Add an infrastructure for collecting performance-related data, use it in
some places. Add rendering of them to stats.lua.
There were two main goals: minimal impact on the normal code and normal
playback. So all these stats_* function calls either happen only during
initialization, or return immediately if no stats collection is going
on. That's why it does this lazily adding of stats entries etc. (a first
iteration made each stats entry an API thing, instead of just a single
stats_ctx, but I thought that was getting too intrusive in the "normal"
code, even if everything gets worse inside of stats.c).
You could get most of this information from various profilers (including
the extremely primitive --dump-stats thing in mpv), but this makes it
easier to see the most important information at once (at least in
theory), partially because we know best about the context of various
things.
Not very happy with this. It's all pretty primitive and dumb. At this
point I just wanted to get over with it, without necessarily having to
revisit it later, but with having my stupid statistics.
Somehow the code feels terrible. There are a lot of meh decisions in
there that could be better or worse (but mostly could be better), and it
just sucks but it's also trivial and uninteresting and does the job. I
guess I hate programming. It's so tedious and the result is always shit.
Anyway, enjoy.
If the user manages to run a "loadfile x append" command before the loop
in mp_play_files() is entered, then the player could start playing
these. This isn't expected, because appending files to the playlist in
idle mode does not normally start playback. It could happen because
there is a short time window where commands are processed before the
loop is entered (such as running the command when a script is loaded).
The idle mode semantics are pretty weird: if files were provided in
advance (on the command line), then these should be played immediately.
But if idle mode was already entered, and something is appended to the
playlist using "append", i.e. without explicitly triggering playback,
then it should remain in idle mode.
Try to follow this by redefining PT_STOP to strictly mean idle mode.
Remove the playlist->current check from idle_loop(), since only the
stop_play field counts now (cf. what mp_set_playlist_entry() does).
This actually introduces the possibility that playlist->current, and
with it playlist-pos, are set to something, even though playback is not
active or being started. Previously, this was only possible during state
transitions, such as when changing playlist entries.
Very annoyingly, this means the current way MPV_EVENT_IDLE was sent
doesn't work anymore. Logically, idle mode can be "active" even if
idle_loop() was not entered yet (between the time after mp_initialize()
and before the loop in mp_play_files()). Instead of worrying about this,
redo the "idle-active" property, and deprecate the event.
See: #7543
What was this even for? Also, most times, the cleared status line will
show up as an empty new line anyway, so this commit reduces the empty
new lines from 2 to 1.
Using mpv without libass isn't really supported, since it's not only
used to display ASS subtitles, but all text subtitles, and even OSD.
At least 1 user complained that the player printed a warning if built
without libass. Avoid trying to create the impression that using this
software without libass is in any way supported or desirable, and make
it fully mandatory.
(As far as making dependencies optional goes, I'd rather make ffmpeg
optional, which is an oversized and bloated library, rather than
something tiny like libass.)
Instead of having f_decoder_wrapper create its own copy of the entire
mpv option tree, create a struct local to that file and move all used
options to there.
movie_aspect is used by the "video-aspect" deprecated property code. I
think it's probably better not to remove the property yet, but
fortunately it's easy to work around without needing special handling
for this option or so.
correct_pts is used to prevent use of hr-seek in playloop.c. Ignore
that, if you use --no-correct-pts you're asking for trouble anyway. This
is the only behavior change.
It's ridiculous that --script=something.dumb does not cause an error.
Make it error, and extend this behavior to the scripts/ sub-dir in the
mpv config dir.
Although a linked list was ideal at first, there are cases where it
sucks, and became increasingly awkward (with the mpv command API
preferring integer indexes to access the list). In future, we probably
want to add more playlist-related functionality, so better change it to
an array now.
An array isn't always ideal either. Since playlist entries are still
separate objects (because in some cases you need a stable "iterator" to
it), but you still need to efficiently get the next/previous playlist
entry, there's a pl_index field, that needs to be maintained. E.g.
adding an entry at the start of the playlist => update the pl_index
field for all other entries. Well, it's not really worth to do something
more complicated to avoid these things.
This commit is probably buggy as shit. It's not like I bothered to test
everything. That's _your_ role.
Instead of making m_config a special-case, it more or less uses the
underlying m_config_cache/m_config_shadow APIs properly. This makes the
player core a (relatively) equivalent user of the core option API. In
particular, this means that other threads can change core options with
m_config_cache_write_opt() calls (before this commit, this merely led to
diverging option values).
