Remove our own hacky reconnection code, and use libavformat's feature for
that. It's disabled by default, and until recently it did not work too
well. This has been fixed in recent ffmpeg git master[1], so there's no reason
to keep our own code.
[1] FFmpeg/FFmpeg@8a108bdea0
We set "reconnect_delay_max" to 7, which limits the maximum time it
waits. Since libavformat doubles the wait time on each reconnect attempt
(starting with 1), and stops trying to reconnect once the wait time is
over the reconnect_delay_max value, this allows for 4 reconnection
attempts which should add to 11 seconds maximum wait time. The default
is 120, which seems too high for normal playback use.
(The user can still override these parameters with --stream-lavf-o.)
Don't drop the stream buffers, because the read call (that must have
been failing) might try to extend an existing read buffer in the first
place. Just move the messy seek logic to stream_lavf.c. (In theory,
stream_lavf should probably make libavformat connect at the correct
offset instead of using a seek to reconnect it again. This patch doesn't
fix it, but at least it's a good argument to have the messing with the
position not in the generic code.)
Also update the comment about avio not supporting reconnecting. It has
that feature now. Maybe we should use it, but only after it gets fixed.
I've decided that MP_TRACE means “noisy spam per frame”, whereas
MP_DBG just means “more verbose debugging messages than MSGL_V”.
Basically, MSGL_DBG shouldn't create spam per frame like it currently
does, and MSGL_V should make sense to the end-user and provide mostly
additional informational output.
MP_DBG is basically what I want to make the new default for --log-file,
so the cut-off point for MP_DBG is if we probably want to know if for
debugging purposes but the user most likely doesn't care about on the
terminal.
Also, the debug callbacks for libass and ffmpeg got bumped in their
verbosity levels slightly, because being external components they're a
bit less relevant to mpv debugging, and a bit too over-eager in what
they consider to be relevant information.
I exclusively used the "try it on my machine and remove messages from
MSGL_* until it does what I want it to" approach of refactoring, so
YMMV.
This affects small seeks backwards while within the buffer. Demuxers
usually avoid this, so it's probably not triggered very often. (Although
demux_mkv.c potentially triggers it often, and it uses stream_peek() to
explicitly guarantee that it can use this code to seek back.) The
condition is complex enough to warrant an assertion.
While this is perfectly OK on Unix, it causes annoying valgrind
warnings, and might be otherwise confusing to others.
On Windows, the runtime can actually abort the process if this is
called.
push.c part taken from a patch by Pedro Pombeiro.
All relevant authors have agreed.
There are two exceptions, patches by authors who could not be reached.
This commit tries to remove their copyright.
a0f08fbe: messes with the seeking code corner cases. The EOF flag logic
was changed at some point, and always had a flaky history (see e.g.
347cf97250274ca370411f275999efb90d5e6084ff08d0c32e2f77e3de5566f09554a844, all which happened after that patch, MPlayer ones without that
patch). I claim that all of the copyright the patch might have added is
gone. Except the message in stream_seek(), which this commit removes.
The other code removed/changed in stream_seek() is probably not from
that patch, but it doesn't hurt to be sure, and also makes it more
readable. (It might change the behavior so that sometimes the eof flag
is set after a seek, but it doesn't matter here.)
2aa6acd9: it looks like the seek_forward() modified by this patch was
later moved to stream.c and renamed to stream_skip_read() in a790f2133.
(Looking closer at it, it was actually modified again a bunch of times,
fixing the logic.) I rewrote it in this commit. The code ended up rather
similar, which probably could lead to doubts whether this was done
properly, but I guess the reader of this will just have to believe me. I
knew what stream_skip_read() was supposed to do (which was reinforced
when I tried to replace it on the caller side), without reading the
pre-existing code in detail. I had to "relearn" the logic how buf_pos
and bug_len work - it was actually easy to see from stream_read_char()
how to skip the data, essentially by generalizing its logic from 1 byte
to N bytes. From the old code I only "used" the fact that it's obviously
a while(len>0) look, that has to call stream_fill_buffer repeatedly to
make progress. At first I actually didn't use stream_fill_buffer_by(),
but the variant without _by, but readded it when I checked why the old
code used it (see cd7ec016e7). This has to be good enough. In the end,
it's hard to argue that this could be implemented in a way not using
such a loop.
