the title bar is now within the window bounds instead of outside. same
as QuickTime Player. it supports several standard styles, two dark and
two light ones. additionally we have properly rounded corners now and
the borderless window also has the proper window shadow.
Also make the earliest supported macOS version 10.10.
Fixes#4789, #3944
By blocking the VT switcher signal in the VO thread we get less races
and other oddities.
This gets rid of tearing (at least for me) when VT switching with
--gpu-context=drm.
crtc_setup gets called on VT reacquire as well as during normal setup. When
called during VT reacquire p->front_buf might not be 0, so the maths was wrong,
and could cause array OOB errors. Use mathematically correct (for negative
numbers) modulo to always pick the farthest away buffer (should work
even for larger values of BUF_COUNT).
The VT switcher was being set up, but it was being neither polled nor
interrupted.
Insert wait_events and wakeup functions based on those from vo_drm,
and add return early in drm_egl_swap_buffers if p->active isn't set.
This should get basic VT switching working, however there will likely
still be some random glitches. Switching between mpv and X11/weston is
unlikely to work satisfactorily until we can solve the problems with
drmSetMaster and drmDropMaster.
This introduces the option --drm-format (currently used only by
context_drm_egl, vo_drm implementation is pending) which allows you to
pick between a xrgb8888 or a xrgb2101010 visual for --gpu-context=drm.
Requires a recent mesa (18.0.0_rc4 or later) to work.
This also fixes a bug when using --gpu-context=drm on a 30bpp-enabled
mesa (allow_rgb10_configs set to true). Previously it would've set up
an XRGB8888 format at the DRM/GBM level, while a 30bpp EGLConfig would
be picked, resulting in a garbled image.
even though the fullscreen animation has a shorter duration than the
system wide animation (space sliding effect) there are still cases where
it takes longer, eg performance issues (especially on init). furthermore
the final size of the animation is usually different than the actual
fullscreen size because of spect ratio differences. the actual resize to
fullscreen is done automatically by cocoa itself when the actual
transition to fullscreen happens (system event). so it could happen that
the last animation resize happened after the actual resize to fullscreen
leading to a wrongly sized frame after entering fullscreen. to prevent
this we cancel the animation when entering fullscreen, we always set the
proper frame size when in fullscreen and discard any other frame sizes,
and to prevent some performance problems on init we push entering
fullscreen to the end of the main queue to execute it when most of the
init routines are done.
Fixes#5525
on live resize, eg async resize, the layer's bounds size is not in sync
with the actual surface size. this led to a wrongly sized frame and a
perceived flicker. get and use the actual surface size instead.
Mobius isn't well-defined for sig_peak <= 1.0. We can solve this by just
soft-clamping sig_peak to 1.0. Although, in this case, we can just skip
tone mapping altogether since the limit of mobius as sig_peak -> 1.0 is
just a linear function.
Based on testing with real-world non-HDR BT.2020 clips, clipping the
color space looks better than attempting to gamut map using a tone
mapping shader that's (by now) optimized for HDR content.
If anything, we'd have to develop a separate gamut mapping shader that
works in LCh space.
Do this because retrying reading on higher levels (like the demuxer)
usually causes tons of problems. A hack like this is simpler and could
allow to remove some of the higher level retry behavior.
This works by trying to detect whether the file is appended. If we reach
EOF, check if the file size changed compared to the initial value. If it
did, it means the file was appended at least once, and we set the
p->appending flag. If that flag is set, we simply retry reading more
data every time we encounter EOF. The only way to do this is polling,
and we poll for at most 10 times, after waiting for 200ms every time.
Just bail out immediately (and disable audio) if format probing has no
result, instead of doing nothing and then apparently freezing.
This can happen with bogus filters, cases where the first audio frame is
essentially dropped by filters (can happen with large resampling
factors), and if the audio track contains no packets at all, or all
packets fail to decode.
in certain circumstances the returned fbo for drawing is 0, but that
fbo is solely used internally by the CAOpenGLLayer for its drawing and
should never be used. in that case we fallback to 1 or the last used fbo
instead if it was not 0.
