This deliberately wasn't being done when mpv was embedded
(fbccddb48b). There are some applications
that would benefit from mpv setting a title since they don't do so
themselves (such as tabbed), but at the same time some others would
probably rather not have this behavior (like smplayer). Add an option
that allows an embedded mpv to set the title if the user wishes.
Fixes#11528.
The OSC reports the speed-adjusted remaining time, but the terminal does
not. This is a weird mismatch and the OSC's default behavior makes
sense, so let's just do some division and add an option to disable it.
Also named "remaining-playtime" after the OSC option. Fixes#10445.
mpv makes this option an integer, but the underlying ass API actually
accepts doubles. From some testing, there is no meaningful precision
difference between float or double (it seems to go in roughly 0.05
steps), so just make it a float. sd_lavc also can handle non-integer
values here. Closes#11583.
1669c4698d notably flipped the default of
--subs-with-matching-audio from yes to no as part of a series of changes
that gave more control over sub selection behavior. While the increased
amount of options is definitely nice, changing the default to no results
in very unintuitive behavior. For example, setting alang=en and slang=en
in your config will not show any subtitles since the audio stream is
English as well so --subs-with-matching-audio being no causes the subs
to not be be selected. This is very weird for users who reasonably
expect slang being set to actually result in showing subs and this is
what mpv did for the past decade.
The other case is when a subtitle does not have a language tag but is
flagged as default. Because --subs-fallback (a new option), defaults to
no, these subtitles also will not be loaded. This is also strange for
users since mpv previously loaded these and they would need to change
the value of this option. It's also inconsistent because audio tracks
that are tagged as default are also loaded by default.
The new behavior seems to have mostly just confused users, and it also
regresses their configs for unclear reasons. Let's just set the options
to be back in line with the old behavior with is what most users expect.
--subs-with-matching-audio goes back to being yes and the new option
--subs-fallback should be default. Fixes#11854.
Directories were always loaded recursively, which can be slow
(e.g. one of the subdirectories is a mounting point to a slow device)
and can unexpectedly expand into a massive playlist.
Due to the problems described in 503dada42f,
this defaults to recursive loading.
ref. https://github.com/mpv-player/mpv/issues/9652
Add an option for allowing pointer events to pass through the mpv
window. This could be useful in cases where a user wants to display
transparent images/video with mpv and interact with applications beneath
the window. This commit implements this functionality for x11 and
wayland. Note that whether or not this actually works likely depends on
your window manager and/or compositor. E.g. sway ignores pointer events
but the entire window becomes draggable when you float it (nothing under
the mpv window receives events). Weston behaves as expected however so
that is a compositor bug. Excuse the couple of completely unrelated
style fixes (both were originally done by me).
the reason for these casts are unknown but they were presumably to
silence warnings 9 years ago. but it doesn't seem to be necessary
nowadays, so just drop the casts and also drop the `const` from the
compound literal type.
some small technical notes:
1. while string literals aren't `const` in C, writing to them is
undefined (do not ask me why). and so compilers will typically put
string literals into read only section anyways, regardless of
weather `const` was used in the source or not. so this shouldn't make
any difference codegen wise.
2. making the array of pointers `const` on the other hand might affect
codegen, eg: `(char *const []){...}`. however, that'd trigger a lot
of discarded qualifier warnings.
shorter and more robust this way instead of inserting at an index by
manually counting.
the surrounding code also uses `[STREAM_*] = ..` so it's more consistent
as well.
Some platforms (wayland) apparently have a lot of trouble with drag and
drop. The default behavior is still the same which is basically obeying
what we get from the window manager/compositor, but the --drag-and-drop
option allows forcibly overriding the drag and drop behavior. i.e. you
can force it to always replace the playlist or append at the end. This
only implements this in X11 and Wayland but in theory windows and macos
could find this option useful (both hardcode the shift key for
appending). Patches welcome.
Since meson has its own unit testing system, let's rework mpv's tests so
they integrate nicely with this. To prepare for this, start off by
dropping the unittest option. Of course, this means that tests will no
longer be supported in the waf build at all but it will be dropped
anyway. Note that the tests option is preserved for the meson build. We
will still make use of this in the future commits.
mpv's window resizing logic always automatically resized the window
whenever the video resolution changed (i.e. advancing forward in a
playlist). This simply introduces the option to make this behavior
configurable. Every windowing backend would need to implement this
behavior in their code since a reconfigure event must always be a
resize. The params of the frame changed so you either have to resize the
window to the new size of the params or make the params the same size as
the window. This commit implements it for wayland, win32, and x11.
c784820454 introduced a bool option type
as a replacement for the flag type, but didn't actually transition and
remove the flag type because it would have been too much mundane work.
A longstanding pain point of the drm VOs is the relative lack of state
sharing. While drm_common does provide some sharing, it's far less than
other platforms like x11 or wayland. What we do here is essentially copy
them by creating a new vo_drm_state struct and using it in vo_drm and
context_drm_egl. Much of the functionality that was essentially
duplicated in both VOs/contexts is now reduced simple functions in
drm_common. The usage of the term 'kms' was also mostly eliminated since
this is libdrm nowadays from a userspace perspective.
