Expose the central event handling functions explicitly, so that other
parts of the player can use them.
No functional changes. Preparation for the next commit.
This was kept in the codebase because it is slightly faster than --vo=opengl
on really old Intel cards (from the GMA era). Time to kill it, and let it rest.
Fixes#1061
With e.g --start=-3 --audio-buffer=10 the decoder entered EOF state
before the initial sync was finished, entered STATUS_EOF, and just
started playing audio from a random position.
This doesn't handle seeking outside of the file, which is a different
case. E.g. --start=30:00 with audio and video enabled in a file shorter
than 30:00 will play a random last part of audio. This could perhaps be
fixed by using the hr-seek target for cutting audio, instead of the
video PTS, but that would be kind of intrusive, so don't do it for now.
The simpler solution, assuming audio EOF on video EOF, wouldn't work,
because we allow audio to start before video, or to last after video.
Improve the logic how the audio thread decides how to wait until the AO
is ready for new data. The previous commit makes some of this easier,
although it turned out that it wasn't required, and we still can handle
AOs with bad get_space implementation (although the new code prints an
error message, and it might fail in obscure situations).
The new code is pretty similar to the old one, and the main thing that
changes is that complicated conditions are tweaked. AO waiting is now
used better (mainly instead of max>0, r>0 is used). Whether to wakeup
is reevaluated every time, instead of somehow doing the wrong thing
and compensating for it with a flag.
This fixes the specific situation when the device buffer is full, and
we don't want to buffer more data. In the old code, this wasn't handled
correctly: the AO went to sleep forever, because it prevented proper
wakeup by the AO driver, and as consequence never asked the core for new
data. Commit 4fa3ffeb was a hack-fix against this, and now that we have
a proper solution, this hack is removed as well.
Also make the refill threshold consistent and always use 1/4 of the
buffer. (The threshold is used for situations when an AO doesn't
support proper waiting or chunked processing.)
This commit will probably cause a bunch of regressions again.
Round get_space() results in the same way play() rounds the input size.
Some audio APIs do this for various reasons.
This affects only "push" based AOs. Some of these need no change,
because they either do it already right (like ao_openal), or they seem
not to have any such requirements (like ao_pulse).
Needed for the following commit.
"#" starts a comment, so the # key needs to be handled specially.
MPlayer has the same issue, but its input.conf is wrong. Or at least I
think it's wrong; looking at the MPlayer code it's doubtful they somehow
special-case and handle this.
Remove the unnecessary indirection through ao fields.
Also fix the inverted result of AOCONTROL_HAS_TEMP_VOLUME. Hopefully the
change is equivalent. But actually, it looks like the old code did it
wrong.
This is a deadlock caused by a lock order issue: sub/osd.c locks the OSD
first, then the subtitle decoder lock. player/sub.c does the reverse.
Fix this by discussing away the requirement for locking (see below),
which allows us to drop the broken sub lock. sub_get_text() still
acquires and releases the sub decoder lock, but it's not held at the
same time as the OSD lock anymore, so it should be fine.
Originally, the sub lock was acquired because sub_get_text() returns a
pointer to a mutable string. We simply declare that it's ok to call it
unlocked, as long as only 1 thread accesses it, which works out fine in
this case.
With --gapless-audio=no, changing from one file to the next apparently
made it hang, until the player was woken up by unrelated events like
input. The reason was that the AO doesn't notify the player of EOF
properly. the played was querying ao_eof_reached(), and then just went
to sleep, without anything waking it up.
Make it event-based: the AO wakes up the playloop if the EOF state
changes.
We could have fixed this in a simpler way by synchronously draining the
AO in these cases. But I think proper event handling is preferable.
Fixes: #1069
CC: @mpv-player/stable (perhaps)
It seems hrtf works in 48khz only - and if that wasn't the input, the
filter just exited with an error. Make it request the 48khz instead. The
player will insert a resampling filter.
Not sure why it wasn't done like this in the first place.
The Windows version of tmpfile is actually pretty broken. It tries to
create the file in the root directory of the current drive, which means
on Vista and up, it normally fails due to insufficient permissions.
Replace it with a version that uses GetTempPath.