Other than this, I could add the usual remarks about how this code was
not modularized in the past, and how stream.c contained DVD code, and
how this was later modularized, moving the copyright to other files, and
so on. Also, if someone wrote a stream module, and was not asked about
LGPL relicensing, we don't consider the entry in stream_list[]
copyrightable.
The original functions come from 24c6f11c8b, which says that these
functions were copied from another project. This other project is GPL
and was written by an unknown author, so there is no hope to relicense
them to LGPL.
Replace the existing functions with code written by Avi Halachmi. He did
not see the old code, but wrote it based on the function signature and
an extended description of what they should do (http://sprunge.us/edia).
Some additional help was provided by me (in particular the function of
the "ok" parameter and how to implement it - not in the original
ASFRecorder code).
Some of the code is hilariously similar, but these are coincidences. The
name of the variable "c" probably "leaked" from me, but "o" is a true
coincidence.
The code was integrated by me - my only change is changing the function
names to the old ones, moving the order of the top-level declarations,
and changing "default_ok" to "url_default_ok", and changing the strings
from char* to char[].
The author of the new code is Avi Halachmi.
Reallows enabling dvdnav without enabling dvdread which was broken
in 77cbb3543 when they were both disabled by default.
Since dvdnav requires dvdread, we can enable dvdread:// even if
--enable-dvdread isn't passed.
Fixes#4290
Because it's kind of dumb. (But not sure if it was worth the trouble.)
For stream_file.c, we add new explicit fields. The rest are rather
special uses and can be killed by comparing the stream impl. name.
The changes to DVD/BD/CD/TV are entirely untested.
"uncached_stream" is a pretty bad name. It could be mistaken for a
boolean, and then its meaning would be inverted. Rename it.
Also add a "caching" field, which signals that the stream is a cache or
reads from a cache. This is easier to understand and more flexible.
This is almost cosmetic, but removes the duplicated EOF-setting.
Somewhat oddly, this will enter the reconnect path and exit it
immediately again - should be fine.
Commit 7be495b3 added the cancellation test, but forgot to set the eof
flag. This could lead to demux_mkv.c not terminating if the stream was
cancelled in some code paths.
This function is what is supposed to set the EOF flag in the first
place, so just add the missing code.
Benefits demux_mkv.c, or demux_lavf.c during probing. In particular
demux_lavf.c can sometimes get "stuck" when reading from a slow/blocking
source, and if probing needs more than a few iterations.
Since this is a read of an atomic variable with relaxed semantics, this
should have no impact on reading speed at all, not even theoretically.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
--list-protocol was printing a *:// entry, which looked strange at best.
The "*" protocol was used to always match everything, so stream_cb.c
could hook in custom protocols with a prefix chosen by the API user.
Change it instead so that an empty protocol list means "match all",
which also gets rid of the special-cased "*" entry.
This has all been made unnecessary recently. The change not to copy the
global option struct in particular can be made because now nothing
accesses the global options anymore in the demux and stream layers.
Some code that was accidentally added/changed in commit 5e30e7a0 is also
removed, because it was simply committed accidentally, and was never
used.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
If the normal stream cache init fails, and a file cache was initialized
before, we free the file cache as well. But since the file cache is
chained to the real stream, the real stream will also be freed. This has
to be prevented by clearing the pointer to the original stream in the
uncached_stream field.
This could in particular be triggered by using --cache-initial=1000 and
aborting playback during loading. (Without that option, stream cache
init failure is far less likely.)
For clang, it's enough to just put (void) around usages we are
intentionally ignoring the result of.
Since GCC does not seem to want to respect this decision, we are forced
to disable the warning globally.
This code evolved into an ifdef mess as support for cancellation on
Windows was added. Make the Windows-specific code completely separate.
