RepoMirrors/mpv
1
0
Fork 0
mirror of https://github.com/mpv-player/mpv synced 2024-12-29 10:32:15 +00:00
Code Issues Releases Wiki Activity
88762cd6a7
mpv/player/core.h

494 lines
18 KiB
C
Raw Normal View History

Add license header to all top-level files missing them. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30471 b3059339-0415-0410-9bf9-f77b7e298cf2
2010-01-30 23:24:23 +00:00
/*
* This file is part of MPlayer.
*
* MPlayer is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* MPlayer is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with MPlayer; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
Add MPLAYER_ prefix to multiple inclusion guards. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26061 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-02-22 09:09:46 +00:00
#ifndef MPLAYER_MP_CORE_H
#define MPLAYER_MP_CORE_H
Add multiple inclusion guards to all header files that lack them. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25581 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-01-01 21:35:58 +00:00
core: Rewrite some of the A/V sync related code Notable functionality changes: * Timing change between any two frames is now accurately limited to 1/10 of their nominal distance. Previous code did not always use the correct duration. * The status line now keeps showing the same A-V sync value from one video frame change to the next. Previously it kept recalculating the value using a new audio position but the same video position when the status line was updated between video frames. This incorrectly showed the video losing sync with audio. * The status line now displays actual measured A-V difference in autosync mode too. The previous code displayed values that completely ignored real timing in autosync mode, showing 0 A-V difference even when video was significantly behind audio due to inadequate decoding speed. The new behavior can make the shown A-V values appear more unstable if the audio out has unreliable delay measurements (the most likely reason to use autosync), but this is a display change rather than a timing quality change. * Autosync mode now tries to adjust timing by the amount of time vo_flip() calls take, so the calls start earlier and finish at the time the frame should be shown. Previously non-autosync mode adjusted for this but autosync did not. * The warning about the system being too slow to decode the video in realtime is now displayed in autosync mode too.
2008-12-08 18:04:08 +00:00
#include <stdbool.h>
client API: add events for video and audio reconfig
2014-02-17 01:52:26 +00:00
#include "libmpv/client.h"
Split mpvcore/ into common/, misc/, bstr/
2013-12-17 01:39:45 +00:00
#include "common/common.h"
Move options/config related files from mpvcore/ to options/ Since m_option.h and options.h are extremely often included, a lot of files have to be changed. Moving path.c/h to options/ is a bit questionable, but since this is mainly about access to config files (which are also handled in options/), it's probably ok.
2013-12-17 01:02:25 +00:00
#include "options/options.h"
sub: uglify OSD code path with locking Do two things: 1. add locking to struct osd_state 2. make struct osd_state opaque While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses lots of osd_state (and osd_object) members. To make sure everything is accessed synchronously, I prefer making osd_state opaque, even if it means adding pretty dumb accessors. All of this is meant to allow running VO in their own threads. Eventually, VOs will request OSD on their own, which means osd_state will be accessed from foreign threads.
2014-01-18 00:19:20 +00:00
#include "sub/osd.h"
Split osd related stuff from mp_core.h into new header file mp_osd.h. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25931 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-01-30 07:21:05 +00:00
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
// definitions used internally by the core player code
core: Clean up move-to-next-file logic The mpctx->eof field was used to also store other reasons to stop playing the current file besides EOF, and the code didn't properly distinguish those from EOF. Rename the field to "stop_play" and clean up some of the code accessing it. Properly separating EOF from other reasons allows handling file switching better. Before this commit buffered audio was always drained before moving to the next file (the only exception when it was NOT drained when stopping a file was when quitting the player completely). This added an extra delay when manually moving to the next file as you had to wait for the currently buffered audio to finish playing before the next file would start. After this commit audio is only drained if the file reaches EOF normally; otherwise audio is cut and the next file starts immediately.
2008-08-13 05:06:26 +00:00
enum stop_play_reason {
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
KEEP_PLAYING = 0, // must be 0, numeric values of others do not matter
mplayer: attempt to skip playlist entries which can't be played This is for situations when repeated attempts at playing a playlist entry failed, and playlist navigation becomes impossible due to that. For example, it wasn't possible to skip backwards past an unplayable playlist entry: mpv file1.mkv doesntexist.mkv file3.mkv You couldn't skip back to file1.mkv from file3.mkv. When running a single "playlist_prev" command, doesntexist.mkv would be played, which would fail to load. As reaction to the failure to load it, the next file would be played, which is file3.mkv. To make this even worse, the file could successfully load, but run only for a split second. So just loading successfully isn't good enough. Attempt to solve this by marking problematic playlist entries as failed, and by having playlist_prev skip past such playlist entries. We define failure as not being able to play more than 3 seconds (or failing to initialize to begin with). (The 3 seconds are in real time, not file duration.) "playlist_prev force" still exhibits the old behavior. Additionally, use the same mechanism to prevent pointless infinite reloading if none of the files on the playlist exist. (See github issue All in all, this is a heuristic, and later adjustments might be necessary. Note: forward skips (playlist_next) are not affected at all. (Except for the interaction with --loop.)
2013-09-15 03:03:37 +00:00
AT_END_OF_FILE, // file has ended, prepare to play next
// also returned on unrecoverable playback errors
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
PT_NEXT_ENTRY, // prepare to play next entry in playlist
PT_CURRENT_ENTRY, // prepare to play mpctx->playlist->current
PT_STOP, // stop playback, clear playlist
Add prelimimary (basic, possibly broken) dvdnav support This readds a more or less completely new dvdnav implementation, though it's based on the code from before commit 41fbcee. Note that this is rather basic, and might be broken or not quite usable in many cases. Most importantly, navigation highlights are not correctly implemented. This would require changes in the FFmpeg dvdsub decoder (to apply a different internal CLUT), so supporting it is not really possible right now. And in fact, I don't think I ever want to support it, because it's a very small gain for a lot of work. Instead, mpv will display fake highlights, which are an approximate bounding box around the real highlights. Some things like mouse input or switching audio/subtitles stream using the dvdnav VM are not supported. Might be quite fragile on transitions: if dvdnav initiates a transition, and doesn't give us enough mpeg data to initialize video playback, the player will just quit. This is added only because some users seem to want it. I don't intend to make mpv a good DVD player, so the very basic minimum will have to do. How about you just convert your DVD to proper video files?
2013-12-12 00:44:28 +00:00
PT_RELOAD_DEMUXER, // restart playback, but keep stream open
mplayer: never exit mplayer from within the play loop The only place exit_player() should be called is the main() function. exit_player() should be the only function allowed to call exit(). This makes it easier to guarantee proper deinitialization, and allows using the --leak-report flag without showing false positives. The quit slave command now sets a flag only. It uses the same mechanism that's normally used to advance to the next file on the playlist, so the rest of the playback path should be able to react to the quit command quickly enough. That is, the player should react just as fast to quit requests in practice as before this commit. In reinit_audio_chain(), the player was actually exited if init_audio_filters() failed. Reuse the normal error handling path to handle this condition.
2012-08-04 01:46:11 +00:00
PT_QUIT, // stop playback, quit player
client API: better error reporting Give somewhat more information on playback failure.
2014-10-28 15:19:07 +00:00
PT_ERROR, // play next playlist entry (due to an error)
core: Clean up move-to-next-file logic The mpctx->eof field was used to also store other reasons to stop playing the current file besides EOF, and the code didn't properly distinguish those from EOF. Rename the field to "stop_play" and clean up some of the code accessing it. Properly separating EOF from other reasons allows handling file switching better. Before this commit buffered audio was always drained before moving to the next file (the only exception when it was NOT drained when stopping a file was when quitting the player completely). This added an extra delay when manually moving to the next file as you had to wait for the currently buffered audio to finish playing before the next file would start. After this commit audio is only drained if the file reaches EOF normally; otherwise audio is cut and the next file starts immediately.
2008-08-13 05:06:26 +00:00
};
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
Initial ordered chapters support Add basic support for Matroska ordered chapters. The switching between segments is implemented as a general edit timeline that could also be used for other purposes. Some things still need improvement. In particular the current code does not try to do any proper mapping between audio/video/subtitle streams of different files and there should be options for better control of how MPlayer searches other files for the required content.
2009-03-29 19:45:06 +00:00
struct timeline_part {
double start;
double source_start;
core, timeline: don't keep separate stream field The timeline code kept pairs of stream and demuxer references around. The reference to the stream is redundant, because it can be accessed through the demuxer. Simplify the code by removing the redundant stream reference. Also, set mpctx->stream to the current segment when using timeline. Fix a small memory leak in tl_matroska.c introduced earlier.
2012-08-19 15:58:58 +00:00
struct demuxer *source;
Initial ordered chapters support Add basic support for Matroska ordered chapters. The switching between segments is implemented as a general edit timeline that could also be used for other purposes. Some things still need improvement. In particular the current code does not try to do any proper mapping between audio/video/subtitle streams of different files and there should be options for better control of how MPlayer searches other files for the required content.
2009-03-29 19:45:06 +00:00
};
commands: more user-control whether a command shows OSD bars/messages The "no-osd" prefix was introduced earlier to disable OSD selectively based on the key binding. Extend this, and allow the user to force display of an OSD bar ("osd-bar"), OSD message ("osd-msg") or both ("osd-msg-bar"). This changes mainly how property setting functions behave. The default behavior is still the same.
2012-09-25 01:24:38 +00:00
enum mp_osd_seek_info {
OSD_SEEK_INFO_BAR = 1,
OSD_SEEK_INFO_TEXT = 2,
OSD_SEEK_INFO_CHAPTER_TEXT = 4,
OSD_SEEK_INFO_EDITION = 8,
player: make the osd-msg prefix work for playlist_next/prev If input.conf e.g. contains "n osd-msg playlist_next", then pressing the n key will switch to the next file, and display the filename on OSD.
2014-11-11 21:07:16 +00:00
OSD_SEEK_INFO_CURRENT_FILE = 16,
commands: more user-control whether a command shows OSD bars/messages The "no-osd" prefix was introduced earlier to disable OSD selectively based on the key binding. Extend this, and allow the user to force display of an OSD bar ("osd-bar"), OSD message ("osd-msg") or both ("osd-msg-bar"). This changes mainly how property setting functions behave. The default behavior is still the same.
2012-09-25 01:24:38 +00:00
};
player: merge mp_osd.h into mp_core.h Just doing this because mp_osd.h and osd.c is not consistent. There are some other header files (command.h and screenshot.h), but since I don't feel too good about inflating mp_core.h, I'm not merging them, at least not yet.
2013-10-30 20:47:14 +00:00
enum {
// other constants
MAX_OSD_LEVEL = 3,
OSD_LEVEL_INVISIBLE = 4,
OSD_BAR_SEEK = 256,
player: move video display code out of the playloop Basically move the code from playloop.c to video.c. The new function write_video() now contains the code that was part of run_playloop(). There are no functional changes, except handling "new_frame_shown" slightly differently. This is done so that we don't need new a new MPContext field or a return value for write_video() to signal this condition. Instead, it's handled indirectly.
2014-07-30 21:24:08 +00:00
MAX_NUM_VO_PTS = 100,
player: merge mp_osd.h into mp_core.h Just doing this because mp_osd.h and osd.c is not consistent. There are some other header files (command.h and screenshot.h), but since I don't feel too good about inflating mp_core.h, I'm not merging them, at least not yet.
2013-10-30 20:47:14 +00:00
};
mp_core: declare seek_type enum outside of nested struct cosmetic change. See previous commit.
2013-08-19 20:29:55 +00:00
enum seek_type {
MPSEEK_NONE = 0,
MPSEEK_RELATIVE,
MPSEEK_ABSOLUTE,
MPSEEK_FACTOR,
};
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
struct track {
enum stream_type type;
player: redo demuxer stream selection Use struct track to decide what stream to select. Add a "selected" field and use that in some places instead of checking mpctx->current_track.
2013-12-23 19:14:54 +00:00
// Currently used for decoding.
bool selected;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
// The type specific ID, also called aid (audio), sid (subs), vid (video).
// For UI purposes only; this ID doesn't have anything to do with any
// IDs coming from demuxers or container files.
int user_tid;
player: add stream selection by ffmpeg index Apparently using the stream index is the best way to refer to the same streams across multiple FFmpeg-using programs, even if the stream index itself is rarely meaningful in any way. For Matroska, there are some possible problems, depending how FFmpeg actually adds streams. Normally they seem to match though.
2014-10-21 11:16:48 +00:00
int demuxer_id; // same as stream->demuxer_id. -1 if not set.
int ff_index; // same as stream->ff_index, or 0.
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
char *title;
bool default_track;
core: allow disabling display of "album art" in audio files ffmpeg pretends that image attachments (such as contained in ID3v2 metadata) are video streams. It injects the attached pictures as packets into the packet stream received with av_read_frame(). Add the --audio-display option to allow configuring whether attached pictures should be displayed. The default behavior doesn't change (images are displayed). Identify video streams, that are actually image attachments, with "[P]" in the terminal output. Modify the default stream selection such that real video streams are preferred over attached pictures. (This is just for robustness; I do not know of any samples where images are added before actual video streams and could lead to bad default stream selection with the old code.)
