...instead of relying on the hw decoding API to align it for us. The old
method could in theory have gone wrong if the video is cropped by an
amount large enough to step over several blocks.
There's not much of a reason to keep get_surface_hwdec() and
get_buffer2_hwdec() separate. Actually, the way the mpi->AVFrame
referencing is done makes this confusing. The separation is probably
an artifact of the pre-libavcodec-refcounting compatibility glue.
Most of hardware decoding is initialized lazily. When the first packet
is parsed, libavcodec will call get_format() to check whether hw or sw
decoding is wanted. Until now, we've returned AV_PIX_FMT_NONE from
get_format() if hw decoder initialization failed. This caused the
avcodec_decode_video2() call to fail, which in turn let us trigger the
fallback. We didn't return a sw format from get_format(), because we
didn't want to continue decoding at all. (The reason being that full
reinitialization is more robust when continuing sw decoding.)
This has some disadvantages. libavcodec vomited some unwanted error
messages. Sometimes the failures are more severe, like it happened with
HEVC. In this case, the error code path simply acted up in a way that
was extremely inconvenient (and had to be fixed by myself). In general,
libavcodec is not designed to fallback this way.
Make it a bit less violent from the API usage point of view. Return a sw
format if hw decoder initialization fails. In this case, we let
get_buffer2() call avcodec_default_get_buffer2() as well. libavcodec is
allowed to perform its own sw fallback. But once the decode function
returns, we do the full reinitialization we wanted to do.
The result is that the fallback is more robust, and doesn't trigger any
decoder error codepaths or messages either. Change our own fallback
message to a warning, since there are no other messages with error
severity anymore.
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
Codecs for hardware acceleration are not blacklisted, but whitelisted.
Also, if this emssage is printed, the codec might not have any hardware
acceleration support in the first place.
Instead of "vaapi", simply by changing the probe order.
"vaapi" uses the GLX GL interop, which has causing us more problems than
it solved.
Unfortunately this leads also to copying if "--hwdec=auto --vo=vaapi" is
used, even though GLX is not involved in this case - but I don't care
enough to make the probe logic cleverer just for this. You can still get
the zero-copy path with --hwdec=vaapi.
Breaks vo_opengl by default. I'm hot able to fix this myself, because I
have no clue about the overcomplicated color management logic. Also,
whilethis is apparently caused by commit fbacd5, the following commits
all depend on it, so revert them too.
This reverts the following commits:
e141caa97d653b0dd529729c8b3f64fbacd5de31Fixes#1636.
Remove coded_width and coded_height. This was originally added in commit
fd7dde40, when BITMAPINFOHEADER was killed. The separate fields became
redundant in commit e68f4be1. Remove them (nothing passed to the
decoders actually changes with _this_ commit).
A recent behavior change in libavcodec's h264 decoder keeps at least 1
surface even after avcodec_flush_buffers() has been called. We used to
flush the decoder in order to make sure all surfaces are free'd, so that
the hw decoder can be safely uninitialized. This doesn't work anymore.
Fix it by closing the AVCodecContext before the hw decoder is
uninitialized. This is actually simpler and more robust. It seems to be
well-supported too.
Fixes invalid read accesses with vaapi-copy and dxva2-copy. These
destroyed the hwdec API fully on uninit, and could not deal with
surfaces surviving the decoder.
Probably fixes#1587.
The intention is that we can test vo_opengl with high bit depth PNGs
better. This throws libswscale completely out of the loop, which before
was needed in order to convert from big endian to little endian.
Also apply a minimal cleanup to fmt-conversion.c (unrelated).
This was once central, but now it's almost unused. Only vf_divtc still
uses it for extremely weird and incomprehensible reasons. The use in
stream.c is trivial. Replace these, and remove mpbswap.h.
MPlayer traditionally did this because it made sense: the most important
formats (avi, asf/wmv) used Microsoft formats, and many important
decoders (win32 binary codecs) also did. But the world has changed, and
I've always wanted to get rid of this thing from the codebase.
demux_mkv.c internally still uses it, because, guess what, Matroska has
a VfW muxing mode, which uses these data structures natively.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
So talking to a certain Intel dev, it sounded like modern VA-API drivers
are reasonable thread-safe. But apparently that is not the case. Not at
all. So add approximate locking around all vaapi API calls.
The problem appeared once we moved decoding and display to different
threads. That means the "vaapi-copy" mode was unaffected, but decoding
with vo_vaapi or vo_opengl lead to random crashes.