It looks cleaner, and it also means that some of the posix code is not
uselessly enabled on Windows. The latter made msvcrt.dll output warnings
because it does not like -1 passed as FD to read/write. (The same would
be harmless on POSIX.)
This is only for specific Hauppage cards. According to the comments in
who is actively using this feature. Get it out of the way.
Anyone who still wants to use this should complain. Keeping this code
would not cause terribly much additional work, and it could be restored
again. (But not if the request comes months later.)
Don't print the URL that is opened twice. stream.c and stream_lavf.c
each printed it once. Remove the logging from stream_lavf.c, and move
the log call to a more interesting point.
This works similar to the existing .rar support, but uses libarchive.
libarchive supports a number of formats, including zip and (most of)
rar.
Unfortunately, seeking does not work too well. Most libarchive readers
do not support seeking, so it's emulated by skipping data until the
target position. On backwards seek, the file is reopened. This works
fine on a local machine (and if the file is not too large), but will
perform not so well over network connection.
This is disabled by default for now. One reason is that we try
libarchive on every file we open, before trying libavformat, and I'm not
sure if I trust libarchive that much yet. Another reason is that this
breaks multivolume rar support. While libarchive supports seeking in
rar, and (probably) supports multivolume archive, our support of
libarchive (probably) does not. I don't care about multivolume rar, but
vocal users do.
This code does not know whether the stream supports reconnecting until
STREAM_CTRL_RECONNECT is called. So the message should be printed after
it. To avoid that reconnects that succeed on the first try go unnoticed,
print a warning on success.
I think this is what I alwass missed ever since I found the MPlayer
cache options: a way to enable the cache on local files with the default
settings, whatever they are.
Seems appropriate, and will probably avoid performance surprises with
scary architectures which don't have trivial implementations for atomic
loads. (Consider that demux_mkv calls this very often now, and
libavformat demuxers and streams did this for a while now.)
It was possible to make the player play local files by putting rar://
links into remote playlists, and some other potentially unsafe things.
Redo the handling of it. Now the rar-redirector (the thing in
demux_playlist.c) sets disable_safety, which makes the player open any
playlist entries returned. This is fine, because it redirects to the
same file anyway (just with different selection/interpretation of the
contents). On the other hand, rar:// itself is now considered fully
unsafe, which means that it is ignored if found in normal playlists.
Refactors an older hack, which for some reason used a more complicated
way. This generates the playlist representing the contents of the rar
file in demux_playlist.c. The pseudo-demuxer could easily be separate
from the the playlist parsers (and in fact there's almost no shared
code), but I don't think this obscure feature deserves a separate file.
Sample files created with:
rar a -v20000k -m0 files.rar file1.mkv file1.mkv
Most things stopped using this field for better support of growing
files. Go through the trouble to repalce the remaining uses, so it can
be removed.
Also move the "streaming" field; saves 4 bytes (wow!).
Fix return types and return values to make them more consistent. Some
reformatting and making code more concise.
In stream_reconnect(), avoid the additional mp_cancel_test() call by
moving the "connection lost" message below the mp_cancel_wait() call,
which effectively leads to the same behavior when the stream was already
canceled. (The goal is not to show the message in this case.)
Merge stream_seek_long() into stream_seek(). It was the only caller.
Always clear the eof flag on seeks.
Reduce access to stream internals in cache.c and stream_lavf.c.
In my opinion, libavformat should be doing this. But a patch handling a
very safe case rejected, so I suppose we have to do it manually. (This
patch was only escaping spaces, which can never work because they break
the basic syntax of the HTTP protocol.)
This commit attempts to do 2 things:
- Try to guess whether libavformat will use the URL for http. This is
not always trivial, because some protocols will recursively pass part
of the user URL to http in some way.
- Try to fix invalid URLs. We fix only the simplest case: only
characters that are never valid are escaped. This excludes invalid
escape codes, which happen with freestanding '%' characters.
Fixes#1495.
...because everything is terrible.
strerror() is not documented as having to be thread-safe by POSIX and
C11. (Which is pretty much bullshit, because both mandate threads and
some form of thread-local storage - so there's no excuse why
implementation couldn't implement this in a thread-safe way. Especially
with C11 this is ridiculous, because there is no way to use threads and
convert error numbers to strings at the same time!)