2012-12-10 17:52:06 +00:00
bool attached_picture;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
char *lang;
// If this track is from an external file (e.g. subtitle file).
bool is_external;
player: don't select subtitles added from quvi by default Quvi subtitles are considered external subtitles (simply because they're separate from the audio/video stream), but for the sake of subtitle auto-selection, they should not be considered external. Change this so that quvi subtitles are treated like muxed subtitles (with default flag never set). This means subtitles won't be selected by default, unless explicitly requested with --sid or --slang.
2014-01-05 15:15:30 +00:00
bool no_default; // pretend it's not external for auto-selection
command: add sub_reload and sub_remove commands sub_remove remove an external subtitle track, for whatever this may be needed. sub_reload removes and re-adds an external subtitle track. Also rename sub_load to sub_add, because that seems to be more in line with sub_remove.
2012-11-15 19:26:52 +00:00
char *external_filename;
mplayer: prefer -sub/-subfile subs over auto-loaded subs Before this commit, it was more or less random which subtitle was preferred if there was both an auto-loaded external subtitle, and a subtitle loaded via -sub or -subfile. -sub subtitles happened to be preferred over auto-loaded subs, while -subfile didn't. Fix the -subfile case, and make the behavior consistent by making the selection behavior explicit.
2013-04-20 21:48:26 +00:00
bool auto_loaded;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
// If the track's stream changes with the timeline (ordered chapters).
bool under_timeline;
player: fix regression with ordered chapters Broken by commit 1301a907. This commit added demuxer threading, and changed some other things to make them simpler and more orthogonal. One of these things was ntofications about streams that appear during playback. That's an obscure corner case, but the change made handling of it as natural as normal initialization. This didn't work for two reasons: 1. When playing an ordered chapters file where the initial segment was not from the main file, its streams were added to the track list. So they were printed twice, and switching to the next segment didn't work, because the right streams were not selected. 2. EDL, CUE, as well as possibly certain Matroska files don't have any data or tracks in the "main" demuxer, so normally the first segment is picked for the track list. This was simply broken. Fix by sprinkling the code with various hacks.
2014-07-20 18:02:58 +00:00
// Does not change with under_timeline, but it useless for most purposes.
struct sh_stream *original_stream;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
// Value can change if under_timeline==true.
struct demuxer *demuxer;
mp_core: fix a comment track.demuxer is never NULL (anymore).
2013-09-07 18:21:11 +00:00
// Invariant: !stream || stream->demuxer == demuxer
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
struct sh_stream *stream;
core: add demux_sub pseudo demuxer Subtitle files are opened in mplayer.c, not using the demuxer infrastructure in general. Pretend that this is not the case (outside of the loading code) by opening a pseudo demuxer that does nothing. One advantage is that the initialization code is now the same, and there's no confusion about what the difference between track->stream, track->sh_sub and mpctx->sh_sub is supposed to be. This is a bit stupid, and it would be much better if there were proper subtitle demuxers (there are many in recent FFmpeg, but not Libav). So for now this is just a transition to a more proper architecture. Look at demux_sub like an artifical limb: it's ugly, but don't hate it - it helps you to get on with your life.
2013-06-01 17:43:11 +00:00
// For external subtitles, which are read fully on init. Do not attempt
// to read packets from them.
bool preloaded;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
};
audio: change playback restart and resyncing This commit makes audio decoding non-blocking. If e.g. the network is too slow the playloop will just go to sleep, instead of blocking until enough data is available. For video, this was already done with commit 7083f88c. For audio, it's unfortunately much more complicated, because the audio decoder was used in a blocking manner. Large changes are required to get around this. The whole playback restart mechanism must be turned into a statemachine, especially since it has close interactions with video restart. Lots of video code is thus also changed. (For the record, I don't think switching this code to threads would make this conceptually easier: the code would still have to deal with external input while blocked, so these in-between states do get visible [and thus need to be handled] anyway. On the other hand, it certainly should be possible to modularize this code a bit better.) This will probably cause a bunch of regressions.
2014-07-28 18:40:43 +00:00
/* Note that playback can be paused, stopped, etc. at any time. While paused,
* playback restart is still active, because you want seeking to work even
* if paused.
* The main purpose of distinguishing these states is proper reinitialization
* of A/V sync.
*/
enum playback_status {
// code may compare status values numerically
STATUS_SYNCING, // seeking for a position to resume
STATUS_FILLING, // decoding more data (so you start with full buffers)
STATUS_READY, // buffers full, playback can be started any time
STATUS_PLAYING, // normal playback
STATUS_DRAINING, // decoding has ended; still playing out queued buffers
STATUS_EOF, // playback has ended, or is disabled
};
player: add infrastructure to select multiple tracks at once Of course this does not allow decoding multiple tracks at once; it just adds some minor infrastructure, which could be used to achieve this.
2013-12-24 16:46:08 +00:00
#define NUM_PTRACKS 2
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
typedef struct MPContext {
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
bool initialized;
client API: add API function that ensures total destruction mpv_destroy() should perhaps better be called mpv_detach(), because it destroys only the handle, not necessarily the player. The player is only terminated if a quit command is sent. This function quits automatically, and additionally waits until the player is completely destroyed. It removes the possibility that the player core is still uninitializing, while all client handles are already destroyed. (Although in practice, the difference is usually not important.)
2014-06-07 13:08:45 +00:00
bool autodetach;
mp_msg: introduce new log functions and macros This has two goals: 1. Getting rid of global variables to make the core library-safe. 2. Getting rid of all the MSGT_* constants and the inconsistent prefixes spread throughout the source code. Both goals are not immediately reached with this commit. It's a huge transition that will take time. There are over >2500 mp_msg calls in the source, which all have to be replaced for this to work. The inconsistent prefixes are in particular annoying. Lots of code manually prefixes messages, e.g. mp_msg(MSGT_VO, MSGL_V, "[vo] ..."). Sometimes the prefixes don't even follow this convention (for example vo_direct3d.c uses "<vo_direct3d>" as prefix). This commit allows automatically adding prefixes on request, so consistency will hopefully improve. For now, this commit adds unused stuff, and behavior should not change. In mplayer.c, move the GetCpuCaps() call, because that used mp_msg() before mp_msg_init() was run.
2013-07-31 19:40:30 +00:00
struct mpv_global *global;
core: make mpctx->opts a pointer Prevents some awkwardness in a later commit, and makes the code more uniform with other places where MPOpts is accessed. This is a pretty annoying commit (touches tons of lines all over the place), but it hurts only once.
2013-07-27 19:24:54 +00:00
struct MPOpts *opts;
mp_msg: introduce new log functions and macros This has two goals: 1. Getting rid of global variables to make the core library-safe. 2. Getting rid of all the MSGT_* constants and the inconsistent prefixes spread throughout the source code. Both goals are not immediately reached with this commit. It's a huge transition that will take time. There are over >2500 mp_msg calls in the source, which all have to be replaced for this to work. The inconsistent prefixes are in particular annoying. Lots of code manually prefixes messages, e.g. mp_msg(MSGT_VO, MSGL_V, "[vo] ..."). Sometimes the prefixes don't even follow this convention (for example vo_direct3d.c uses "<vo_direct3d>" as prefix). This commit allows automatically adding prefixes on request, so consistency will hopefully improve. For now, this commit adds unused stuff, and behavior should not change. In mplayer.c, move the GetCpuCaps() call, because that used mp_msg() before mp_msg_init() was run.
2013-07-31 19:40:30 +00:00
struct mp_log *log;
Move global mconfig to mpctx The global was used in the function cfg_include which handles the -include option. Make the address available in that function by creating a new dynamically allocated option in m_config_new that has the address in the option's private data. asxparser.c also used the global. Making it available through all ways the code could get called required a number of relatively straightforward changes to playtree and menu code.
2008-04-26 07:44:59 +00:00
struct m_config *mconfig;
Create a context for input.c state Start moving static variables to a context struct. Only autorepeat state is moved to the struct in this commit. mp_input_check_interrupt now requires the context variable. Change stream functions to pass it. It's still stored in a static variable in stream/.
2008-04-30 04:15:52 +00:00
struct input_ctx *input;
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
struct mp_client_api *clients;
struct mp_dispatch_queue *dispatch;
stream: redo playback abort handling This mechanism originates from MPlayer's way of dealing with blocking network, but it's still useful. On opening and closing, mpv waits for network synchronously, and also some obscure commands and use-cases can lead to such blocking. In these situations, the stream is asynchronously forced to stop by "interrupting" it. The old design interrupting I/O was a bit broken: polling with a callback, instead of actively interrupting it. Change the direction of this. There is no callback anymore, and the player calls mp_cancel_trigger() to force the stream to return. libavformat (via stream_lavf.c) has the old broken design, and fixing it would require fixing libavformat, which won't happen so quickly. So we have to keep that part. But everything above the stream layer is prepared for a better design, and more sophisticated methods than mp_cancel_test() could be easily introduced. There's still one problem: commands are still run in the central playback loop, which we assume can block on I/O in the worst case. That's not a problem yet, because we simply mark some commands as being able to stop playback of the current file ("quit" etc.), so input.c could abort playback as soon as such a command is queued. But there are also commands abort playback only conditionally, and the logic for that is in the playback core and thus "unreachable". For example, "playlist_next" aborts playback only if there's a next file. We don't want it to always abort playback. As a quite ugly hack, abort playback only if at least 2 abort commands are queued - this pretty much happens only if the core is frozen and doesn't react to input.
2014-09-13 12:23:08 +00:00
struct mp_cancel *playback_abort;
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
struct mp_log *statusline;
Create a context struct for OSD state This commit creates the struct and passes it to some functions that needs to access OSD state but does not yet move much data from globals to it. vf_expand accesses the OSD state for rendering purposes outside of the normal OSD draw time. The way this currently works is suboptimal, but I did not attempt to clean it up now. To keep things working the same way vf_expand needs to know the address of the state object to be able to access the data even in the functions that should normally not need it. For that purpose this commit adds a VFCTRL to tell vf_expand the address of the object.
2008-06-23 22:53:58 +00:00
struct osd_state *osd;
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
char *term_osd_text;
char *term_osd_status;
player: don't use OSD message stack for term OSD subs Showing subtitles on terminal used the OSD message stack (which uses a stack to "pile up" messages that were displayed at the same time). This had a bunch of weird and annoying consequences. This accessed a certain osd_state field, which is a minor annoyance since I want to make that struct opaque. Implement this differently.
2014-01-17 20:55:23 +00:00
char *term_osd_subs;
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
char *term_osd_contents;
player: set PulseAudio stream title to window title Set the PulseAudio stream title, just like the VO window title is set. Refactor update_vo_window_title() so that we can use it for AOs too. The ao_pulse.c bit is stolen from MPlayer.
2013-11-09 23:49:13 +00:00
char *last_window_title;
core: Clean up OSD seek info logic Clean up the code and make the behavior more consistent. Before bits of the OSD information were triggered in different places, and various property commands that affect playback position only showed the seek bar while the main seek command also triggered showing the percentage in OSD text. Now only the seek and chapter commands trigger all information and others nothing (which is consistent with most property behavior).
2009-03-30 00:13:17 +00:00
commands: more user-control whether a command shows OSD bars/messages The "no-osd" prefix was introduced earlier to disable OSD selectively based on the key binding. Extend this, and allow the user to force display of an OSD bar ("osd-bar"), OSD message ("osd-msg") or both ("osd-msg-bar"). This changes mainly how property setting functions behave. The default behavior is still the same.
2012-09-25 01:24:38 +00:00
int add_osd_seek_info; // bitfield of enum mp_osd_seek_info
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
double osd_visible; // for the osd bar only
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
int osd_function;
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
double osd_function_visible;
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
double osd_msg_visible;
osd: don't let slow commands cut OSD messages short Done for screenshot commands, requested by a user.
2014-10-06 20:19:24 +00:00
double osd_msg_next_duration;
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
double osd_last_update;
player: rate-limit OSD text update There's no need to update OSD messages and the terminal status if nobody is going to see it. Since the player doesn't block on video display anymore, this update happens to often and probably burns slightly more CPU than necessary. (OSD redrawing is handled separately, so it's just mostly useless text processing and such.) Change it so that it's updated only on every video frame or all 50ms (whatever comes first). For VO OSD, we could in theory try to lock to the OSD redraw heuristic or the display refresh rate, but that's more complicated and doesn't work for the terminal status.
2014-09-25 18:25:24 +00:00
bool osd_force_update;
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
char *osd_msg_text;
bool osd_show_pos;
sub: uglify OSD code path with locking Do two things: 1. add locking to struct osd_state 2. make struct osd_state opaque While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses lots of osd_state (and osd_object) members. To make sure everything is accessed synchronously, I prefer making osd_state opaque, even if it means adding pretty dumb accessors. All of this is meant to allow running VO in their own threads. Eventually, VOs will request OSD on their own, which means osd_state will be accessed from foreign threads.
