RepoMirrors
/
mpv
mirror of https://github.com/mpv-player/mpv
1
0
Fork 0
Code Issues Releases Wiki Activity
mpv/player/osd.c

563 lines
17 KiB
C
Raw Permalink Normal View History

Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
/*
* This file is part of MPlayer.
*
* MPlayer is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* MPlayer is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with MPlayer; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <stddef.h>
#include <stdbool.h>
#include <inttypes.h>
#include <math.h>
#include <limits.h>
#include <assert.h>
#include "config.h"
#include "talloc.h"
Split mpvcore/ into common/, misc/, bstr/
2013-12-17 01:39:45 +00:00
#include "common/msg.h"
msg: move special declarations to msg_control.h While almost everything uses msg.h, the moved definitions are rarely needed by anything.
2014-01-16 20:24:39 +00:00
#include "common/msg_control.h"
Move options/config related files from mpvcore/ to options/ Since m_option.h and options.h are extremely often included, a lot of files have to be changed. Moving path.c/h to options/ is a bit questionable, but since this is mainly about access to config files (which are also handled in options/), it's probably ok.
2013-12-17 01:02:25 +00:00
#include "options/options.h"
Split mpvcore/ into common/, misc/, bstr/
2013-12-17 01:39:45 +00:00
#include "common/common.h"
Move options/config related files from mpvcore/ to options/ Since m_option.h and options.h are extremely often included, a lot of files have to be changed. Moving path.c/h to options/ is a bit questionable, but since this is mainly about access to config files (which are also handled in options/), it's probably ok.
2013-12-17 01:02:25 +00:00
#include "options/m_property.h"
Split mpvcore/ into common/, misc/, bstr/
2013-12-17 01:39:45 +00:00
#include "common/encode.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
Rename getch2....c/h to terminal....c/h "getch2" really tells nothing about what the heck this code does. It'd be even worse when moving the rest of terminal handling code there.
2013-12-19 20:31:27 +00:00
#include "osdep/terminal.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
#include "osdep/timer.h"
Reduce stheader.h includes, move stream types to mp_common.h
2013-11-23 21:08:42 +00:00
#include "demux/demux.h"
player: better cache status on status line The cache percentage was useless. It showed how much of the total stream cache was in use, but since the cache size is something huge and unrelated to the bitrate or network speed, the information content of the percentage was rather low. Replace this with printing the duration of the demuxer-cached data, and the size of the stream cache in KB. I'm not completely sure about the formatting; suggestions are welcome. Note that it's not easy to know how much playback time the stream cache covers, so it's always in bytes.
2014-08-27 20:42:28 +00:00
#include "stream/stream.h"
Rename sub.c/.h to osd.c/.h This was way too misleading. osd.c merely calls the subtitle renderers, instead of actually dealing with subtitles.
2013-11-24 11:58:06 +00:00
#include "sub/osd.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
video: add VO framedropping mode This mostly uses the same idea as with vo_vdpau.c, but much simplified. On X11, it tries to get the display framerate with XF86VM, and limits the frequency of new video frames against it. Note that this is an old extension, and is confirmed not to work correctly with multi-monitor setups. But we're using it because it was already around (it is also used by vo_vdpau). This attempts to predict the next vsync event by using the time of the last frame and the display FPS. Even if that goes completely wrong, the results are still relatively good. On other systems, or if the X11 code doesn't return a display FPS, a framerate of 1000 is assumed. This is infinite for all practical purposes, and means that only frames which are definitely too late are dropped. This probably has worse results, but is still useful. "--framedrop=yes" is basically replaced with "--framedrop=decoder". The old framedropping mode is kept around, and should perhaps be improved. Dropping on the decoder level is still useful if decoding itself is too slow.
2014-08-15 21:33:33 +00:00
#include "video/out/vo.h"
Rename mp_core.h to core.h Get rid of the mp_ prefix.
