mpv/video/out/opengl/context_rpi.c

328 lines
8.8 KiB
C
Raw Normal View History

RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
/*
* This file is part of mpv.
*
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
*
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
*/
#include <stddef.h>
#include <assert.h>
#include <bcm_host.h>
#include <EGL/egl.h>
#include <EGL/eglext.h>
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
#include "common/common.h"
#include "osdep/atomic.h"
#include "video/out/win_state.h"
#include "context.h"
#include "egl_helpers.h"
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
struct priv {
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
struct GL gl;
DISPMANX_DISPLAY_HANDLE_T display;
DISPMANX_ELEMENT_HANDLE_T window;
DISPMANX_UPDATE_HANDLE_T update;
EGLDisplay egl_display;
EGLConfig egl_config;
EGLContext egl_context;
EGLSurface egl_surface;
// yep, the API keeps a pointer to it
EGL_DISPMANX_WINDOW_T egl_window;
int x, y, w, h;
double display_fps;
atomic_int reload_display;
int win_params[4];
};
static void tv_callback(void *callback_data, uint32_t reason, uint32_t param1,
uint32_t param2)
{
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
struct ra_ctx *ctx = callback_data;
struct priv *p = ctx->priv;
atomic_store(&p->reload_display, true);
vo_wakeup(ctx->vo);
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
static void destroy_dispmanx(struct ra_ctx *ctx)
{
struct priv *p = ctx->priv;
if (p->egl_surface) {
eglMakeCurrent(p->egl_display, EGL_NO_SURFACE, EGL_NO_SURFACE,
EGL_NO_CONTEXT);
eglDestroySurface(p->egl_display, p->egl_surface);
p->egl_surface = EGL_NO_SURFACE;
}
if (p->window)
vc_dispmanx_element_remove(p->update, p->window);
p->window = 0;
if (p->display)
vc_dispmanx_display_close(p->display);
p->display = 0;
if (p->update)
vc_dispmanx_update_submit_sync(p->update);
p->update = 0;
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
static void rpi_uninit(struct ra_ctx *ctx)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
{
struct priv *p = ctx->priv;
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
ra_gl_ctx_uninit(ctx);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
vc_tv_unregister_callback_full(tv_callback, ctx);
destroy_dispmanx(ctx);
if (p->egl_context)
eglDestroyContext(p->egl_display, p->egl_context);
p->egl_context = EGL_NO_CONTEXT;
eglReleaseThread();
p->egl_display = EGL_NO_DISPLAY;
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
static bool recreate_dispmanx(struct ra_ctx *ctx)
{
struct priv *p = ctx->priv;
int display_nr = 0;
int layer = 0;
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_VERBOSE(ctx, "Recreating DISPMANX state...\n");
destroy_dispmanx(ctx);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
p->display = vc_dispmanx_display_open(display_nr);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
p->update = vc_dispmanx_update_start(0);
if (!p->display || !p->update) {
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_FATAL(ctx, "Could not get DISPMANX objects.\n");
goto fail;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
}
uint32_t dispw, disph;
if (graphics_get_display_size(0, &dispw, &disph) < 0) {
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_FATAL(ctx, "Could not get display size.\n");
goto fail;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
}
p->w = dispw;
p->h = disph;
if (ctx->vo->opts->fullscreen) {
p->x = p->y = 0;
} else {
struct vo_win_geometry geo;
struct mp_rect screenrc = {0, 0, p->w, p->h};
vo_calc_window_geometry(ctx->vo, &screenrc, &geo);
mp_rect_intersection(&geo.win, &screenrc);
p->x = geo.win.x0;
p->y = geo.win.y0;
p->w = geo.win.x1 - geo.win.x0;
p->h = geo.win.y1 - geo.win.y0;
}
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
// dispmanx is like a neanderthal version of Wayland - you can add an
// overlay any place on the screen.