2014-01-18 00:19:20 +00:00
struct osd_progbar_state osd_progbar;
osd: fix OSD status symbol display in some cases The playback status symbol in the OSD status display on video (such as displayed when seeking or with the show_progress input command) sometimes kept displaying the last seek, without resetting the symbol. (For example: disable the OSD, seek, enable the OSD, run show_progress; but also other cases.) The main reason for that was the code clearing the OSD bar is also responsible for clearing the osd_function (which stores the playback symbol). If no OSD bar was set, the osd_function was never reset. Fix by always setting the timer for clearing the OSD bar and the osd_function whenever the osd_function is set. Clearing the OSD bar when it wasn't set is OK. If the OSD bar is set some time after osd_function is set, the timer is overwritten - that's a good thing, as it makes both disappear from the screen at exactly the same time. Always reset osd_function to 0 and determine the playback status explicitly from mpctx->paused when displaying the status on screen.
2012-11-20 16:20:45 +00:00
mplayer: turn playtree into a list, and change per-file option handling Summary: - There is no playtree anymore. It's reduced to a simple list. - Options are now always global. You can still have per-file options, but these are optional and require special syntax. - The slave command pt_step has been removed, and playlist_next and playlist_prev added. (See etc/input.conf changes.) This is a user visible incompatible change, and will break slave-mode applications. - The pt_clear slave command is renamed to playlist_clear. - Playtree entries could have multiple files. This is not the case anymore, and playlist entries have always exactly one entry. Whenever something adds more than one file (like ASX playlists or dvd:// or dvdnav:// on the command line), all files are added as separate playlist entries. Note that some of the changes are quite deep and violent. Expect regressions. The playlist parsing code in particular is of low quality. I didn't try to improve it, and merely spent to least effort necessary to keep it somehow working. (Especially ASX playlist handling.) The playtree code was complicated and bloated. It was also barely used. Most users don't even know that mplayer manages the playlist as tree, or how to use it. The most obscure features was probably specifying a tree on command line (with '{' and '}' to create/close tree nodes). It filled the player code with complexity and confused users with weird slave commands like pt_up. Replace the playtree with a simple flat playlist. Playlist parsers that actually return trees are changed to append all files to the playlist pre-order. It used to be the responsibility of the playtree code to change per-file config options. Now this is done by the player core, and the playlist code is free of such details. Options are not per-file by default anymore. This was a very obscure and complicated feature that confused even experienced users. Consider the following command line: mplayer file1.mkv file2.mkv --no-audio file3.mkv This will disable the audio for file2.mkv only, because options are per-file by default. To make the option affect all files, you're supposed to put it before the first file. This is bad, because normally you don't need per-file options. They are very rarely needed, and the only reasonable use cases I can imagine are use of the encode backend (mplayer encode branch), or for debugging. The normal use case is made harder, and the feature is perceived as bug. Even worse, correct usage is hard to explain for users. Make all options global by default. The position of an option isn't significant anymore (except for options that compensate each other, consider --shuffle --no-shuffle). One other important change is that no options are reset anymore if a new file is started. If you change settings with slave mode commands, they will not be changed by playing a new file. (Exceptions include settings that are too file specific, like audio/subtitle stream selection.) There is still some need for per-file options. Debugging and encoding are use cases that profit from per-file options. Per-file profiles (as well as per-protocol and per-VO/AO options) need the implementation related mechanisms to backup and restore options when the playback file changes. Simplify the save-slot stuff, which is possible because there is no hierarchical play tree anymore. Now there's a simple backup field. Add a way to specify per-file options on command line. Example: mplayer f1.mkv -o0 --{ -o1 f2.mkv -o2 f3.mkv --} f4.mkv -o3 will have the following options per file set: f1.mkv, f4.mkv: -o0 -o3 f2.mkv, f3.mkv: -o0 -o3 -o1 -o2 The options --{ and --} start and end per-file options. All files inside the { } will be affected by the options equally (similar to how global options and multiple files are handled). When playback of a file starts, the per-file options are set according to the command line. When playback ends, the per-file options are restored to the values when playback started.
2012-07-31 19:33:26 +00:00
struct playlist *playlist;
player: deal with some corner cases with playlist navigation The purpose is making accessing the current playlist entry saner when commands are executed during initialization, termination, or after playlist navigation commands. For example, the "playlist_remove current" command will invalidate playlist->current - but some things still access the playlist entry even on uninit. Until now, checking stop_play implicitly took care of it, so it worked, but it was still messy. Introduce the mpctx->playing field, which points to the current playlist entry, even if the entry was removed and/or the playlist's current entry was moved (e.g. due to playlist navigation).
2014-09-08 22:38:38 +00:00
struct playlist_entry *playing; // currently playing file
player: open stream and demuxer asynchronously Run opening the stream and opening the demuxer in a separate thread. This should remove the last code paths in which the player can normally get blocked on network. When the stream is opened, the player will still react to input and so on. Commands to abort opening can also be handled properly, instead of using some of the old hacks in input.c. The only thing the user can really do is aborting loading by navigating the playlist or quitting. Whether playback abort works depends on the stream implementation; with normal network, this will depend on what libavformat (via "interrupt" callback) does. Some pain is caused by DVD/BD/DVB. These want to reload the demuxer sometimes. DVB wants it in order to discard old, inactive streams. DVD/BD for the same reason, and also for reloading stream languages and similar metadata. This means the stream and the demuxer have to be loaded separately. One minor detail is that we now need to copy all global options. This wasn't really needed before, because the options were accessed on opening only, but since opening is now on a separate thread, this obviously becomes a necessity.
2014-10-06 19:20:38 +00:00
char *filename; // immutable copy of playing->filename (or NULL)
command: add a mechanism to allow scripts to intercept file loads A vague idea to get something similar what libquvi did. Undocumented because it might change a lot, or even be removed. To give an idea what it does, a Lua script could do the following: -- type ID priority mp.commandv("hook_add", "on_load", 0, 0) mp.register_script_message("hook_run", function(param, param2) -- param is "0", the user-chosen ID from the hook_add command -- param2 is the magic value that has to be passed to finish -- the hook mp.resume_all() -- do something, maybe set options that are reset on end: mp.set_property("file-local-options/name", "value") -- or change the URL that's being opened: local url = mp.get_property("stream-open-filename") mp.set_property("stream-open-filename", url .. ".png") -- let the player (or the next script) continue mp.commandv("hook_ack", param2) end)
2014-10-15 21:09:53 +00:00
char *stream_open_filename;
core: Clean up move-to-next-file logic The mpctx->eof field was used to also store other reasons to stop playing the current file besides EOF, and the code didn't properly distinguish those from EOF. Rename the field to "stop_play" and clean up some of the code accessing it. Properly separating EOF from other reasons allows handling file switching better. Before this commit buffered audio was always drained before moving to the next file (the only exception when it was NOT drained when stopping a file was when quitting the player completely). This added an extra delay when manually moving to the next file as you had to wait for the currently buffered audio to finish playing before the next file would start. After this commit audio is only drained if the file reaches EOF normally; otherwise audio is cut and the next file starts immediately.
2008-08-13 05:06:26 +00:00
enum stop_play_reason stop_play;
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
bool playback_initialized; // playloop can be run/is running
player: improve exit message in some scenarios If you played e.g. an audio-only file and something bad happened that interrupted playback, the exit message could say "No files played". This was awkward, so show a different message in this case. Also overhaul how the exit status is reported in order to make this easier. This includes things such as not reporting a playback error when loading playlists (playlists contain no video or audio, which was considered an error). Not sure if I'm happy with this, but for now it seems like a slight improvement.
2014-10-30 22:54:06 +00:00
int error_playing;
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
mplayer: never exit mplayer from within the play loop The only place exit_player() should be called is the main() function. exit_player() should be the only function allowed to call exit(). This makes it easier to guarantee proper deinitialization, and allows using the --leak-report flag without showing false positives. The quit slave command now sets a flag only. It uses the same mechanism that's normally used to advance to the next file on the playlist, so the rest of the playback path should be able to react to the quit command quickly enough. That is, the player should react just as fast to quit requests in practice as before this commit. In reinit_audio_chain(), the player was actually exited if init_audio_filters() failed. Reuse the normal error handling path to handle this condition.
2012-08-04 01:46:11 +00:00
// Return code to use with PT_QUIT
mplayer: add more verbose exit codes
2013-08-02 08:32:38 +00:00
int quit_custom_rc;
bool has_quit_custom_rc;
config: don't save options to resume-config that didn't change This is approximate: we read each option value on program start (before starting playback of a file), and when writing the resume config, compare each value to the current state. This also means when a value is changed and then changed back, it's not stored. In particular, option values set in config files and on the command line are considered the default. This should help reducing the numbers of options overridden by the resume config. If too much is overridden, it becomes an inconvenience, because changes in config files will apparently have no effect when resuming a file. Also see github issue #574.
2014-02-25 21:34:32 +00:00
char **resume_defaults;
mplayer: never exit mplayer from within the play loop The only place exit_player() should be called is the main() function. exit_player() should be the only function allowed to call exit(). This makes it easier to guarantee proper deinitialization, and allows using the --leak-report flag without showing false positives. The quit slave command now sets a flag only. It uses the same mechanism that's normally used to advance to the next file on the playlist, so the rest of the playback path should be able to react to the quit command quickly enough. That is, the player should react just as fast to quit requests in practice as before this commit. In reinit_audio_chain(), the player was actually exited if init_audio_filters() failed. Reuse the normal error handling path to handle this condition.
2012-08-04 01:46:11 +00:00
player: improve exit message in some scenarios If you played e.g. an audio-only file and something bad happened that interrupted playback, the exit message could say "No files played". This was awkward, so show a different message in this case. Also overhaul how the exit status is reported in order to make this easier. This includes things such as not reporting a playback error when loading playlists (playlists contain no video or audio, which was considered an error). Not sure if I'm happy with this, but for now it seems like a slight improvement.
2014-10-30 22:54:06 +00:00
// Global file statistics
int files_played; // played without issues (even if stopped by user)
int files_errored; // played, but errors happened at one point
int files_broken; // couldn't be played at all
// Current file statistics
mplayer: fix looping of very short files Commit 884c179 attempted to make it possible to skip backwards through the playlist, even for files which fail to intitialize, or play for a very short time. This was also used to prevent mpv from looping forever and doing nothing if --loop=inf is used, and no file in the playlist is playable. This broke looping of very short files, because mpv was assuming that this case happened. But there are legitimate use cases. Fix this by making the looping case special. Instead of checking whether playback was "very short", check whether something could be decoded and displayed/played. If yes, allow looping.
2013-09-29 19:10:36 +00:00
int64_t shown_vframes, shown_aframes;
player: handle edition reloading slightly differently Use the codepath that is normally used for DVD/BD title switching and DVB channel switching. Removes some extra artifacts from the client API: now MPV_EVENT_END_FILE will never be called on reloads (and neither is MPV_EVENT_START_FILE).
2014-10-28 14:30:27 +00:00
struct stream *stream; // stream that was initially opened
core, timeline: don't keep separate stream field The timeline code kept pairs of stream and demuxer references around. The reference to the stream is redundant, because it can be accessed through the demuxer. Simplify the code by removing the redundant stream reference. Also, set mpctx->stream to the current segment when using timeline. Fix a small memory leak in tl_matroska.c introduced earlier.
2012-08-19 15:58:58 +00:00
struct demuxer **sources;
Initial ordered chapters support Add basic support for Matroska ordered chapters. The switching between segments is implemented as a general edit timeline that could also be used for other purposes. Some things still need improvement. In particular the current code does not try to do any proper mapping between audio/video/subtitle streams of different files and there should be options for better control of how MPlayer searches other files for the required content.
2009-03-29 19:45:06 +00:00
int num_sources;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
Initial ordered chapters support Add basic support for Matroska ordered chapters. The switching between segments is implemented as a general edit timeline that could also be used for other purposes. Some things still need improvement. In particular the current code does not try to do any proper mapping between audio/video/subtitle streams of different files and there should be options for better control of how MPlayer searches other files for the required content.
2009-03-29 19:45:06 +00:00
struct timeline_part *timeline;
int num_timeline_parts;
int timeline_part;
player: always use demux_chapter Instead of defining a separate data structure in the core. For some odd reason, demux_chapter exported the chapter time in nano-seconds. Change that to the usual timestamps (rename the field to make any code relying on this to fail compilation), and also remove the unused chapter end time.
2014-11-02 16:20:04 +00:00
struct demux_chapter *chapters;
Support chapter seeking with ordered chapters
2009-04-02 02:00:22 +00:00
int num_chapters;
Initial ordered chapters support Add basic support for Matroska ordered chapters. The switching between segments is implemented as a general edit timeline that could also be used for other purposes. Some things still need improvement. In particular the current code does not try to do any proper mapping between audio/video/subtitle streams of different files and there should be options for better control of how MPlayer searches other files for the required content.
2009-03-29 19:45:06 +00:00
double video_offset;
Remove _s/_st suffix from some struct names Since the names are always used after the keyword "struct" having a suffix as in "struct demuxer_st" is almost completely pointless.