Untested on real Intel hardware. With the vdpau emulation, it seems to
work fine - but actually it worked fine even before this commit, because
vdpau was written and designed not by morons, but competent people
(vdpau is guaranteed to be fully thread-safe).
There is some probability that this commit doesn't fix things entirely.
One problem is that locking might not be complete. For one, libavcodec
_also_ accesses vaapi, so we have to rely on our own guesses how and
when lavc uses vaapi (since we disable multithreading when doing hw
decoding, our guess should be relatively good, but it's still a lavc
implementation detail). One other reason that this commit might not
help is Intel's amazing potential to fuckup anything that is good and
holy.
Completely useless, and could accidentally be enabled by cycling
framedrop modes. Just get rid of it.
But still allow triggering the old code with --vd-lavc-framedrop, in
case someone asks for it. If nobody does, this new option will be
removed eventually.
Use OPT_KEYVALUELIST() for all places where AVOptions are directly set
from mpv command line options. This allows escaping values, better
diagnostics (also no more "pal"), and somehow reduces code size.
Remove the old crappy option parser (av_opts.c).
This add support for reading primary information from lavc, categorized
into BT.601-525, BT.601-625, BT.709 and BT.2020; and passes it on to the
vo. In vo_opengl, we always generate the 3dlut against the wider BT.2020
and transform our source into this colorspace in the shader.
Until now, failure to allocate image data resulted in a crash (i.e.
abort() was called). This was intentional, because it's pretty silly to
degrade playback, and in almost all situations, the OOM will probably
kill you anyway. (And then there's the standard Linux overcommit
behavior, which also will kill you at some point.)
But I changed my opinion, so here we go. This change does not affect
_all_ memory allocations, just image data. Now in most failure cases,
the output will just be skipped. For video filters, this coincidentally
means that failure is treated as EOF (because the playback core assumes
EOF if nothing comes out of the video filter chain). In other
situations, output might be in some way degraded, like skipping frames,
not scaling OSD, and such.
Functions whose return values changed semantics:
mp_image_alloc
mp_image_new_copy
mp_image_new_ref
mp_image_make_writeable
mp_image_setrefp
mp_image_to_av_frame_and_unref
mp_image_from_av_frame
mp_image_new_external_ref
mp_image_new_custom_ref
mp_image_pool_make_writeable
mp_image_pool_get
mp_image_pool_new_copy
mp_vdpau_mixed_frame_create
vf_alloc_out_image
vf_make_out_image_writeable
glGetWindowScreenshot
This means use of the min/max fields can be dropped for the flag option
type, which makes some things slightly easier. I'm also not sure if the
client API handled the case of flag not being 0 or 1 correctly, and this
change gets rid of this concern.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
mpv supports two hardware decoding APIs on Linux: vdpau and vaapi. Each
of these has emulation wrappers. The wrappers are usually slower and
have fewer features than their native opposites. In particular the libva
vdpau driver is practically unmaintained.
Check the vendor string and print a warning if emulation is detected.
Checking vendor strings is a very stupid thing to do, but I find the
thought of people using an emulated API for no reason worse.
Also, make --hwdec=auto never use an API that is detected as emulated.
This doesn't work quite right yet, because once one API is loaded,
vo_opengl doesn't unload it, so no hardware decoding will be used if the
first probed API (usually vdpau) is rejected. But good enough.
Instead of doing it on every seek (libavcodec calls get_format on every
seek), reinitialize the decoder only if the video resolution changes.
Note that this may be relatively naive, since we e.g. (or: in
particular) don't check for profile changes. But it's not worse than the
state before the get_format change, and at least it paints over the
current vaapi breakage (issue #646).
This "sometimes" crashed when seeking. The fault apparently lies in
libavcodec: the decoder returns an unreferenced frame! This is
completely insane, but somehow I'm apparently still expected to
work this around. As a reaction, I will drop Libav 9 support in the
next commit. (While this commit will go into release/0.3.)
Apparently the "right" place to initialize the hardware decoder is in
the libavcodec get_format callback.
This doesn't change vda.c and vdpau_old.c, because I don't have OSX, and
vdpau_old.c is probably going to be removed soon (if Libav ever manages
to release Libav 10). So for now the init_decoder callback added with
this commit is optional.
This also means vdpau.c and vaapi.c don't have to manage and check the
image parameters anymore.
This change is probably needed for when libavcodec VDA supports gets a
new iteration of its API.