The default values for --ao, --vo, --gpu-api, --gpu-context change from
time to time, but some libmpv clients rely on the existing autoprobe order
and breaks as a result when the value changes. This specifies that the
default autoprobe order should not be relied upon.
This allows users to set buffer duration in exclusive mode. We have
been using the default device period as the buffer size and it is
robust enough in most cases. However, on some devices there are
horrible glitches after a stream reset. Unfortunately, the issue is not
consistently reproducible, but using a smaller buffer size (e.g., the
minimum device period) seems to resolve the problem.
Fixes#13715.
All other ao options are documented there so make ALSA the same.
Also remove the (Linux only) wording since some systems (e.g. FreeBSD)
provide compatibility layer for it.
--ao=pipewire has been preferred on Linux for a long time, and this note
even makes it sound like alsa is preferred on any system. Just say that
the print order is the order in which the drivers are tried so this note
won't have to be updated again in the future, like --gpu-context's
documentation does.
PipeWire supports a global volume control for streams that works on top
of the per-channel volumes.
As mpv only supports a single volume with ao-volume it can make sense to
use the single global volume from PipeWire for it.
This allows the user to also specify per-channel volumes and not have
mpv trample over them.
This mode is not the default as pulseaudio does not support this
global volume control and all tooling controlling PipeWire via
pipewire-pulse (like pavucontrol) will not be able to see this channel.
Changes:
- rewrite to use new internal MPV API;
- code refactoring;
- fix buffers size calculations;
- buffer set to auto;
- reset() - clean/reinit device only after errors;
The AO provides a way for mpv to directly submit audio to the PipeWire
audio server.
Doing this directly instead of going through the various compatibility
layers provided by PipeWire has the following advantages:
* It reduces complexity of going through the compatibility layers
* It allows a richer integration between mpv and PipeWire
(for example for metadata)
* Some users report issues with the compatibility layers that to not
occur with the native AO
For now the AO is ordered after all the other relevant AOs, so it will
most probably not be picked up by default.
This is for the following reasons:
* Currently it is not possible to detect if the PipeWire daemon that mpv
connects to is actually driving the system audio.
(https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/1835)
* It gives the AO time to stabilize before it is used by everyone.
Based-on-patch-by: Oschowa <oschowa@web.de>
Based-on-patch-by: Andreas Kempf <aakempf@gmail.com>
Helped-by: Ivan <etircopyhdot@gmail.com>
The audio rewrite in d27ad96542 originally
broke this ao. However, 0ac724f002 fixed
and the documentation was never updated to reflect that. OpenAL has
worked fine for a while not. Just remove this sentence.
Changes:
- code refactored;
- mixer options removed;
- new mpv sound API used;
- add sound devices detect (mpv --audio-device=help will show all available devices);
- only OSSv4 supported now;
Tested on FreeBSD 12.2 amd64.
Apple has decided that Mac OS X is now named macOS for the time
being. For consistency, it makes sense to use the same name for the
operating system in all places where it occurs. This commit renames
OS X to macOS in the documentation in places where it was otherwise
still using the old name.
This affects "pull" AOs only: ao_alsa, ao_pulse, ao_openal, ao_pcm,
ao_lavc. There are changes to the other AOs too, but that's only about
renaming ao_driver.resume to ao_driver.start.
ao_openal is broken because I didn't manage to fix it, so it exits with
an error message. If you want it, why don't _you_ put effort into it? I
see no reason to waste my own precious lifetime over this (I realize the
irony).
ao_alsa loses the poll() mechanism, but it was mostly broken and didn't
really do what it was supposed to. There doesn't seem to be anything in
the ALSA API to watch the playback status without polling (unless you
want to use raw UNIX signals).
No idea if ao_pulse is correct, or whether it's subtly broken now. There
is no documentation, so I can't tell what is correct, without reverse
engineering the whole project. I recommend using ALSA.
This was supposed to be just a simple fix, but somehow it expanded scope
like a train wreck. Very high chance of regressions, but probably only
for the AOs listed above. The rest you can figure out from reading the
diff.