Fixes#5546
When pixels are non-square, the appropriate value of vo->monitor_par is
necessary to determine the destination rectangle, which in turn tells
how to scale the video along the x and y axis. Before this commit, the
drm driver only used --monitorpixelaspect. For example, to play a video
with the right aspect on a 4:3 screen and 640:400 pixels,
--monitorpixelaspect=5:6 had to be given.
With this commit, vo->monitor_par is determined from the size of the
screen in pixels and the --monitoraspect parameter. The latter is
usually easier to determine than --monitorpixelaspect, since it is
simply the proportion between the width and the height of the screen,
in most cases 16:9 or 4:3. If --monitoraspect is not given,
--monitorpixelaspect is used if given, otherwise pixel aspect is
assumed 1:1.
This solves a number of problems simultaneously:
1. When outputting HLG, this allows tuning the OOTF based on the display
characteristics.
2. When outputting PQ or other HDR curves, this allows soft-limiting the
output brightness using the tone mapping algorithm.
3. When outputting SDR, this allows HDR-in-SDR style output, by
controlling the output brightness directly.
Closes#5521
The HLG OOTF is defined as a one-parameter family of OOTFs depending on
the display's peak luminance. With the preceding change to OOTF scale
and handling, we no longer have any issues with outputting values in
whatever signal range we need.
So as a result, it's easy for us to support a tunable OOTF which may
(drastically) alter the display brightness. In fact, this is also the
only correct way to do it, because the HLG appearance depends strongly
on the OOTF configuration. For the OOTF, we consult the mastering
display's tagging (via src.sig_peak). For the inverse OOTF, we consult
the output display's target peak.
The primary need for this change is the fact that the OOTF was
incorrectly scaled, due to the fact that the application of the OOTF can
itself change the required normalization peak. (Plus, an oversight in
pass_inverse_ootf meant we forgot to normalize at the end of it)
The linearize/delinearize functions still normalize the scale since it's
used in a number of places throughout gpu/video.c, but the color
management function now converts to absolute scale right away, instead
of in an awkward way inside the tone mapping branch. The OOTF functions
now work in absolute scale only.
In addition, minor changes have been made to the way normalization is
handled for tone mapping - we now divide out the dst_peak *after* peak
detection, in order to make the scale of the peak detection buffer
consistent even if the dst_peak were to (hypothetically) change
mid-stream. In theory, we could also do this for desaturation, but doing
the desaturation before tone mapping has the advantage of preserving
much more brightness than the other way around - and even mid-stream
changes are not that drastic here.
Finally, some preparation work has been done for allowing the user to
customize the `dst.sig_peak` in the future.
drawing off-screen failed because we didn't have a valid context. the
problem is we force off-screen drawing because the CAOpenGLLayer refuses
to draw anything while being off-screen. set the current context before
starting to draw anything off-screen.
Fixes#5530
This fixes playback stalls on some mediacodec hardware decoders,
which expect that frame buffers will be rendered and returned back
to the decoder as soon as possible.
Specifically, the issue was observed on an NVidia SHIELD Android TV,
only when playing an H264 sample which switched between interlaced
and non-interlaced frames. On an interlacing change, the decoder
expects all outstanding frames would be returned to it before it
would emit any new frames. Since a single extra frame always remained
buffered by mpv, playback would stall. After this commit, no extra
frames are buffered by mpv when using vo_mediacodec_embed.
Coverity complained about the redundant init of hratio etc. - just
remove that and merge declaration/init of these variables. Also the
first double cast in each expression is unnecessary.
The rest of the function should be executed only if both are set. It
seems like in practice this didn't happen yet with only one of them
unset, but in theory it's possible. Found by Coverity.
the CVDisplayLinkSetOutputHandler function introduced with 10.11 is
broken on the very same version of the OS, which caused our render loop
never to start. fallback to the old display link callback on 10.11.
for reference the radar http://www.openradar.me/26640780Fixes#5527
the swift object file wasn't linked when libmpv was linked, which
resulted in a missing symbol error. add the swift object to the linking
list for libmpv too.
