enabling dvdread which was broken
in 77cbb3543 when they were both disabled by default.
Since dvdnav requires dvdread, we can enable dvdread:// even if
--enable-dvdread isn't passed.
Fixes#4290
Add subtitle filter to remove additions for deaf or hard-of-hearing
(SDH). This is for English, but may in part work for others too.
This is an ASS filter and the intention is that it can always be
enabled as it by default do not remove parts that may be normal text.
Harder filtering can be enabled with an additional option.
Signed-off-by: wm4 <wm4@nowhere>
This was mostly self-contained, so its removal makes w32_common.c a bit
easier to read. Also, because it was self contained and its author has
agreed to LGPL relicencing, the new file has the LGPL licence header.
Remove low quality drc filter. Anyone whishing to have dynamic range
compression should use the much more powerful acompressor ffmpeg filter:
mpv --af=lavfi=[acompressor] INPUT
Or with parameters:
mpv --af=lavfi=[acompressor=threshold=-25dB:ratio=3:makeup=8dB] INPUT
Refer to https://ffmpeg.org/ffmpeg-filters.html#acompressor for a full
list of supported parameters.
Signed-off-by: wm4 <wm4@nowhere>
The new API works like the new vaapi API, using generic hwaccel support.
One minor detail is the error message that will be printed if using
non-4:2:0 surfaces (which as far as I can tell is completely broken in
the nVidia drivers and thus not supported by mpv). The HEVC warning
(which is completely broken in the nVidia drivers but should work with
Mesa) had to be added to the generic hwaccel code.
This also trashes display preemption recovery. Fuck that. It never
really worked. If someone complains, I might attempt to add it back
somehow.
This is the 4th iteration of the libavcodec vdpau API (after the
separate decoder API, the manual hwaccel API, and the automatic vdpau
hwaccel API). Fortunately, further iterations will be generic, and not
require much vdpau-specific changes (if any at all).
As the manpage says, this has no value other than adding bugs.
It uses code based on context_x11.c, and basically does very stripped
down context creation (no alpha support etc.). It uses vdpau for
display, and maps vdpau output surfaces as FBOs to render into them.
This might be good to experiment with asynchronous presentation. For
now, it presents synchronously, with a 4 frame delay (which should whack
off A/V sync). The forced 4 frame delay is probably also why interaction
feels slower.
There are some weird vdpau errors on resizing and uninit. No idea what
causes them.
hw_vaapi.c didn't do much interesting anymore. Other than the function
to create a device for decoding with vaapi-copy, everything can be done
by generic code. Other libavcodec hwaccels are planned to provide the
same API as vaapi. It will be possible to drop the other hw_ files in
the future. They will use this generic code instead.
This was a hack to let libmpv API users pass a d3d device to mpv. It's
not needed anymore for 2 reasons:
1. ANGLE does not have this problem
2. Even native GL via nVidia (where this failed) seems to not require
this anymore
Implements --hwdec=videotoolbox on iOS. Similar to hwdec_osx.c, but
using CVPixelBuffer APIs available on iOS instead of the equivalent
IOSurface APIs in macOS.
The code for copying a videotoolbox surface to mp_image was duplicated
(with some minor differences - I picked the hw_videotoolbox.c version,
because it was "better"). mp_imgfmt_from_cvpixelformat() is somewhat
duplicated with the vt_formats[] table, but this will be fixed in a
later commit, and moving the function to shared code is preparation.
This basically reuses the scripting infrastructure.
Note that this needs to be explicitly enabled at compilation. For one,
enabling export for certain symbols from an executable seems to be quite
toolchain-specific. It might not work outside of Linux and cause random
problems within Linux.
If C plugins actually become commonly used and this approach is starting
to turn out as a problem, we can build mpv CLI as a wrapper for libmpv,
which would remove the requirement that plugins pick up host symbols.
I'm being lazy, so implementation/documentation are parked in existing
files, even if that stuff doesn't necessarily belong there. Sue me, or
better send patches.
The old API is deprecated, and libavcodec prints a warning at runtime.
The new API is a bit nicer and does many things for you, such as
managing the underlying hwaccel decoder. libavutil also provides code
for managing surfaces (we use their surface pool).
The new code does not contain any code from the original MPlayer VAAPI
patch (that was used as base for some of the vaapi code in mpv). Thus
the new code is LGPL.
