The manpage entry explains this.
(Maybe this option could be always enabled and removed. I don't quite
remember what valid use-cases there are for just disabling audio
entirely, other than that this is also needed for audio decoder init
failure.)
This reverts commit d11184a256.
Unfortunately, there was a lot of unexpected resistance.
Do note that this is still extremely slow, crappy, etc.
Note that vo_x11.c was further edited. Compared to the removed vo_x11.c,
an additional ~200 lines of code was removed in order to simplify it. I
tried to strip it down as much as possible. In particular, support for
odd non-32 bit formats (24, 16, 15, 8 bit) is dropped.
Closes#2300.
The vf_format suboption is replaced with --video-output-levels (a global
option and property). In particular, the parameter is removed from
mp_image_params. The mechanism is moved to the "video equalizer", which
also handles common video output customization like brightness and
contrast controls.
The new code is slightly cleaner, and the top-level option is slightly
more user-friendly than as vf_format sub-option.
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
This is a pseudo-OpenGL extension for letting libmpv query native
windowing system handles from the API user. (It uses the OpenGL
extension mechanism because I'm lazy. In theory it would be nicer to let
the user pass them with mpv_opengl_cb_init_gl(), but this would require
a more intrusive API change to extend its argument list.)
The naming of the extension and associated function was unnecessarily
Windows specific (using "D3D"), even though it would work just fine for
other platforms. So deprecate the old names and introduce new ones. The
old ones still work.
This turns the old scalers (inherited from MPlayer) into a pre-
processing step (after color conversion and before scaling). The code
for the "sharpen5" scaler is reused for this.
The main reason MPlayer implemented this as scalers was perhaps because
FBOs were too expensive, and making it a scaler allowed to implement
this in 1 pass. But unsharp masking is not really a scaler, and I would
guess the result is more like combining bilinear scaling and unsharp
masking.
I see no point in keeping these around. Keeping wrappers for some select
libavfilter filters just because MPlayer had these filters is not a good
reason.
Ultimately, all real filtering work should go to libavfilter, and users
should get used to using vf_lavfi directly. We might even not require
the awful double-nested syntax for using libavfilter one day.
vf_rotate, vf_yadif, vf_stereo3d are kept because mpv uses them
internally. (They all extend the lavfi filters or change their
defaults.) vf_mirror is kept for symmetry with vf_flip. vf_gradfun and
vf_pullup are probably semi-popular, so I'll remove them not yet - only
after some more discussion.
This causes weirdness with the "cache-size" property and option. Only
the read handler of the property included the backbuffer, while all
others did not. Make it consistent, and subtract the backbuffer size
from the cache size.
Fixes#2305.
Make it so that they don't need to be edited on release (no change in
tense). Also, move the "stray" changes after client API version 1.19 to
1.19 itself.
The removal of source-shader is a side effect, since this effectively
replaces it - and the video-reading code has been significantly
restructured to make more sense and be more readable.
This means users no longer have to constantly download and maintain a
separate deband.glsl installation alongside mpv, which was the only real
use case for source-shader that we found either way.
The single path optimization, rendering the video in one shader pass and
without FBO indirections, was removed soem commits ago. It didn't have a
place in this code, and caused considerable complexity and maintenance
issues.
On the other hand, it still has some worth, such as for use with
extremely crappy hardware (GLES only or OpenGL 2.1 without FBO
extension). Ideally, these use cases would be handled by a separate VO
(say, vo_gles). While cleaner, this would still cause code duplication
and other complexity.
The third option is making the single-pass optimization a completely
separate code path, with most vo_opengl features disabled. While this
does duplicate some functionality (such as "unpacking" the video data
from textures), it's also relatively unintrusive, and the high quality
code path doesn't need to take it into account at all. On another
positive node, this "dumb-mode" could be forced in other cases where
OpenGL 2.1 is not enough, and where we don't want to care about versions
this old.
