I often watch sporting events. On many occasions I get files with the
same filename for each session. For example, for F1 I might have the
following directory structure:
F1/
FP1.mkv
FP2.mkv
FP3.mkv
Qualification.mkv
Race.mkv
Since usually one simply watches one race after the other, I usually
just rsync the new event's files over the old ones, so, for example,
Race.mkv will be replaced from the file for the last event with the file
from the new event.
One problem with this is that I like to use --resume-playback for other
kinds of media, so I have it on by default. That works great for, say, a
movie, but doesn't work so well with this scheme, because you can
trivially forget to pass --no-resume-playback on the command line and
end up 2 hours in, watching spoilers as the race results scroll down the
screen :-)
This patch adds a new option, --resume-playback-check-mtime, which
validates that the file's mtime hasn't changed since the watch_later
configuration was saved. It does this by setting the watch_later
configuration to have the same mtime as the file after it is saved.
Switching back and forth between checking mtime and not checking mtime
works fine, as we only choose whether to compare based on it, but we
update the watch_later configuration mtime regardless of its value.
I have no idea why this still exists, since we have --input-ipc-server.
I think there was something about Windows, but the latter option is
implemented even on Windows.
It sometimes happens that HLS streams freeze because the HTTP server is
not responding for a fragment (or something similar, the exact
circumstances are unknown). The --timeout option didn't affect this,
because it's never set on HLS recursive connections (these download the
fragments, while the main connection likely nothing and just wastes a
TCP socket).
Apply an elaborate hack on top of an existing elaborate hack to somehow
get these options set. Of course this could still break easily, but hey,
it's ffmpeg, it can't not try to fuck you over. I'm so fucking sick of
ffmpeg's API bullshit, especially wrt. HLS.
Of course the change is sort of pointless. For HLS, GET requests should
just aggressively retried (because they're not "streamed", they're just
actual files on a CDN), while normal HTTP connections should probably
not be made this fragile (they could be streamed, i.e. they are backed
by some sort of real time encoder, and block if there is no data yet).
The 1 minute default timeout is too high to save playback if this
happens with HLS.
Vaguely related to #5793.
Until now, we've made FFmpeg use the default network timeout - which is
apparently infinite. I don't know if this was changed at some point,
although it seems likely, as I was sure there was a more useful default.
For most use cases, a smaller timeout is more useful (for example
recording something in the background), so force a timeout of 1 minute.
See: #5793
Until now, each .c file in test/ was built as separate, self-contained
binary. Each binary could be run to execute the tests it contained.
Change this and make them part of the normal mpv binary. Now the tests
have to be invoked via the --unittest option. Do this for two reasons:
- Tests now run within a "properly" initialized mpv instance, so all
services are available.
- Possibly simplifying the situation for future build systems.
The first point is the main motivation. The mpv code is entangled with
mp_log and the option system. It feels like a bad idea to duplicate some
of the initialization of this just so you can call code using them.
I'm also getting rid of cmocka. There wouldn't be any problem to keep it
(it's a perfectly sane set of helpers), but NIH calls. I would have had
to aggregate all tests into a CMUnitTest list, and I don't see how I'd
get different types of entry points easily. Probably easily solvable,
but since we made only pretty basic use of this library, NIH-ing this is
actually easier (I needed a list of tests with custom metadata anyway,
so all what was left was reimplement the assert_* helpers).
Unit tests now don't output anything, and if they fail, they'll simply
crash and leave a message that typically requires inspecting the test
code to figure out what went wrong (and probably editing the test code
to get more information). I even merged the various test functions into
single ones. Sucks, but here you go.
chmap_sel.c is merged into chmap.c, because I didn't see the point of
this being separate. json.c drops the print_message() to go along with
the new silent-by-default idea, also there's a memory leak fix unrelated
to the rest of this commit.
The new code is enabled with --enable-tests (--enable-test goes away).
Due to waf's option parser, --enable-test still works, because it's a
unique prefix to --enable-tests.
The use of glXGetCurrentDisplay() restricted this to the GLX backend.
But actually it works under EGL as well. Removing the GLX-specific call
and using the general mpv-internal method to get the X "Display" makes
it work in mpv.
I didn't know this. Nvidia didn't list this as extension in the EGL
context when I still used their GPUs.
Note that this might in theory break use of vdpau in some libmpv clients
using the render API. But only if MPV_RENDER_PARAM_X11_DISPLAY is not
used, and they relied on mpv using glXGetCurrentDisplay(). EGL does not
provide such an API, and hwdec_vaapi.c also uses what hwdec_vdpau.c uses
now. Considering that vaapi is preferable these days, it's not bad at
all if these clients get "broken". They can be easily fixed by passing
the display to mpv correctly.
(Only half of the buffer is actually used in a useful way, see manpage
or commit which added the option.)