VC_RECT_T dst = {.x = p->x, .y = p->y, .width = p->w, .height = p->h};
VC_RECT_T src = {.width = p->w << 16, .height = p->h << 16};
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
VC_DISPMANX_ALPHA_T alpha = {
2019-07-14 13:56:10 +00:00
.flags = DISPMANX_FLAGS_ALPHA_FIXED_ALL_PIXELS,
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
.opacity = 0xFF,
};
p->window = vc_dispmanx_element_add(p->update, p->display, layer, &dst, 0,
&src, DISPMANX_PROTECTION_NONE, &alpha,
0, 0);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
if (!p->window) {
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_FATAL(ctx, "Could not add DISPMANX element.\n");
goto fail;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
}
vc_dispmanx_update_submit_sync(p->update);
p->update = vc_dispmanx_update_start(0);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
p->egl_window = (EGL_DISPMANX_WINDOW_T){
.element = p->window,
.width = p->w,
.height = p->h,
};
p->egl_surface = eglCreateWindowSurface(p->egl_display, p->egl_config,
&p->egl_window, NULL);
if (p->egl_surface == EGL_NO_SURFACE) {
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_FATAL(ctx, "Could not create EGL surface!\n");
goto fail;
}
if (!eglMakeCurrent(p->egl_display, p->egl_surface, p->egl_surface,
p->egl_context))
{
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_FATAL(ctx, "Failed to set context!\n");
goto fail;
}
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
p->display_fps = 0;
TV_GET_STATE_RESP_T tvstate;
TV_DISPLAY_STATE_T tvstate_disp;
if (!vc_tv_get_state(&tvstate) && !vc_tv_get_display_state(&tvstate_disp)) {
if (tvstate_disp.state & (VC_HDMI_HDMI | VC_HDMI_DVI)) {
p->display_fps = tvstate_disp.display.hdmi.frame_rate;
HDMI_PROPERTY_PARAM_T param = {
.property = HDMI_PROPERTY_PIXEL_CLOCK_TYPE,
};
if (!vc_tv_hdmi_get_property(&param) &&
param.param1 == HDMI_PIXEL_CLOCK_TYPE_NTSC)
p->display_fps = p->display_fps / 1.001;
} else {
p->display_fps = tvstate_disp.display.sdtv.frame_rate;
}
}
p->win_params[0] = display_nr;
p->win_params[1] = layer;
p->win_params[2] = p->x;
p->win_params[3] = p->y;
ctx->vo->dwidth = p->w;
ctx->vo->dheight = p->h;
if (ctx->swapchain)
ra_gl_ctx_resize(ctx->swapchain, p->w, p->h, 0);
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
ctx->vo->want_redraw = true;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
vo_event(ctx->vo, VO_EVENT_WIN_STATE);
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
return true;
fail:
destroy_dispmanx(ctx);
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
return false;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
static void rpi_swap_buffers(struct ra_ctx *ctx)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
{
struct priv *p = ctx->priv;
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
eglSwapBuffers(p->egl_display, p->egl_surface);
}
static bool rpi_init(struct ra_ctx *ctx)
{
struct priv *p = ctx->priv = talloc_zero(ctx, struct priv);
bcm_host_init();
vc_tv_register_callback(tv_callback, ctx);
p->egl_display = eglGetDisplay(EGL_DEFAULT_DISPLAY);
if (!eglInitialize(p->egl_display, NULL, NULL)) {
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_FATAL(ctx, "EGL failed to initialize.\n");
goto fail;
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
if (!mpegl_create_context(ctx, p->egl_display, &p->egl_context, &p->egl_config))
goto fail;
2019-07-14 13:56:10 +00:00
if (!recreate_dispmanx(ctx))
goto fail;
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
mpegl_load_functions(&p->gl, ctx->log);
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
struct ra_gl_ctx_params params = {
.swap_buffers = rpi_swap_buffers,
};
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
if (!ra_gl_ctx_init(ctx, &p->gl, params))
goto fail;
client API: add a new way to pass X11 Display etc. to render API Hardware decoding things often need access to additional handles from the windowing system, such as the X11 or Wayland display when using vaapi. The opengl-cb had nothing dedicated for this, and used the weird GL_MP_MPGetNativeDisplay GL extension (which was mpv specific and not officially registered with OpenGL). This was awkward, and a pain due to having to emulate GL context behavior (like needing a TLS variable to store context for the pseudo GL extension function). In addition (and not inherently due to this), we could pass only one resource from mpv builtin context backends to hwdecs. It was also all GL specific. Replace this with a newer mechanism. It works for all RA backends, not just GL. the API user can explicitly pass the objects at init time via mpv_render_context_create(). Multiple resources are naturally possible. The API uses MPV_RENDER_PARAM_* defines, but internally we use strings. This is done for 2 reasons: 1. trying to leave libmpv and internal mechanisms decoupled, 2. not having to add public API for some of the internal resource types (especially D3D/GL interop stuff). To remain sane, drop support for obscure half-working opengl-cb things, like the DRM interop (was missing necessary things), the RPI window thing (nobody used it), and obscure D3D interop things (not needed with ANGLE, others were undocumented). In order not to break ABI and the C API, we don't remove the associated structs from opengl_cb.h. The parts which are still needed (in particular DRM interop) needs to be ported to the render API.