This change makes vo_opengl slightly less compatible (ancient devices
without FBOs will no longer work) and decreases performance in the
simplest case (vo=opengl), in exchange for significantly reducing code
complexity and making everything easier to reason about.
Some users still use this filter, so the filter was going to be kept.
But I overlooked that libavfilter provides this filter. Remove the
redundant wrapper from mpv. Something like --af=lavfi=bs2b should work
and give exactly the same results.
All of these filters are considered not useful anymore by us. Some have
replacements in libavfilter (useable through af_lavfi).
af_center, af_extrastereo, af_karaoke, af_sinesuppress, af_sub,
af_surround, af_sweep: pretty simple and useless filters which probably
nobody ever wants.
af_ladspa: has a replacement in libavfilter.
af_hrtf: the algorithm doesn't work properly on most sources, and the
implementation was buggy and complicated. (The filter was inherited from
MPlayer; but even in mpv times we had to apply fixes that fixed major
issues with added noise.) There is a ladspa filter if you still want to
use it.
af_export: I'm not even sure what this is supposed to do. Possibly it
was meant for GUIs rendering audio visualizations, but it couldn't
really work well. For example, the size of the audio depended on the
samplerate (fixed number of samples only), and it couldn't retrieve the
complete audio, only fragments. If this is really needed for GUIs, mpv
should add native visualization, or a proper API for it.
Can significantly help with very large video resolutions on nvidia
drivers. It doesn't seem to have negative effects on Intel drivers
either. (Although it could have on Intel drivers for older hardware.)
For now, this is only for --vo=opengl-hq. Maybe --vo=opengl should use
it too, but it's still meant to be the crappy, fail-safe default.
Provides a simplistic way to seek without having to care about weird
situations like timestamp vs. playback time. This is good, because the
seek command is currently timestamp based, so when using the seek
command the user _does_ have to care.
This significantly reduces the amount of noticeable flashing when using
tscale kernels with negative lobes, by cutting them off completely.
I'm not sure if this has any negative effects. It needs a bit of
subjective testing over a period of time, so I just made it an option.
Fixes#2155.
If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
For video sync, we want separate playback speed controls for user-
requested speed and the "correction" speed for video timing. Further, we
use this separation to make sure only a resampler is inserted if
playback speed is only changed for video sync correction.
As of this commit, this is basically inactive code. It's just
preparation for the video sync code (the following commit).
This doesn't work too well if sections of the file change to a different
framerate. It lowers our chances to guess the correct FPS in the display
sync code.
For normal playback, this (probably) doesn't help that much anyway,
except that the "estimated-vf-fps" property will regress in the simplest
mkv case. This will be fixed with the next commit.
The now disabled code will probably be removed; it's not useful anymore.
Removes some more internal API calls from the Lua scripting backend.
Which is good, because ideally the scripting backend would use libmpv
functions only.
One awkwardness is that mouse sections are still not supported by the
public commands (and probably will never), so flags like allow-hide-
cursor make no sense to an outside user.
Also, the way flags are passed to the Lua function changes. But that's
ok, because they're only undocumented internal functions, and not
supposed to be used by script users. osc.lua only does due to historical
reasons.
This was requested. It was more or less present internally already and
used for Lua scripting. Lua will switch to the "public" functions in
the following commits.
Add --demuxer-max-packets and --demuxer-max-bytes, which control the
maximum size of the packet queue. These can be helpful to avoid
excessive memory usage.
Memory usage is the reason why there's a limit in the first place. If a
file is more or less broken, and audio and video don't line up, the
decoders will fill up the packet queue trying to read more audio or
video, and the maximum sizes are required to avoid unbounded memory
allocation. Being able to override the maximum sizes is useful; either
for restricting memory usage further, or enlarging the sizes when
attempting to play various broken files.
Remove --demuxer-readahead-packets and --demuxer-readahead-bytes. These
were a bit useless. They could force a minimum packet queue size, but
controlling the queue size with --demuxer-readahead-secs is much nicer.
