this migrates our current swift code to version 5 and 4. building is
support from 10.12.6 and xcode 9.1 onwards.
dynamic linking is the new default, since Apple removed static libs
from their new toolchains and it's the recommended way.
additionally the found macOS SDK version is printed since it's an
important information for finding possible errors now.
Fixes#6470
this is in preparation for the upcoming swift 5 transition, where static
linking was replaced by dynamic linking the swift libraries as the
preferred way, by Apple. furthermore Apple removed the static swift libs
from their dev Tools starting with xcode 10.2/swift 5.
because of ABI incompatibility dynamic linking for swift versions prior
to 5 doesn't use the system lib path for the dynamic swift libs.
for now static linking is still the default, but that will be changed
when swift 5 support is added and swift 3 support is dropped.
Fixes#6232
the xcode-select tool only properly works with Apple provided toolchains
but not with third party ones from swift.org. in the latter case the
swift compiler executable is found in the proper path but the swift libs
from the xcode or command line tools will be picked. this leads to a
not wanted discrepancy of the swift compiler and libs and possible
errors.
instead of relying on the xcode-select tool search for the libs relative
to the swift executable. that relative path seems to be the same for all
toolchains. if for any reasons a swift executable is not found in the
relative path, fall back to the old xcode-select method.
furthermore, both static and dynamic libs will be searched for but only
the former will be used for now. this is a preparation for the upcoming
swift 5 migration.
We saw a segfault when trying to use the intel-media-driver (iHD)
rather than the normal intel va driver. This happened because the
iHD driver reports P010 (and maybe other formats) with multiple
layers to represent the interleaved UV plane. The normal va driver
reports one UV layer to match the plane.
This threw off my logic which assumed that the number of layers
could not exceed the number of planes.
There's a way one could fix this in a fully generalised form, but
I'm just going to do what the EGL path does and assume that:
* Layer 'n' is on Plane 'n' for n < total number of planes
* These layers always start at offset 0 on the plane
You can imagine ways that these assumptions are violated, but at
least the failure will look the same for both EGL and Vulkan
paths.
Today, we normally see a format error when probing because yuyv422
cannot be used, but it's in the normal set of probed formats.
This error is distracting and confusing, so only log probing errors
at the VERBOSE level.
Fixes#6411
This change introduces a vulkan interop path for the vaapi hwdec.
The basic principles are mostly the same as for EGL, with the
exported dma_buf being imported by Vukan. The biggest difference
is that we cannot reuse the texture as we do with OpenGL - there's
no way to rebind a VkImage to a different piece of memory, as far
as I can see. So, a new texture is created on each map call.
I did not bother implementing a code path for the old libva API as
I think it's safe to assume any system with a working vulkan driver
will have access to a newer libva.
Note that we are using separate layers for the vaapi surface, just
as is done for EGL. This is because libplacebo doesn't support
multiplane images.
This change does not include format negotiation because no driver
implements the vk_ext_image_drm_format_modifier extension that
would be required to do that. In practice, the two formats we care
about (nv12, p010) work correctly, so we are not blocked. A separate
change had to be made in libplacebo to filter out non-fatal validation
errors related to surface sizes due to the lack of format negotiation.
New releases of VDPAU support decoding 4:4:4 content, and that comes
back as NV24 when using 'direct mode' in OpenGL Interop. That means we
need to be a little bit smarter about how we set up the OpenGL
textures.
If the compositor sends a configure event before the surface is initially
mapped, resize gets called before the egl_window gets created, resulting
in a crash in wl_egl_window_resize.
This was fixed back in 618361c697, but was reintroduced when the wayland
code was rewritten in 68f9ee7e0b.
While `ra` supports the concept of a texture as a storage
destination, it does not support the concept of a texture format
being usable for a storage texture. This can lead to us attempting
to create a texture from an incompatible format, with undefined
results.
So, let's introduce an explicit format flag for storage and use
it. In `ra_pl` we can simply reflect the `storable` flag. For
GL and D3D, we'll need to write some new code to do the compatibility
checks. I'm not going to do it here because it's not a regression;
we were already implicitly assuming all formats were storable.
Fixes#6657
Obvious mistake. This reported 44 bytes more data than what was
available. Could cause out of bounds reads. Security researchers would
claim a major victory if they found something like this in more popular
software, and would create a website for it.