The new API actually does not add any visible symbols, so the only way
to detect it is a version check. Of course, the versions overlap
between FFmpeg and Libav, which requires additional care. The new
API did not get merged into FFmpeg yet, so there's no check for
FFmpeg.
The reST contents directive is added to mpv.rst.
In wscript_build.py, the --strip-elements-with-class=contents option is
needed for the rst2man call in order to prevent the TOC from appearing
in mpv.1.
'cuda-gl' isn't right - you can turn this on without any GL and
get some non-zero benefit (with the cuda-copy hwaccel). So
'cuda-hwaccel' seems more consistent with everything else.
Move the embedded string with the builtin profiles to a separate
builtin.conf file. This makes it easier to read and edit, and you can
also check it for errors with --include=etc/builtin.conf. (Normally
errors are hidden intentionally, because there's no way to output error
messages this early, and because some options might not be present on
all platforms or with all configurations.)
Minimal support just for testing.
Only the window surface creation (including size determination) is
really platform specific, so this could be some generic thing with
platform-specific support as some sort of sub-driver, but on the other
hand I don't see much of a need for such a thing.
While most of the fbdev usage is done by the EGL driver, using this
fbdev ioctl is apparently the only way to get the display resolution.
This overlay support specifically skips the OpenGL rendering chain, and
uses GL rendering only for OSD/subtitles. This is for devices which
don't have performant GL support.
hwdec_rpi.c contains code ported from vo_rpi.c. vo_rpi.c is going to be
deprecated. I left in the code for uploading sw surfaces (as it might
be slightly more efficient for rendering sw decoded video), although
it's dead code for now.
Nvidia's "NvDecode" API (up until recently called "cuvid" is a cross
platform, but nvidia proprietary API that exposes their hardware
video decoding capabilities. It is analogous to their DXVA or VDPAU
support on Windows or Linux but without using platform specific API
calls.
As a rule, you'd rather use DXVA or VDPAU as these are more mature
and well supported APIs, but on Linux, VDPAU is falling behind the
hardware capabilities, and there's no sign that nvidia are making
the investments to update it.
Most concretely, this means that there is no VP8/9 or HEVC Main10
support in VDPAU. On the other hand, NvDecode does export vp8/9 and
partial support for HEVC Main10 (more on that below).
ffmpeg already has support in the form of the "cuvid" family of
decoders. Due to the design of the API, it is best exposed as a full
decoder rather than an hwaccel. As such, there are decoders like
h264_cuvid, hevc_cuvid, etc.
These decoders support two output paths today - in both cases, NV12
frames are returned, either in CUDA device memory or regular system
memory.
In the case of the system memory path, the decoders can be used
as-is in mpv today with a command line like:
mpv --vd=lavc:h264_cuvid foobar.mp4
Doing this will take advantage of hardware decoding, but the cost
of the memcpy to system memory adds up, especially for high
resolution video (4K etc).
To avoid that, we need an hwdec that takes advantage of CUDA's
OpenGL interop to copy from device memory into OpenGL textures.
That is what this change implements.
The process is relatively simple as only basic device context
aquisition needs to be done by us - the CUDA buffer pool is managed
by the decoder - thankfully.
The hwdec looks a bit like the vdpau interop one - the hwdec
maintains a single set of plane textures and each output frame
is repeatedly mapped into these textures to pass on.
The frames are always in NV12 format, at least until 10bit output
supports emerges.
The only slightly interesting part of the copying process is that
CUDA works by associating PBOs, so we need to define these for
each of the textures.
TODO Items:
* I need to add a download_image function for screenshots. This
would do the same copy to system memory that the decoder's
system memory output does.
* There are items to investigate on the ffmpeg side. There appears
to be a problem with timestamps for some content.
Final note: I mentioned HEVC Main10. While there is no 10bit output
support, NvDecode can return dithered 8bit NV12 so you can take
advantage of the hardware acceleration.
This particular mode requires compiling ffmpeg with a modified
header (or possibly the CUDA 8 RC) and is not upstream in ffmpeg
yet.
Usage:
You will need to specify vo=opengl and hwdec=cuda.
Note that hwdec=auto will probably not work as it will try to use
vdpau first.
mpv --hwdec=cuda --vo=opengl foobar.mp4
If you want to use filters that require frames in system memory,
just use the decoder directly without the hwdec, as documented
above.