2008-04-24 02:49:44 +00:00
struct demuxer *demuxer;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
struct track **tracks;
int num_tracks;
Add initial Lua scripting support This is preliminary. There are still tons of issues, and any aspect of scripting may change in the future. I decided to merge this (preliminary) work now because it makes it easier to develop it, not because it's done. lua.rst is clear enough about it (plus some sarcasm). This requires linking to Lua. Lua has no official pkg-config file, but there are distribution specific .pc files, all with different names. Adding a non-pkg-config based configure test was considered, but we'd rather not. One major complication is that libquvi links against Lua too, and if the Lua version is different from mpv's, you will get a crash as soon as libquvi uses Lua. (libquvi by design always runs when a file is opened.) I would consider this the problem of distros and whoever builds mpv, but to make things easier for users, we add a terrible runtime test to the configure script, which probes whether libquvi will crash. This is disabled when cross-compiling, but in that case we hope the user knows what he is doing.
2013-09-25 22:41:14 +00:00
char *track_layout_hash;
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
// Selected tracks. NULL if no track selected.
player: add infrastructure to select multiple tracks at once Of course this does not allow decoding multiple tracks at once; it just adds some minor infrastructure, which could be used to achieve this.
2013-12-24 16:46:08 +00:00
// There can be NUM_PTRACKS of the same STREAM_TYPE selected at once.
// Currently, this is used for the secondary subtitle track only.
struct track *current_track[NUM_PTRACKS][STREAM_TYPE_COUNT];
core: manage tracks in the frontend Introduce a general track struct for every audio/video/subtitle track known to the frontend. External files (subtitles) are now represented as tracks too. This mainly serves to clean up the subtitle selection code: now every subtitle is simply a track, instead of using a messy numbering that goes by subtitle type (as it was stored in the global_sub_pos field). The mplayer fontend will list external subtitle files as additional tracks. The timeline code now tries to match the exact demuxer IDs of all tracks. This may cause problems when Matroska files with different track numberings are used with EDL timelines. Change demux_lavf not to set demuxer IDs, since most time they are not set.
2012-08-19 16:01:30 +00:00
video: move decoder context from sh_video into new struct This is similar to the sh_audio commit. This is mostly cosmetic in nature, except that it also adds automatical freeing of the decoder driver's state struct (which was in sh_video->context, now in dec_video->priv). Also remove all the stheader.h fields that are not needed anymore.
2013-11-23 20:36:20 +00:00
struct dec_video *d_video;
audio: move decoder context from sh_audio into new struct Move all state that basically changes during decoding or is needed in order to manage decoding itself into a new struct (dec_audio). sh_audio (defined in stheader.h) is supposed to be the audio stream header. This should reflect the file headers for the stream. Putting the decoder context there is strange design, to say the least.
2013-11-23 20:22:17 +00:00
struct dec_audio *d_audio;
player: add --secondary-sid for displaying a second subtitle stream This is relatively hacky, but it's Christmas, so it's ok. This does two things: 1. allow selecting two subtitle tracks, and 2. include a hack that renders the second subtitle always as toptitle. See manpage additions how to use this.
2013-12-24 16:46:14 +00:00
struct dec_sub *d_sub[2];
audio: move decoder context from sh_audio into new struct Move all state that basically changes during decoding or is needed in order to manage decoding itself into a new struct (dec_audio). sh_audio (defined in stheader.h) is supposed to be the audio stream header. This should reflect the file headers for the stream. Putting the decoder context there is strange design, to say the least.
2013-11-23 20:22:17 +00:00
core: refactor MPContext.demuxer field accesses Whenever the demuxer is accessed to retrieve metadata, use the newly introduced master_demuxer field instead. If a timeline is used, the master_demuxer will still refer to the main file, instead to segments. Instead of mpctx->demuxer->stream, access mpctx->stream; even though they are the same, the code becomes shorter. For the TV code, introduce a function get_tvh() to access the TV handle, instead of duplicating the code all over the place. Often the demuxer field is checked to determine whether something is currently played; prefer other methods over that. Note that the code before always accessed the current timeline segment, and would e.g. read file metadata of the current segment. Now it always returns metadata for the master file. This may have various wanted and unwanted effects.
2012-08-19 16:07:06 +00:00
// Uses: accessing metadata (consider ordered chapters case, where the main
// demuxer defines metadata), or special purpose demuxers like TV.
struct demuxer *master_demuxer;
player: fix regression with ordered chapters Broken by commit 1301a907. This commit added demuxer threading, and changed some other things to make them simpler and more orthogonal. One of these things was ntofications about streams that appear during playback. That's an obscure corner case, but the change made handling of it as natural as normal initialization. This didn't work for two reasons: 1. When playing an ordered chapters file where the initial segment was not from the main file, its streams were added to the track list. So they were printed twice, and switching to the next segment didn't work, because the right streams were not selected. 2. EDL, CUE, as well as possibly certain Matroska files don't have any data or tracks in the "main" demuxer, so normally the first segment is picked for the track list. This was simply broken. Fix by sprinkling the code with various hacks.
2014-07-20 18:02:58 +00:00
struct demuxer *track_layout; // complication for ordered chapters
core: refactor MPContext.demuxer field accesses Whenever the demuxer is accessed to retrieve metadata, use the newly introduced master_demuxer field instead. If a timeline is used, the master_demuxer will still refer to the main file, instead to segments. Instead of mpctx->demuxer->stream, access mpctx->stream; even though they are the same, the code becomes shorter. For the TV code, introduce a function get_tvh() to access the TV handle, instead of duplicating the code all over the place. Often the demuxer field is checked to determine whether something is currently played; prefer other methods over that. Note that the code before always accessed the current timeline segment, and would e.g. read file metadata of the current segment. Now it always returns metadata for the master file. This may have various wanted and unwanted effects.
2012-08-19 16:07:06 +00:00
mixer: make struct opaque Also remove stray include statements from ao_alsa and ao_oss.
2013-09-19 12:33:26 +00:00
struct mixer *mixer;
audio: change external AO interface to "ao_[method](ao, ...)" Make the outside interface of audio output handling similar to the video output one. An AO object is first created, and then methods called with ao_[methodname](ao, args...). However internally libao2/ still holds all data in globals, and trying to create multiple simultaneous AO instances won't work.
2011-04-09 00:03:22 +00:00
struct ao *ao;
audio: add a "weak" gapless mode, and make it default Basically, this allows gapless playback with similar files (including the ordered chapter case), while still being robust in general. The implementation is quite simplistic on purpose, in order to avoid all the weird corner cases that can occur when creating the filter chain. The consequence is that it might do not-gapless playback in more cases when needed, but if that bothers you, you still can use the normal gapless mode. Just using "--gapless-audio" or "--gapless-audio=yes" selects the old mode.
2014-06-08 21:54:05 +00:00
struct mp_audio *ao_decoder_fmt; // for weak gapless audio check
audio/out: make ao struct opaque We want to move the AO to its own thread. There's no technical reason for making the ao struct opaque to do this. But it helps us sleep at night, because we can control access to shared state better.
2014-03-07 14:24:32 +00:00
struct mp_audio_buffer *ao_buffer; // queued audio; passed to ao_play() later
Add new video driver API Create new video driver API that has a per-instance context structure and does not rely on keeping status in global or static variables. Existing drivers are not yet converted to this API; instead there is a wrapper which translates calls to them. In the new API, an old API call vo_functions->xyz(args) is generally replaced by vo_xyz(vo_instance, args). The changes to keep the vesa, dxr2 and xover drivers compiling have not been tested.
2008-04-03 03:25:41 +00:00
struct vo *video_out;
video: fix and simplify video format changes and last frame display The previous commit broke these things, and fixing them is separate in this commit in order to reduce the volume of changes. Move the image queue from the VO to the playback core. The image queue is a remnant of the old way how vdpau was implemented, and increasingly became more and more an artifact. In the end, it did only one thing: computing the duration of the current frame. This was done by taking the PTS difference between the current and the future frame. We keep this, but by moving it out of the VO, we don't have to special-case format changes anymore. This simplifies the code a lot. Since we need the queue to compute the duration only, a queue size larger than 2 makes no sense, and we can hardcode that. Also change how the last frame is handled. The last frame is a bit of a problem, because video timing works by showing one frame after another, which makes it a special case. Make the VO provide a function to notify us when the frame is done, instead. The frame duration is used for that. This is not perfect. For example, changing playback speed during the last frame doesn't update the end time. Pausing will not stop the clock that times the last frame. But I don't think this matters for such a corner case.
2014-08-12 21:17:35 +00:00
// next_frame[0] is the next frame, next_frame[1] the one after that.
struct mp_image *next_frame[2];
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
audio: change playback restart and resyncing This commit makes audio decoding non-blocking. If e.g. the network is too slow the playloop will just go to sleep, instead of blocking until enough data is available. For video, this was already done with commit 7083f88c. For audio, it's unfortunately much more complicated, because the audio decoder was used in a blocking manner. Large changes are required to get around this. The whole playback restart mechanism must be turned into a statemachine, especially since it has close interactions with video restart. Lots of video code is thus also changed. (For the record, I don't think switching this code to threads would make this conceptually easier: the code would still have to deal with external input while blocked, so these in-between states do get visible [and thus need to be handled] anyway. On the other hand, it certainly should be possible to modularize this code a bit better.) This will probably cause a bunch of regressions.
2014-07-28 18:40:43 +00:00
enum playback_status video_status, audio_status;
bool restart_complete;
core: completely change handling of attached picture pseudo video Before this commit, we tried to play along with libavformat and tried to pretend that attached pictures are video streams with a single frame, and that the frame magically appeared at the seek position when seeking. The playback core would then switch to a mode where the video has ended, and the "remaining" audio is played. This didn't work very well: - we needed a hack in demux.c, because we tried to read more packets in order to find the "next" video frame (libavformat doesn't tell us if a stream has ended) - switching the video stream didn't work, because we can't tell libavformat to send the packet again - seeking and resuming after was hacky (for some reason libavformat sets the returned packet's PTS to that of the previously returned audio packet in generic code not related to attached pictures, and this happened to work) - if the user did something stupid and e.g. inserted a deinterlacer by default, a picture was never displayed, only an inactive VO window) - same when using a command that reconfigured the VO (like switching aspect or video filters) - hr-seek didn't work For this reason, handle attached pictures as separate case with a separate video decoding function, which doesn't read packets. Also, do not synchronize audio to video start in this case.
2013-07-11 17:23:56 +00:00
/* Set if audio should be timed to start with video frame after seeking,
* not set when e.g. playing cover art */
bool sync_audio_to_video;
core: add support for precise non-keyframe-limited seeks Add support for seeking to an arbitrary non-keyframe position by decoding video starting from the previous keyframe. Whether to use this functionality when seeking is controlled by the new option -hr-seek and a new third argument to the "seek" command. The default is to use it for absolute seeks (like chapter seeks) but not for relative ones. Because there's currently no support for cutting encoded audio some desync is expected if encoded audio passthrough is used. Currently precise seeks always go to the first frame with timestamp equal to or greater than the target position; there's no support for "matching or earlier" backwards seeks at frame level.
2010-12-14 23:09:47 +00:00
bool hrseek_active;
bool hrseek_framedrop;
double hrseek_pts;
Move the sh_audio->delay field to mpctx->delay. The value is related to overall a/v sync and is not used by audio demuxers or decoders. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22506 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-03-11 06:16:14 +00:00
// AV sync: the next frame should be shown when the audio out has this
// much (in seconds) buffered data left. Increased when more data is
player: minor changes This shouldn't change anything functionally. Change the A/V desync message. --framedrop is enabled by default now, so the text must be changed a little. I've never heard of audio outputs messing up A/V sync recently, so remove that part. Remove the unused ao_pts field. Reorder 2 A/V sync related expressions so that they look the same.
2014-08-25 19:28:56 +00:00
// written to the ao, decreased when moving to the next video frame.
Move the sh_audio->delay field to mpctx->delay. The value is related to overall a/v sync and is not used by audio demuxers or decoders. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22506 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-03-11 06:16:14 +00:00
double delay;
player: minor changes This shouldn't change anything functionally. Change the A/V desync message. --framedrop is enabled by default now, so the text must be changed a little. I've never heard of audio outputs messing up A/V sync recently, so remove that part. Remove the unused ao_pts field. Reorder 2 A/V sync related expressions so that they look the same.
2014-08-25 19:28:56 +00:00
// AV sync: time in seconds until next frame should be shown
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
double time_frame;
core: Rewrite some of the A/V sync related code Notable functionality changes: * Timing change between any two frames is now accurately limited to 1/10 of their nominal distance. Previous code did not always use the correct duration. * The status line now keeps showing the same A-V sync value from one video frame change to the next. Previously it kept recalculating the value using a new audio position but the same video position when the status line was updated between video frames. This incorrectly showed the video losing sync with audio. * The status line now displays actual measured A-V difference in autosync mode too. The previous code displayed values that completely ignored real timing in autosync mode, showing 0 A-V difference even when video was significantly behind audio due to inadequate decoding speed. The new behavior can make the shown A-V values appear more unstable if the audio out has unreliable delay measurements (the most likely reason to use autosync), but this is a display change rather than a timing quality change. * Autosync mode now tries to adjust timing by the amount of time vo_flip() calls take, so the calls start earlier and finish at the time the frame should be shown. Previously non-autosync mode adjusted for this but autosync did not. * The warning about the system being too slow to decode the video in realtime is now displayed in autosync mode too.