2018-03-22 16:05:01 +00:00
ra_add_native_resource(ctx->ra, "MPV_RPI_WINDOW", p->win_params);
ra_gl_ctx_resize(ctx->swapchain, ctx->vo->dwidth, ctx->vo->dheight, 0);
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
return true;
fail:
rpi_uninit(ctx);
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
return false;
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
static bool rpi_reconfig(struct ra_ctx *ctx)
{
return recreate_dispmanx(ctx);
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
static struct mp_image *take_screenshot(struct ra_ctx *ctx)
{
struct priv *p = ctx->priv;
if (!p->display)
return NULL;
struct mp_image *img = mp_image_alloc(IMGFMT_BGR0, p->w, p->h);
if (!img)
return NULL;
DISPMANX_RESOURCE_HANDLE_T resource =
vc_dispmanx_resource_create(VC_IMAGE_ARGB8888,
img->w | ((img->w * 4) << 16), img->h,
&(int32_t){0});
if (!resource)
goto fail;
if (vc_dispmanx_snapshot(p->display, resource, 0))
goto fail;
VC_RECT_T rc = {.width = img->w, .height = img->h};
if (vc_dispmanx_resource_read_data(resource, &rc, img->planes[0], img->stride[0]))
goto fail;
vc_dispmanx_resource_delete(resource);
return img;
fail:
vc_dispmanx_resource_delete(resource);
talloc_free(img);
return NULL;
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
static int rpi_control(struct ra_ctx *ctx, int *events, int request, void *arg)
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
{
struct priv *p = ctx->priv;
switch (request) {
case VOCTRL_SCREENSHOT_WIN:
*(struct mp_image **)arg = take_screenshot(ctx);
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
return VO_TRUE;
case VOCTRL_CHECK_EVENTS:
if (atomic_fetch_and(&p->reload_display, 0)) {
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
MP_WARN(ctx, "Recovering from display mode switch...\n");
recreate_dispmanx(ctx);
}
return VO_TRUE;
case VOCTRL_GET_DISPLAY_FPS:
*(double *)arg = p->display_fps;
return VO_TRUE;
}
RPI support This requires FFmpeg git master for accelerated hardware decoding. Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav will also work. Most things work. Screenshots don't work with accelerated/opaque decoding (except using full window screenshot mode). Subtitles are very slow - even simple but huge overlays can cause frame drops. This always uses fullscreen mode. It uses dispmanx and mmal directly, and there are no window managers or anything on this level. vo_opengl also kind of works, but is pretty useless and slow. It can't use opaque hardware decoding (copy back can be used by forcing the option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend is preferred over the X11 ones in case you're trying on X11; but X11 is even more useless on RPI. This doesn't correctly reject extended h264 profiles and thus doesn't fallback to software decoding. The hw supports only up to the high profile, and will e.g. return garbage for Hi10P video. This sets a precedent of enabling hw decoding by default, but only if RPI support is compiled (which most hopefully it will be disabled on desktop Linux platforms). While it's more or less required to use hw decoding on the weak RPI, it causes more problems than it solves on real platforms (Linux has the Intel GPU problem, OSX still has some cases with broken decoding.) So I can live with this compromise of having different defaults depending on the platform. Raspberry Pi 2 is required. This wasn't tested on the original RPI, though at least decoding itself seems to work (but full playback was not tested).
2015-03-29 13:12:11 +00:00
return VO_NOTIMPL;
}
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
const struct ra_ctx_fns ra_ctx_rpi = {
.type = "opengl",
.name = "rpi",
.reconfig = rpi_reconfig,
.control = rpi_control,
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
.init = rpi_init,
.uninit = rpi_uninit,
vo_opengl: refactor into vo_gpu This is done in several steps: 1. refactor MPGLContext -> struct ra_ctx 2. move GL-specific stuff in vo_opengl into opengl/context.c 3. generalize context creation to support other APIs, and add --gpu-api 4. rename all of the --opengl- options that are no longer opengl-specific 5. move all of the stuff from opengl/* that isn't GL-specific into gpu/ (note: opengl/gl_utils.h became opengl/utils.h) 6. rename vo_opengl to vo_gpu 7. to handle window screenshots, the short-term approach was to just add it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to ra itself (and vo_gpu altered to compensate), but this was a stop-gap measure to prevent this commit from getting too big 8. move ra->fns->flush to ra_gl_ctx instead 9. some other minor changes that I've probably already forgotten Note: This is one half of a major refactor, the other half of which is provided by rossy's following commit. This commit enables support for all linux platforms, while his version enables support for all non-linux platforms. Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the --opengl- options like --opengl-early-flush, --opengl-finish etc. Should be a strict superset of the old functionality. Disclaimer: Since I have no way of compiling mpv on all platforms, some of these ports were done blindly. Specifically, the blind ports included context_mali_fbdev.c and context_rpi.c. Since they're both based on egl_helpers, the port should have gone smoothly without any major changes required. But if somebody complains about a compile error on those platforms (assuming anybody actually uses them), you know where to complain.
2017-09-14 06:04:55 +00:00
};