2013-12-17 00:08:53 +00:00
#include "core.h"
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
#include "command.h"
#define saddf(var, ...) (*(var) = talloc_asprintf_append((*var), __VA_ARGS__))
// append time in the hh:mm:ss format (plus fractions if wanted)
static void sadd_hhmmssff(char **buf, double time, bool fractions)
{
char *s = mp_format_time(time, fractions);
*buf = talloc_strdup_append(*buf, s);
talloc_free(s);
}
static void sadd_percentage(char **buf, int percent) {
if (percent >= 0)
*buf = talloc_asprintf_append(*buf, " (%d%%)", percent);
}
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
static char *join_lines(void *ta_ctx, char **parts, int num_parts)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
char *res = talloc_strdup(ta_ctx, "");
for (int n = 0; n < num_parts; n++)
res = talloc_asprintf_append(res, "%s%s", n ? "\n" : "", parts[n]);
return res;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
static void term_osd_update(struct MPContext *mpctx)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
int num_parts = 0;
player: don't use OSD message stack for term OSD subs Showing subtitles on terminal used the OSD message stack (which uses a stack to "pile up" messages that were displayed at the same time). This had a bunch of weird and annoying consequences. This accessed a certain osd_state field, which is a minor annoyance since I want to make that struct opaque. Implement this differently.
2014-01-17 20:55:23 +00:00
char *parts[3] = {0};
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
options: add --no-terminal switch Mostly useful for internal reasons. This code will be enabled by default if mpv is started via the client API.
2014-02-06 15:49:50 +00:00
if (!mpctx->opts->use_terminal)
return;
player: don't use OSD message stack for term OSD subs Showing subtitles on terminal used the OSD message stack (which uses a stack to "pile up" messages that were displayed at the same time). This had a bunch of weird and annoying consequences. This accessed a certain osd_state field, which is a minor annoyance since I want to make that struct opaque. Implement this differently.
2014-01-17 20:55:23 +00:00
if (mpctx->term_osd_subs && mpctx->term_osd_subs[0])
parts[num_parts++] = mpctx->term_osd_subs;
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
if (mpctx->term_osd_text && mpctx->term_osd_text[0])
parts[num_parts++] = mpctx->term_osd_text;
if (mpctx->term_osd_status && mpctx->term_osd_status[0])
parts[num_parts++] = mpctx->term_osd_status;
char *s = join_lines(mpctx, parts, num_parts);
if (strcmp(mpctx->term_osd_contents, s) == 0 &&
mp_msg_has_status_line(mpctx->global))
{
talloc_free(s);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
} else {
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
talloc_free(mpctx->term_osd_contents);
mpctx->term_osd_contents = s;
mp_msg(mpctx->statusline, MSGL_STATUS, "%s", s);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
player: don't use OSD message stack for term OSD subs Showing subtitles on terminal used the OSD message stack (which uses a stack to "pile up" messages that were displayed at the same time). This had a bunch of weird and annoying consequences. This accessed a certain osd_state field, which is a minor annoyance since I want to make that struct opaque. Implement this differently.
2014-01-17 20:55:23 +00:00
static void term_osd_set_subs(struct MPContext *mpctx, const char *text)
{
if (mpctx->video_out || !text)
text = ""; // disable
if (strcmp(mpctx->term_osd_subs ? mpctx->term_osd_subs : "", text) == 0)
return;
talloc_free(mpctx->term_osd_subs);
mpctx->term_osd_subs = talloc_strdup(mpctx, text);
term_osd_update(mpctx);
}
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
static void term_osd_set_text(struct MPContext *mpctx, const char *text)
{
osd: fix --term-osd=no It didn't actually disable it. I'm actually not sure what this option is useful for, but fixing it can't harm.
2014-09-21 22:29:45 +00:00
if ((mpctx->video_out && mpctx->opts->term_osd != 1) || !mpctx->opts->term_osd)
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
text = ""; // disable
talloc_free(mpctx->term_osd_text);
mpctx->term_osd_text = talloc_strdup(mpctx, text);
term_osd_update(mpctx);
}
static void term_osd_set_status(struct MPContext *mpctx, const char *text)
{
talloc_free(mpctx->term_osd_status);
mpctx->term_osd_status = talloc_strdup(mpctx, text);
term_osd_update(mpctx);
}
player: add --term-osd-bar, which shows a status bar on the terminal Feature request from github issue #451. Disabled by default, will probably stay this way.