It's fairly certain nobody ever used these options.
Drop d for toggling framedrop. Toggling this is way too special to be at
such a prominent place, and in fact I believe toggling it is pointless.
Remap deinterlacing from D to d. It's relatively useful and non-
destructive.
As suggested in #973 (almost).
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
For now, it needs to be explicitly selected. ENCA is still the default.
This assumes uchardet returns iconv names. This doesn't seem to be
always the case, and the result are lots of iconv errors. So
explicitly check for this situation, and print a warning if it
occurs. It's entirely possible that uchardet support is actually
useless, because names are not necessarily iconv-compatible (but
uchardet doesn't seem to document whether it attempts to return
iconv-compatible names if possible).
Fixes#908.
See manpage additions.
The main reason for adding this is that we can't guess whether the user
wants his config in his Windows profile or not. The user basically has
to tell mpv what should be done, and the "portable_config" directory
does this implicitly.
Fixes#2042 (approximately).
This is an unfortunate fact of life. Maybe making this the default
wasn't such a good idea after all.
Also update etc/example.conf. It used an obsolete alias for "auto".
As suggested in #2033.
Additionally, change "LGPLv2+" to "LGPLv2.1+". Since this was always
used with the "and later" phrase, this doesn't require any further
discussion.
Also clarify that the "+" means "or later". This should be clear to
anyone with a brain, but you never know with copyright.
Allow setting an arbitrary amount, instead of the fixed 50%.
This is nto striclty backwards compatible. The defaults don't change,
but the --cache/--cache-default options now set the readahead portion.
So in practice, users who configured this until now will see the
double amount of cache being used, _plus_ the 75MB default backbuffer
will be in use.
Probably makes users happy who want bitmap subtitles to show up in the
screen margins, and stops them from doing idiotic crap with vf_expand.
Fixes#2098.
Normally, vdpau decoded frames are passed directly to a suitable
vo (vo_vdpau or vo_opengl) without ever touching system memory. This
is efficient for output purposes, but prevents any of the regular
filters from being used with such frames.
This new filter implements a read-back step to pull the frames back
into system memory where they can be acted on by other filters.
Eventually the frames will be sent to the vo as if they were normal
software-decoded frames.
Note that a vdpau compatible vo must still be used to ensure that
the decoder is properly initialised.
Signed-off-by: wm4 <wm4@nowhere>
Extend the --demuxer-mkv-probe-video-duration behavior to work with
files that are partial and are missing an index. Do this by finding a
cluster 10MB before the end of the file, and if that fails, just read
the entire file. This is actually pretty trivial to do and requires only
5 lines of code.
Also add a mode that always reads the entire file to estimate the video
duration.
Until now, if a stream wasn't seekable, but the stream cache was enabled
(--cache), we've enabled seeking anyway. The idea was that at least
short seeks would typically fall within the cache. And if not, the user
was out of luck and terrible things happened. In other words, it was
unreliable.
Be stricter about it and remove this behavior. Effectively, this will
for example disable seeking in piped data.
Instead of trying to be clever, add an --force-seekable option, which
will always enable seeking if the user really wants it.
See manpage additions. This is mainly useful for vo_opengl_cb, but can
also be applied to vo_opengl.
On a side note, gl_hwdec_load_api() should stop using a name string, and
instead always use the IDs. This should be cleaned up another time.
If the request contains a "request_id", copy it back into the
response. There is no interpretation of the request_id value by mpv; the
only purpose is to make it easier on the requester by providing an
ability to match up responses with requests.
Because the IPC mechanism sends events continously, it's possible for
the response to a request to arrive several events after the request was
made. This can make it very difficult on the requester to determine
which response goes to which request.
Until now, this was for AC3 only. For PCM, we used AudioUnit in
ao_coreaudio, and the only reason ao_coreaudio_exclusive exists
is that there is no other way to passthrough AC3.
