Most of these are reimar fixing issues found by Coverity static
analyzer, and possibly some more cleanup commits independent from
this.
Since these commits are rather noisy, squash them all together.
Try to make code a bit clearer.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35294 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
audio/out/ao_alsa.c
Check the correct variable for NULL.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35323 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless unreachable code (the loop condition already checks
the 0xff case).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35325 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix typo that might have caused reading beyond the string end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35326 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not needlessly use "long" types.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35331 b3059339-0415-0410-9bf9-f77b7e298cf2
Use AV_RB32 to avoid sign extension issues and validate offset before using it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35332 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove nonsense casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35343 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix crash in case sh_audio allocation failed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35348 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix potential NULL dereference.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35351 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpcodecs/ad_ffmpeg.c
Note: Slightly modified.
Fix malloc failure check to check the correct variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35353 b3059339-0415-0410-9bf9-f77b7e298cf2
Avoid code duplication and pointless casts.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35363 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Error out if an invalid channel list name was specified
instead of continuing and reading outside array bounds
all over the place.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35364 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/tv.c
Make array "static const".
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35365 b3059339-0415-0410-9bf9-f77b7e298cf2
Properly free resources even when encountering many
parse errors.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35367 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
parser-cfg.c
Avoid leaks in error handling.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35380 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not do sign comparisons on "char" type which can be both signed or unsigned.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35381 b3059339-0415-0410-9bf9-f77b7e298cf2
Free cookies file data after parsing it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35382 b3059339-0415-0410-9bf9-f77b7e298cf2
http_set_field only makes a copy of the string, so we still need to
free it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35383 b3059339-0415-0410-9bf9-f77b7e298cf2
check4proxies does not modify input URL, so mark it const.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35390 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove proxy "support" from stream_rtp and stream_upd, trying
to use a http proxy for UDP connections makes no sense.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35394 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/stream_rtp.c
stream/stream_udp.c
Add url_new_with_proxy function to reduce code duplication and memleaks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35395 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/pnm.c
stream/stream_live555.c
stream/stream_nemesi.c
stream/stream_rtsp.c
Fix off-by-one errors in file descriptor validity checks.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35402 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless cast.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35403 b3059339-0415-0410-9bf9-f77b7e298cf2
Abort when opening the file failed instead of calling
"write" with an invalid descriptor.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35404 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless local variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35411 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
stream/http.c
The --start and --end switch now accept a chapter number. The chapter
number is prefixed with '#', e.g. "--start=#2" jumps to chapter 2.
The chapter support might be able to replace --chapter completely, but
for now I am not sure how well this works out with e.g. DVDs and BDs,
and a separate --chapter option is useful interface-wise.
(This was supposed to be added in 51503a, but apparently the fixup
commit adding it was lost in a rebase. This might also be the reason
for the mess-up fixed in 394285.)
The option type m_option_type_rel_time was completely broken. It
interpreted everything starting with a number as percent position. This
is because sscanf() semantics are idiotic (trailing string doesn't need
to be matched), and due to my own idiocy this was overlooked when
testing. Fix by considering sscanf() evil and not using it.
(bstr_sscanf() is a straight wrapper around sscanf()).
Even if the percent code was fixed, there was another bug: it always
interpreted times as negative (starting from end for --start). Fix the
basic logic.
Enable autoprobing for demux_mf, so that image files can be directly
displayed with e.g. "mpv file.jpg --pause". (The --pause switch is
needed to prevent the window from closing immediately.)
Since demux_mf doesn't have any real file format probing and goes by
file extension only, move the demuxer down the demuxer list to ensure
it's checked last. (ffmpeg's demux_mf equivalent, "image2", probes by
file extensions too, and there doesn't seem to be anything that can
probe typical image file formats from binary data.)
Remove the --mf "w" and "h" suboptions. Don't pass the width/height to
the video stream header. Both of these are useless, because the decoder
reads the real image size at a later point from the file headers.
Remove setting the BITMAPINFOHEADER as well, as vd_lavc doesn't need
this.
Enable --correct-pts by default. This fixes displaying a single image
with vo_vdpau (as mentioned by uau).