Might have some advantages with broken network filesystem drivers.
See: #6802
In some corner cases (see #6802), it can be beneficial to use a larger
stream buffer size. Use this as argument to rewrite everything for no
reason.
Turn stream.c itself into a ring buffer, with configurable size. The
latter would have been easily achievable with minimal changes, and the
ring buffer is the hard part. There is no reason to have a ring buffer
at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and
some subtle issues with demux_mkv.c wanting to seek back by small
offsets (the latter was handled with small stream_peek() calls, which
are unneeded now).
In addition, this turns small forward seeks into reads (where data is
simply skipped). Before this commit, only stream_skip() did this (which
also mean that stream_skip() simply calls stream_seek() now).
Replace all stream_peek() calls with something else (usually
stream_read_peek()). The function was a problem, because it returned a
pointer to the internal buffer, which is now a ring buffer with
wrapping. The new function just copies the data into a buffer, and in
some cases requires callers to dynamically allocate memory. (The most
common case, demux_lavf.c, required a separate buffer allocation anyway
due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_*
changes.
I'm not happy with this. There still isn't a good reason why there
should be a ring buffer, that is complex, and most of the time just
wastes half of the available memory. Maybe another rewrite soon.
It also contains bugs; you're an alpha tester now.
Not like anyone reads it. Although putting all this text before listing
the allowed option values sort of has the intention to discourage users
from using the option at all. Advertise Ctrl+h, which is a decent way of
enabling hardware decoding temporarily.
The user can raise the number of tolerated hardware decoding errors. On
the other hand, we have a static limit on packets that are "saved" for
fallback handling (and that's a good idea to avoid unbounded memory
usage). In this case, it could happen that the start of a file was fine
after a fallback, but after that buffered amount of data, it would
suddenly skip.
It's more useful to skip buffering entirely if the number of tolerated
decoding errors exceeds the fixed buffer.
(And also, I'm sure nobody gives a shit about this feature.)
The statement about the display FPS is outdated by several years.
"audio"-sync mode does not use the display FPS anymore, and that it's
X11 only also isn't true anymore.
These modes have separate implementations for audio and display video
sync. modes, so the explanations are separate.
Why the hell are users playing around with this anyway? The explanations
are probably too special to make sense for anyone who doesn't know the
code (and who knows the code doesn't need them anyway), but whatever.
This is mostly just because of the odd RGB default gamma issue, which
shouldn't have any real impact. This also sets allow_approximate_gamma,
which I hope is fine for normal use cases.
Raise swscale and zimg default parameters. This restores screenshot
quality settings (maybe) unset in the commit before. Also expose some
more libswscale and zimg options.
Since these options are also used for VOs like x11 and drm, this will
make x11/drm/etc. much slower. For compensation, provide a profile that
sets the old option values: sw-fast. I'm also enabling zimg here, just
as an experiment.
The core problem is that we have a single set of command line options
which control the settings used for most swscale/zimg uses. This was
done in the previous commit. It cannot differentiate between the VOs,
which need to be realtime and may accept/require lower quality options,
and things like screenshots or vo_image, which can be slower, but should
not sacrifice quality by default.
Should this have two sets of options or something similar to do the
right thing depending on the code which calls libswscale? Maybe. Or
should I just ignore the problem, make it someone else's problem (users
who want to use software conversion VOs), provide a sub-optimal
solution, and call it a day? Definitely, sounds good, pushing to master,
goodbye.
By default utilizes the color space of the desktop on which the
swap chain is located. If a specific value is defined, it will be
instead be utilized.
Enables configuration of the PQ color space (BT.2020 primaries,
PQ transfer function) for HDR.
Additionally, signals the swap chain color space to the renderer,
so that the render looks correct without having to specify
target-trc or target-prim manually.
Due to all of the APIs being Win10+ only, will only work starting
with Windows 10.
Enabling this by default probably causes a number of issues, such as
breaking vo_sdl, or reacting to various input devices while the window
is not focused. It's also pretty obscure, or at least new. Disable it by
default.
This doesn't take a ',' separated list. --script is just an alias for
--scripts--append. --scripts accepts a list, but uses the
mplayer-inherited platform-dependent path separator.
Fixes: #5996
Internally, vo_gpu uses NaN for some options to indicate a default value
that is different depending on the context (e.g. different scalers).
There are 2 problems with this:
1. you couldn't reset the options to their defaults
2. NaN is a damn mess and shouldn't be part of the API
The option parser already rejected NaN explicitly, which is why 1.
didn't work. Regarding 2., JSON might be a good example, and actually
caused a bug report.
Fix this by mapping NaN to the special value "default". I think I'd
prefer other mechanisms (maybe just having every scaler expose separate
options?), but for now this will do. See you in a future commit, which
painfully deprecates this and replaces it with something else.