PCM support is actually rather simple. The most complicated
issue is that modern OS X versions actually do not support
copying through the data; instead everything must go through
float. So we have to deal with virtual and physical format
being different, which causes some complications.
This possibly also doesn't support some other things correctly.
For one, if the device allows non-interleaved output only, we
will probably fail. (I couldn't test it, so I don't even know
what is required. Supporting it would probably be rather
simple, and we already do it with AudioUnit.)
This is basically a hack for drivers which prevent the mpv DXVA2 decoder
glue from working if OpenGL is in fullscreen mode.
Since it doesn't add any "hard" new API to the client API, some of the
code would be required for a true zero-copy hw decoding pipeline, and
sine it isn't too much code after all, this is probably acceptable.
This should make interpolation work much better in general, although
there still might be some side effects for unusual framerates (eg. 35 Hz
or 48 Hz). Most of the common framerates are tested and working fine.
(24 Hz, 30 Hz, 60 Hz)
The new code doesn't have support for oversample yet, so it's been
removed (and will most likely be reimplemented in a cleaner way if
there's enough demand). I would recommend using something like robidoux
or mitchell instead of oversample, though - they're much
smoother for the common cases.
At least Matroska files have a "forced" flag (in addition to the
"default" flag). Export this flag. Treat it almost like the default
flag, but with slightly higher priority.
We want to distinguish actual errors, and just aborting the program
intentionally.
Also be a bit more careful with handling the wait() exit status: do not
called WEXITSTATUS() without checking WIFEXITED() first.
DVD/BD menu support never worked right, and are a pain to maintain. In
particular, DVD menus never actually worked correctly, because
highlights were not rendered correctly. Fixing this requires major
effort, which I'm not interested to spend.
Most importantly, the requirement to switch streams without losing the
DVD/BD state caused major weirdness in the playback core. It was
implemented by somehow syncing the playback state to the DVD/BD
implementation (in stream_dvdnav.c etc.), and then reloading the demuxer
without destroying and recreating the stream. This caused a bunch of
special-cases which I'm looking forward to remove.
For now, don't just remove everything related to menu support and just
disable it. If someone volunteers, it can be restored (i.e. rewritten)
in a reasonable way. If nobody volunteers soon, it goes.
Client API users can enable log output with mpv_request_log_messages().
But you can enable only a single log level. This is normally enough, but
the --msg-level option (which controls the terminal log level) provides
more flexibility. Due to internal complexity, it would be hard to
provide the same flexibility for each client API handle. But there's a
simple way to achieve basically the same thing: add an option that sends
log messages to the API handle, which would also be printed to the
terminal as by --msg-level.
The only change is that we don't disable this logic if the terminal is
disabled. Instead we check for this before the message is output, which
in theory can lower performance if messages are being spammed. It could
be handled with some more effort, but the gain would be negligible.
So successful playback and user quit can be distinguished, for whatever
reason you may want to do this.
Normally, the "quit" command can be customized, but this does not work
for quit commands sent by the terminal signal handler. One solution
would be introducing something like "ON_SIGNAL" (equivalent to
"CLOSE_WIN"), but considering there are a bunch of possible signals, I'd
rather not get into this. So go with the dumb solution.
Probably fixes#2029.
This provides a new method for enabling spdif passthrough. The old
method via --ad (--ad=spdif:ac3 etc.) is deprecated. The deprecated
method will probably stop working at some point.
This also supports PCM fallback. One caveat is that it will lose at
least 1 audio packet in doing so. (I don't care enough to prevent this.)
(This is named after the old S/PDIF connector, because it uses the same
underlying technology as far as the higher level protoco is concerned.
Also, the user should be renamed that passthrough is backwards.)
The "osd" command cycles between 4 states (OSD level 0-3), which is
probably confusing and inconvenient. OSD levels 0 and 2 are rarely
needed. I would claim there is normally not much of a need to completely
disable OSD by setting level 0 during playback. Level 2 is just slightly
less information than level 3, and I'm not sure why it exists at all.