Support for Ada and Objective-C was removed from MSYS2, which made
pacman refuse to update GCC while the gcc-ada and gcc-objc packages were
installed. Remove those packages before updating the others. Also remove
ANGLE, which has been removed from MSYS2, and add libplacebo, which is
now needed for the Vulkan VO.
This started as a desperate attempt to lower the memory requirement
of error diffusion, but later it turns out that this change also
improved the rendering performance a lot (by 40% as I tested).
Errors was stored in three uint before this change, each with 24bit
precision. This change encoded them into a single uint, each with 8bit
precision. This reduced the shared memory usage, as well as number of
atomic operations, all by three times.
Before this change, with the minimum required 32kb shared memory, only
the `simple` kernel can be used to render 1080p video, which is mostly
useless compare to `--dither=fruit`. After this change, 32kb can
handle `burkes` kernel for 1080p, or `sierra-lite` for 4K resolution.
error diffusion requires two texture rendering pass. The existing code
reuses `screen_tex` and creates another for such purpose. This works
generally well for opengl, but could potentially be problematic for
vulkan, due to its async natural.
This is a straightforward parallel implementation of error diffusion
algorithms in compute shader. Basically we use single work group with
maximal possible size to process the whole image. After a shift
mapping we are able to process all pixels column by column.
A large ring buffer are allocated in shared memory to speed things up.
However the size of required shared memory depends linearly on the
height of video window (or screen height in fullscreen mode). In case
there is no enough shared memory, it will fallback to `--dither=fruit`.
The maximal allowed work group size is hardcoded as 1024. Ideally we
could query `GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS`. But for whatever
reason, it seems most high end card from nvidia and amd support only
the minimal required value, so I guess we can stick to it for now.
When the D3D11 backend was first written, SPIRV-Cross only had a C++ API
and no guarantee of API or ABI stability, so instead of using
SPIRV-Cross directly, mpv used an unofficial C wrapper called crossc.
Now that KhronosGroup/SPIRV-Cross#611 is resolved, SPIRV-Cross has an
official C API that can be used instead, so remove crossc and use
SPIRV-Cross directly.
The calculation of scale factor involves 32-bit float, and a strict
equality test will effectively ignore `--scaler-resizes-only` option
for some non-integer scale factor.
Fix this by using non-strict equality check.
since the none native fs is a special legacy case it needs a special
quit routine. it indefinitely waited for an exit fs screen event to
shutdown properly, though that event only fires for the native fs.
now we check if we really are using a native fullscreen and if not
shutdown immediately.
Fixes#6704
These were unnecessary for a couple of reasons, but it seems like the
old code went through a lot of effort to avoid duplicating the code to
print a RECT, even though the windowrc gets printed anyway at the end of
the function.
Avoid printing the same windowrc twice by only printing it when it gets
changed (in the w32->current_fs branch.)
I assume (but cannot confirm) that VA-AP-API is in fact a typo, because
most if not all search engine results related to it are from mpv's manual
page.
By changing this to VA-API and clarifying that this requires VA-API support
on a system to use it, we can hopefully make it clear to unsuspecting
Windows users that this is not the filter they're looking for.
Concerns #6690.
This allows to select the drm mode using a string specification. You
can either select the the preferred mode, the mode with the highest
resolution, by specifying WxH[@R] or by its index in the list of modes
as before.
This was implemented by using OPT_STRING_VALIDATE for drm-mode,
instead of OPT_INT. Using a string here also prepares for future
additions to drm-mode that aim to allow specifying a mode by its
resolution.
It is useful when debugging to be able to force atomic off, or as a
workaround if atomic breaks for some user. Legacy modesetting is less
likely to break by virtue of being a less complex API.
The amount of code now present that's specific to Vulkan or OpenGL
has reached the point where we really want to split it out to
avoid a mess of #ifdefs.
At the same time, I'm moving the code to an api neutral location.
Ricardo Constantino
der richter
dudemanguy
Philip Langdale
Chainik
Michael Forney
Philip Langdale
wm4
James Ross-Gowan
Bin Jin
Martin Herkt
Philip Sequeira
Niklas Haas
Nicolas F
Anton Kindestam