Until now, this was for AC3 only. For PCM, we used AudioUnit in
ao_coreaudio, and the only reason ao_coreaudio_exclusive exists
is that there is no other way to passthrough AC3.
PCM support is actually rather simple. The most complicated
issue is that modern OS X versions actually do not support
copying through the data; instead everything must go through
float. So we have to deal with virtual and physical format
being different, which causes some complications.
This possibly also doesn't support some other things correctly.
For one, if the device allows non-interleaved output only, we
will probably fail. (I couldn't test it, so I don't even know
what is required. Supporting it would probably be rather
simple, and we already do it with AudioUnit.)
This is basically a hack for drivers which prevent the mpv DXVA2 decoder
glue from working if OpenGL is in fullscreen mode.
Since it doesn't add any "hard" new API to the client API, some of the
code would be required for a true zero-copy hw decoding pipeline, and
sine it isn't too much code after all, this is probably acceptable.
This should make interpolation work much better in general, although
there still might be some side effects for unusual framerates (eg. 35 Hz
or 48 Hz). Most of the common framerates are tested and working fine.
(24 Hz, 30 Hz, 60 Hz)
The new code doesn't have support for oversample yet, so it's been
removed (and will most likely be reimplemented in a cleaner way if
there's enough demand). I would recommend using something like robidoux
or mitchell instead of oversample, though - they're much
smoother for the common cases.
At least Matroska files have a "forced" flag (in addition to the
"default" flag). Export this flag. Treat it almost like the default
flag, but with slightly higher priority.
We want to distinguish actual errors, and just aborting the program
intentionally.
Also be a bit more careful with handling the wait() exit status: do not
called WEXITSTATUS() without checking WIFEXITED() first.
DVD/BD menu support never worked right, and are a pain to maintain. In
particular, DVD menus never actually worked correctly, because
highlights were not rendered correctly. Fixing this requires major
effort, which I'm not interested to spend.
Most importantly, the requirement to switch streams without losing the
DVD/BD state caused major weirdness in the playback core. It was
implemented by somehow syncing the playback state to the DVD/BD
implementation (in stream_dvdnav.c etc.), and then reloading the demuxer
without destroying and recreating the stream. This caused a bunch of
special-cases which I'm looking forward to remove.
For now, don't just remove everything related to menu support and just
disable it. If someone volunteers, it can be restored (i.e. rewritten)
in a reasonable way. If nobody volunteers soon, it goes.
Client API users can enable log output with mpv_request_log_messages().
But you can enable only a single log level. This is normally enough, but
the --msg-level option (which controls the terminal log level) provides
more flexibility. Due to internal complexity, it would be hard to
provide the same flexibility for each client API handle. But there's a
simple way to achieve basically the same thing: add an option that sends
log messages to the API handle, which would also be printed to the
terminal as by --msg-level.
The only change is that we don't disable this logic if the terminal is
disabled. Instead we check for this before the message is output, which
in theory can lower performance if messages are being spammed. It could
be handled with some more effort, but the gain would be negligible.
So successful playback and user quit can be distinguished, for whatever
reason you may want to do this.
Normally, the "quit" command can be customized, but this does not work
for quit commands sent by the terminal signal handler. One solution
would be introducing something like "ON_SIGNAL" (equivalent to
"CLOSE_WIN"), but considering there are a bunch of possible signals, I'd
rather not get into this. So go with the dumb solution.
Probably fixes#2029.
This provides a new method for enabling spdif passthrough. The old
method via --ad (--ad=spdif:ac3 etc.) is deprecated. The deprecated
method will probably stop working at some point.
This also supports PCM fallback. One caveat is that it will lose at
least 1 audio packet in doing so. (I don't care enough to prevent this.)
(This is named after the old S/PDIF connector, because it uses the same
underlying technology as far as the higher level protoco is concerned.
Also, the user should be renamed that passthrough is backwards.)
The "osd" command cycles between 4 states (OSD level 0-3), which is
probably confusing and inconvenient. OSD levels 0 and 2 are rarely
needed. I would claim there is normally not much of a need to completely
disable OSD by setting level 0 during playback. Level 2 is just slightly
less information than level 3, and I'm not sure why it exists at all.
Change it so that it toggles between level 3 and 1. Note that this
ignores the default OSD level. If the default is 3, the first use of
this key will set it to 3 again. Just assume 1 is the default. If
someone complains, this could be improved.
It polluted the global namespace, instead of exporting the function
properly.
For now, keep it compatible by explicitly keeping the bogus export.
Also fix a mistake in the manpage example.