An important change is that before this commit, mpctx->opts contained
the "master copy" of all option data. Now it's just another copy of the
option data, and the shadow copy is considered the master. This is why
whenever mpctx->opts is written, the change needs to be copied to the
master (thus why this commits add a bunch of m_config_notify... calls).
If another thread (e.g. a VO) changes an option, async_change_cb is now
invoked, which funnels the change notification through the player's
layers.
The new self_notification parameter on mp_option_change_callback is so
that m_config_notify... doesn't trigger recursion, and it's used in
cases where the change was already "processed". It's still needed to
trigger libmpv property updates. (I considered using an extra
m_config_cache for that, but it'd only cause problems with no
advantages.)
I think the recent changes actually forgot to send libmpv property
updates in some cases. This should fix this anyway. In some cases,
property updates are reworked, and the potential for bugs should be
lower (probably).
The primary point of this change is to allow external updates, for
example by a VO writing the fullscreen option if the window state is
changed by the window manager (rather than mpv changing it). This is not
used yet, but the following commits will.
Just an implementation detail that can be cleaned up now. Internally,
m_config maintains a tree of m_sub_options structs, except for the root
it was not defined explicitly. GLOBAL_CONFIG was a hack to get access to
it anyway. Define it explicitly instead.
The previous bunch of commits made this unnecessary, so this should be
a purely internal change with no user impact.
This may or may not open the way to future improvements. Even if not,
at least the property/option interaction should now be much less buggy.
As preparation for making repl.lua part of the core (maybe), add some
mechanisms which are supposed to improve its behavior.
Add a silent mode. Calling mpv_request_log_messages() with the log level
name prefixed with "silent:" will disable logging from the API user's
perspective. But it will keep the log buffer, and record new messages,
without returning them to the user. If logging is enabled again by
requesting the same log level without "silent:" prefix, the buffered log
messages are returned to the user at once. This is not documented,
because it's far too messy and special as that I'd want anyone to rely
on this behavior, but it will be perfectly fine for an internal script.
Another thing is that we record early startup messages. The goal is to
make the repl.lua script show option and config parsing file errors.
This works only with the special "terminal-default" log level.
In addition, reduce the "terminal-default" capacity to only 100 log
messages. If this is going to be enabled by default, it shouldn't use
too much resources.
Until now, each .c file in test/ was built as separate, self-contained
binary. Each binary could be run to execute the tests it contained.
Change this and make them part of the normal mpv binary. Now the tests
have to be invoked via the --unittest option. Do this for two reasons:
- Tests now run within a "properly" initialized mpv instance, so all
services are available.
- Possibly simplifying the situation for future build systems.
The first point is the main motivation. The mpv code is entangled with
mp_log and the option system. It feels like a bad idea to duplicate some
of the initialization of this just so you can call code using them.
I'm also getting rid of cmocka. There wouldn't be any problem to keep it
(it's a perfectly sane set of helpers), but NIH calls. I would have had
to aggregate all tests into a CMUnitTest list, and I don't see how I'd
get different types of entry points easily. Probably easily solvable,
but since we made only pretty basic use of this library, NIH-ing this is
actually easier (I needed a list of tests with custom metadata anyway,
so all what was left was reimplement the assert_* helpers).
Unit tests now don't output anything, and if they fail, they'll simply
crash and leave a message that typically requires inspecting the test
code to figure out what went wrong (and probably editing the test code
to get more information). I even merged the various test functions into
single ones. Sucks, but here you go.
chmap_sel.c is merged into chmap.c, because I didn't see the point of
this being separate. json.c drops the print_message() to go along with
the new silent-by-default idea, also there's a memory leak fix unrelated
to the rest of this commit.
The new code is enabled with --enable-tests (--enable-test goes away).
Due to waf's option parser, --enable-test still works, because it's a
unique prefix to --enable-tests.
mpv warned if the FFmpeg runtime library version was not exactly the
same as the build version. This seemed to cause frequent conflicts. At
this point, most mpv code probably adheres to the FFmpeg ABI rules, and
FFmpeg stopped breaking ABI "accidentally". Another source of problems
were mixed FFmpeg/Libav installations, something which nobody does
anymore. It's not "our" job to check and enforce ABI compatibility
either. So I guess this behavior can be removed.