Change it so that it toggles between level 3 and 1. Note that this
ignores the default OSD level. If the default is 3, the first use of
this key will set it to 3 again. Just assume 1 is the default. If
someone complains, this could be improved.
It polluted the global namespace, instead of exporting the function
properly.
For now, keep it compatible by explicitly keeping the bogus export.
Also fix a mistake in the manpage example.
This command has been deprecated in the 0.8.x and 0.9.x releases - get
rid of it. Its only point ever was MPlayer compatibility, which broke
years ago anyway.
They're completely orthogonal concepts, merged in the past due to
convenience and ease of implementing it in the old #ifdef hell renderer.
Especially after the CMS stuff was generalized by 634b4a, this was a
trivial change to implement and also means color management will be much
higher quality when enabled with vo=opengl (which had quantization
issues in the past due to the 8 bit FBO format and upscaling), since it
can be done in a single pass now.
Wnile it seems quite logical to me that commands use _ as word
separator, while properties use -, I can't really explain the
difference, and it tends to confuse users as well. So always
prefer - as separator for everything.
Using _ still works, and will probably forever. Not doing so would
probably create too much chaos and confusion.
Also replace their implementation with the recently introduced
properties. One significant difference is that audio-channels using OSD
formatting does not print the channel layout. The user can just use the
replacement property instead.
This brings the volume control closer to what is percepted as linear
volume change.
Adjust the --softvol-max default to roughly the old maximum (roughly
doubles the gain).
Now --volume takes an absolute volume, meaning it doesn't depend on
--softvol-max. 0 is still silence, and 100 now always means unchanged
volume. The OSD and the "volume" property are changed accordingly.
Also raise the minimum value of --softvol-max. A value below 100 makes
no sense and breaks the OSD.
Only absolute percentage seeking was permitted first. It is now also
possible to seek by relative percentage.
MPSEEK_FACTOR is used as seek_type.
Fixes#1950.
Signed-off-by: wm4 <wm4@nowhere>
Instead of having separate backends, make use of GLES a flag. This
reduces the number of backends and the resulting annoyances.
Also, nobody cares about using GLES, so there's no backward
compatibility either.
(I have no idea why there are different modes.)
Instead of risking to drop frames too early, give it some margin. Since
there are situations this could deadlock, wait with a timeout. This can
happen if e.g. the API user is refusing to render anything, or if
uninitialization is happening.
OpenSSL and GnuTLS are still causing this problem (although FFmpeg could
be blamed as well - but not really). In particular, it was happening to
libmpv users and in cases the pseudo-gui profile is used. This was
because all signal handling is in the terminal code, so if terminal is
disabled, it won't be set. This was obviously a questionable shortcut.
Avoid further problems by always blocking the signal. This is done even
for libmpv, despite our policy of not messing with global state.
Explicitly document this in the libmpv docs. It turns out that a version
bump to 1.17 was forgotten for the addition of MPV_FORMAT_BYTE_ARRAY, so
document that change as part of 1.16.
This creates the window before the first file is loaded. This was
requested a bunch of times, but on the other hand a change to make this
behavior the default was reverted some time ago, because other users
hated it.
Reduces (but likely does not remove) the danger of rounding intermediate
values down to 8 bit. This is important for cscale, or any other
processing that might store raw YUV values in framebuffers.
Fixes#1918.
ao_coreaudio uses AudioUnit - the OSX software mixer. In theory, it
supports multichannel audio just fine. But in practice, this might be
disabled by default, and the user is supposed to select a multichannel
base format in the "Audio MIDI Setup" utility.
This option attempts to change this setting automatically. Some possible
disadvantages and caveats are listed in the manpage additions. It is off
by default, since changing this might be rather bad behavior for a
normal application.