2014-01-15 15:14:37 +00:00
static void add_term_osd_bar(struct MPContext *mpctx, char **line, int width)
{
struct MPOpts *opts = mpctx->opts;
if (width < 5)
return;
player: handle the corner cases in --term-osd-bar correctly With the old code and pos == width - 2 one character too many is drawn.
2014-01-15 21:37:53 +00:00
int pos = get_current_pos_ratio(mpctx, false) * (width - 3);
pos = MPCLAMP(pos, 0, width - 3);
player: add --term-osd-bar, which shows a status bar on the terminal Feature request from github issue #451. Disabled by default, will probably stay this way.
2014-01-15 15:14:37 +00:00
bstr chars = bstr0(opts->term_osd_bar_chars);
bstr parts[5];
for (int n = 0; n < 5; n++)
parts[n] = bstr_split_utf8(chars, &chars);
player: hack to fix --msgmodule --term-osd-bar Basically a cheap hack to fix that the --msgmodule prefix will cause an unwanted linebreak by making the line too long. Suggested by Hamuko in github issue #710. Fixes #710.
2014-04-13 11:03:31 +00:00
saddf(line, "\r%.*s", BSTR_P(parts[0]));
player: add --term-osd-bar, which shows a status bar on the terminal Feature request from github issue #451. Disabled by default, will probably stay this way.
2014-01-15 15:14:37 +00:00
for (int n = 0; n < pos; n++)
saddf(line, "%.*s", BSTR_P(parts[1]));
saddf(line, "%.*s", BSTR_P(parts[2]));
player: handle the corner cases in --term-osd-bar correctly With the old code and pos == width - 2 one character too many is drawn.
2014-01-15 21:37:53 +00:00
for (int n = 0; n < width - 3 - pos; n++)
player: add --term-osd-bar, which shows a status bar on the terminal Feature request from github issue #451. Disabled by default, will probably stay this way.
2014-01-15 15:14:37 +00:00
saddf(line, "%.*s", BSTR_P(parts[3]));
saddf(line, "%.*s", BSTR_P(parts[4]));
}
player: show busy symbol on OSD if seeking takes too long Same as it's done on the terminal.
2014-10-22 14:11:44 +00:00
static bool is_busy(struct MPContext *mpctx)
{
return !mpctx->restart_complete && mp_time_sec() - mpctx->start_timestamp > 0.3;
}
player: remove unneeded call print_status() is called at a later point anyway (and before sleeping), so this code has little effect. This code was added in commit a4f7a3df5, and I can't observe any problems with idle mode anymore. Now print_status() is called from a single place only, within osd.c.
2014-08-17 23:21:21 +00:00
static void print_status(struct MPContext *mpctx)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
struct MPOpts *opts = mpctx->opts;
player: set PulseAudio stream title to window title Set the PulseAudio stream title, just like the VO window title is set. Refactor update_vo_window_title() so that we can use it for AOs too. The ao_pulse.c bit is stolen from MPlayer.
2013-11-09 23:49:13 +00:00
update_window_title(mpctx, false);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
options: add --no-terminal switch Mostly useful for internal reasons. This code will be enabled by default if mpv is started via the client API.
2014-02-06 15:49:50 +00:00
if (!opts->use_terminal)
return;
player: remove central uninit_player() function and flags mess Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The main use of this was that you could pass a bitmask of these flags to uninit_player(). Except in some situations where you wanted to uninitialize nearly everything, this wasn't really useful. Moreover, it was quite annoying that subsystems had most of the code in a specific file, but the uninit code in loadfile.c (because that's where uninit_player() was implemented). Simplify all this. Remove the flags; e.g. instead of testing for the INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code to separate functions, e.g. uninit_audio_out().
2014-10-03 17:57:49 +00:00
if (opts->quiet || !mpctx->playback_initialized || !mpctx->playing_msg_shown)
player: never print status messages before playback begins After a new file is loaded, playback never starts instantly. Rather, it takes some playloop iterations until initial audio and video have been decoded, and the outputs have been (lazily) initialized. This means you will get status line updates between the messages that inform of the initialized outputs. This is a bit annoying and clutters the terminal output needlessly. Fix this by never printing the status line before playback isn't fully initialized. Do this by reusing the --term-playing-msg code (which prints a message once playback is initialized). This also makes sure the status line _is_ shown during playback restart when doing seeks. It's possible that the change will make the output more confusing if for some reason is stuck forever initializing playback, but that seems like an obscure corner case that never happens, so forget about it.
