There are claims that nnedi3.c doesn't constitute its own new
implementation, but is derived from existing HLSL or OpenCL shaders
distributed under the LGPLv3 license.
Until these are resolved, do the "correct" thing and require
--enable-gpl3 to build nnedi.
This loaded external .ass files via libass. libavformat's .ass reader is
now good enough, so use that instead.
Apparently libavformat still doesn't support fonts embedded into text
.ass files, but support for this has been accidentally broken in mpv for
a while anyway. (And only 1 person complained.)
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
matplotlib is pathetically slow, which makes using stats-conv.py to view
dumps longer than a few seconds a huge pain.
pyqtgraph is slightly faster than matplotlib. Other than that, it seems
to be worse in every aspect (at least for plotting), but such is life.
This reverts commit d11184a256.
Unfortunately, there was a lot of unexpected resistance.
Do note that this is still extremely slow, crappy, etc.
Note that vo_x11.c was further edited. Compared to the removed vo_x11.c,
an additional ~200 lines of code was removed in order to simplify it. I
tried to strip it down as much as possible. In particular, support for
odd non-32 bit formats (24, 16, 15, 8 bit) is dropped.
Closes#2300.
This AVPacket field was a hack against the fact that the duration field
was merely an int (too small for things like subtitle durations). Newer
libavcodec drops this field and makes duration 64 bit.
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
There are at least 2 ways of using VAAPI without X11 (Wayland, DRM).
Remove the X11 requirement from the decoder part and the EGL interop.
This will be used by a following commit, which adds Wayland support.
The worst about this is the decoder part, which includes a bad hack for
using the decoder without any VO interop (also known as "vaapi-copy"
mode). Separate the X11 parts so that they're self-contained. For the
EGL interop code we do something similar (it's kept slightly simpler,
because it essentially only has to translate between our silly
MPGetNativeDisplay abstraction and the vaGetDisplay...() call).
It looks like my hope that we can unconditionally include EGL headers in
the OpenGL code is not coming true, because OSX does not support EGL at
all. So I prefer loading the VAAPI EGL/GL specific extensions manually,
because it's less of a mess. Partially reverts commit d47dff3f.
Make the GPU memcpy from the dxva2 code generally useful to other parts
of the player.
We need to check at configure time whether SSE intrinsics work at all.
(At least in this form, they won't work on clang, for example. It also
won't work on non-x86.)
Introduce a mp_image_copy_gpu(), and make the dxva2 code use it. Do some
awkward stuff to share the existing code used by mp_image_copy(). I'm
hoping that FFmpeg will sooner or later provide a function like this, so
we can remove most of this again. (There is a patch, bit it's stuck in
limbo since forever.)
All this is used by the following commit.
Should work much better than the old GLX interop code. Requires Mesa 11,
and explicitly selecting the X11 EGL backend with:
--vo=opengl:backend=x11egl
Should it turn out that the new interop works well, we will try to
autodetect EGL by default.
This code still uses some bad assumptions, like expecting surfaces to be
in NV12. (This is probably ok, because virtually all HW will use this
format. But we should at least check this on init or so, instead of
failing to render an image if our assumption doesn't hold up.)
This repo was a lot of help: https://github.com/gbeauchesne/ffvademo
The kodi code was also helpful (the magic FourCC it uses for
EGL_LINUX_DRM_FOURCC_EXT are nowhere documented, and
EGL_IMAGE_INTERNAL_FORMAT_EXT as used in ffvademo does
not actually exist).
(This is the 3rd VAAPI GL interop that was implemented in this player.)
These extensions use a bunch of EGL types, so we need to include the EGL
headers in common.h to use our GL function loader with this.
In the future, we should probably require presence of the EGL headers to
reduce the hacks. This might be not so simple at least with OSX, so for
now this has to do.
This was in sub/, because the code used to be specific to subtitles. It
was extended to automatically load external audio files too, and moving
the file and renaming it was long overdue.
I see no point in keeping these around. Keeping wrappers for some select
libavfilter filters just because MPlayer had these filters is not a good
reason.