Keep around a pointer to the sh_video stream header instead of
accessing demuxer->video->sh_video. Fixes a crash when deselecting the
video track.
Note that the format probing is incorrect when opening images from HTTP
locations. File extensions don't have to match the actual file format.
A correct implementation would require to check the MIME type, or to
probe the binary data correctly.
Make demux_lavf not error out if no video or audio track is present.
This allows opening subtitle files with the demuxer.
Improve the test whether subtitles read from demuxers must do explicit
packet reads. (I'm not sure whether always doing these reads could have
bad effects, such as reading too many audio and video packets at once,
so be conservative.)
The computation for the A/V sync value was inside print_status(). Move
it into its own function; this makes things simpler and gets rid of some
minor dead code.
The --keep-open option causes mpv not to close the current file.
Instead, it will pause, and allow the user to seek around. When
seeking beyond the end of the file, mpv does a precise seek back to
the previous last known position that produced video output.
In some corner cases, mpv might not be able to produce video output at
all, despite having created a VO. (Possibly when only 1 frame could be
decoded, but the video filter chain queues frames. Then a VO would be
created, without sending an actual video frame to the VO.) In these
cases, the VO window will not redraw, not even OSD.
Based on a patch by coax [1].
[1] http://devel.mplayer2.org/ticket/210#comment:4
sub_remove remove an external subtitle track, for whatever this may be
needed.
sub_reload removes and re-adds an external subtitle track.
Also rename sub_load to sub_add, because that seems to be more in line
with sub_remove.
"--autosub-match" is close to "--autosub", and reflects what this
option does slightly better. Replace the magic number option values
with choices:
--sub-fuzziness=0 becomes --autosub-match=exact
--sub-fuzziness=1 becomes --autosub-match=fuzzy
--sub-fuzziness=2 becomes --autosub-match=all
Rename the -ss option to -start, and -endpos to -length. Add a -end
option. The -end option always specifies an absolute end time, as
opposed to -endpos/-length.
All these options (--start, --end, --length) now accept relative times.
Percent positions (e.g. "--start=30%") are interpreted as fractions of
the file duration. Negative times (e.g. "--start=-1:00) are interpreted
relative to the end of the file. Chapters (e.g. "--start=#3") yield the
chapter's time position.
The chapter support might be able to replace --chapter completely, but
for now I am not sure how well this works out with e.g. DVDs and BDs,
and a separate --chapter option is useful interface-wise.
Remove the code that attempted to read cookie files from well-known
browser locations. This code was written for ancient browsers, and only
knew about Mozilla and Netscape. While it's possible that these browsers
are still alive and still use the same config locations and cookie file
formats, the only Mozilla-based browser that still matters is Firefox.
Firefox uses a sqlite database for cookies, located in a slightly
different config path.
Just remove this code.
Using --no-msgcolor, error messages that happened before "really"
parsing the command line were still printed in color. Add the
CONF_PRE_PARSE flag to make this option take effect as early as
possible.
This wasn't actually used since the old gray-alpha OSD rendering has
been removed. Removing the documentation for the vo_opengl_old osdcolor
suboption was forgotten as well.
The -zoom option enabled scaling with vo_x11. Remove the -zoom option,
and make its behavior default. Since vo_x11 has to use libswscale for
colorspace conversion anyway, which doesn't do actual extra scaling when
vo_x11 is run in windowed mode, there should be no speed difference with
this change.
The code removed from vf_scale attempted to scale the video to d_width/
d_height, which matters for anamorphic video and the --xy option only.
vo_x11 can handle these natively. The only case for which the removed
vf_scale code could matter is encoding with vo_lavc, but since that
didn't set VOFLAG_SWSCALE, nothing actually changes.
The --enable-profile switch simply adds -p to the CFLAGS, which enables
gcc's extremely worthless "prof" profiling support. This kind of
profiling is broken on the conceptual level and thus harmful, and even
if you want it, you can enable it manually with --extra-cflags.
Also remove $_march $_mcpu from the CFLAGS code. These variables were
always unset, as the code setting them has been removed earlier.
It's silly to print a warning if an optional config file is missing.
Don't print anything at the default message level if an input config
is not found.