Since we heavily use threads now, we should avoid unsafe functions like
strerror().
strerror_r() is in POSIX, but GNU/glibc deliberately fucks it up and
gives the function different semantics than the POSIX one. It's a bit of
work to convince this piece of shit to expose the POSIX standard
function, and not the messed up GNU one.
strerror_l() is also in POSIX, but only since the 2008 standard, and
thus is not widespread.
The solution is using avlibc (libavutil, by its official name), which
handles the unportable details for us, mostly. We avoid some pain.
In addition to the messed-up expression, the endianness was also
inverted. The code reads big endian by default.
It "worked" by coincidence, but for little endian, codepoints outside of
latin1 were broken.
The broken expression was found by Coverity.
stream_rar.c peeks the first few bytes when trying to open, which means
that opening any stream reads at least 2KB of data (internal buffer
size) on opening. This broke --stream-dump, which saved only the data
following this initial buffer.
Hack it around by writing the current buffer to the capture file too,
and move stream_capture_write() above stream_set_capture_file() for this
purpose.
Cleaner solutions might include: handling the terrible rar thing
differently, or using the "proper" stream API for dumping. (The latter
is not done, because --stream-dump shares code with the --stream-capture
misfeature.)
Fixes#1215.
On win32, open() is a function-like macro. The line of code changed
with this commit accidentally expanded the macro. Prevent this macro
expansion. Not sure why that happened now. Since as far as I remember
system functions can be defined as macros, this affects in theory not
only win32.
Because 1) Lua is terrible, and 2) popen() is terrible. Unfortunately,
since Unix is also terrible, this turned out more complicated than I
hoped. As a consequence and to avoid that this code has to be maintained
forever, add a disclaimer that any function in Lua's utils module can
disappear any time. The complexity seems a bit ridiculous, especially
for a feature so far removed from actual video playback, so if it turns
out that we don't really need this function, it will be dropped again.
The motivation for this commit is the same as with 8e4fa5fc.
Note that there is an "#ifndef __GLIBC__". The GNU people are very
special people and thought it'd be convenient to actually declare
"environ", even though the POSIX people, which are also very special
people, state that no header declares this and that the user has to
declare this manually. Since the GNU people overtook the Unix world with
their very clever "embrace, extend, extinguish" strategy, but not 100%,
and trying to build without _GNU_SOURCE is hopeless; but since there
might be Unix environments which support _GNU_SOURCE features partially,
this means that in practice "environ" will be randomly declared or not
declared by system headers. Also, gcc was written by very clever people
too, and prints a warning if an external variable is declared twice (I
didn't check, but I suppose redeclaring is legal C, and not even the gcc
people are clever enough to only warn against a definitely not legal C
construct, although sometimes they do this), ...and since we at mpv hate
compiler warnings, we seek to silence them all. Adding a configure test
just for a warning seems too radical, so we special-case this against
__GLIBC__, which is hopefully not defined on other libcs, especially not
libcs which don't implement all aspects of _GNU_SOURCE, and redefine
"environ" on systems even if the headers define it already (because they
support _GNU_SOURCE - as I mentioned before, the clever GNU people wrote
software THAT portable that other libcs just gave up and implemented
parts of _GNU_SOURCE, although probably not all), which means that
compiling mpv will print a warning about "environ" being redefined, but
at least this won't happen on my system, so all is fine. However, should
someone complain about this warning, I will force whoever complained
about this warning to read this ENTIRE commit message, and if possible,
will also force them to eat a printed-out copy of the GNU Manifesto, and
if that is not enough, maybe this person could even be forced to
convince the very clever POSIX people of not doing crap like this:
having the user to manually declare somewhat central symbols - but I
doubt it's possible, because the POSIX people are too far gone and only
care about maintaining compatibility with old versions of AIX and HP-UX.