Ancient Linux audio output. Apparently it survived until now, because
some BSDs (but not all) had use of this. But these should work with
ao_sdl or ao_openal too (that's why these AOs exist after all). ao_oss
itself has the problem that it's virtually unmaintainable from my point
of view due to all the subtle (or non-subtle) difference. Look at the
ifdef mess and the multiple code paths (that shouldn't exist) in the
removed source code.
I wonder what this even is. I've never heard of anyone using it, and
can't find a corresponding library that actually builds with it. Good
enough to remove.
It was always marked as "experimental", and had inherent problems that
were never fixed. It was disabled by default, and I don't think anyone
is using it.
This flag makes mpv continue using the PulseAudio driver even if the
sink is suspended.
This can be useful if JACK is running with PulseAudio in bridge mode and
the sink-input assigned to mpv is the one JACK controls, thus being
suspended.
By forcing mpv to still use PulseAudio in this case, the user can now
adjust the sink to an unsuspended one.
One can now set the number of buffers and the buffer size.
This can reduce the CPU usage and the total latency stays mostly the same.
As there are sync mechanisms the A/V sync continue intact and working.
It also modifies 6.1 channel order, as per OpenAL spec
and add AOPLAY_FINAL_CHUNK support
Uses OpenAL Soft's AL_DIRECT_CHANNELS_SOFT extension and can be controlled through
a new CLI option, --openal-direct-channels.
This allows one to send the audio data direrctly to the desired channel without
effects applied.
Completely untested (rsound dev libs unavailable on my system). Trivial
enough that it's very likely that it'll just work. No port selection,
but could be added by parsing it as part of the device name.
Should fix#4714.
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
And introduce a global option which does this. Or more precisely, this
deprecates the global wasapi and coreaudio options, and adds a new one
that merges their functionality. (Due to the way the sub-option
deprecation mechanism works, this is simpler.)
Instead of requiring each VO or AO to manually add members to MPOpts and
the global option table, make it possible to register them automatically
via vo_driver/ao_driver.global_opts members. This avoids modifying
options.c/options.h every time, including having to duplicate the exact
ifdeffery used to enable a driver.
Positional parameters cause problems because they can be ambiguous with
flag options. If a flag option is removed or turned into a non-flag
option, it'll usually be interpreted as value for the first sub-option
(as positional parameter), resulting in very confusing error messages.
This changes it into a simple "option not found" error.
I don't expect that anyone really used positional parameters with --vo
or --ao. Although the docs for --ao=pulse seem to encourage positional
parameters for the host/sink options, which means it could possibly
annoy some PulseAudio users.
--vf and --af are still mostly used with positional parameters, so this
must be a configurable option in the option parser.
It existed for XP-compatibility only. There was also a time where
ao_wasapi caused issues, but we're relatively confident that ao_wasapi
works better or at least as good as ao_dsound on Windows Vista and
later.
Until now, this was for AC3 only. For PCM, we used AudioUnit in
ao_coreaudio, and the only reason ao_coreaudio_exclusive exists
is that there is no other way to passthrough AC3.
PCM support is actually rather simple. The most complicated
issue is that modern OS X versions actually do not support
copying through the data; instead everything must go through
float. So we have to deal with virtual and physical format
being different, which causes some complications.
This possibly also doesn't support some other things correctly.
For one, if the device allows non-interleaved output only, we
will probably fail. (I couldn't test it, so I don't even know
what is required. Supporting it would probably be rather
simple, and we already do it with AudioUnit.)
ao_coreaudio uses AudioUnit - the OSX software mixer. In theory, it
supports multichannel audio just fine. But in practice, this might be
disabled by default, and the user is supposed to select a multichannel
base format in the "Audio MIDI Setup" utility.
This option attempts to change this setting automatically. Some possible
disadvantages and caveats are listed in the manpage additions. It is off
by default, since changing this might be rather bad behavior for a
normal application.
nanahi
sunpenghao
Misaki Kasumi
sfan5
Guido Cella
Thomas Weißschuh
Jakub Wilk
rim
Ivan
Dudemanguy
Leo Izen
Jan Beich
wm4
Térence Clastres
LAGonauta
Bisaloo
Martin Herkt
Ellis Berner