I refrained from using "no" (my favorite magic value for "unset" etc.)
because then I'd have e.g. make --no-scale-param1 work, which in
addition to a lot of effort looks dumb and nobody will use it.
Here's also an apology for the shitty added test script.
Fixes: #6691
The code is very basic:
- only handles gamepads, could be extended for generic joysticks in the
future.
- only has button mappings for controllers natively supported by SDL2.
I heard more can be added through env vars, there's also ways to load
mappings from text files, but I'd rather not go there yet. Common ones
like Dualshock are supported natively.
- analog buttons (TRIGGER and AXIS) are mapped to discrete buttons using an
activation threshold.
- only supports one gamepad at a time. the feature is intented to use
gamepads as evolved remote controls, not play multiplayer games in mpv :)
Awful shit. I probably wouldn't accept this code from someone else, just
so you know.
The idea is that a sws_utils user can automatically use zimg without
large code changes. Basically, laziness. Since zimg support is still
very new, and I don't want that anything breaks just because zimg was
enabled at build time, an option needs to be set to enable it. (I have
especially especially obscure stuff in mind, which is all what
libswscale is used in mpv.)
This _still_ doesn't cause zimg to be used anywhere, because the
sws_utils user has to opt-in by setting allow_zimg. This is because some
users depend on certain libswscale features.
This provides a very similar API to sws_utils.h, which can be used to
convert and scale from one mp_image to another.
This commit adds only the code, but does not use it anywhere.
The code is quite preliminary and barely tested. It supports only a few
pixel formats, and will return failure for many others. (Unlike
libswscale, which tries to support anything that FFmpeg knows.)
zimg itself accepts only planar formats. Supporting other formats
requires manual packing/unpacking. (Compared to libswscale, the zimg API
is generally lower level, but allows for more flexibility.) Only BGR0
output was actually tested. It appears to work.
On a audio/video desync by more than 0.5 seconds, display-sync mode was
disabled, and not enabled again (until playback restart, e.g. a seek).
The idea was that it this only happens when this playback mode is broken
and can't perform well anyway (A/V desync is a clear indication that
something is very wrong). Instead of behaving like a god damn POS, it
should revert to the more robust audio-sync mode.
Unfortunately, this could happen sporadically due to temporary system
performance problems, such as toggling fullscreen. Users didn't like
this, and asked for a function to disable it, or to recover in some
other way.
This mechanism is questionable anyway. If an ignorant user enables
display-sync, and encounters problems with it (without being able to
determine that display-sync is messing up), the player will still behave
like a POS on every playback, and even after every seek. It might
actually be helpful to fail more consistently. Also, I've found that
it's sill relatively reliable anyway even without this mechanism.
So just remove the fallback.
Fixes: #7048
OK, so --cache-secs is useless, because the default is set to 10 hours.
And that part about the "maximum" was obviously a lie (I wonder if it
simply changed at some point).
Query information on the system output most linked to the swap chain,
and either utilize a user-configured format, or either 8bit
RGBA or 10bit RGB with 2bit alpha depending on the system output's
bit depth.
In this case, gapless will most likely not work. It will result in (very
slight) desync, or (more commonly with small buffer sizes), in an
underflow.
I think it would be legitimate to disable gapless at end of playback
completely if video is enabled at all. But this would need an exception
for cover art mode, so I guess the current solution is OK as well.
The justification for this is the fact that the `video-aspect` property
doesn't work well with `cycle_values` commands that include the value
"-1".
The "video-aspect" property has effectively no change in behavior, but
we may want to make it read-only in the future. I think it's probably
fine to leave as-is, though.
Fixes#6068.
libass had an API to configure this since 2013. mpv always used
ASS_FONTPROVIDER_AUTODETECT, because usually there's little reason to
use anything else. The intention of the now added option is to allow
users to disable use of system fonts.
I didn't consider it worth the trouble to add the coretext and
directwrite enum items from ASS_DefaultFontProvider. The "auto" choice
will have the same effect if they're available. Also, the part of the
code which defines the option does not necessarily have libass available
(it's still optional!), so defining all enum items as choices is icky. I
still added fontconfig, since that may be nice to emulate a nostalgic
2010 feeling of mpv freezing on fontconfig.
The option for OSD is even less useful. (But you get it for free, and
why pass up a chance to add yet another useless option?)
This is not quite what was requested in #6947, but as close as it gets.
We default to EGL instead of GLX now, which means vdpau only works
if we explicitly specify that we want a GLX context, as vdpau lacks
interop for EGL.
Update the hwdec documentation to reflect this.
Concerns #6980.
wm4
Chris Down
dudemanguy
Jan Ekström
Stefano Pigozzi
Niklas Haas
Oliver Freyermuth
Anton Kindestam
Wessel Dankers
der richter
Nicolas F
wnoun