2008-12-08 18:04:08 +00:00
// How much video timing has been changed to make it match the audio
// timeline. Used for status line information only.
double total_avsync_change;
player: update meaning of drop_frame_cnt Rename the variable, update comments, and update the documentation of the property which returns its value.
2014-11-01 00:07:21 +00:00
// Total number of dropped frames that were dropped by decoder.
int dropped_frames_total;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
// Number of frames dropped in a row.
int dropped_frames;
core: Rewrite some of the A/V sync related code Notable functionality changes: * Timing change between any two frames is now accurately limited to 1/10 of their nominal distance. Previous code did not always use the correct duration. * The status line now keeps showing the same A-V sync value from one video frame change to the next. Previously it kept recalculating the value using a new audio position but the same video position when the status line was updated between video frames. This incorrectly showed the video losing sync with audio. * The status line now displays actual measured A-V difference in autosync mode too. The previous code displayed values that completely ignored real timing in autosync mode, showing 0 A-V difference even when video was significantly behind audio due to inadequate decoding speed. The new behavior can make the shown A-V values appear more unstable if the audio out has unreliable delay measurements (the most likely reason to use autosync), but this is a display change rather than a timing quality change. * Autosync mode now tries to adjust timing by the amount of time vo_flip() calls take, so the calls start earlier and finish at the time the frame should be shown. Previously non-autosync mode adjusted for this but autosync did not. * The warning about the system being too slow to decode the video in realtime is now displayed in autosync mode too.
2008-12-08 18:04:08 +00:00
// A-V sync difference when last frame was displayed. Kept to display
// the same value if the status line is updated at a time where no new
// video frame is shown.
double last_av_difference;
core: avoid using sh_video->pts as "current pts" Add a new field "video_pts" to mpctx. It records the time of the last frame flipped visible on VO. Change various code which used sh_video->pts to use either the new field or get_current_time(mpctx).
2010-12-14 20:31:39 +00:00
/* timestamp of video frame currently visible on screen
* (or at least queued to be flipped by VO) */
double video_pts;
core: audio: improve audio-only seeks and position reporting Seeking while paused could result in the current audio pts being reported incorrectly due to relevant variables not being reinitialized after the seek until more audio was played. When playing audio-only files, this meant that current overall playback position could be reported incorrectly which in turn could break further seeks. Improve things on two levels: First, store the seek target position and use that as the current playback position for audio-only files until things can be reinitialized. Second, try to reinitialize audio decoding enough to know its current pts even while paused. Also avoid printing the actual huge negative value of MP_NOPTS_VALUE on the status line when pts could not be determined.
2011-07-30 22:05:17 +00:00
double last_seek_pts;
player: fix recent speed change regression Commit 5afc025c broke this. The reason is that mpctx->delay is updated when a new video frame is added. This value is also needed to resync audio, but it will be for the wrong PTS. They must be consistent with each other, and if they aren't, initial sync will be off by N video frames, which results at least in worse user experience. This can be reproduced by for example heavily switching between normal and 2x speed, or similar. Fix by readding the video_next_pts field (keeping its use minimal, instead of reverting the commit that removed it).
2014-08-22 13:28:05 +00:00
// Mostly unused; for proper audio resync on speed changes.
double video_next_pts;
core: add --keep-open, which doesn't close the file on EOF The --keep-open option causes mpv not to close the current file. Instead, it will pause, and allow the user to seek around. When seeking beyond the end of the file, mpv does a precise seek back to the previous last known position that produced video output. In some corner cases, mpv might not be able to produce video output at all, despite having created a VO. (Possibly when only 1 frame could be decoded, but the video filter chain queues frames. Then a VO would be created, without sending an actual video frame to the VO.) In these cases, the VO window will not redraw, not even OSD. Based on a patch by coax [1]. [1] http://devel.mplayer2.org/ticket/210#comment:4
2012-11-12 23:56:20 +00:00
// As video_pts, but is not reset when seeking away. (For the very short
// period of time until a new frame is decoded and shown.)
double last_vo_pts;
mplayer: switch back to video PTS for reporting playback time The main problem with video PTS was that it wasn't very useful when playing audio files with cover art. Using the audio time instead was an obvious solution. Unfortunately, this leads to "inexact" reporting of the playback time in paused mode, and audio is always ahead by small, essentially random amounts of time ahead. This is possibly because the times reported by AOs are not entirely accurate when paused (see commit 9b3bf76). Switch back to video PTS, and use a simpler way to deal with the cover art case: if the video has ended, use the audio PTS. Also see commit f9a259e (and the commits referenced from there).
2013-04-03 23:18:19 +00:00
// Video PTS, or audio PTS if video has ended.
double playback_pts;
Move the sh_audio->delay field to mpctx->delay. The value is related to overall a/v sync and is not used by audio demuxers or decoders. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22506 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-03-11 06:16:14 +00:00
client API: add chapter change event Also works for mpv_observe_property() on the "chapter" property.
2014-04-27 20:28:07 +00:00
int last_chapter;
core: add backstep support Allows stepping back one frame via the frame_back_step inout command, bound to "," by default. This uses the precise seeking facility, and a perfect frame index built on the fly. The index is built during playback and precise seeking, and contains (as of this commit) the last 100 displayed or skipped frames. This index is used to find the PTS of the previous frame, which is then used as target for a precise seek. If no PTS is found, the core attempts to do a seek before the current frame, and skip decoded frames until the current frame is reached; this will create a sufficient index and the normal backstep algorithm can be applied. This can be rather slow. The worst case for backstepping is about the same as the worst case for precise seeking if the previous frame can be deduced from the index. If not, the worst case will be twice as slow. There's also some minor danger that the index is incorrect in case framedropping is involved. For framedropping due to --framedrop, this problem is ignored (use of --framedrop is discouraged anyway). For framedropping during precise seeking (done to make it faster), we try to not add frames to the index that are produced when this can happen. I'm not sure how well that works (or if the logic is sane), and it's sure to break with some video filters. In the worst case, backstepping might silently skip frames if you backstep after a user-initiated precise seek. (Precise seeks to do indexing are not affected.) Likewise, video filters that somehow change timing of frames and do not do this in a deterministic way (i.e. if you seek to a position, frames with different timings are produced than when the position is reached during normal playback) will make backstepping silently jump to the wrong frame. Enabling/disabling filters during playback (like for example deinterlacing) will have similar bad effects.
2013-04-24 17:31:48 +00:00
// History of video frames timestamps that were queued in the VO
// This includes even skipped frames during hr-seek
double vo_pts_history_pts[MAX_NUM_VO_PTS];
// Whether the PTS at vo_pts_history[n] is after a seek reset
uint64_t vo_pts_history_seek[MAX_NUM_VO_PTS];
uint64_t vo_pts_history_seek_ts;
uint64_t backstep_start_seek_ts;
bool backstep_active;
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
double audio_delay;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
double next_heartbeat;
player: cheap hack against idle event feedback loop The OSC used significant CPU time while the player was paused. It turned out that the "tick" event sent during pause is the problem. The OSC accesses the player core when receiving a tick event, which in turn will cause the core to send another tick event, leading to infinite feedback. Fix this by sending an idle tick only every 500ms. This is not very proper, but the idea behind the tick event isn't very clean to begin with (and the OSC should use timers instead).
2014-03-01 20:27:37 +00:00
double last_idle_tick;
client API: make "cache" property and similar observable Achieve this by polling. Will be used by the OSC. Basically a bad hack - but the point is that the mpv core itself is in the best position to improve this later.
2014-07-31 02:19:41 +00:00
double next_cache_update;
core: do mouse cursor hiding business in frontend Do this so that not every VO backend has to setup a timer for cursor hiding and interpret the --cursor-autohide option.
2013-05-16 21:17:46 +00:00
player: remove the last instances of polling Mouse cursor handling, --heartbeat-cmd, and OSD messages basically relied on polling. For this reason, the playloop always used a small timeout (not more than 500ms). Fix these cases, and raise the timeout to 100 seconds. There is no reason behind this number; for this specific purpose it's as close to infinity as any other number. On MS Windows, or if vo_sdl is used, the timeout remains very small. In these cases the GUI code doesn't do proper event handling in the first place, and fixing it requires much more effort. getch2_poll() still does polling, because as far as I'm aware no event- based way to detect this state change exists.
2014-07-18 13:04:46 +00:00
double sleeptime; // number of seconds to sleep before next iteration
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
double mouse_timer;
unsigned int mouse_event_ts;
mplayer: add --cursor-autohide-fs-only option This option makes the cursor always visible in windowed mode. Apparently, this is what (some?) Windows and OSX users expect. It's disabled by default for now. Restructure the cursor hide logic a bit for this purpose.
2013-09-08 00:46:19 +00:00
bool mouse_cursor_visible;
core: do mouse cursor hiding business in frontend Do this so that not every VO backend has to setup a timer for cursor hiding and interpret the --cursor-autohide option.
2013-05-16 21:17:46 +00:00
core: remove looping in update_video(), modify command handling a bit Let higher-level code call update_video() again instead of looping inside it until there's a frame ready to show. Change the conditions for running user commands somewhat. Overall effect shouldn't be that big. Now other commands can be executed after a seek before a video frame is decoded; in this case the seek target time may be used as the "current position".
2010-12-14 23:02:14 +00:00
// used to prevent hanging in some error cases
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
double start_timestamp;
Move the sh_audio->delay field to mpctx->delay. The value is related to overall a/v sync and is not used by audio demuxers or decoders. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22506 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-03-11 06:16:14 +00:00
timers: Remove GetRelativeTime() Move the code calculating time delta since last query out of the platform-specific drivers and into mplayer.c. The platform-specific drivers now return absolute values only. The way the code in timer-darwin.c uses doubles in wrapping arithmetic looks questionable and this change might make problems in it more visible.
2008-04-28 09:09:31 +00:00
// Timestamp from the last time some timing functions read the
video: display last frame, drain frames on video reconfig Until now, the player didn't care to drain frames on video reconfig. Instead, the VO was reconfigured (i.e. resized) before the queued frames finished displaying. This can for example be observed by passing multiple images with different size as mf:// filename. Then the window would resize one frame before image with the new size is displayed. With --vo=vdpau, the effect is worse, because this VO queues more than 1 frame internally. Fix this by explicitly draining buffered frames before video reconfig. Raise the display time of the last frame. Otherwise, the last frame would be shown for a very short time only. This usually doesn't matter, but helps when playing image files. This is a byproduct of frame draining, because normally, video timing is based on the frames queued to the VO, and we can't do that with frames of different size or format. So we pretend that the frame before the change is the last frame in order to time it. This code is incorrect though: it tries to use the framerate, which often doesn't make sense. But it's good enough to test this code with mf://.
2013-12-10 18:33:11 +00:00
// current time, in microseconds.
// Used to turn a new time value to a delta from last time.
Replace all calls to GetTimer()/GetTimerMS() GetTimer() is generally replaced with mp_time_us(). Both calls return microseconds, but the latter uses int64_t, us defined to never wrap, and never returns 0 or negative values. GetTimerMS() has no direct replacement. Instead the other functions are used. For some code, switch to mp_time_sec(), which returns the time as double float value in seconds. The returned time is offset to program start time, so there is enough precision left to deliver microsecond resolution for at least 100 years. Unless it's casted to a float (or the CPU reduces precision), which is why we still use mp_time_us() out of paranoia in places where precision is clearly needed. Always switch to the correct time. The whole point of the new timer calls is that they don't wrap, and storing microseconds in unsigned int variables would negate this. In some cases, remove wrap-around handling for time values.
2013-05-25 16:31:06 +00:00
int64_t last_time;
timers: Remove GetRelativeTime() Move the code calculating time delta since last query out of the platform-specific drivers and into mplayer.c. The platform-specific drivers now return absolute values only. The way the code in timer-darwin.c uses doubles in wrapping arithmetic looks questionable and this change might make problems in it more visible.
2008-04-28 09:09:31 +00:00
Move global rel_seek_secs and abs_seek_pos to mpctx
2008-04-21 03:17:22 +00:00
// Used to communicate the parameters of a seek between parts
core: add struct for queued seek info To prepare for the addition of exact seek support, add a struct for queued seek state and a helper function to update its state. It would have been cumbersome to update additional state (showing whether the seek is forced to be exact or non-exact) manually at every point that handles seeks.
2010-12-18 08:13:45 +00:00
struct seek_params {
mp_core: declare seek_type enum outside of nested struct cosmetic change. See previous commit.
2013-08-19 20:29:55 +00:00
enum seek_type type;
core: add struct for queued seek info To prepare for the addition of exact seek support, add a struct for queued seek state and a helper function to update its state. It would have been cumbersome to update additional state (showing whether the seek is forced to be exact or non-exact) manually at every point that handles seeks.