OK, still check for incompatible libraries (according to FFmpeg
versioning rules), i.e. different major versions, or if the build
version is newer than the runtime version. For now.
The comment about ABI problems is still true. In particular, the
bytes_read field mentioned in the removed comment is still accessed, and
is still an ABI violation. Have fun.
The description of the "playback_only" field in the "subprocess" command
says "you can't start it outside of playback". This did not work
correctly: if the player was started in idle mode in the first place,
the subprocess was allowed to run even with playback_only=yes.
This is a bug, and this change fixes it. Add a test for this to
command-test.lua.
For #7025.
That's just a single one. It used to be more, when FFmpeg still required
using pointless accessors for tons of fields, which historically broke
compatibility with Libav. (I think I wrote the patch to deprecate that
crap and to allow direct access myself.)
There may be more exceptions, but I forgot about them. Another point is
that we don't really trust FFmpeg ABI stability, though.
A previous commit changed m_config so that it always creates the shadow
thing, and the function's only remaining purpose was to initialize
mpv_global. It makes much more sense to do that at the caller, and it's
only 1 line of code too.
See manpage additions. This is a huge hack. You can bet there are shit
tons of bugs. It's literally forcing square pegs into round holes.
Hopefully, the manpage wall of text makes it clear enough that the whole
shit can easily crash and burn. (Although it shouldn't literally crash.
That would be a bug. It possibly _could_ start a fire by entering some
sort of endless loop, not a literal one, just something where it tries
to do work without making progress.)
(Some obvious bugs I simply ignored for this initial version, but
there's a number of potential bugs I can't even imagine. Normal playback
should remain completely unaffected, though.)
How this works is also described in the manpage. Basically, we demux in
reverse, then we decode in reverse, then we render in reverse.
The decoding part is the simplest: just reorder the decoder output. This
weirdly integrates with the timeline/ordered chapter code, which also
has special requirements on feeding the packets to the decoder in a
non-straightforward way (it doesn't conflict, although a bugmessmass
breaks correct slicing of segments, so EDL/ordered chapter playback is
broken in backward direction).
Backward demuxing is pretty involved. In theory, it could be much
easier: simply iterating the usual demuxer output backward. But this
just doesn't fit into our code, so there's a cthulhu nightmare of shit.
To be specific, each stream (audio, video) is reversed separately. At
least this means we can do backward playback within cached content (for
example, you could play backwards in a live stream; on that note, it
disables prefetching, which would lead to losing new live video, but
this could be avoided).
The fuckmess also meant that I didn't bother trying to support
subtitles. Subtitles are a problem because they're "sparse" streams.
They need to be "passively" demuxed: you don't try to read a subtitle
packet, you demux audio and video, and then look whether there was a
subtitle packet. This means to get subtitles for a time range, you need
to know that you demuxed video and audio over this range, which becomes
pretty messy when you demux audio and video backwards separately.
Backward display is the most weird (and potentially buggy) part. To
avoid that we need to touch a LOT of timing code, we negate all
timestamps. The basic idea is that due to the navigation, all
comparisons and subtractions of timestamps keep working, and you don't
need to touch every single of them to "reverse" them.
E.g.:
bool before = pts_a < pts_b;
would need to be:
bool before = forward
? pts_a < pts_b
: pts_a > pts_b;
or:
bool before = pts_a * dir < pts_b * dir;
or if you, as it's implemented now, just do this after decoding:
pts_a *= dir;
pts_b *= dir;
and then in the normal timing/renderer code:
bool before = pts_a < pts_b;
Consequently, we don't need many changes in the latter code. But some
assumptions inhererently true for forward playback may have been broken
anyway. What is mainly needed is fixing places where values are passed
between positive and negative "domains". For example, seeking and
timestamp user display always uses positive timestamps. The main mess is
that it's not obvious which domain a given variable should or does use.
Well, in my tests with a single file, it suddenly started to work when I
did this. I'm honestly surprised that it did, and that I didn't have to
change a single line in the timing code past decoder (just something
minor to make external/cached text subtitles display). I committed it
immediately while avoiding thinking about it. But there really likely
are subtle problems of all sorts.
As far as I'm aware, gstreamer also supports backward playback. When I
looked at this years ago, I couldn't find a way to actually try this,
and I didn't revisit it now. Back then I also read talk slides from the
person who implemented it, and I'm not sure if and which ideas I might
have taken from it. It's possible that the timestamp reversal is
inspired by it, but I didn't check. (I think it claimed that it could
avoid large changes by changing a sign?)