Also remove the Windows-specific note about automatic deletion of the
cache file. FILE_FLAG_DELETE_ON_CLOSE is available in NT, and it should
be pretty reliable.
Somehow, there was a larger misunderstanding in the code: ao_buffer
does not need to be preserved over audio reinit for proper support of
gapless audio. The actual AO internal buffer takes care of this.
In fact, preserving ao_buffer just breaks audio resync. In the ordered
chapter case, end_pts is used, which means not all audio data in the
buffer is played, thus some data is left over when audio decoding
resumes on the next segment. This triggers some code that aborts resync
if there's "audio decoded" (ao_buffer contains something), but no PTS
is known (nothing was actually decoded yet).
Simplify, and always bind the output buffer to the decoder.
CC: @mpv-player/stable (maybe)
The oldest supported FFmpeg release doesn't provide
av_vdpau_alloc_context(). With these versions, the application has no
other choice than to hard code the size of AVVDPAUContext. (On the other
hand, there's av_alloc_vdpaucontext(), which does the same thing, but is
FFmpeg specific - not sure if it was available early enough, so I'm not
touching it.)
Newer FFmpeg and Libav releases require you to call this function, for
ABI compatibility reasons. It's the typcal lakc of foresight that make
FFmpeg APIs terrible. mpv successfully pretended that this crap didn't
exist (ABI compat. is near impossible to reach anyway) - but it appears
newer developments in Libav change the function from initializing the
struct with all-zeros to something else, and mpv vdpau decoding would
stop working as soon as this new work is relewased.
So, add a configure test (sigh).
CC: @mpv-player/stable
This wraps waf's find_program in our own check boilerplate code so that it
can be used in the declarative dependencies section of the wscript.
Can be used like this:
}, {
'name': 'sed',
'desc': 'sed program',
'func': check_program('sed', 'SED'),
}, {
First argument is the program name, and the second is the waf variable name
where the program path will be stored. In this example we will be able to
refer to sed with ${{SED}} when creating waf Tasks in wscript_build.
/cc @giselher: I think you need this for wayland-scanner.
Don't worry, your ~/.config/... paths are safe. This merely removes
handling of $XDG_CONFIG_DIRS for global paths.
Maybe there is a better solution for this, like still including the
"traditional" config dir. But I will leave the fine reading of this
(crappy) spec and fixing the code accordingly to someone else. So, if
anyone has interest in getting this behavior back, you will have to
write a patch. This patch should _also_ not break expected behavior.
Fixes#1060.
The last demuxed file position (demuxer->filepos) is used to estimate
the total playback percentage in files with possible timestamp resets
(like MPEG-PS). Until know, reading from any stream set this position
freely. This makes the position jump around.
Fix this by allowing icnreasing file position only. Reset it on seeking.
With crazy formats, this still could go wrong, but there's only so much
you can do.
HLS streams as demuxed by libavformat have no track title metadata. So
show the HLS bitrate if no title is set. Could be useless or annoying,
so it's a bit controversial, I guess.
--hls-bitrate=min/max lets you select the min or max bitrate. That's it.
Something more sophisticated might be possible, but is probably not even
worth the effort.
This catches a few cases which basically call:
m_property_strdup_ro(..., ..., NULL)
which would return NULL strings. This should generally be avoided
(although it's allowed due to reasons), and it seems most callers
actually intend this to mean M_PROPERTY_UNAVAILABLE.
Because that might be a bad idea.
Note that remote playlists still can use any protocol marked with
is_safe and is_network, because the case of http-hosted playlists
containing URLs using other streaming protocols is not unusual.
Loading a playlist with --playlist from a sub-directory added the
playlist's base path twice: one time in the playlist demuxer, and then
again in playlist_parse_file(). The latter function is used only for
--playlist, so it worked when loading the playlist directly.
(This is probably a mess-up when the MPlayer playlist parsers were
replaced with newer code.)
CC: @mpv-player/stable
The event was copied early, and wasn't released if it was rejected
instead of being added to the event queue. Fix by copying the event at a
point when it's certainly added to the event queue.
The dup_event_data() function is merely moved.