2014-08-17 23:25:59 +00:00
{
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
term_osd_set_status(mpctx, "");
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
return;
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (opts->status_msg) {
options: handle escape sequences in e.g. --playing-msg differently M_OPT_PARSE_ESCAPES was pretty stupid, and broke the (useful) assumption that string variables contain exactly the same value as set by the option. Simplify it, and move escape handling to the place where it's used. Escape handling itself is not terribly useful, but still allows useful things like multiline custom OSD with "\n".
2014-02-20 13:46:23 +00:00
char *r = mp_property_expand_escaped_string(mpctx, opts->status_msg);
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
term_osd_set_status(mpctx, r);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
talloc_free(r);
return;
}
char *line = NULL;
// Playback status
player: show busy symbol on OSD if seeking takes too long Same as it's done on the terminal.
2014-10-22 14:11:44 +00:00
if (is_busy(mpctx)) {
player: indicate on the status line whether a seek is active This is delayed by 300ms - before that, the status doesn't change. I feel like it would too annoying if the status line would "flicker" on normal seek by quickly showing and hiding the indicator.
2014-08-07 22:05:24 +00:00
saddf(&line, "(...) ");
} else if (mpctx->paused_for_cache && !opts->pause) {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
saddf(&line, "(Buffering) ");
} else if (mpctx->paused) {
saddf(&line, "(Paused) ");
}
audio: move decoder context from sh_audio into new struct Move all state that basically changes during decoding or is needed in order to manage decoding itself into a new struct (dec_audio). sh_audio (defined in stheader.h) is supposed to be the audio stream header. This should reflect the file headers for the stream. Putting the decoder context there is strange design, to say the least.
2013-11-23 20:22:17 +00:00
if (mpctx->d_audio)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
saddf(&line, "A");
video: move decoder context from sh_video into new struct This is similar to the sh_audio commit. This is mostly cosmetic in nature, except that it also adds automatical freeing of the decoder driver's state struct (which was in sh_video->context, now in dec_video->priv). Also remove all the stheader.h fields that are not needed anymore.
2013-11-23 20:36:20 +00:00
if (mpctx->d_video)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
saddf(&line, "V");
saddf(&line, ": ");
// Playback position
player: make the time display relative to start PTS This commit makes the playback start time always at time 0. Signed-off-by: wm4 <wm4@nowhere>
2014-06-29 17:27:46 +00:00
sadd_hhmmssff(&line, get_playback_time(mpctx), mpctx->opts->osd_fractions);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double len = get_time_length(mpctx);
if (len >= 0) {
saddf(&line, " / ");
sadd_hhmmssff(&line, len, mpctx->opts->osd_fractions);
}
sadd_percentage(&line, get_percent_pos(mpctx));
// other
if (opts->playback_speed != 1)
saddf(&line, " x%4.2f", opts->playback_speed);
// A-V sync
video: move decoder context from sh_video into new struct This is similar to the sh_audio commit. This is mostly cosmetic in nature, except that it also adds automatical freeing of the decoder driver's state struct (which was in sh_video->context, now in dec_video->priv). Also remove all the stheader.h fields that are not needed anymore.