Since commit 7381db60, strings like "~desktop/" were expanded as
platform-specific paths by mpv. Apparently this similarity to standard
Unix shell expansion caused confusion, so change it to "~~desktop/". The
shell doesn't expand this, so it should be better.
This now stores caches for multiple ICC profiles, potentially all the
user has ever used. The big use case for this is for users with multiple
monitors. The old logic would mandate recomputing the LUT and discarding
the cache whenever dragging mpv from one screen to another.
This also avoids having to save and check the ICC profile itself, since
the file name already uniquely determines it.
This should take care of the endless complaints about the default
location for screenshots (and will of course create new ones).
If the screenshot-template is set to an absolute path, the directory
won't be used. So this should be reasonably compatible.
So that the user realizes where they come from, or can find them at all.
This was a common complaint, and this is the most lazy solution. Better
suggestions for a default template are welcome.
win32 has a special function for this.
I'm not sure about OSX - it seems ~/Desktop can be hardcoded, and the
OSX GUI actually localizes the _displayed_ path in its UI.
For Unix, there is not much to be done, or is there.
Now the rescan_external_files command will by default reselect the audio
and subtitle streams. This should be more intuitive.
Client API users and Lua scripts might break, but can be fixed in a
backward-compatible way by setting the mode explicitly.
This was in the "Window" section. It has absolutely nothing to do with
windows. Move it to the "Miscellaneous" section instead. The "--mc"
option, which has a similar function, was already there.
The build failed because rst2pdf apparently has problems with
page breaks. In this case, the link to the ALSA upmix guide was
causing a page break in an admonition block. My guess is that
rst2pdf screws up when it can’t fill at least one line of text
following a page break, so I worked around this by making that
paragraph a little longer. Seems to do the trick.
I also shortened the URL using GitHub’s service because it was
causing some rather unsightly formatting in the manpage output.
Maybe we should just build HTML instead of a PDF.
Since joystick support was removed and is a difference from mplayer, it
should be included in the document with the mplayer changes.
It will help new users who were using mplayer's joystick support to
seek alternatives when switching to mpv. It will also be helpful for
people that had problems with the joystick support in mplayer (for
example, by incorrectly recognizing other input devices as joystick)
to know that those problems won't persist in mpv.
Approximate time of video buffered in the demuxer, in seconds. Same as
`demuxer-cache-duration` but returns the last timestamp of bufferred
data in demuxer.
Signed-off-by: wm4 <wm4@nowhere>
This will be used in the following commit, which adds screenshot_raw.
The reasoning is that this will be better for binding scripting
languages.
One could special-case the screenshot_raw commit and define fixed
semantics for passing through a pointer using the current API, like
formatting a pointer as string. But that would be ridiculous and
unclean.
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
Useful for dealing with libavfilter's terrible graph syntax.
Not strictly backwards compatible (for example "[a[b]" fails now - the
"[" within the quote is interpreted now). But hopefully it's obscure
enough not to warrant any kind of compatibility hacks.
It's entirely useless, especially now that vo.c handles screenshots in a
generic way, and requires no special VO support. There are some
potential weird use-cases, but actually I've never seen it being used.
The old behavior does not make too much sense after all. If you don't
want to file to be overwritten, the user can check this manually.
This is a change in behavior - let's hope nobody actually relied on it.
libavcodec makes it impossible to distinguish dropped frames (requested
with AVCodecContext.skip_frame), and cases when the decoder simply does
not return a frame by default (such as with VP9, which has invisible
reference frames).
This confuses users when decoding VP9 video. It's basically a cosmetic
issue, so just paint it over by ignoring them if framedropping is
disabled.
It seems this choice was never documented. "always" is actually older
than "yes", so just declare it a compatibility value for "yes". (Also
move it before "always" in the C code to make this clear.)
I tried to find that option by searching for terms like “cover art”
and got nothing. I imagine most users would look for similar terms.
Hope this helps.