2010-12-18 08:13:45 +00:00
double amount;
int exact; // -1 = disable, 0 = default, 1 = enable
player: handle seek delays differently The code removed from handle_input_and_seek_coalesce() did two things: 1. If there's a queued seek, stop accepting non-seek commands, and delay them to the next playloop iteration. 2. If a seek is executing (i.e. the seek was unqueued, and now it's trying to decode and display the first video frame), stop accepting seek commands (and in fact all commands that were queued after the first seek command). This logic is disabled if seeking started longer than 300ms ago. (To avoid starvation.) I'm not sure why 1. would be needed. It's still possible that a command immediately executed after a seek command sees a "seeking in progress" state, because it affects queued seeks only, and not seeks in progress. Drop this code, since it can easily lead to input starvation, and I'm not aware of any disadvantages. The logic in 2. is good to make seeking behave much better, as it guarantees that the video display is updated frequently. Keep the core idea, but implement it differently. Now this logic is applied to seeks only. Commands after the seek can execute freely, and like with 1., I don't see a reason why they couldn't. However, in some cases, seeks are supposed to be executed instantly, so queue_seek() needs an additional parameter to signal the need for immediate update. One nice thing is that commands like sub_seek automatically profit from the seek delay logic. On the other hand, hitting chapter seek multiple times still does not update the video on chapter boundaries (as it should be). Note that the main goal of this commit is actually simplification of the input processing logic and to allow all commands to be executed immediately.
2014-02-07 21:29:50 +00:00
bool immediate; // disable seek delay logic
core: add struct for queued seek info To prepare for the addition of exact seek support, add a struct for queued seek state and a helper function to update its state. It would have been cumbersome to update additional state (showing whether the seek is forced to be exact or non-exact) manually at every point that handles seeks.
2010-12-18 08:13:45 +00:00
} seek;
Move global rel_seek_secs and abs_seek_pos to mpctx
2008-04-21 03:17:22 +00:00
core: track current chapter for relative chapter seeks Due to inexact seeks, chapter seek commands may result in a playback position that's inside the previous chapter. This causes problems when the user does repeated next-chapter/previous-chapter seeks, because the code will use the wrong base for calculating 'next' or 'previous'. Improve the behavior by adding a heuristic that keeps track of what chapter the user last wanted to seek to and adjusts the "current chapter" value based on that.
2010-04-25 20:20:34 +00:00
/* Heuristic for relative chapter seeks: keep track which chapter
* the user wanted to go to, even if we aren't exactly within the
* boundaries of that chapter due to an inaccurate seek. */
int last_chapter_seek;
double last_chapter_pts;
player: don't store subtitle renderer in osd_state This doesn't have much value. It can't be accessed by anything else than the actual subtitle renderer (sd_ass.c). sd_ass.c could create the renderer itself, except that we apparently want to save memory (and some font loading time) when using ordered chapters or multiple subtitle tracks.
2013-12-15 12:43:26 +00:00
/* Subtitle renderer. This is separate, because we want to keep fonts
* loaded across ordered chapters, instead of reloading and rescanning
* them on each transition. (Both of these objects contain this state.)
*/
struct ass_renderer *ass_renderer;
cleanup: subs: remove global ass_library variable
2011-07-22 22:55:13 +00:00
struct ass_library *ass_library;
sub/osd: mp_msg conversions
2013-12-21 18:06:37 +00:00
struct mp_log *ass_log;
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
int last_dvb_step;
core: simplify handling of --pause Rename the struct MPOpts "start_pause" field to "pause". Store the user- pause state in that field, so that both runtime pause toggling and the --pause switch change the same variable. Simplify the initialization of pause so that using --pause and changing the file while paused is exactly the same case (changing the file while paused doesn't unpause, this has been always this way). Also make it a bit more consistent. Before, starting with --pause would reset the pause state for every file, instead of following the usual semantics for option switches (compare with behavior of --fs).
2013-04-25 18:38:22 +00:00
bool paused;
Start pause handling changes Add separate pause_player() / unpause_player functions(), move some pausing-related state into explicit variables and make commands while paused not unpause. Not everything works properly while paused yet (no screen updates etc).
2008-11-29 06:09:57 +00:00
// step this many frames, then pause
int step_frames;
core: remove a number of global variables Move them into per-instance structs. This should get rid of all global variables in mplayer.c (not counting those referenced by cfg-mplayer.h). In core/input/ar.c, just remove checking the slave_mode variable. I'm not sure what this code was supposed to achieve, but slave mode is broken, slave mode is actually infeasible on OSX (ar.c is completely OSX specific), and the correct way of doing this would be to disable this input device per command line switch.
2013-03-08 01:08:02 +00:00
// Counted down each frame, stop playback if 0 is reached. (-1 = disable)
int max_frames;
core: output --playing-msg message only after at least one frame is shown This way it's possible to retrieve correct information about video, like actual width/height, which in general are available only after at least one frame has been sent to the video output, such as dwidth/dheight. mpv_identify.sh becomes a bit slower, because we let it decode enough audio and video to fill the audio buffers and to send one frame to the video output. Also, --playing-msg isn't shown anymore with --frames=0 (could be fixed by special-casing it, should this break any use cases). Note that in some corner cases, like when the demuxer for some reason returns lots of audio packets but no video packets at the start, but video actually starts later, the --playing-msg will still be output before video starts.
2013-03-25 22:44:32 +00:00
bool playing_msg_shown;
Add support for dvdnav still frames playback. Based on various patches from Otvos Attila and MPlayer'ized by me. N.B. Always use -vc ffmpeg12 with dvdnav:// git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25852 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-01-26 11:51:34 +00:00
core: simplify handling of --pause Rename the struct MPOpts "start_pause" field to "pause". Store the user- pause state in that field, so that both runtime pause toggling and the --pause switch change the same variable. Simplify the initialization of pause so that using --pause and changing the file while paused is exactly the same case (changing the file while paused doesn't unpause, this has been always this way). Also make it a bit more consistent. Before, starting with --pause would reset the pause state for every file, instead of following the usual semantics for option switches (compare with behavior of --fs).
2013-04-25 18:38:22 +00:00
bool paused_for_cache;
player: dynamically change cache wait times Remove the hardcoded wait time of 2 seconds. Instead, adjust the wait time each time we unpause: if downloading the data took longer than its estimated playback time, increase the amount of data we wait for. If it's shorter, decrease it. The +/- is supposed to avoid oscillating between two values if the elapsed time and the wait time are similar. It's not sure if this actually helps with anything, but it can't harm.
2014-08-27 21:12:24 +00:00
double cache_stop_time, cache_wait_time;
core: automatically pause on low cache When the cache fill status goes below a certain threshold, automatically pause the player. When the cache is filled again, unpause again. This is intended to help with streaming from http. It's better to pause a while, rather than exposing extremely crappy behavior when packet reads during decoding block the entire player. In theory, we should try to increase the cache if underruns happen too often. Unfortunately, changing the cache implementation would be very hard, because it's insane code (forks, uses shared memory and "volatile" etc.). So for now, this just reduces the frequency of the stuttering if the network is absolutely too slow to play the stream in realtime.
2012-12-01 23:22:54 +00:00
core: Rewrite some of the A/V sync related code Notable functionality changes: * Timing change between any two frames is now accurately limited to 1/10 of their nominal distance. Previous code did not always use the correct duration. * The status line now keeps showing the same A-V sync value from one video frame change to the next. Previously it kept recalculating the value using a new audio position but the same video position when the status line was updated between video frames. This incorrectly showed the video losing sync with audio. * The status line now displays actual measured A-V difference in autosync mode too. The previous code displayed values that completely ignored real timing in autosync mode, showing 0 A-V difference even when video was significantly behind audio due to inadequate decoding speed. The new behavior can make the shown A-V values appear more unstable if the audio out has unreliable delay measurements (the most likely reason to use autosync), but this is a display change rather than a timing quality change. * Autosync mode now tries to adjust timing by the amount of time vo_flip() calls take, so the calls start earlier and finish at the time the frame should be shown. Previously non-autosync mode adjusted for this but autosync did not. * The warning about the system being too slow to decode the video in realtime is now displayed in autosync mode too.
2008-12-08 18:04:08 +00:00
// Set after showing warning about decoding being too slow for realtime
// playback rate. Used to avoid showing it multiple times.
bool drop_message_shown;
core: add infrastructure to get screenshots from VOs Add a VO command (VOCTRL_SCREENSHOT) which requests a screenshot directly from the VO. If VO support is available, screenshots will be taken instantly (no more 1 or 2 frames delay). Taking screenshots when hardware decoding is in use will also work (vdpau). Additionally, the screenshots will now use the same colorspace as the video display. Change the central MPContext to be allocated with talloc so that it can be used as a talloc parent context. This commit does not yet implement the functionality for any VO (added in subsequent commits). The old screenshot video filter is not needed anymore if VO support is present, and in that case will not be used even if it is present in the filter chain. If VO support is not available then the filter is used like before. Note that the filter still has some of the old problems, such as delaying the screenshot by at least 1 frame.
2011-10-06 18:46:01 +00:00
struct screenshot_ctx *screenshot_ctx;
Add initial Lua scripting support This is preliminary. There are still tons of issues, and any aspect of scripting may change in the future. I decided to merge this (preliminary) work now because it makes it easier to develop it, not because it's done. lua.rst is clear enough about it (plus some sarcasm). This requires linking to Lua. Lua has no official pkg-config file, but there are distribution specific .pc files, all with different names. Adding a non-pkg-config based configure test was considered, but we'd rather not. One major complication is that libquvi links against Lua too, and if the Lua version is different from mpv's, you will get a crash as soon as libquvi uses Lua. (libquvi by design always runs when a file is opened.) I would consider this the problem of distros and whoever builds mpv, but to make things easier for users, we add a terrible runtime test to the configure script, which probes whether libquvi will crash. This is disabled when cross-compiling, but in that case we hope the user knows what he is doing.
2013-09-25 22:41:14 +00:00
struct command_ctx *command_ctx;
encode: video encoding now supported using mencoder-like options
2012-09-14 15:51:26 +00:00
struct encode_lavc_context *encode_lavc_ctx;
Revert "Remove DVD and Bluray support" This reverts commit 4b93210e0c244a65ef10a566abed2ad25ecaf9a1. *shrug*
2014-07-14 23:49:02 +00:00
struct mp_nav_state *nav_state;
input: implement JSON-based IPC protocol
2014-10-16 09:48:18 +00:00
ipc: decouple from MPContext Just a minor refactor to keep unneeded dependencies on the core low.
2014-10-19 14:44:33 +00:00
struct mp_ipc_ctx *ipc_ctx;
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
} MPContext;
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// audio.c
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
void reset_audio_state(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
void reinit_audio_chain(struct MPContext *mpctx);
int reinit_audio_filters(struct MPContext *mpctx);
double playing_audio_pts(struct MPContext *mpctx);
audio: cosmetics: remove unused return value
2014-07-29 22:24:57 +00:00
void fill_audio_out_buffers(struct MPContext *mpctx, double endpts);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
double written_audio_pts(struct MPContext *mpctx);
player: factor audio buffer clearing code Note that the change in seek_reset is not entirely equivalent: we even drop the remainder of buffered audio when seeking. This should be more correct, because the whole point of the reset_ao parameter is to control whether audio queued for output should be dropped or not.
2013-11-08 19:02:09 +00:00
void clear_audio_output_buffers(struct MPContext *mpctx);
command: move setting playback speed to a separate function
2014-10-02 00:49:05 +00:00
void set_playback_speed(struct MPContext *mpctx, double new_speed);
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
void uninit_audio_out(struct MPContext *mpctx);
void uninit_audio_chain(struct MPContext *mpctx);
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// configfiles.c
player: remove some minor code duplication in config loader code It's better to keep the logic in one place. Also drop that a broken config file aborts loading of the player. I don't see much reason for this, and it inflates the code slightly.
2014-06-26 15:56:47 +00:00
void mp_parse_cfgfiles(struct MPContext *mpctx);
path lookup functions: mp_msg conversions There's a single mp_msg() in path.c, but all path lookup functions seem to depend on it, so we get a rat-tail of stuff we have to change. This is probably a good thing though, because we can have the path lookup functions also access options, so we could allow overriding the default config path, or ignore the MPV_HOME environment variable, and such things. Also take the chance to consistently add talloc_ctx parameters to the path lookup functions. Also, this change causes a big mess on configfiles.c. It's the same issue: everything suddenly needs a (different) context argument. Make it less wild by providing a mp_load_auto_profiles() function, which isolates most of it to configfiles.c.
2013-12-21 19:45:19 +00:00
void mp_load_auto_profiles(struct MPContext *mpctx);
config: don't save options to resume-config that didn't change This is approximate: we read each option value on program start (before starting playback of a file), and when writing the resume config, compare each value to the current state. This also means when a value is changed and then changed back, it's not stored. In particular, option values set in config files and on the command line are considered the default. This should help reducing the numbers of options overridden by the resume config. If too much is overridden, it becomes an inconvenience, because changes in config files will apparently have no effect when resuming a file. Also see github issue #574.