Unfortunately, the behavior is the same for explicitly passed input
config files (with --input=conf=file.conf).
Using --loop=inf on an unseekable file would put mpv (and all other
mplayers as well) into an endless loop, trying to seek to the start of
the file on each playback loop iteration. When the seek fails, playback
simply remains in the at-end-of-file state, and tries to issue a new
seek command for looping.
Fix by checking if the seek command fails, and abort looping in this
case. For that, queue_seek() is replaced with seek(). Due to the
circumstances, these two calls happen to be equal in this case: the
seek is absolute (i.e. no seek coalescing done), and the execution of
queued seeks is right after the loop code anyway.
In this example, only f1.mkv was looped: mpv f1.mkv f2.mkv --loop=2
This is because the playloop actually changes the global option value,
assuming it would be reset when going to the next file. When mpv was
changed to not reset options between files, this assumption was broken.
Now "make install" will never strip the binary. "make install-strip"
always will.
The behavior of --enable-debug is unchanged, other than having no
influence anymore on the install targets.
This pixel format is sometimes used with yuv4mpeg.
vo_direct3d used its own IMGFMT_Y16 internally for some reason.
vo_opengl, vo_opengl_old, and vo_direct3d should be able to display
this pixel format natively.
The config directory, controlled by --confdir and which is set to
PREFIX/etc/mpv by default, should not be created by default, as
"make install" doesn't copy any files there. The user can still create
a config file manually if system-wide configuration is desired.
Normally, we always want to enable encoding, as it uses stock ffmpeg
APIs and has no other dependencies or disadvantages.
However, supporting older releases of ffmpeg and Libav (which equal to
outdated git snapshots fix security and crash fixes applied) force us
to disable some advanced ffmpeg API usage, which includes encoding.
Libav 0.8.4 is ridiculously old (in relative terms), so I don't know
how many things are broken silently.
Encoding is disabled, because the required API hasn't been added yet.
(On the other hand, the old API can't be used in newer versions.)
This should improve compatibility with ffmpeg 0.11.2 as well, which
didn't define AV_CODEC_ID_SUBRIP yet.
Add building the manpage to the all target (which is also the default
target). This fixes the behavior that "make install" tried to build the
manpage if it wasn't built yet.
Add rst2man detection to configure, and disable rst2man usage in the all
and install targets if it hasn't been found. You can still build or
install the man page manually (by using the install-mpv-man target),
but the all and install targets won't attempt to use rst2man.
Additionally, building/installing the manpage by default can be
explicitly inhibited using the --disable-manpage configure option.
It's possible to avoid rst2man by using "make mpv install-no-man" as
well.
This removes the rather complicated configure and Makefile parts
related to auto-detecting available languages for manpages and locales.
We don't have non-English manpages or any locales, so this is
pointless. It didn't even work: configure --language=all created an
invalid config.mak that would cause "make install" to fail.
Remove installation of locales. There are no translations at all which
could be installed. Should there ever be someone who is interested in
adding translations, this can be added back in a simpler way.
Rename the --enable-translation configure option to --enable-gettext.
This is what this option really does: enable gettext() use. This may
be interesting for people who want to experiment with localizing mpv,
but is entirely useless for normal use.
Remove detection of the binary codecs directory in configure.
The function fixup_network_stream_cache() accesses stream->opts, which
is NULL in some cases when loading playlists. stream->opts is a pointer
to the global MPOpts struct. For simplicity, this parameter is left
NULL in some cases. Usually, this doesn't matter, because barely
anything in stream/ uses MPOpts anyway.
Hack-fix this for now by not accessing MPOpts and disabling the stream
cache in this case. Calling open_stream() with options==NULL now
basically means: do not use cache settings.
Lowering volume while muted did not work correctly with audio outputs
that support native mute setting separate from volume (ao_alsa and
ao_pulse), because the AO-level volume was not set while muted but was
still being read back. Fix by setting the AO volume in this case.
Put MP_EXPAND_ARGS() in compiler.h, even though it's not compiler
dependent. Both mp_talloc.h and mp_common.h need it, while mp_common.h
includes mp_talloc.h. This is the least annoying solution.