Ultimately, all real filtering work should go to libavfilter, and users
should get used to using vf_lavfi directly. We might even not require
the awful double-nested syntax for using libavfilter one day.
vf_rotate, vf_yadif, vf_stereo3d are kept because mpv uses them
internally. (They all extend the lavfi filters or change their
defaults.) vf_mirror is kept for symmetry with vf_flip. vf_gradfun and
vf_pullup are probably semi-popular, so I'll remove them not yet - only
after some more discussion.
These were normalized and are saner now. We want to use the new fields,
and also get rid of the deprecation warnings, so use them. There's no
release yet which uses these, so some ifdeffery is unfortunately needed.
Some users still use this filter, so the filter was going to be kept.
But I overlooked that libavfilter provides this filter. Remove the
redundant wrapper from mpv. Something like --af=lavfi=bs2b should work
and give exactly the same results.
All of these filters are considered not useful anymore by us. Some have
replacements in libavfilter (useable through af_lavfi).
af_center, af_extrastereo, af_karaoke, af_sinesuppress, af_sub,
af_surround, af_sweep: pretty simple and useless filters which probably
nobody ever wants.
af_ladspa: has a replacement in libavfilter.
af_hrtf: the algorithm doesn't work properly on most sources, and the
implementation was buggy and complicated. (The filter was inherited from
MPlayer; but even in mpv times we had to apply fixes that fixed major
issues with added noise.) There is a ladspa filter if you still want to
use it.
af_export: I'm not even sure what this is supposed to do. Possibly it
was meant for GUIs rendering audio visualizations, but it couldn't
really work well. For example, the size of the audio depended on the
samplerate (fixed number of samples only), and it couldn't retrieve the
complete audio, only fragments. If this is really needed for GUIs, mpv
should add native visualization, or a proper API for it.
Fixes regression in dfd8a5f that made autoload not add more files
at the end of the current playlist if playlist was made by the
script.
This still prevents loading the script if more than one (media or
playlist) file was manually added.
This works similar to the existing .rar support, but uses libarchive.
libarchive supports a number of formats, including zip and (most of)
rar.
Unfortunately, seeking does not work too well. Most libarchive readers
do not support seeking, so it's emulated by skipping data until the
target position. On backwards seek, the file is reopened. This works
fine on a local machine (and if the file is not too large), but will
perform not so well over network connection.
This is disabled by default for now. One reason is that we try
libarchive on every file we open, before trying libavformat, and I'm not
sure if I trust libarchive that much yet. Another reason is that this
breaks multivolume rar support. While libarchive supports seeking in
rar, and (probably) supports multivolume archive, our support of
libarchive (probably) does not. I don't care about multivolume rar, but
vocal users do.
The waf build system generates this already. No point in redoing it in
the header file.
The legacy build system (which we really should drop) didn't; fix it.
Lua script that enables handling of certain commands depending on where
the mouse pointer is. Mostly useful for mouse-wheel handling via
input.conf.
Example:
MOUSE_BTN3 script-message-to zones commands "*-left: add volume +5"
"default: seek +10"
MOUSE_BTN4 script-message-to zones commands "*-left: add volume -5"
"default: seek -10"
Will changes behavior of Mouse Wheel Up/Down to alter volume if mouse is
in the left zone of the window, but re-adds the default to seek if wheel
is used on other parts.
Also add a note that you should not use the old build system. (It's only
kept because of the "asshole maintainer" rule: no matter how broken or
pointless someting is, as long as you're the maintainer and want to keep
it, it stays in the repo.)
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
For now, it needs to be explicitly selected. ENCA is still the default.
This assumes uchardet returns iconv names. This doesn't seem to be
always the case, and the result are lots of iconv errors. So
explicitly check for this situation, and print a warning if it
occurs. It's entirely possible that uchardet support is actually
useless, because names are not necessarily iconv-compatible (but
uchardet doesn't seem to document whether it attempts to return
iconv-compatible names if possible).
Fixes#908.
Normally, vdpau decoded frames are passed directly to a suitable
vo (vo_vdpau or vo_opengl) without ever touching system memory. This
is efficient for output purposes, but prevents any of the regular
filters from being used with such frames.
This new filter implements a read-back step to pull the frames back
into system memory where they can be acted on by other filters.
Eventually the frames will be sent to the vo as if they were normal
software-decoded frames.
Note that a vdpau compatible vo must still be used to ensure that
the decoder is properly initialised.
Signed-off-by: wm4 <wm4@nowhere>