This command has been deprecated in the 0.8.x and 0.9.x releases - get
rid of it. Its only point ever was MPlayer compatibility, which broke
years ago anyway.
They're completely orthogonal concepts, merged in the past due to
convenience and ease of implementing it in the old #ifdef hell renderer.
Especially after the CMS stuff was generalized by 634b4a, this was a
trivial change to implement and also means color management will be much
higher quality when enabled with vo=opengl (which had quantization
issues in the past due to the 8 bit FBO format and upscaling), since it
can be done in a single pass now.
Wnile it seems quite logical to me that commands use _ as word
separator, while properties use -, I can't really explain the
difference, and it tends to confuse users as well. So always
prefer - as separator for everything.
Using _ still works, and will probably forever. Not doing so would
probably create too much chaos and confusion.
Also replace their implementation with the recently introduced
properties. One significant difference is that audio-channels using OSD
formatting does not print the channel layout. The user can just use the
replacement property instead.
This brings the volume control closer to what is percepted as linear
volume change.
Adjust the --softvol-max default to roughly the old maximum (roughly
doubles the gain).
Now --volume takes an absolute volume, meaning it doesn't depend on
--softvol-max. 0 is still silence, and 100 now always means unchanged
volume. The OSD and the "volume" property are changed accordingly.
Also raise the minimum value of --softvol-max. A value below 100 makes
no sense and breaks the OSD.
Only absolute percentage seeking was permitted first. It is now also
possible to seek by relative percentage.
MPSEEK_FACTOR is used as seek_type.
Fixes#1950.
Signed-off-by: wm4 <wm4@nowhere>
Instead of having separate backends, make use of GLES a flag. This
reduces the number of backends and the resulting annoyances.
Also, nobody cares about using GLES, so there's no backward
compatibility either.
(I have no idea why there are different modes.)
Instead of risking to drop frames too early, give it some margin. Since
there are situations this could deadlock, wait with a timeout. This can
happen if e.g. the API user is refusing to render anything, or if
uninitialization is happening.
OpenSSL and GnuTLS are still causing this problem (although FFmpeg could
be blamed as well - but not really). In particular, it was happening to
libmpv users and in cases the pseudo-gui profile is used. This was
because all signal handling is in the terminal code, so if terminal is
disabled, it won't be set. This was obviously a questionable shortcut.
Avoid further problems by always blocking the signal. This is done even
for libmpv, despite our policy of not messing with global state.
Explicitly document this in the libmpv docs. It turns out that a version
bump to 1.17 was forgotten for the addition of MPV_FORMAT_BYTE_ARRAY, so
document that change as part of 1.16.
This creates the window before the first file is loaded. This was
requested a bunch of times, but on the other hand a change to make this
behavior the default was reverted some time ago, because other users
hated it.
Reduces (but likely does not remove) the danger of rounding intermediate
values down to 8 bit. This is important for cscale, or any other
processing that might store raw YUV values in framebuffers.
Fixes#1918.
ao_coreaudio uses AudioUnit - the OSX software mixer. In theory, it
supports multichannel audio just fine. But in practice, this might be
disabled by default, and the user is supposed to select a multichannel
base format in the "Audio MIDI Setup" utility.
This option attempts to change this setting automatically. Some possible
disadvantages and caveats are listed in the manpage additions. It is off
by default, since changing this might be rather bad behavior for a
normal application.
Since commit 7381db60, strings like "~desktop/" were expanded as
platform-specific paths by mpv. Apparently this similarity to standard
Unix shell expansion caused confusion, so change it to "~~desktop/". The
shell doesn't expand this, so it should be better.
This now stores caches for multiple ICC profiles, potentially all the
user has ever used. The big use case for this is for users with multiple
monitors. The old logic would mandate recomputing the LUT and discarding
the cache whenever dragging mpv from one screen to another.
This also avoids having to save and check the ICC profile itself, since
the file name already uniquely determines it.
This should take care of the endless complaints about the default
location for screenshots (and will of course create new ones).
If the screenshot-template is set to an absolute path, the directory
won't be used. So this should be reasonably compatible.
So that the user realizes where they come from, or can find them at all.
This was a common complaint, and this is the most lazy solution. Better
suggestions for a default template are welcome.
win32 has a special function for this.
I'm not sure about OSX - it seems ~/Desktop can be hardcoded, and the
OSX GUI actually localizes the _displayed_ path in its UI.
For Unix, there is not much to be done, or is there.
Now the rescan_external_files command will by default reselect the audio
and subtitle streams. This should be more intuitive.
Client API users and Lua scripts might break, but can be fixed in a
backward-compatible way by setting the mode explicitly.
