Increase the default queue size. This helps with "missed" frames due to
the asynchronous nature of the API. All the other VOs are synchronous,
so if rendering and displaying takes a while, the common code in vo.c
will be blocked until it can continue. But with opengl-cb, vo.c might
immediately push the next ready frame, which causes the current frame
to be dropped _if_ it wasn't rendered yet.
One could fix this by making vo.c wait a while (until the API user calls
the render function, which pulls the frame). But setting the default
queue size to 2 seems much simpler: instead of dropping the frame, it
will be pushed to the API user once the next renderer call finishes.
(This is still a bit strange, and will hopefully be cleaned up when
video scheduling is redone, but for now this appears to deliver
relatively good results.)
This matters for png screenshots. We used to hardcode rgb24, but
libavformat's png encoder can do much more. Use the image format list
provided by the encoder, and select the best format from it (according
to the source format).
As a consequence, rgb48 (i.e. 16 bit per component) will be selected if
the source format is e.g. 10 bit yuv. This happens in accordance to
FFmpeg's avcodec_find_best_pix_fmt_of_list() function, which assumes
that 16 bit rgb should be preferred for 10 bit yuv.
This also causes it to print this message in this case:
[ffmpeg] swscaler: full chroma interpolation for destination format 'rgb48be' not yet implemented
I'm not 100% sure whether this is a problem.
Use texture-from-pixmap instead of vaapi's "native" GLX support.
Apparently the latter is unused by other projects. Possibly it's broken
due that, and Intel's inability to provide anything non-broken in
relation to video.
The new code basically uses the X11 output method on a in-memory pixmap,
and maps this pixmap as texture using standard GLX mechanisms. This
requires a lot of X11 and GLX boilerplate, so the code grows. (I don't
know why libva's GLX interop doesn't just do the same under the hood,
instead of bothering the world with their broken/unmaintained "old"
method, whatever it did. I suspect that Intel programmers are just
genuine sadists.)
This change was suggested in issue #1765.
The old GLX support is removed, as it's redundant and broken anyway.
One remaining issue is that the first vaPutSurface() call fails with an
unknown error. It returns -1, which is pretty strange, because vaapi
error codes are normally positive. It happened with the old GLX code
too, but does not happen with vo_vaapi. I couldn't find out why.
This is a peculiar filter I stumbled upon while playing around with
windows, it removes aliasing almost completely while not ringing at all.
The downside is that it's quite blurry, but at high resolutions it's not
so noticeable.
This merges all of the scaler-related options into a single
configuration struct, and also cleans up the way they're passed through
the code. (For example, the scaler index is no longer threaded through
pass_sample, just the scaler configuration itself, and there's no longer
duplication of the params etc.)
In addition, this commit makes scale-down more principled, and turns it
into a scaler in its own right - so there's no longer an ugly separation
between scale and scale-down in the code.
Finally, the radius stuff has been made more proper - filters always
have a radius now (there's no more radius -1), and get a new .resizable
attribute instead for when it's tunable.
User-visible changes:
1. scale-down has been renamed dscale and now has its own set of config
options (dscale-param1, dscale-radius) etc., instead of reusing
scale-param1 (which was arguably a bug).
2. The default radius is no longer fixed at 3, but instead uses that
filter's preferred radius by default. (Scalers with a default radius
other than 3 include sinc, gaussian, box and triangle)
3. scale-radius etc. now goes down to 0.5, rather than 1.0. 0.5 is the
smallest radius that theoretically makes sense, and indeed it's used
by at least one filter (nearest).
Apart from that, it should just be internal changes only.
Note that this sets up for the refactor discussed in #1720, which would
be to merge scaler and window configurations (include parameters etc.)
into a single, simplified string. In the code, this would now basically
just mean getting rid of all the OPT_FLOATRANGE etc. lines related to
scalers and replacing them by a single function that parses a string and
updates the struct scaler_config as appropriate.
This makes the core much more elegant, reusable, reconfigurable and also
allows us to more easily add aliases for specific configurations.
Furthermore, this lets us apply a generic blur factor / window function
to arbitrary filters, so we can finally "mix and match" in order to
fine-tune windowing functions.
A few notes are in order:
1. The current system for configuring scalers is ugly and rapidly
getting unwieldy. I modified the man page to make it a bit more
bearable, but long-term we have to do something about it; especially
since..
2. There's currently no way to affect the blur factor or parameters of
the window functions themselves. For example, I can't actually
fine-tune the kaiser window's param1, since there's simply no way to
do so in the current API - even though filter_kernels.c supports it
just fine!
3. This removes some lesser used filters (especially those which are
purely window functions to begin with). If anybody asks, you can get
eg. the old behavior of scale=hanning by using
scale=box:scale-window=hanning:scale-radius=1 (and yes, the result is
just as terrible as that sounds - which is why nobody should have
been using them in the first place).