2014-02-25 21:34:32 +00:00
void mp_get_resume_defaults(struct MPContext *mpctx);
path lookup functions: mp_msg conversions There's a single mp_msg() in path.c, but all path lookup functions seem to depend on it, so we get a rat-tail of stuff we have to change. This is probably a good thing though, because we can have the path lookup functions also access options, so we could allow overriding the default config path, or ignore the MPV_HOME environment variable, and such things. Also take the chance to consistently add talloc_ctx parameters to the path lookup functions. Also, this change causes a big mess on configfiles.c. It's the same issue: everything suddenly needs a (different) context argument. Make it less wild by providing a mp_load_auto_profiles() function, which isolates most of it to configfiles.c.
2013-12-21 19:45:19 +00:00
void mp_load_playback_resume(struct MPContext *mpctx, const char *file);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
void mp_write_watch_later_conf(struct MPContext *mpctx);
path lookup functions: mp_msg conversions There's a single mp_msg() in path.c, but all path lookup functions seem to depend on it, so we get a rat-tail of stuff we have to change. This is probably a good thing though, because we can have the path lookup functions also access options, so we could allow overriding the default config path, or ignore the MPV_HOME environment variable, and such things. Also take the chance to consistently add talloc_ctx parameters to the path lookup functions. Also, this change causes a big mess on configfiles.c. It's the same issue: everything suddenly needs a (different) context argument. Make it less wild by providing a mp_load_auto_profiles() function, which isolates most of it to configfiles.c.
2013-12-21 19:45:19 +00:00
struct playlist_entry *mp_check_playlist_resume(struct MPContext *mpctx,
struct playlist *playlist);
Split command/property handling from mplayer.c to a new file command.c. Move some global and static variables under a struct that can be given as a parameter. Add a context argument to the property functions so that they do not have to depend on global/static variables. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@22298 b3059339-0415-0410-9bf9-f77b7e298cf2
2007-02-21 00:49:24 +00:00
Revert "Remove DVD and Bluray support" This reverts commit 4b93210e0c244a65ef10a566abed2ad25ecaf9a1. *shrug*
2014-07-14 23:49:02 +00:00
// discnav.c
void mp_nav_init(struct MPContext *mpctx);
void mp_nav_reset(struct MPContext *mpctx);
void mp_nav_destroy(struct MPContext *mpctx);
void mp_nav_user_input(struct MPContext *mpctx, char *command);
void mp_handle_nav(struct MPContext *mpctx);
int mp_nav_in_menu(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// loadfile.c
Remove static mpctx from mplayer.c Pass it in function calls instead. There's no reasonable way to pass it to exit_player() when used outside mplayer.c. However most of those uses seem to be wrong (the code should not make the program exit) and should be removed. For now just make exit_player() uses outside mplayer.c simply call exit() without any shutdown code.
2008-04-21 03:07:22 +00:00
void uninit_player(struct MPContext *mpctx, unsigned int mask);
mplayer: remove unused mp_add_subtitles() parameter
2013-09-07 18:19:57 +00:00
struct track *mp_add_subtitles(struct MPContext *mpctx, char *filename);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
void mp_switch_track(struct MPContext *mpctx, enum stream_type type,
struct track *track);
player: add infrastructure to select multiple tracks at once Of course this does not allow decoding multiple tracks at once; it just adds some minor infrastructure, which could be used to achieve this.
2013-12-24 16:46:08 +00:00
void mp_switch_track_n(struct MPContext *mpctx, int order,
enum stream_type type, struct track *track);
player: redo demuxer stream selection Use struct track to decide what stream to select. Add a "selected" field and use that in some places instead of checking mpctx->current_track.
2013-12-23 19:14:54 +00:00
void mp_deselect_track(struct MPContext *mpctx, struct track *track);
player: make separation between user/automatic track selection stronger For example, consider the case when audio initialization fails. Then the audio track is deselected. Before this commit, this would have been equivalent to the user disabling audio. This is bad when multiple files are played at once (the next file would have audio disabled, even if it works), or if playback resume is used (if e.g. audio output failed to initialize, then audio would be disabled when resuming, even if the system's audio driver was fixed).
2014-03-03 22:53:12 +00:00
void mp_mark_user_track_selection(struct MPContext *mpctx, int order,
enum stream_type type);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
struct track *mp_track_by_tid(struct MPContext *mpctx, enum stream_type type,
int tid);
bool timeline_set_part(struct MPContext *mpctx, int i, bool force);
double timeline_set_from_time(struct MPContext *mpctx, double pts, bool *need_reset);
void add_demuxer_tracks(struct MPContext *mpctx, struct demuxer *demuxer);
bool mp_remove_track(struct MPContext *mpctx, struct track *track);
struct playlist_entry *mp_next_file(struct MPContext *mpctx, int direction,
bool force);
void mp_set_playlist_entry(struct MPContext *mpctx, struct playlist_entry *e);
void mp_play_files(struct MPContext *mpctx);
demux: add a demuxer thread This adds a thread to the demuxer which reads packets asynchronously. It will do so until a configurable minimum packet queue size is reached. (See options.rst additions.) For now, the thread is disabled by default. There are some corner cases that have to be fixed, such as fixing cache behavior with webradios. Note that most interaction with the demuxer is still blocking, so if e.g. network dies, the player will still freeze. But this change will make it possible to remove most causes for freezing. Most of the new code in demux.c actually consists of weird caches to compensate for thread-safety issues (with the previously single-threaded design), or to avoid blocking by having to wait on the demuxer thread. Most of the changes in the player are due to the fact that we must not access the source stream directly. the demuxer thread already accesses it, and the stream stuff is not thread-safe. For timeline stuff (like ordered chapters), we enable the thread for the current segment only. We also clear its packet queue on seek, so that the remaining (unconsumed) readahead buffer doesn't waste memory. Keep in mind that insane subtitles (such as ASS typesetting muxed into mkv files) will practically disable the readahead, because the total queue size is considered when checking whether the minimum queue size was reached.
2014-07-16 20:40:21 +00:00
void update_demuxer_properties(struct MPContext *mpctx);
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
void reselect_demux_streams(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// main.c
build: add option to build a library This library will export the client API functions. Note that this doesn't allow compiling the command line player to link against this library yet. The reason is that there's lots of weird stuff required to setup the execution environment (mostly Windows and OSX specifics), as well as things which are out of scope of the client API and every application has to do on its own. However, since the mpv command line player basically reuses functions from the mpv core to implement these things, it's not very easy to separate the command line player form the mpv core.
2014-02-10 20:25:22 +00:00
int mpv_main(int argc, char *argv[]);
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
int mp_initialize(struct MPContext *mpctx);
struct MPContext *mp_create(void);
void mp_destroy(struct MPContext *mpctx);
m_option, m_config: mp_msg conversions Always pass around mp_log contexts in the option parser code. This of course affects all users of this API as well. In stream.c, pass a mp_null_log, because we can't do it properly yet. This will be fixed later.
2013-12-21 18:45:42 +00:00
void mp_print_version(struct mp_log *log, int always);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// misc.c
double get_start_time(struct MPContext *mpctx);
double get_main_demux_pts(struct MPContext *mpctx);
player: use virtual time for --audio-file with ordered chapters Apparently users prefer this behavior. It was used for subtitles too, so move the code to calculate the video offset into a separate function. Seeking also needs to be fixed. Fixes #1018.
2014-08-15 21:32:37 +00:00
double get_track_video_offset(struct MPContext *mpctx, struct track *track);
player: use MP_NOPTS_VALUE as rel_time_to_abs() error value And consistently use MP_NOPTS_VALUE as error value for the users of this function. This is better than using -1, especially because negative values can be valid timestamps.
2014-03-25 01:32:24 +00:00
double rel_time_to_abs(struct MPContext *mpctx, struct m_rel_time t);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
double get_play_end_pts(struct MPContext *mpctx);
double get_relative_time(struct MPContext *mpctx);
player: add --merge-files option
2013-11-19 21:36:33 +00:00
void merge_playlist_files(struct playlist *pl);
command: change cache perentage to float, add cache-free and cache-used
2014-07-01 22:14:30 +00:00
float mp_get_cache_percent(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
bool mp_get_cache_idle(struct MPContext *mpctx);
player: set PulseAudio stream title to window title Set the PulseAudio stream title, just like the VO window title is set. Refactor update_vo_window_title() so that we can use it for AOs too. The ao_pulse.c bit is stolen from MPlayer.
2013-11-09 23:49:13 +00:00
void update_window_title(struct MPContext *mpctx, bool force);
player: fix exiting if both audio and video fail initializing The player was supposed to exit playback if both video and audio failed to initialize (or if one of the streams was not selected when the other stream failed). This didn't work; for one this check was missing from one of the failure paths. And more importantly, both checked the current_track array incorrectly. Fix these issues, and move the failure handling code into a common function. CC: @mpv-player/stable
2014-10-23 16:31:43 +00:00
void error_on_track(struct MPContext *mpctx, struct track *track);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
void stream_dump(struct MPContext *mpctx);
player: open stream and demuxer asynchronously Run opening the stream and opening the demuxer in a separate thread. This should remove the last code paths in which the player can normally get blocked on network. When the stream is opened, the player will still react to input and so on. Commands to abort opening can also be handled properly, instead of using some of the old hacks in input.c. The only thing the user can really do is aborting loading by navigating the playlist or quitting. Whether playback abort works depends on the stream implementation; with normal network, this will depend on what libavformat (via "interrupt" callback) does. Some pain is caused by DVD/BD/DVB. These want to reload the demuxer sometimes. DVB wants it in order to discard old, inactive streams. DVD/BD for the same reason, and also for reloading stream languages and similar metadata. This means the stream and the demuxer have to be loaded separately. One minor detail is that we now need to copy all global options. This wasn't really needed before, because the options were accessed on opening only, but since opening is now on a separate thread, this obviously becomes a necessity.
2014-10-06 19:20:38 +00:00
int mpctx_run_non_blocking(struct MPContext *mpctx, void (*thread_fn)(void *arg),
void *thread_arg);
struct mpv_global *create_sub_global(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// osd.c
command: simplify OSD property display code Probably not many user-visible changes. One notable change is that the terminal OSD code for OSD bar fallback handling is removed with no replacement. Instead, terminal OSD gets the same text message as normal OSD. For volume, this is ok, because the text message is reasonable. Other properties will look worse, but could be adjusted, and there are in fact no other such properties that would be useful in audio-only mode. The fallback message for seeking falls away as well, but that message was useless anyway - the terminal status line provides all information anyway. I believe the show_property_osd() code is now much easier to follow.
2014-09-21 21:40:45 +00:00
void set_osd_bar(struct MPContext *mpctx, int type,
player: show "neutral" position markers for OSD bars This commit implements them for volume and some video properties.
2014-06-08 21:52:58 +00:00
double min, double max, double neutral, double val);
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
bool set_osd_msg(struct MPContext *mpctx, int level, int time,
player: remove OSD message IDs These were needed before the last commit, but now they don't do anything anymore. (They were used to decide whether to replace or stack the previous OSD message when a new one was displayed.)
2014-01-17 21:34:47 +00:00
const char* fmt, ...) PRINTF_ATTRIBUTE(4,5);
player: merge mp_osd.h into mp_core.h Just doing this because mp_osd.h and osd.c is not consistent. There are some other header files (command.h and screenshot.h), but since I don't feel too good about inflating mp_core.h, I'm not merging them, at least not yet.
2013-10-30 20:47:14 +00:00
void set_osd_function(struct MPContext *mpctx, int osd_function);
void set_osd_subtitle(struct MPContext *mpctx, const char *text);
command: add osd-sym-cc property This allows you to reproduce the OSD symbol.
2014-09-17 22:12:59 +00:00
void get_current_osd_sym(struct MPContext *mpctx, char *buf, size_t buf_size);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// playloop.c
player: minor refactoring Expose the central event handling functions explicitly, so that other parts of the player can use them. No functional changes. Preparation for the next commit.
2014-09-06 14:57:46 +00:00
void mp_wait_events(struct MPContext *mpctx, double sleeptime);
void mp_process_input(struct MPContext *mpctx);
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
void reset_playback_state(struct MPContext *mpctx);
client API: remove mpv_event_pause_reason And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE. The real pause state can now be queried with the "core-idle" property, the user pause state with the "pause" property, whether the player is paused due to cache with "paused-for-cache", and the keep open event can be guessed with the "eof-reached" property.
2014-04-14 20:33:41 +00:00
void pause_player(struct MPContext *mpctx);
void unpause_player(struct MPContext *mpctx);
core: add backstep support Allows stepping back one frame via the frame_back_step inout command, bound to "," by default. This uses the precise seeking facility, and a perfect frame index built on the fly. The index is built during playback and precise seeking, and contains (as of this commit) the last 100 displayed or skipped frames. This index is used to find the PTS of the previous frame, which is then used as target for a precise seek. If no PTS is found, the core attempts to do a seek before the current frame, and skip decoded frames until the current frame is reached; this will create a sufficient index and the normal backstep algorithm can be applied. This can be rather slow. The worst case for backstepping is about the same as the worst case for precise seeking if the previous frame can be deduced from the index. If not, the worst case will be twice as slow. There's also some minor danger that the index is incorrect in case framedropping is involved. For framedropping due to --framedrop, this problem is ignored (use of --framedrop is discouraged anyway). For framedropping during precise seeking (done to make it faster), we try to not add frames to the index that are produced when this can happen. I'm not sure how well that works (or if the logic is sane), and it's sure to break with some video filters. In the worst case, backstepping might silently skip frames if you backstep after a user-initiated precise seek. (Precise seeks to do indexing are not affected.) Likewise, video filters that somehow change timing of frames and do not do this in a deterministic way (i.e. if you seek to a position, frames with different timings are produced than when the position is reached during normal playback) will make backstepping silently jump to the wrong frame. Enabling/disabling filters during playback (like for example deinterlacing) will have similar bad effects.