Oh, also, this code contains some subtle and obvious issues, but writing
about this is not fun.
stream provides a read buffer (so even something like stream_read_char()
is very fast). This means the stream reads ahead by a few KBs, and
implies that the internal position (s->pos, which would match e.g. the
file position in stream_file.c), and the external position
(stream_tell()) can be different. stream_tell() shows how these are
related.
When dropping buffers, which happens on byte-level discontinuities with
a bunch of streams (including DVB), we should not change the position as
seen by the demuxer. On the other hand, the internal position is not
really meaningful, since these streams aren't seekable anyway. So just
change the code such that stream_drop_buffers() doesn't change the
demuxer visible position.
I'm hoping that this will fix a few problems with DVB. (Also see
previous commit.)
Might matter when libavformat tries to do tiny seekbacks in an
unseekable stream, and the seekback buffer isn't large enough. In this
case, seeking would fail, and would drop the current buffer. The
seekback would end up dropping future data.
This change probably doesn't have any observable effects. libavformat
normally has its own stream buffer, and demux_mkv.c tries carefully
never to seek back.
Similar as the previous commits.
Most of the code is actually copied from the stream_dvdnav.c code, but
I'd rather prefer to duplicate it, than to entangle them. The latter
would probably result in terrible things in a few years.
Same hack as with stream_dvd.c.
VIDEO_TS.IFO files are now opened via stream_dvdnav.c. Directories
containing a VIDEO_TS.IFO or VIDEO_TS/VIDEO_TS.IFO file are also
opened with it.
This was once central, but now it's almost unused. Only vf_divtc still
uses it for extremely weird and incomprehensible reasons. The use in
stream.c is trivial. Replace these, and remove mpbswap.h.
This mechanism originates from MPlayer's way of dealing with blocking
network, but it's still useful. On opening and closing, mpv waits for
network synchronously, and also some obscure commands and use-cases can
lead to such blocking. In these situations, the stream is asynchronously
forced to stop by "interrupting" it.
The old design interrupting I/O was a bit broken: polling with a
callback, instead of actively interrupting it. Change the direction of
this. There is no callback anymore, and the player calls
mp_cancel_trigger() to force the stream to return.
libavformat (via stream_lavf.c) has the old broken design, and fixing it
would require fixing libavformat, which won't happen so quickly. So we
have to keep that part. But everything above the stream layer is
prepared for a better design, and more sophisticated methods than
mp_cancel_test() could be easily introduced.
There's still one problem: commands are still run in the central
playback loop, which we assume can block on I/O in the worst case.
That's not a problem yet, because we simply mark some commands as being
able to stop playback of the current file ("quit" etc.), so input.c
could abort playback as soon as such a command is queued. But there are
also commands abort playback only conditionally, and the logic for that
is in the playback core and thus "unreachable". For example,
"playlist_next" aborts playback only if there's a next file. We don't
want it to always abort playback.
As a quite ugly hack, abort playback only if at least 2 abort commands
are queued - this pretty much happens only if the core is frozen and
doesn't react to input.
Because that might be a bad idea.
Note that remote playlists still can use any protocol marked with
is_safe and is_network, because the case of http-hosted playlists
containing URLs using other streaming protocols is not unusual.
Until now, you had to use --load-unsafe-playlists or --playlist to get
playlists loaded. Change this and always load playlists by default.
This still attempts to reject unsafe URLs. For example, trying to invoke
libavdevice pseudo-demuxer is explicitly prevented. Local paths and any
http links (and some more) are always allowed.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Don't reconnect to the cache (since the cached stream already handles
reconnection). This is necessary, because since commit 0b428e44 the
"streaming" field (which also controls whether attempting to reconnect
makes sense at all) is inherited to the cache stream wrapper.
Also, let the stream reset its own position on reconnect. This removes
some assumptions and messy handling from the reconnect function.
Make sure the cache is dropped on reconnect. This takes care of
readjusting the stream position if necessary. (Also drop the cache on
DVB channel switching commands.)
Add the --cache-secs option, which literally overrides the value of
--demuxer-readahead-secs if the stream cache is active. The default
value is very high (10 seconds), which means it can act as network
cache.