4. This changes the semantics of the "triangle" scaler slightly - it now
has an arbitrary radius. This can possibly produce weird results for
people who were previously using scale-down=triangle, especially if
in combination with scale-radius (for the usual upscaling). The
correct fix for this is to use scale-down=bilinear_slow instead,
which is an alias for triangle at radius 1.
In regards to the last point, in future I want to make it so that
filters have a filter-specific "preferred radius" (for the ones that
are arbitrarily tunable), once the configuration system for filters has
been redesigned (in particular in a way that will let us separate scale
and scale-down cleanly). That way, "triangle" can simply have the
preferred radius of 1 by default, while still being tunable. (Rather
than the default radius being hard-coded to 3 always)
Use OPT_CHOICE_C() instead of the custom parser. The functionality is
pretty much equivalent.
(On a side note, it seems --video-stereo-mode can't be removed, because
it controls whether to "reduce" stereo video to mono, which is also the
default. In fact I'm not sure how this should be handled at all.)
Rarely used and essentially useless. The only VO for which this was
implemented correctly and for which this did anything was vo_xv, but you
shouldn't use vo_xv anyway (plus it support BT.601 only, plus a vendor
specific extension for BT.709, whose presence this function essentially
reported - use xvinfo instead).
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
It was "by design" possible to make mpv crash if the parameters didn't
make enough sense, like "format=rgb24:yuv420p". While forcing the format
has some minor (rather questionable) use for debugging, allowing it to
crash is just stupid.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
Currently, the code just skipped CMS completely. This commit treats them
as sRGB by default, instead.
This also refactors much of the color management code to make it more
generalized and re-usable.
This is a minor precaution, because in some cases the number of shader
programs can already hit 10. (chroma merging + separated cscale/scale +
+ sub blending (interpolated) + sub blending (non-interpolated)
+ output (interpolated) + output (non-interpolated) + OSD)
This has a number of user-visible changes:
1. A new flag blend-subtitles (default on for opengl-hq) to control this
behavior.
2. The OSD itself will not be color managed or affected by
gamma controls. To get subtitle CMS/gamma, blend-subtitles must be
used.
3. When enabled, this will make subtitles be cleanly interpolated by
:interpolation, and also dithered etc. (just like the normal output).
Signed-off-by: wm4 <wm4@nowhere>
Bilinear scaling is not a suitable default for something named "hq"; the
whole reason this was done in the past was because cscale used to be
obscenely slow. This is no longer the case, with cscale being nearly
free.
Handling this perfectly with VapourSynth is probably not possible: you
either need to tell it the total number of input frames in advance, or
deliver an infinite stream. With playback, EOF can happen at an
unpredictable point, for which the VapourSynth API has no mechanism at
all. We handle EOF by returning an error to the filter, which will the
filter return all pending frame callbacks.
We still can try to handle it approximately: if the filter requests a
frame past EOF, then send it an error. This seems to work relatively
well with filters which don't request future frames.
With the previous commit, we have no need anymore to check a part of an
extension string (for ignoring a prefix). So check the extension string
properly, instead of just using the broken old strstr() method, which
could accidentally ignore prefixes or suffixes. Do this by extending
the check to whether the extension name is properly delimited by spaces
or string start/end.
Instead of somehow looking for the substring "_swap_control" and trying
to several arbitrary function names, do it cleanly. The old approach has
the problem that it's not very exact, and may even load a pointer to a
function which doesn't exist. (Some GL implementations like Mesa return
function pointers even the functions which don't exist, and calling them
crashes.)
I couldn't find any evidence that glXSwapInterval, wglSwapIntervalSGI,
or wglSwapInterval actually exist, so don't include them. They were
carried over from MPlayer times.
To make diagnostics easier, print a warning in verbose mode if the
function could not be loaded.
Drop support for GL_EXT_framebuffer_object. It has 2 problems: semantics
might be slightly different from the "proper" GL_ARB_framebuffer_object
extension (but is likely completely untested), and also our extension
loader is too dumb to load the same group of function pointers
represented by different extensions only once.
When not receiving frame callbacks, we should not draw anything to avoid
blocking the OpenGL renderer. We do this by extending gl context api, by
introducing new optional function 'is_active', that indicates whether
OpenGL renderers should draw or not.
This fixes issue #249.
Define frame callback logic in wayland_common.c
As this should be used by opengl renderer as well.
Preferably drawing should be skipped entierly when no frame callbacks
are received. However, for now only swap buffers is skipped.
Like FFmpeg/Libav do. It seems not all code can actually deal with this
situation, so it's better to shift the special-cases to code which needs
it (possibly OSD code; screenshots of 0x0 windows would just fail).