2013-04-24 17:31:48 +00:00
void add_step_frame(struct MPContext *mpctx, int dir);
core: add struct for queued seek info To prepare for the addition of exact seek support, add a struct for queued seek state and a helper function to update its state. It would have been cumbersome to update additional state (showing whether the seek is forced to be exact or non-exact) manually at every point that handles seeks.
2010-12-18 08:13:45 +00:00
void queue_seek(struct MPContext *mpctx, enum seek_type type, double amount,
player: handle seek delays differently The code removed from handle_input_and_seek_coalesce() did two things: 1. If there's a queued seek, stop accepting non-seek commands, and delay them to the next playloop iteration. 2. If a seek is executing (i.e. the seek was unqueued, and now it's trying to decode and display the first video frame), stop accepting seek commands (and in fact all commands that were queued after the first seek command). This logic is disabled if seeking started longer than 300ms ago. (To avoid starvation.) I'm not sure why 1. would be needed. It's still possible that a command immediately executed after a seek command sees a "seeking in progress" state, because it affects queued seeks only, and not seeks in progress. Drop this code, since it can easily lead to input starvation, and I'm not aware of any disadvantages. The logic in 2. is good to make seeking behave much better, as it guarantees that the video display is updated frequently. Keep the core idea, but implement it differently. Now this logic is applied to seeks only. Commands after the seek can execute freely, and like with 1., I don't see a reason why they couldn't. However, in some cases, seeks are supposed to be executed instantly, so queue_seek() needs an additional parameter to signal the need for immediate update. One nice thing is that commands like sub_seek automatically profit from the seek delay logic. On the other hand, hitting chapter seek multiple times still does not update the video on chapter boundaries (as it should be). Note that the main goal of this commit is actually simplification of the input processing logic and to allow all commands to be executed immediately.
2014-02-07 21:29:50 +00:00
int exact, bool immediate);
core: refactor seek_chapter() function Makes it easier to understand... maybe. It's still pretty strange how this function may either queue the seek or seek immediately. The way it actually works doesn't change, queuing the seek is just moved into the function. Also add a execute_queued_seek() function, which resets the queue state correctly.
2013-05-03 22:36:53 +00:00
bool mp_seek_chapter(struct MPContext *mpctx, int chapter);
core: move video pos/length query functions from demux to core Move functions to query current playback position, percentage position and total video length from from the demuxer layer to top level. The functions need access to playback state that doesn't belong on the demuxing level. Make the new functions more capable and simplify some code that can now rely on them. This fixes some errors in displayed in OSD and slave mode information when using timeline (ordered chapters).
2010-11-07 22:54:32 +00:00
double get_time_length(struct MPContext *mpctx);
double get_current_time(struct MPContext *mpctx);
player: make the time display relative to start PTS This commit makes the playback start time always at time 0. Signed-off-by: wm4 <wm4@nowhere>
2014-06-29 17:27:46 +00:00
double get_playback_time(struct MPContext *mpctx);
core: move video pos/length query functions from demux to core Move functions to query current playback position, percentage position and total video length from from the demuxer layer to top level. The functions need access to playback state that doesn't belong on the demuxing level. Make the new functions more capable and simplify some code that can now rely on them. This fixes some errors in displayed in OSD and slave mode information when using timeline (ordered chapters).
2010-11-07 22:54:32 +00:00
int get_percent_pos(struct MPContext *mpctx);
encoding: use --start for ratios, etc. Note: this currently only works for formats without pts resets. Other formats will ignore this code.
2013-06-20 10:15:36 +00:00
double get_current_pos_ratio(struct MPContext *mpctx, bool use_range);
Support chapter seeking with ordered chapters
2009-04-02 02:00:22 +00:00
int get_current_chapter(struct MPContext *mpctx);
char *chapter_display_name(struct MPContext *mpctx, int chapter);
core, demux: fix --identify chapter output with ordered chapters Information about individual chapters was printed during demuxer opening phase, and total chapter count (ID_CHAPTERS) was printed according to mpctx->demuxer->num_chapters. When playing a file with ordered chapters, this meant that chapter information about every source file was printed individually (even though only the chapters from the first file would be used for playback) and the total chapter count could be wrong. Remove the printing of chapter information from the demuxer layer and print the chapter information and count actually used for playback in core print_file_properties(). Also somewhat simplify the internal chapters API and remove possible inconsistencies.
2011-10-23 02:51:44 +00:00
char *chapter_name(struct MPContext *mpctx, int chapter);
double chapter_start_time(struct MPContext *mpctx, int chapter);
int get_chapter_count(struct MPContext *mpctx);
command: add cache-buffering-state property
2014-10-07 20:07:07 +00:00
double get_cache_buffering_percentage(struct MPContext *mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
void execute_queued_seek(struct MPContext *mpctx);
void run_playloop(struct MPContext *mpctx);
player: open stream and demuxer asynchronously Run opening the stream and opening the demuxer in a separate thread. This should remove the last code paths in which the player can normally get blocked on network. When the stream is opened, the player will still react to input and so on. Commands to abort opening can also be handled properly, instead of using some of the old hacks in input.c. The only thing the user can really do is aborting loading by navigating the playlist or quitting. Whether playback abort works depends on the stream implementation; with normal network, this will depend on what libavformat (via "interrupt" callback) does. Some pain is caused by DVD/BD/DVB. These want to reload the demuxer sometimes. DVB wants it in order to discard old, inactive streams. DVD/BD for the same reason, and also for reloading stream languages and similar metadata. This means the stream and the demuxer have to be loaded separately. One minor detail is that we now need to copy all global options. This wasn't really needed before, because the options were accessed on opening only, but since opening is now on a separate thread, this obviously becomes a necessity.
2014-10-06 19:20:38 +00:00
void mp_idle(struct MPContext *mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
void idle_loop(struct MPContext *mpctx);
void handle_force_window(struct MPContext *mpctx, bool reconfig);
void add_frame_pts(struct MPContext *mpctx, double pts);
core: ordered chapters: move timeline creation to timeline/ Add new file timeline/tl_matroska.c. Move the code that parses ordered chapter information from Matroska files and creates the timeline structure based on that to the new file. Initialize the format parameter given to open_stream() in the moved code. The previous uninitialized value shouldn't have caused any visible effects.
2011-02-14 07:34:39 +00:00
player: reorganize how lua scripts are loaded Make loading of scripts independent of Lua. Move some of the loading code from lua.c to scripting.c, and make it easier to add new scripting backends.
2014-05-12 23:14:07 +00:00
// scripting.c
struct mp_scripting {
const char *file_ext; // e.g. "lua"
int (*load)(struct mpv_handle *client, const char *filename);
};
void mp_load_scripts(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// sub.c
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
void reset_subtitle_state(struct MPContext *mpctx);
player: add --secondary-sid for displaying a second subtitle stream This is relatively hacky, but it's Christmas, so it's ok. This does two things: 1. allow selecting two subtitle tracks, and 2. include a hack that renders the second subtitle always as toptitle. See manpage additions how to use this.
2013-12-24 16:46:14 +00:00
void reset_subtitles(struct MPContext *mpctx, int order);
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
void uninit_stream_sub_decoders(struct demuxer *demuxer);
player: add --secondary-sid for displaying a second subtitle stream This is relatively hacky, but it's Christmas, so it's ok. This does two things: 1. allow selecting two subtitle tracks, and 2. include a hack that renders the second subtitle always as toptitle. See manpage additions how to use this.
2013-12-24 16:46:14 +00:00
void reinit_subs(struct MPContext *mpctx, int order);
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
void uninit_sub(struct MPContext *mpctx, int order);
void uninit_sub_all(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
void update_osd_msg(struct MPContext *mpctx);
void update_subtitles(struct MPContext *mpctx);
player: move some libass setup code to sub.c Also recreate ASS_Library on every file played. This means we can move the code out of main.c as well. Recreating the ASS_Library object has no disadvantages, because it literally stores only the message callback, the (per-file) font attachment as byte arrays, and the set of style overrides. Hopefully this thing can be removed from the libass API entirely at some point. The only reason why the player core creates the ASS_Renderer, instead of the subtitle renderer, is because we want to cache the loaded fonts across ordered chapter transitions, so this probably still has to stay around for now.
2014-10-03 20:32:16 +00:00
void init_sub_renderer(struct MPContext *mpctx);
void uninit_sub_renderer(struct MPContext *mpctx);
sub: remove osd_get_sub() Trades one strange thing against another, but seems slightly less strange.
2014-10-31 22:59:10 +00:00
void get_osd_sub_state(struct MPContext *mpctx, int order,
struct osd_sub_state *out_state);
core: make options.c compile standalone This also removes the split between "mplayer" and "common" opts (common opts used to be shared between mencoder and mplayer).
2013-06-07 20:57:00 +00:00
core: ordered chapters: move timeline creation to timeline/ Add new file timeline/tl_matroska.c. Move the code that parses ordered chapter information from Matroska files and creates the timeline structure based on that to the new file. Initialize the format parameter given to open_stream() in the moved code. The previous uninitialized value shouldn't have caused any visible effects.
2011-02-14 07:34:39 +00:00
// timeline/tl_matroska.c
void build_ordered_chapter_timeline(struct MPContext *mpctx);
timeline: add new EDL format Edit Decision Lists (EDL) allow combining parts from multiple source files into one virtual file. MPlayer had an EDL format (which sucked), which mplayer2 tried to improve with its own format (which sucked). As logic demands, mpv introduces its very own format (which sucks). The new format should actually be much simpler and easier to use, and its implementation is simpler and smaller too.
2013-11-19 21:23:41 +00:00
// timeline/tl_mpv_edl.c
void build_mpv_edl_timeline(struct MPContext *mpctx);
core: add new support for reading .cue files Playing a .cue file directly will now parse the .cue file, and load and play the file(s) referenced in the cue. If multiple files are referenced, a timeline including all files will be created to create the impression of a single, flat audio file containing all the tracks. For each track, a chapter is created. The chapter navigation commands can be used to jump between tracks. The chapter titles will use the string provided by the track's TITLE cue command. (The -identify command can be used to print all chapters in a not so user friendly way.) Other than the chapter names, there is no attempt at displaying or exposing any other meta data contained in the cue files yet. The handling (or lack of thereof) of gaps (track pregaps and postgaps) is probably not correct yet. In general, mplayer's mapping of tracks to the source audio files can be verified by examining the timeline, which will be printed when passing the -v switch. Note that this has nothing to do with the old cue:// support. The old code isn't touched, and is still only able to play .cue/.bin pairs. Prefixing a .cue file with cue:// will always invoke the old code, while playing a .cue file directly (i.e. "mplayer file.cue") will always use the new code. Playing audio images (.cue/.bin pairs of files) doesn't work yet.
2012-01-01 16:45:24 +00:00
// timeline/tl_cue.c
void build_cue_timeline(struct MPContext *mpctx);
core: ordered chapters: move timeline creation to timeline/ Add new file timeline/tl_matroska.c. Move the code that parses ordered chapter information from Matroska files and creates the timeline structure based on that to the new file. Initialize the format parameter given to open_stream() in the moved code. The previous uninitialized value shouldn't have caused any visible effects.
2011-02-14 07:34:39 +00:00
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
// video.c
player: split seek_reset() This also reduces some code duplication with other parts of the code. The changfe is mostly cosmetic, although there are also some subtle changes in behavior. At least one change is that the big desync message is now printed after every seek.
2014-07-30 21:01:55 +00:00
void reset_video_state(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
int reinit_video_chain(struct MPContext *mpctx);
int reinit_video_filters(struct MPContext *mpctx);
player: move video display code out of the playloop Basically move the code from playloop.c to video.c. The new function write_video() now contains the code that was part of run_playloop(). There are no functional changes, except handling "new_frame_shown" slightly differently. This is done so that we don't need new a new MPContext field or a return value for write_video() to signal this condition. Instead, it's handled indirectly.
2014-07-30 21:24:08 +00:00
void write_video(struct MPContext *mpctx, double endpts);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
void mp_force_video_refresh(struct MPContext *mpctx);
void update_fps(struct MPContext *mpctx);
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
void uninit_video_out(struct MPContext *mpctx);
void uninit_video_chain(struct MPContext *mpctx);
mp_core: sort function prototypes by source file I considered making a header file for each .c file, but decided against it. Asking around, not making separate headers was deemed acceptable. In the end, all of these depend on MPContext and store state inside of it, so separate headers aren't all that useful anyway.
2013-10-30 20:38:30 +00:00
Add MPLAYER_ prefix to multiple inclusion guards. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26061 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-02-22 09:09:46 +00:00
#endif /* MPLAYER_MP_CORE_H */
Reference in New Issue Copy Permalink