This was part of osdep/threads.c out of laziness. But it doesn't contain
anything OS dependent. Note that the rest of threads.c actually isn't
all that OS dependent either (just some minor ifdeffery to work around
the lack of clock_gettime() on OSX).
This should fix some issues, such as not being able to set the
"no-video" option with MPV_FORMAT_FLAG.
Note that this changes semantics a bit. Now setting an option strictly
overwrite it, even if the corresponding command line option does not.
For example, if we change --sub to append by default, then setting the
"sub" option via the client API would still never append. (Oddly, this
also applies to --vf-add, which will overwrite the old value when using
the client API.)
I'm doing this because there's no proper separation between the command
line parser and setting an option using the MPV_FORMAT_STRING format.
Maybe the solution to this mess would be adding format aware code (i.e.
m_option_set_node) to every option type, and falling back to strings
only if needed - but this would mean that you couldn't set e.g. an
integer option using MPV_FORMAT_STRING, which doesn't seem to be ideal
either.
In conclusion, the current approach seems to be most robust, but I'm
open to suggestions should someone find that these semantics are a
problem.
If the VO can't do rotation, insert a filter to do this. Note that this
doesn't reuse the filter insertion code from command.c (used by "vf"
input command), because that would end up more complicated: we don't
even want to change the user filter option.
Often, user configs set options that are not suitable for encoding.
Usually, playback and encoding are pretty different things, so it makes
sense to keep them strictly separate. There are several possible
solutions. The approach taken by this commit is to basically ignore the
default config settings, and switch to an [encoding] config profile
section instead. This also makes it impossible to have --o in a config
file, because --o enables encode mode.
See github issue #727 for discussion.
Not needed anymore. I'm not opposed to having asm, but inline asm is too
much of a pain, and it was planned long ago to eventually get rid fo all
inline asm uses.
For the note, the inline asm use that was removed with the previous
commits was almost worthless. It was confined to video filters, and most
video filtering is now done with libavfilter. Some mpv filters (like
vf_pullup) actually redirect to libavfilter if possible.
If asm is added in the future, it should happen in the form of external
files.
For some reason, the buffered_audio variable was used to "cache" the
ao_get_delay() result. But I can't really see any reason why this should
be done, and it just seems to complicate everything.
One reason might be that the value should be checked only if the AO
buffers have been recently filled (as otherwise the delay could go low
and trigger an accidental EOF condition), but this didn't work anyway,
since buffered_audio is set from ao_get_delay() anyway at a later point
if it was unset. And in both cases, the value is used _after_ filling
the audio buffers anyway.
Simplify it. Also, move the audio EOF condition to a separate function.
(Note that ao_eof_reached() probably could/should whether the last
ao_play() call had AOPLAY_FINAL_CHUNK set to avoid accidental EOF on
underflows, but for now let's keep the code equivalent.)
This should probably be an AO function, but since the playloop still has
some strange stuff (using the buffered_audio variable instead of calling
ao_get_delay() directly), just leave it and make it more explicit.
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
The audio subsystem now wakes up the playback thread explicitly, and we
don't need this anymore.
It still could cause dropouts and such if there are bugs in the recently
introduced audio changes, so this is a thing to watch out for.
And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE.
The real pause state can now be queried with the "core-idle" property,
the user pause state with the "pause" property, whether the player is
paused due to cache with "paused-for-cache", and the keep open event can
be guessed with the "eof-reached" property.
This property is set to "yes" if playback was paused due to --keep-open.
The change notification might not always be perfect; maybe that should
be improved.
Currently this is (probably) equivalent to "paused-for-cache", but the
latter is a bit special, while this new property is a bit more general.
One case where they might actually be different is dvdnav menus, but I
haven't checked.
Also add property change notifications for these two properties.
This is a read-only property that uses VFCTRL_GET_METADATA
to retrieve mp_tags metadata from a filter specified by label
Signed-off-by: wm4 <wm4@nowhere>
These playlist parsers are all what's left from the old mplayer playlist
parsing code. All of it is old code that does little error checking; the
type of C string parsing code that gives you nightmare.