The watch-later mechanism has always unconditionally wrote start to
files to save the playback position. When this was later expanded to
watch-later-options, this logic was kept in place. But we don't actually
have to unconditionally write this and can allow users to remove the
option from the list if they want to. The start value still requires
some special handling; it should always be written if possible
regardless of the value changing. However, we can just place it within
the default set of options for watch-later-options so it can be removed
like any other.
So far there was no way to sync video to display and have audio sync to
video without changes in pitch.
With this option the audio does not get resampled (pitch change) and
instead the corrected audio speed is applied to audio filters.
The content-type protocol allows mpv to send compositor a hint about the
type of content being displayed on its surface so it could potentially
make some sort of optimization. Fundamentally, this is pretty simple but
since this requires a very new wayland-protocols version (1.27), we have
to mess with the build to add a new define and add a bunch of if's in
here. The protocol itself exposes 4 different types of content: none,
photo, video, and game.
To do that, let's add a new option (wayland-content-type) that lets
users control what hint to send to the compossitor. Since the previous
commit adds a VOCTRL that notifies us about the content being displayed,
we can also add an auto value to this option. As you'd expect, the
compositor hint would be set to photo if mpv's core detects an image,
video for other things, and it is set to none for the special case of
forcing a window when there is not a video track. For completion's sake,
game is also allowed as a value for this option, but in practice there
shouldn't be a reason to use that.
mpv has an internal optimization on a couple of platforms where it will
not render any frames if the window is minimized or hidden. There's at
least once possible use case for wanting to force a render anyway
(screensharing with pipeware) so let's just add a simple switch for
this that always forces mpv to render. Closes#10846.
With the recent addition of the libxpresent, it should improve frame
timings for most users. However, there were known cases of bad behavior
(Nvidia) which lead to a construction of a whitelist instead of just
enabling this all the time. Since there's no way to predict whatever
combination of hardware/drivers/etc. may work correctly, just give users
an option to switch the usage of xorg's presentation statistics on/off.
The default value, auto, works like before (basically, Mesa drivers and
no Nvidia are allowed), but now one can force it on/off if needed.
Now that a separate --cover-art-whitelist option exists, files like
cover.jpg are loaded even without setting --cover-art-auto to fuzzy, so
only load files that have exactly the media filename by default, since
fuzzy loading is probably more likely to load unwanted images than to
load cover art that the user intended to display, especially if you play
audio files with a short filename like a.mp3.
This allows more fine grained control over which cover art to load. With
--cover-art-auto=exact and --cover-art-whitelist=yes, you can now load
cover art with the exact media filename and the whitelisted filenames,
but not cover art that contains the media filename
(--cover-art-auto=fuzzy).
The video sync logic for mpv lies completely within its core at
essentially the highest layer of abstraction. The problem with this is
that it is impossible for VOs to know what video sync mode mpv is
currently using since it has no access to the opts. Because different
video sync modes completely changes how mpv's render loop operates, it's
reasonable that a VO may want to change how it renders based on the
current mode (see the next commit for an example).
Let's just move the video sync option to mp_vo_opts. MPContext, of
course, can still access the value of the option so it only requires
minor changes in player/video.c. Additionally, move the VS_IS_DISP
define from to player/core.h to common/common.h. All VOs already have
access to common/common.h, and there's no need for them to gain access
to everything that's in player/core.h.
The stop-screensaver option is currently limited to a simple yes/no
option. While the no option does always disable mpv trying to stop the
screensaver, yes does not mean the screensaver is always stopped. The
screensaver will be enabled again depending on certain conditions (like
if the player is paused). Simply introduce a new value for this option,
always, which does exactly what the name implies: the screensaver will
always be disabled.
This reverts commit 04f0b0abe4.
It's not a good idea to unify the names only for visibility, while
keeping secondary-* for everything else.
This needs a bit more thought before we allow secondary sub to be
visible on its own.
Adds --sub-visibility choices 'primary-only' for only displaying the
primary subtitle track, and 'secondary-only' for only displaying
secondary subtitle track.
Removes --secondary-sub-visibility and displays a message telling the
user to use --sub-visibility=yes/primary-only instead.
These changes make it so that the default 'sub-visibility' bind 'v'
cycles through all the 'sub-visibility' choices, 'no', 'yes',
'primary-only', and 'secondary-only'.
Using --sub-filter-regex-plain (default:no)
The ass-to-plaintext functionality already existed at sd_ass.c, but
it's internal and uses a private buffer type, so a trivial utility
wrapper was added with standard char*/bstr interface.
The plaintext can be multi-line, and the multi-line regexp flag is now
always set, but only affects plaintext (the ASS source is one line).
Pretty much identical to filter-regex but with JS expressions and
requires only JS support. Shares the filter-regex-* control options.