Fixes#5522
for convenience reasons i used strings for subprocess commands instead
of command lists, which made it mandatory to use a shell. for security
reasons, among others, we removed the shell usage and converted the
commands to actual command lists.
c82fed8 fixed the detection with python3 but broke it on python2. the
decode function on python2 converts the str to unicode which causes
problems when concatenating to str when building. instead of decoding
the output we change the subprocess to operate in text mode.
also use check_output instead of Popen for simplicity.
Usable for uniquely identifying mpv instances from
subprocesses, controlling mpv with AppleScript, ...
Adds a new mp_getpid() wrapper for cross-platform reasons.
There is now a better way. Reading the font framebuffer was always a
hack. The new code via VOCTRL_SCREENSHOT renders it into a FBO, which
does not come with the disadvantages of reading the front buffer (like
not being supported by GLES, possibly black regions due to overlapping
windows on some systems).
For now keep VOCTRL_SCREENSHOT_WIN on the VO level, because there are
still some lesser VOs and backends that use it.
Also print type and help string. Also print AV_OPT_TYPE_CONST, which are
like the mpv choice option type, except different. Print them as
separate lines because FFmpeg usually has help strings for them too.
Most options starting with --no-<name> are automatically translated to
--<name>=no. Make the code slightly nicer by using a flag instead of
explicitly comparing option types. Also fix an issue that made the
option parser print nonsense error messages for if --no-... was used for
options which don't support it.
This should be helpful for the new OSX Cocoa backend, which uses
opengl-cb internally. Since it comes with a behavior change that could
possibly interfere with libmpv/opengl_cb users, we mark it as explicit
API change.
This includes codec/muxer/demuxer iteration (different iteration
function, registration functions deprecated), and the renaming of
AVFormatContext.filename to url (plus making it a malloced string).
Libav doesn't have the new API yet, so it will break. I hope they will
add the new APIs too.
There was the following problem: if a filter graph had asynchronous
filters, and the filter graph user did not call mp_filter_run() (and
only accessed the mp_pins), then filtering could stall, because using
mp_pin_out_request_data() only recursively invoked filtering if the
data_requested flag wasn't already set. The latter can happen if a
request was tried earlier but failed, and then an asynchronous filter
actually produced output that would satisfy the request. Obviously, it
has to invoke filtering again to get the requested frame.
Fix this by organizing the code differently, and making sure to invoke
mp_filter_run() on every request (if there's nothing to do, it doesn't
do anything anyway). Simplify it a bit by removing things which are not
needed, like connecting filter graphs with different root filters.
Reduce backward/forward from 400MB/400MB to 50MB/150MB. Too many
complaints about high memory usage.
Note that external tracks (like ytdl DASH with external audio tracks)
will double the amounts, because an external track uses its own demuxer
and cache.
Avoids that the audio decoder shows up with a "[root/ad]" log prefix.
This is an annoying consequence of mp_log_new(): if a log parent doesn't
have a prefix with "!", it'll add the prefix to all mp_logs created from
it. This should probably be fixed in the mp_log code itself, but doing
so would be a big deal as we'd have to make sure all the other log
prefixes are what we want. So work it around for now.
This switches the default away from "bob" to the best algorithm reported
as supported by the driver. This is convenient for users, and there is
no reason to use something worse by default.
Untested.
Before this, we made deinterlacing dependent on the video codec metadata
(AVFrame.interlaced_frame for libavcodec). So even if --deinterlace=yes
was set, we skipped deinterlacing if the flag wasn't set. This is very
unreliable and there are many streams with flags incorrectly set.
The potential problem is that this might upset people who alwase enabled
deinterlace and hoped it worked. But it's likely these people were
screwed by this setting anyway. The new behavior is less tricky and
easier to understand, and this preferable. Maybe one day we could
introduce a --deinterlace=auto, which does the right thing, but of
course this would be hard to implement (esecially with hwdec).
Fixes#5219.