Some playlist parsers have been rewritten and are located in
demux_playlist.c. The removed formats were not reimplemented. ASX and
SMIL use XML, and since we don't want to depend on a full blown XML
parser, this is not so easy. Possibly these formats could be supported
by writing a very primitive XML-like lexer, which would lead to success
with most real world files, but I haven't attempted that. As for NSC, I
couldn't find any URL that worked with MPlayer, and in general this
formats seems to be more than dead.
Move playlist_parse_file() to playlist.c. It's pretty small now, and
basically just opens a stream and a demuxer. No use keeping
playlist_parser.c just for this.
Basically a cheap hack to fix that the --msgmodule prefix will cause an
unwanted linebreak by making the line too long.
Suggested by Hamuko in github issue #710.
Fixes#710.
This is needed if you want to reimplement the status line in lua
I could only test drop-frame-count because I didn't find an easy way to
trigger paused-for-cache and total-avsync-change
Signed-off-by: wm4 <wm4@nowhere>
Otherwise, the client API user could not know why playback was stopped.
Regarding the fact that 0 is used both for normal EOF and EOF on error:
this is because mplayer traditionally did not distinguish these, and in
general it's hard to tell the real reason. (There are various weird
corner cases which make it hard.)
Although this is something really basic, Lua's standard library doesn't
provide anything like this. Probably because there are too many ways to
do it right or wrong.
This code tries to be really careful when dealing with mixed
arrays/maps, e.g. when a table has integer keys starting from 1, making
it look like an array, but then also has other keys.
The only tricky part is keeping the cache contents, which is made simple
by allocating the new cache while still keeping the old cache around,
and then copying the old data.
To explain the "Don't use this when playing DVD or Bluray." comment: the
cache also associates timestamps to blocks of bytes, but throws away the
timestamps on seek. Thus you will experience strange behavior after
resizing the cache until the old cached region is exhausted.
Some of these property implementations already send notifications on
their own, but most don't. This takes care of them.
Of course this still doesn't handle all propertry changes - this is
impossible without special-casing each property that can change on its
own.
This turned out ridiculously complex. I think it will have to be
simplified some day. Main reason for the complexity are:
- filtering properties by forcing clients to observe individual
properties explicitly
(to avoid spamming clients with changes they don't want)
- optional retrieval of property value with the notification
(the basic idea was that this is more user friendly)
- allowing to the client to specify a format in which the value
should be retrieved
(because if a property changes its type, the client API couldn't
convert it properly, and compatibility would break)
I don't know yet which of these are important, and everything could
change. In particular, the interface and semantics should be adjusted
to reduce the implementation complexity.
While I consider the API complete, there could (and probably will) be
bugs left. Also while the implementation is complete, it's inefficient.
The complexity of the property matching is O(a*b*c) with a clients,
b observed properties, and c properties changing at once. I threw away
an earlier implementation using bitmasks, because it was too unwieldy.
Remove the use of mp_ring and use a simple array and a bunch of
variables instead. This is way less awkwad.
The change in reserve_reply fixes incorrect tracking of free events.
Now they can be paused and resumed.
Since pausing and disabling the timer is essentially the same underlying
operation, we also just provide one method for it.
mp.cancel_timer probably still works, but I'm considering this
deprecated, and it's removed from the manpage. (We didn't have a release
with this function yet, so no formal deprecation.)
Change the type of the property from a string list (alternating
key/value entries) to a map. Using the client API, this will return
MPV_FORMAT_NODE_MAP, while Lua mp.get_property_native returns a
dictionary-like table.
We've just checked whether a sub-path started with "name/", but that
changes behavior whether the property name has a trailing '/' or not.
Using a helper function to split of path components avoids this problem.
This played the file at a wrong sample rate if the rate was out of
certain bounds.
A comment says this was for the sake of libaf/af_resample.c. This
resampler has been long removed. Our current resampler
(libav/swresample) checks supported sample rates on reconfiguration, and
will error out if a sample rate is not supported. And I think that is
the correct behavior.