2013-11-23 20:36:20 +00:00
if (mpctx->d_audio && mpctx->d_video && mpctx->sync_audio_to_video) {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
if (mpctx->last_av_difference != MP_NOPTS_VALUE)
saddf(&line, " A-V:%7.3f", mpctx->last_av_difference);
else
saddf(&line, " A-V: ???");
if (fabs(mpctx->total_avsync_change) > 0.05)
saddf(&line, " ct:%7.3f", mpctx->total_avsync_change);
}
configure: uniform the defines to #define HAVE_xxx (0|1) The configure followed 5 different convetions of defines because the next guy always wanted to introduce a new better way to uniform it[1]. For an hypothetic feature 'hurr' you could have had: * #define HAVE_HURR 1 / #undef HAVE_DURR * #define HAVE_HURR / #undef HAVE_DURR * #define CONFIG_HURR 1 / #undef CONFIG_DURR * #define HAVE_HURR 1 / #define HAVE_DURR 0 * #define CONFIG_HURR 1 / #define CONFIG_DURR 0 All is now uniform and uses: * #define HAVE_HURR 1 * #define HAVE_DURR 0 We like definining to 0 as opposed to `undef` bcause it can help spot typos and is very helpful when doing big reorganizations in the code. [1]: http://xkcd.com/927/ related
2013-07-16 11:28:28 +00:00
#if HAVE_ENCODING
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
double position = get_current_pos_ratio(mpctx, true);
char lavcbuf[80];
if (encode_lavc_getstatus(mpctx->encode_lavc_ctx, lavcbuf, sizeof(lavcbuf),
position) >= 0)
{
// encoding stats
saddf(&line, " %s", lavcbuf);
} else
#endif
{
// VO stats
video: add VO framedropping mode This mostly uses the same idea as with vo_vdpau.c, but much simplified. On X11, it tries to get the display framerate with XF86VM, and limits the frequency of new video frames against it. Note that this is an old extension, and is confirmed not to work correctly with multi-monitor setups. But we're using it because it was already around (it is also used by vo_vdpau). This attempts to predict the next vsync event by using the time of the last frame and the display FPS. Even if that goes completely wrong, the results are still relatively good. On other systems, or if the X11 code doesn't return a display FPS, a framerate of 1000 is assumed. This is infinite for all practical purposes, and means that only frames which are definitely too late are dropped. This probably has worse results, but is still useful. "--framedrop=yes" is basically replaced with "--framedrop=decoder". The old framedropping mode is kept around, and should perhaps be improved. Dropping on the decoder level is still useful if decoding itself is too slow.
2014-08-15 21:33:33 +00:00
if (mpctx->d_video) {
int64_t c = vo_get_drop_count(mpctx->video_out);
player: update meaning of drop_frame_cnt Rename the variable, update comments, and update the documentation of the property which returns its value.
2014-11-01 00:07:21 +00:00
if (c > 0 || mpctx->dropped_frames_total > 0) {
player: change framedrop display in the status line Hopefully less confusing, and hopefully doesn't exceed the terminal width in any situation.
2014-10-31 00:01:58 +00:00
saddf(&line, " Dropped: %"PRId64, c);
player: update meaning of drop_frame_cnt Rename the variable, update comments, and update the documentation of the property which returns its value.
2014-11-01 00:07:21 +00:00
if (mpctx->dropped_frames_total)
saddf(&line, "/%d", mpctx->dropped_frames_total);
player: change framedrop display in the status line Hopefully less confusing, and hopefully doesn't exceed the terminal width in any situation.
2014-10-31 00:01:58 +00:00
}
video: add VO framedropping mode This mostly uses the same idea as with vo_vdpau.c, but much simplified. On X11, it tries to get the display framerate with XF86VM, and limits the frequency of new video frames against it. Note that this is an old extension, and is confirmed not to work correctly with multi-monitor setups. But we're using it because it was already around (it is also used by vo_vdpau). This attempts to predict the next vsync event by using the time of the last frame and the display FPS. Even if that goes completely wrong, the results are still relatively good. On other systems, or if the X11 code doesn't return a display FPS, a framerate of 1000 is assumed. This is infinite for all practical purposes, and means that only frames which are definitely too late are dropped. This probably has worse results, but is still useful. "--framedrop=yes" is basically replaced with "--framedrop=decoder". The old framedropping mode is kept around, and should perhaps be improved. Dropping on the decoder level is still useful if decoding itself is too slow.
2014-08-15 21:33:33 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: better cache status on status line The cache percentage was useless. It showed how much of the total stream cache was in use, but since the cache size is something huge and unrelated to the bitrate or network speed, the information content of the percentage was rather low. Replace this with printing the duration of the demuxer-cached data, and the size of the stream cache in KB. I'm not completely sure about the formatting; suggestions are welcome. Note that it's not easy to know how much playback time the stream cache covers, so it's always in bytes.