VapourSynth has some sort of reverse function, which provides a backward
view on a video. The function itself is trivial to implement, as
VapourSynth aims to provide random access to video by frame numbers (so
you just request decreasing frame numbers). From what I remember, it
wasn't exactly fluid, but it worked. It's implemented by creating an
index, and seeking to the target on demand, and a bunch of caching. mpv
could use it, but it would either require using VapourSynth as demuxer
and decoder for everything, or replacing the current file every time
something is supposed to be played backwards.
FFmpeg's libavfilter has reversal filters for audio and video. These
require buffering the entire media data of the file, and don't really
fit into mpv's architecture. It could be used by playing a libavfilter
graph that also demuxes, but that's like VapourSynth but worse.
This was always a legacy thing. Remove it by applying an orgy of
mp_get_config_group() calls, and sometimes m_config_cache_alloc() or
mp_read_option_raw().
win32 changes untested.
The path functions need to access the option that forces non-default
config directories. Just add it as a field to mpv_global - it seems
justified. The accessed options were always enforced as immutable after
init, so there's not much of a change.
Until now, stopping playback aborted the demuxer and I/O layer violently
by signaling mp_cancel (bound to libavformat's AVIOInterruptCB
mechanism). Change it to try closing them gracefully.
The main purpose is to silence those libavformat errors that happen when
you request termination. Most of libavformat barely cares about the
termination mechanism (AVIOInterruptCB), and essentially it's like the
network connection is abruptly severed, or file I/O suddenly returns I/O
errors. There were issues with dumb TLS warnings, parsers complaining
about incomplete data, and some special protocols that require server
communication to gracefully disconnect.
We still want to abort it forcefully if it refuses to terminate on its
own, so a timeout is required. Users can set the timeout to 0, which
should give them the old behavior.
This also removes the old mechanism that treats certain commands (like
"quit") specially, and tries to terminate the demuxers even if the core
is currently frozen. This is for situations where the core synchronized
to the demuxer or stream layer while network is unresponsive. This in
turn can only happen due to the "program" or "cache-size" properties in
the current code (see one of the previous commits). Also, the old
mechanism doesn't fit particularly well with the new one. We wouldn't
want to abort playback immediately on a "quit" command - the new code is
all about giving it a chance to end it gracefully. We'd need some sort
of watchdog thread or something equally complicated to handle this. So
just remove it.
The change in osd.c is to prevent that it clears the status line while
waiting for termination. The normal status line code doesn't output
anything useful at this point, and the code path taken clears it, both
of which is an annoying behavior change, so just let it show the old
one.
Before this, mpctx->playing was often used to determine whether certain
new state could be added to the playback state. In particular this
affected external files (which added tracks and demuxers). The variable
was checked to prevent that they were added before the corresponding
uninit code. We want to make a small part of uninit asynchronous, but
mpctx->playing needs to stay in the place where it is. It can't be used
for this purpose anymore.
Use mpctx->stop_play instead. Make it never have the value 0 outside of
loading/playback. On unloading, it obviously has to be non-0.
Change some other code in playloop.c to use this, because it seems
slightly more correct. But mostly this is preparation for the following
commit.
It seems a bit inappropriate to have dumped this into stream.c, even if
it's roughly speaking its main user. At least it made its way somewhat
unfortunately to other components not related to the stream or demuxer
layer at all.
I'm too greedy to give this weird helper its own file, so dump it into
thread_tools.c.
Probably a somewhat pointless change.
Many asynchronous commands are potentially long running operations, such
as loading something from network or running a foreign process.
Obviously it shouldn't just be possible for them to freeze the player if
they don't terminate as expected. Also, there will be situations where
you want to explicitly stop some of those operations explicitly. So add
an infrastructure for this.
Commands have to support this explicitly. The next commit uses this to
actually add support to a command.
If a struct as large as MPContext contains a field named "lock", it
creates the impression that it is the primary lock for MPContext. This
is wrong, the lock just protects a single field.
This enables two types of command behavior:
1. Plain async behavior, like "loadfile" not completing until the file
is fully loaded.
2. Running parts of the command on worker threads, e.g. for I/O, such as
"sub-add" doing network accesses on a thread while the core
continues.
Both have no implementation yet, and most new code is actually inactive.