The gender specific pronoun is changed, since we shouldn't assume the
gender of the user.
The sentence itself is also changed to be more correct in general.
This could help in cases where the DWM (Windows desktop compositor) adds another
layer of bufferring and therefore the SwapBuffers timing could get messed up.
Signed-off-by: wm4 <wm4@nowhere>
This seems to come up often. I guess '.' vs. ':' for Lua calls is
confusing, and this part of the scripting API is the only one which
requires using it.
There still might be FFmpeg demuxers which mess up if audio is disabled
(like it happened to the FLV demuxer), but these are bugs and shouldn't
happen.
This merges all of the scaler-related options into a single
configuration struct, and also cleans up the way they're passed through
the code. (For example, the scaler index is no longer threaded through
pass_sample, just the scaler configuration itself, and there's no longer
duplication of the params etc.)
In addition, this commit makes scale-down more principled, and turns it
into a scaler in its own right - so there's no longer an ugly separation
between scale and scale-down in the code.
Finally, the radius stuff has been made more proper - filters always
have a radius now (there's no more radius -1), and get a new .resizable
attribute instead for when it's tunable.
User-visible changes:
1. scale-down has been renamed dscale and now has its own set of config
options (dscale-param1, dscale-radius) etc., instead of reusing
scale-param1 (which was arguably a bug).
2. The default radius is no longer fixed at 3, but instead uses that
filter's preferred radius by default. (Scalers with a default radius
other than 3 include sinc, gaussian, box and triangle)
3. scale-radius etc. now goes down to 0.5, rather than 1.0. 0.5 is the
smallest radius that theoretically makes sense, and indeed it's used
by at least one filter (nearest).
Apart from that, it should just be internal changes only.
Note that this sets up for the refactor discussed in #1720, which would
be to merge scaler and window configurations (include parameters etc.)
into a single, simplified string. In the code, this would now basically
just mean getting rid of all the OPT_FLOATRANGE etc. lines related to
scalers and replacing them by a single function that parses a string and
updates the struct scaler_config as appropriate.
This makes the core much more elegant, reusable, reconfigurable and also
allows us to more easily add aliases for specific configurations.
Furthermore, this lets us apply a generic blur factor / window function
to arbitrary filters, so we can finally "mix and match" in order to
fine-tune windowing functions.
A few notes are in order:
1. The current system for configuring scalers is ugly and rapidly
getting unwieldy. I modified the man page to make it a bit more
bearable, but long-term we have to do something about it; especially
since..
2. There's currently no way to affect the blur factor or parameters of
the window functions themselves. For example, I can't actually
fine-tune the kaiser window's param1, since there's simply no way to
do so in the current API - even though filter_kernels.c supports it
just fine!
3. This removes some lesser used filters (especially those which are
purely window functions to begin with). If anybody asks, you can get
eg. the old behavior of scale=hanning by using
scale=box:scale-window=hanning:scale-radius=1 (and yes, the result is
just as terrible as that sounds - which is why nobody should have
been using them in the first place).
4. This changes the semantics of the "triangle" scaler slightly - it now
has an arbitrary radius. This can possibly produce weird results for
people who were previously using scale-down=triangle, especially if
in combination with scale-radius (for the usual upscaling). The
correct fix for this is to use scale-down=bilinear_slow instead,
which is an alias for triangle at radius 1.
In regards to the last point, in future I want to make it so that
filters have a filter-specific "preferred radius" (for the ones that
are arbitrarily tunable), once the configuration system for filters has
been redesigned (in particular in a way that will let us separate scale
and scale-down cleanly). That way, "triangle" can simply have the
preferred radius of 1 by default, while still being tunable. (Rather
than the default radius being hard-coded to 3 always)
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
It was "by design" possible to make mpv crash if the parameters didn't
make enough sense, like "format=rgb24:yuv420p". While forcing the format
has some minor (rather questionable) use for debugging, allowing it to
crash is just stupid.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