2014-08-27 20:42:28 +00:00
if (mpctx->demuxer) {
int64_t fill = -1;
demux_stream_control(mpctx->demuxer, STREAM_CTRL_GET_CACHE_FILL, &fill);
if (fill >= 0) {
saddf(&line, " Cache: ");
struct demux_ctrl_reader_state s = {.ts_duration = -1};
demux_control(mpctx->demuxer, DEMUXER_CTRL_GET_READER_STATE, &s);
if (s.ts_duration < 0) {
saddf(&line, "???");
} else {
saddf(&line, "%2ds", (int)s.ts_duration);
}
saddf(&line, "+%lldKB", (long long)(fill / 1024));
}
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: add --term-osd-bar, which shows a status bar on the terminal Feature request from github issue #451. Disabled by default, will probably stay this way.
2014-01-15 15:14:37 +00:00
if (opts->term_osd_bar) {
saddf(&line, "\n");
terminal: some cleanups In particular, remove all the stupid debug printfs from the win code.
2014-08-21 20:13:10 +00:00
int w = 80, h = 24;
terminal_get_size(&w, &h);
add_term_osd_bar(mpctx, &line, w);
player: add --term-osd-bar, which shows a status bar on the terminal Feature request from github issue #451. Disabled by default, will probably stay this way.
2014-01-15 15:14:37 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
// end
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
term_osd_set_status(mpctx, line);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
talloc_free(line);
}
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
static bool set_osd_msg_va(struct MPContext *mpctx, int level, int time,
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
const char *fmt, va_list ap)
{
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
if (level > mpctx->opts->osd_level)
return false;
talloc_free(mpctx->osd_msg_text);
mpctx->osd_msg_text = talloc_vasprintf(mpctx, fmt, ap);
mpctx->osd_show_pos = false;
osd: don't let slow commands cut OSD messages short Done for screenshot commands, requested by a user.
2014-10-06 20:19:24 +00:00
mpctx->osd_msg_next_duration = time / 1000.0;
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
mpctx->osd_force_update = true;
mpctx->sleeptime = 0;
player: fix OSD cycling OSD cycling attempted to remove the current message by setting an empty message with duration 0. Duration 0 tripped up a corner case causing no OSD to be displayed (until the next message was set), so exclude this explicitly.
2014-10-14 17:20:36 +00:00
if (mpctx->osd_msg_next_duration <= 0)
mpctx->osd_msg_visible = mp_time_sec();
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
return true;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
bool set_osd_msg(struct MPContext *mpctx, int level, int time,
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
const char *fmt, ...)
{
va_list ap;
va_start(ap, fmt);
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
bool r = set_osd_msg_va(mpctx, level, time, fmt, ap);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
va_end(ap);
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
return r;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
// type: mp_osd_font_codepoints, ASCII, or OSD_BAR_*
command: simplify OSD property display code Probably not many user-visible changes. One notable change is that the terminal OSD code for OSD bar fallback handling is removed with no replacement. Instead, terminal OSD gets the same text message as normal OSD. For volume, this is ok, because the text message is reasonable. Other properties will look worse, but could be adjusted, and there are in fact no other such properties that would be useful in audio-only mode. The fallback message for seeking falls away as well, but that message was useless anyway - the terminal status line provides all information anyway. I believe the show_property_osd() code is now much easier to follow.
2014-09-21 21:40:45 +00:00
void set_osd_bar(struct MPContext *mpctx, int type,
player: show "neutral" position markers for OSD bars This commit implements them for volume and some video properties.
2014-06-08 21:52:58 +00:00
double min, double max, double neutral, double val)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
struct MPOpts *opts = mpctx->opts;
player: do not wrongly clear OSD bar stops, reindent set_osd_bar_chapters() always cleared the OSD bar stops, even if the current bar was not the seek bar. Obviously it should leave the state of the bar alone in this case. Also change the function control flow so that we can drop one indentation level, and do the equivalent change for the other OSD bar functions.
2014-09-25 19:23:33 +00:00
if (opts->osd_level < 1 || !opts->osd_bar_visible || !mpctx->video_out)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
return;
player: do not wrongly clear OSD bar stops, reindent set_osd_bar_chapters() always cleared the OSD bar stops, even if the current bar was not the seek bar. Obviously it should leave the state of the bar alone in this case. Also change the function control flow so that we can drop one indentation level, and do the equivalent change for the other OSD bar functions.