Remove the old behavior of trying to pause once the byte cache runs
low. Instead, do something similar wit the demuxer cache. The nice
thing is that we can guess how many seconds of video it has cached,
and we can make better decisions. But for now, apply a relatively
naive heuristic: if the cache is below 0.5 secs, pause, and wait
until at least 2 secs are available.
Note that due to timestamp reordering, the estimated cached duration
of video might be inaccurate, depending on the file format. If the
file format has DTS, it's easy, otherwise the duration will seemingly
jump back and forth.
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
For remarks, pretty much see the manpage additions. Could help with
network streams that require too much seeking (maybe), or might be
extended to help with the use case of watching and downloading a file
at the same time.
In general, it might be a useless feature and could be removed again.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Usually, each stream driver declares the size and option list of its
private data. This was pretty natural for when most streams still used
global variables to setup their defaults. They did by pointing
priv_defaults to the (mutable) struct containing the option values. But
falls short when storing the option values in MPOpts. So provide a
somewhat inelegant but simple way to let the stream implementation setup
the priv struct at initialization time.
This is done with the get_defaults callback. It should return a copy of
the struct used in MPOpts. (A copy, because if MPOpts is changed, string
fields might be deallocated, and if that field is not described by
stream_info.options, it won't be copied on init.)
If a single person complains, I will readd it. But I don't expect that
this will happen.
The main reason for removing this is that it's some of the most unclean
code remaining, it's unmaintained, and I've never ever heard of someone
using it.
So, basically this worked only with streams that were not local files,
because stream_dvd.c "intercepts" local files to check whether they
point to DVD images. This means if a stream is not writeable, we have to
try the next stream implementation.
Unbreaks 2-pass encoding.
For some reason, we support writeable streams. (Only encoding uses that,
and the use of it looks messy enough that I want to replace it with FILE
or avio today.)
It's a chaos: most streams do not actually check the mode parameter like
they should. Simplify it, and let streams signal availability of write
mode by setting a flag in the stream info struct.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
This used global variables for the asynchronous interrupt callback.
Pick the simple and dumb solution and stuff the callback into
mpv_global. Do this because interrupt checking should also work in the
connect phase, and currently stream creation equates connecting.
Ideally, this would be passed to the stream on creation instead, or
connecting would be separated from creation. But since I don't know yet
which is better, and since moving stream/demuxer into their own thread
is something that will happen later, go with the mpv_global solution.
This is the only function which actually used the time argument of
stream_check_interrupt(). Considering that the whole player freezes
anyway, this is not worth the complication.
Also generally reduce the maximum wait time due to timeout. Introduce
exponential backoff, which makes the first reconnect retries faster, but
still waits up to 500ms in the later retries.
This commit introduces new stream protocols: bdnav(and others).
bdnav stream shares lots of codes with original bluray stream, so
it's not separated in different source file.
Major difference from bluray is that bdnav does not support longest
title because there is no way to query that information.
bdnav://menu and bdnav://first correspond to top menu title and
first play title respectively, though they often point same title.
Also, binary position based seeking has been removed, because it
didn't have no point.
This is probably ok. Probing could hit this case very often, since it'll
mean running this function on potentially binary data, but on the other
hand, probing usually uses a memory stream (to limit the amount of data
read), and memory streams have s->log silenced (details see
open_memory_stream()).
This simplifies the implementation and should make it more robust. For
example, we return an error if a line is longer than the provided buffer
(instead of splitting the line).
The code is much shorter, because now finding the new line and reading
characters is done in one go.
Streams like CDDA have special requirements in what quantities data can
be read: you can only read a sector at once, not more and not less. The
stream_peek() function didn't respect that and set less (used internal
buffer size of 2048 bytes, instead of CD sector size of 2352 bytes), so
no data was read and EOF was accidentally set, making playback with
cdda:// fail.
This is a regression since commit 9a723f, but that commit merely exposed
the issue (the redundant seek would clear the EOF flag).
Always pass around mp_log contexts in the option parser code. This of
course affects all users of this API as well.
In stream.c, pass a mp_null_log, because we can't do it properly yet.
This will be fixed later.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