The target audience is Windows users - where filter-regex doesn't
work due to missing APIs, but mujs builds cleanly on Windows, and JS
is usually enabled in 3rd party Windows mpv builds.
Lua could have been used with similar effort, however, the JS regex
syntax is more extensive and also much more similar to POSIX.
Let audio-display determine whether embedded images or external cover
art tracks should be selected when both are present.
Attached pictures are given priority by default as requested in #8539.
Also updates references to attached pictures in the log and manpage to
refer to cover art as well.
Closes#8539.
This allows configuring which options are saved by quit-watch-later.
Fixes#4126, #4641 and #5567.
Toggling a video or audio filter twice would treat the option as changed
because the backup value is NULL, and the current value of vf/af is a
list with one empty item, so obj_settings_list_equal had to be changed.
Not sure what I was on when I wrote this. wayland-app-id is supposed to
default to "mpv". Just set that in the vo_sub_opts and don't do this
weird m_config_cache_write_opt thing. Also make the doc entry nicer.
This fixes a long-standing apparent issue where mpv would display the last
frame with no subtitles at EOF. This is caused by sub rendering switching from
video timestamps to audio timestamps when the video ends, and audio streams
often running past the timestamp of the last video frame. However, authoring
tools (most notably Aegisub) don't tend to provide easy ways to add meaningful
subtitles after the end of the video, so this is rarely actually useful.
This makes cover-art-auto behave more like sub-auto and audio-file-auto:
- load cover art with a language, e.g. if playing foo.mp3, foo.en.jpg
will be loaded with lang=en
- load cover art containing the media filename with fuzzy and all, e.g.
'foo (large).jpg'
- make all/2 load all images in the directory, and make fuzzy/1 the
default
These are all uncommon use cases, but synchronizing the behavior of the
external file options simplifies the code.
This is the Vulkan equivalent of the drm context for OpenGL, with
the big difference that it's implemented purely in terms of Vulkan
calls and doesn't actually require drm or kms.
The basic idea is to identify a display, mode, and plane on a device,
and then create a display backed surface for the swapchain. In theory,
past that point, everything is the same, and this is in fact the case
on Intel hardware. I can get a video playing on a vt.
On nvidia, naturally, things don't work that way. Instead, nvidia only
implemented the extension for scenarios where a VR application is
stealing a display from a running window system, and not for
standalone scenarios. With additional code, I've got this scenario to
work but that's a separate incremental change.
Other people have tested on AMD, and report roughly the same behaviour
as on Intel.
Note, that in this change, the VT will not be correctly restored after
qutting. The only way to restore the VT is to introduce some drm
specific code which I will illustrate in a separate change.
The accurate description of this option was:
- fit-border is enabled by default. When disabled, it adds a bug where
if the window has borders and mpv shrinks it to fit the desktop, then
the calculation ignores the borders and adds incorrect video crop.
The option was added at commits 70f64f3c and 949247d6, in order to
solve an issue (#2935) where if mpv wanted to display a video with
size WxH, then w32_common.c incorrectly set the window to WxH, while
down-scaling the video slightly to fit (even with small sizes).
It was addressed with a new option which is enabled by default, but
does the right thing (sets the client area to WxH) only when disabled,
so that everyone who prefers their video slightly downscaled could
keep their default behavior.
(#2935 also addressed an off-by-one issue, fixed before fit-border)
While disabling the option did avoid unnecessary downscaling, it also
added a bug when disabled: the borders are no longer taken into
account when the size is too big for the desktop. Most users don't
notice and are unaffected as it's enabled by default.
Shortly later (981048e0) the core issue is fixed, and now the client
area is correctly set to WxH instead of the window (and together with
the three following commits which center the video, adds a new bug
where the window title can be outside the display - addressed next).
However, fit-border remained, now without any effect, except that it
still has the same bug when disabled and the window is too big.
Later code changes and refactoring preserved this issue with great
attention to details, and it remained in identical form until now.
Simply rip out fit-border.
Simple groundwork for adding a couple of user options that allow
selecting the screen with a string name. The next two commits implements
these options for xorg and wayland.
This reverts commit 3d17e19c2c.
The effect of turning off this setting is that mpv doesn't tell libass what
the video stream's resolution is. This happens to result in some files having
their transforms scaled in ways that give higher performance (as described
in #7435) because libass happened to guess a video resolution that resulted
in transforms yielding smaller bitmaps, but it's just as easy for the opposite
to happen depending on the resolutions and effects involved.
The option's name is also somewhat misleading: setting the storage size affects
blur, but it also affects stroke (which is far more important for the vast
majority of scripts) and 3D transforms (which look very screwy when done wrong).
Dudemanguy
Christoph Heinrich
NRK
rcombs
Oliver Freyermuth
Guido Cella
Avi Halachmi (:avih)
Ripose
Niklas Haas
Philip Langdale
Zsolt Vadasz
Your Name
wm4