2014-09-25 19:23:33 +00:00
mpctx->osd_visible = mp_time_sec() + opts->osd_duration / 1000.0;
mpctx->sleeptime = 0;
mpctx->osd_progbar.type = type;
mpctx->osd_progbar.value = (val - min) / (max - min);
mpctx->osd_progbar.num_stops = 0;
if (neutral > min && neutral < max) {
float pos = (neutral - min) / (max - min);
MP_TARRAY_APPEND(mpctx, mpctx->osd_progbar.stops,
mpctx->osd_progbar.num_stops, pos);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: do not wrongly clear OSD bar stops, reindent set_osd_bar_chapters() always cleared the OSD bar stops, even if the current bar was not the seek bar. Obviously it should leave the state of the bar alone in this case. Also change the function control flow so that we can drop one indentation level, and do the equivalent change for the other OSD bar functions.
2014-09-25 19:23:33 +00:00
osd_set_progbar(mpctx->osd, &mpctx->osd_progbar);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
// Update a currently displayed bar of the same type, without resetting the
// timer.
static void update_osd_bar(struct MPContext *mpctx, int type,
double min, double max, double val)
{
player: do not wrongly clear OSD bar stops, reindent set_osd_bar_chapters() always cleared the OSD bar stops, even if the current bar was not the seek bar. Obviously it should leave the state of the bar alone in this case. Also change the function control flow so that we can drop one indentation level, and do the equivalent change for the other OSD bar functions.
2014-09-25 19:23:33 +00:00
if (mpctx->osd_progbar.type != type)
return;
float new_value = (val - min) / (max - min);
if (new_value != mpctx->osd_progbar.value) {
mpctx->osd_progbar.value = new_value;
osd_set_progbar(mpctx->osd, &mpctx->osd_progbar);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
command: improve A-B loop behavior If the B point is set, then loop back to A. Also, update the OSD bar if necessary.
2014-11-18 19:28:54 +00:00
void set_osd_bar_chapters(struct MPContext *mpctx, int type)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
command: implement A-B loops Probably needs to be polished a bit more. Also, might require a key binding that can set/clear the loop points in a more intuitive way. For now, something like this can be put into input.conf to use it: ctrl+y set ab-loop-a ${time-pos} # set A ctrl+x set ab-loop-b ${time-pos} # set B ctrl+c set ab-loop-a no # clear (mostly) Fixes #1241.
2014-11-17 23:09:42 +00:00
struct MPOpts *opts = mpctx->opts;
player: do not wrongly clear OSD bar stops, reindent set_osd_bar_chapters() always cleared the OSD bar stops, even if the current bar was not the seek bar. Obviously it should leave the state of the bar alone in this case. Also change the function control flow so that we can drop one indentation level, and do the equivalent change for the other OSD bar functions.
2014-09-25 19:23:33 +00:00
if (mpctx->osd_progbar.type != type)
return;
sub: uglify OSD code path with locking Do two things: 1. add locking to struct osd_state 2. make struct osd_state opaque While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses lots of osd_state (and osd_object) members. To make sure everything is accessed synchronously, I prefer making osd_state opaque, even if it means adding pretty dumb accessors. All of this is meant to allow running VO in their own threads. Eventually, VOs will request OSD on their own, which means osd_state will be accessed from foreign threads.
2014-01-18 00:19:20 +00:00
mpctx->osd_progbar.num_stops = 0;
player: do not wrongly clear OSD bar stops, reindent set_osd_bar_chapters() always cleared the OSD bar stops, even if the current bar was not the seek bar. Obviously it should leave the state of the bar alone in this case. Also change the function control flow so that we can drop one indentation level, and do the equivalent change for the other OSD bar functions.
2014-09-25 19:23:33 +00:00
double len = get_time_length(mpctx);
if (len > 0) {
command: implement A-B loops Probably needs to be polished a bit more. Also, might require a key binding that can set/clear the loop points in a more intuitive way. For now, something like this can be put into input.conf to use it: ctrl+y set ab-loop-a ${time-pos} # set A ctrl+x set ab-loop-b ${time-pos} # set B ctrl+c set ab-loop-a no # clear (mostly) Fixes #1241.
