r23530 breaks policy: notification was not sent to mailing list,
agreements of other devs were not received.
Code also should be reviewed/cleaned up/fixed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23593 b3059339-0415-0410-9bf9-f77b7e298cf2
When -loop is used as a per-file option it seeks back to the start of
the file from the end and tries to reset options to their original
values. This reset is not implemented properly: it simply sets the
option variables back without running any of the associated control
code. Implementing the option reset functionality properly would be a
significant amount of work and there is no clear need for it, so I'm
simply removing the broken version.
None of this affects the use of -loop as a global option. That case has
a separate implementation which always starts a new file from scratch
with default option values.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23567 b3059339-0415-0410-9bf9-f77b7e298cf2
modified patch from Otvos Attila oattila at chello dot hu
Module uses zvbi library for all low-level VBI operations (like I/O with vbi
device, converting vbi pages into usefull vbi_page stuctures, rendering them
into RGB32 images).
All teletext related stuff (except properties, slave commands and rendering
osd in text mode or RGB32 rendered teletext pages in spu mode) is implemented
in tvi_vbi.c
New properties:
teletext_page - switching between pages
teletext_mode - switch between on/off/opaque/transparent modes
teletext_format - (currently read-only) allows to get format info
(black/white,gray,text)
teletext_half_page - trivial zooming (displaying top/bottom half of teletext
page)
New slave commands:
teletext_add_dec - user interface for jumping to any page by editing page number
interactively
teletext_go_link - goes though links, specified on current page
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23530 b3059339-0415-0410-9bf9-f77b7e298cf2
allows to bind one input key to several slave commands (independently for each section)
as shown below:
RIGHT seek +10
RIGHT {tv} tv_step_channel 1
RIGHT {dvdnav} dvdnav 4
Currenlty only "tv" section added.
patch by Otvos Attila oattila at chello dot hu
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23497 b3059339-0415-0410-9bf9-f77b7e298cf2
Add missing '\n' to "pts value <= previous", change level to INFO
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@23312 b3059339-0415-0410-9bf9-f77b7e298cf2
"implicit declaration of function ‘mplayer_put_key’" warnings
Based on Attila's suggestions.
Approved by Uoti and Ivan.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22841 b3059339-0415-0410-9bf9-f77b7e298cf2
as long as there are enough pts values for frames that the decoder
returns.
This should allow passing NAL units individually.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22516 b3059339-0415-0410-9bf9-f77b7e298cf2
The value is related to overall a/v sync and is not used by audio
demuxers or decoders.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22506 b3059339-0415-0410-9bf9-f77b7e298cf2
Manual seeks no longer shift -endpos position (hopefully no one
considered that a "feature").
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22356 b3059339-0415-0410-9bf9-f77b7e298cf2
Previously it affected every later seek (even in other files).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22319 b3059339-0415-0410-9bf9-f77b7e298cf2
Move some global and static variables under a struct that can be given
as a parameter. Add a context argument to the property functions so that
they do not have to depend on global/static variables.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
by the demuxer is smaller. Should improve a bit problems with non-selectable
DVD/VOB subtitles.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22252 b3059339-0415-0410-9bf9-f77b7e298cf2
in non-ASS mode. The latter is common (old sub replaced by new) and
resulted in an incorrect frame where both appeared simultaneously.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22162 b3059339-0415-0410-9bf9-f77b7e298cf2
and adding and removing of lines in subtitle struct into subreader.c.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21845 b3059339-0415-0410-9bf9-f77b7e298cf2
USE_OSD was hardcoded to true in configure, manually turning it off
would break compilation, and most OSD-related code wasn't affected by it
anyway so it did nothing useful.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21177 b3059339-0415-0410-9bf9-f77b7e298cf2
USE_SUB was hardcoded to true in configure, manually turning it off
would break compilation, and there's no apparent reason why having all
subtitle code under #ifdefs (even working ones) would be worth the
clutter.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21156 b3059339-0415-0410-9bf9-f77b7e298cf2
which caused timing of DVD subtitles to be ignored so that they were
shown as soon as they were demuxed rather than in their timed position.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21071 b3059339-0415-0410-9bf9-f77b7e298cf2
build_afilter_chain() which can alter the value.
(Though I'm not sure whether the current limits in build_afilter_chain
are necessary or correct.)
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21028 b3059339-0415-0410-9bf9-f77b7e298cf2
Carl Eugen Hoyos [cehoyos -at- rainbow studorg tuwien ac at]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@21018 b3059339-0415-0410-9bf9-f77b7e298cf2
(cehoyos [at] rainbow studorg tuwien ac at) with small modifications
by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20989 b3059339-0415-0410-9bf9-f77b7e298cf2
Patch by Carl Eugen Hoyos [cehoyos <at> ag or at] with modifications by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20931 b3059339-0415-0410-9bf9-f77b7e298cf2
Having a look at the gcc output before committing is a good idea btw.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20920 b3059339-0415-0410-9bf9-f77b7e298cf2
The most visible inaccuracy caused by the previous update location was
that the OSD always showed position 0 after seeking with demux_mkv.
Split frame decoding and filtering because with -correct-pts the pts
value that should be displayed for the frame is only known after
decoding but is needed before filtering (during which the OSD is drawn).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20918 b3059339-0415-0410-9bf9-f77b7e298cf2
Fixes some problems with playback_speed!=1: sleep limits which were
supposed to be real time were calculated in scaled time, timing
inaccuracies in nosound mode affected next frame by
err*(1-1/playback_speed), auto quality code used scaled time.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20915 b3059339-0415-0410-9bf9-f77b7e298cf2
If the shown frame was already at exactly the end pos we don't want to
show one more frame after it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20911 b3059339-0415-0410-9bf9-f77b7e298cf2
This code was apparently intended to duplicate frames in constant-
framerate output in case of skipped input frames, but the test used
(blit_frame not set at that location) is not correct for that use.
If removing this code turns out to make the brokenness of other code
more apparent then a better fix might be needed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@20908 b3059339-0415-0410-9bf9-f77b7e298cf2