The plan is to implement a number of useful cases in the following
commits.
The most tricky part is handling internal keybindings (input.conf) and
the multi-command feature (concatenating commands with ";"). It requires
a bunch of roundabout code to make it do the expected thing in
combination with async commands.
There is the question how commands should be handled that come in at a
higher rate than what can be handled by the core. Currently, it will
simply queue up input.conf commands as long as memory lasts. The client
API is limited by the size of the reply queue per client. For commands
which require a worker thread, the thread pool is limited to 30 threads,
and then will queue up work in memory. The number is completely
arbitrary.
The main change is that we wait with opening the muxer ("writing
headers") until we have data from all streams. This fixes race
conditions at init due to broken assumptions in the old code.
This also changes a lot of other stuff. I found and fixed a few API
violations (often things for which better mechanisms were invented, and
the old ones are not valid anymore). I try to get away from the public
mutex and shared fields in encode_lavc_context. For now it's still
needed for some timestamp-related fields, but most are gone. It also
removes some bad code duplication between audio and video paths.
This changes how mpv_terminate_destroy() and mpv_detach_destroy()
behave. The doxygen in client.h tries to point out the differences. The
goal is to make this more useful to the API user (making it behave like
refcounting).
This will be refined in follow up commits.
Initialization is unfortunately closely tied to termination, so that
changes as well. This also removes earlier hacks that make sure that
some parts of FFmpeg initialization are run in the playback thread
(instead of the user's thread). This does not matter with standard
FFmpeg, and I have no reason to care about this anymore.
The intention is to reduce annoying differences between mpv CLI and
libmpv, and there's no reason to have the locale check only in libmpv
(although it doesn't help with any real issues either).
The purpose of the new API is to make it useable with other APIs than
OpenGL, especially D3D11 and vulkan. In theory it's now possible to
support other vo_gpu backends, as well as backends that don't use the
vo_gpu code at all.
This also aims to get rid of the dumb mpv_get_sub_api() function. The
life cycle of the new mpv_render_context is a bit different from
mpv_opengl_cb_context, and you explicitly create/destroy the new
context, instead of calling init/uninit on an object returned by
mpv_get_sub_api().
In other to make the render API generic, it's annoyingly EGL style, and
requires you to pass in API-specific objects to generic functions. This
is to avoid explicit objects like the internal ra API has, because that
sounds more complicated and annoying for an API that's supposed to never
change.
The opengl_cb API will continue to exist for a bit longer, but
internally there are already a few tradeoffs, like reduced
thread-safety.
Mostly untested. Seems to work fine with mpc-qt.
Use the decoder wrapper that was introduced for video. This removes all
code duplication the old audio decoder wrapper had with the video code.
(The audio wrapper was copy pasted from the video one over a decade ago,
and has been kept in sync ever since by the power of copy&paste. Since
the original copy&paste was possibly done by someone who did not answer
to the LGPL relicensing, this should also remove all doubts about
whether any of this code is left, since we now completely remove any
code that could possibly have been based on it.)
There is some complication with spdif handling, and a minor behavior
change (it will restrict the list of codecs to spdif if spdif is to be
used), but there should not be any difference in practice.
Move dec_video.c to filters/f_decoder_wrapper.c. It essentially becomes
a source filter. vd.h mostly disappears, because mp_filter takes care of
the dataflow, but its remains are in struct mp_decoder_fns.
One goal is to simplify dataflow by letting the filter framework handle
it (or more accurately, using its conventions). One result is that the
decode calls disappear from video.c, because we simply connect the
decoder wrapper and the filter chain with mp_pin_connect().
Another goal is to eventually remove the code duplication between the
audio and video paths for this. This commit prepares for this by trying
to make f_decoder_wrapper.c extensible, so it can be used for audio as
well later.
Decoder framedropping changes a bit. It doesn't seem to be worse than
before, and it's an obscure feature, so I'm content with its new state.
Some special code that was apparently meant to avoid dropping too many
frames in a row is removed, though.
I'm not sure how the source code tree should be organized. For one,
video/decode/vd_lavc.c is the only file in its directory, which is a bit
annoying.
Now macosx_menubar.m and mpv.rc (win32) use the same copyright string.
(This is a bit roundabout, because mpv.rc can't use C constants. Also
the C code wants to avoid rebuilding real source files if only version.h
changed, so only version.c includes version.h.)