2014-11-17 23:09:42 +00:00
if (opts->ab_loop[0] != MP_NOPTS_VALUE &&
opts->ab_loop[1] != MP_NOPTS_VALUE)
{
MP_TARRAY_APPEND(mpctx, mpctx->osd_progbar.stops,
mpctx->osd_progbar.num_stops, opts->ab_loop[0] / len);
MP_TARRAY_APPEND(mpctx, mpctx->osd_progbar.stops,
mpctx->osd_progbar.num_stops, opts->ab_loop[1] / len);
} else {
int num = get_chapter_count(mpctx);
for (int n = 0; n < num; n++) {
double time = chapter_start_time(mpctx, n);
if (time >= 0) {
float pos = time / len;
MP_TARRAY_APPEND(mpctx, mpctx->osd_progbar.stops,
mpctx->osd_progbar.num_stops, pos);
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
}
sub: uglify OSD code path with locking Do two things: 1. add locking to struct osd_state 2. make struct osd_state opaque While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses lots of osd_state (and osd_object) members. To make sure everything is accessed synchronously, I prefer making osd_state opaque, even if it means adding pretty dumb accessors. All of this is meant to allow running VO in their own threads. Eventually, VOs will request OSD on their own, which means osd_state will be accessed from foreign threads.
2014-01-18 00:19:20 +00:00
osd_set_progbar(mpctx->osd, &mpctx->osd_progbar);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
player: merge mp_osd.h into mp_core.h Just doing this because mp_osd.h and osd.c is not consistent. There are some other header files (command.h and screenshot.h), but since I don't feel too good about inflating mp_core.h, I'm not merging them, at least not yet.
2013-10-30 20:47:14 +00:00
// osd_function is the symbol appearing in the video status, such as OSD_PLAY
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
void set_osd_function(struct MPContext *mpctx, int osd_function)
{
struct MPOpts *opts = mpctx->opts;
mpctx->osd_function = osd_function;
mpctx->osd_function_visible = mp_time_sec() + opts->osd_duration / 1000.0;
osd: properly wakeup when the OSD function disappears Fixes #1236.
2014-11-01 16:32:34 +00:00
mpctx->osd_force_update = true;
mpctx->sleeptime = 0;
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
/**
* \brief Display text subtitles on the OSD
*/
void set_osd_subtitle(struct MPContext *mpctx, const char *text)
{
sub: uglify OSD code path with locking Do two things: 1. add locking to struct osd_state 2. make struct osd_state opaque While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses lots of osd_state (and osd_object) members. To make sure everything is accessed synchronously, I prefer making osd_state opaque, even if it means adding pretty dumb accessors. All of this is meant to allow running VO in their own threads. Eventually, VOs will request OSD on their own, which means osd_state will be accessed from foreign threads.
2014-01-18 00:19:20 +00:00
osd_set_text(mpctx->osd, OSDTYPE_SUB, text);
player: don't use OSD message stack for term OSD subs Showing subtitles on terminal used the OSD message stack (which uses a stack to "pile up" messages that were displayed at the same time). This had a bunch of weird and annoying consequences. This accessed a certain osd_state field, which is a minor annoyance since I want to make that struct opaque. Implement this differently.
2014-01-17 20:55:23 +00:00
term_osd_set_subs(mpctx, text);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
command: add osd-sym-cc property This allows you to reproduce the OSD symbol.
2014-09-17 22:12:59 +00:00
void get_current_osd_sym(struct MPContext *mpctx, char *buf, size_t buf_size)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
{
int sym = mpctx->osd_function;
if (!sym) {
player: show busy symbol on OSD if seeking takes too long Same as it's done on the terminal.
2014-10-22 14:11:44 +00:00
if (is_busy(mpctx) || (mpctx->paused_for_cache && !mpctx->opts->pause)) {
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
sym = OSD_CLOCK;
} else if (mpctx->paused || mpctx->step_frames) {
sym = OSD_PAUSE;
} else {
sym = OSD_PLAY;
}
}
command: add osd-sym-cc property This allows you to reproduce the OSD symbol.
2014-09-17 22:12:59 +00:00
osd_get_function_sym(buf, buf_size, sym);
}
player: allow overriding OSD message for all OSD levels Until now, you could override only level 3 with --osd-status-msg. Extend this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD level 0 always means disable OSD, so that isn't included. --osd-msg3 corresponds to --osd-status-msg, but they're not exactly the same. To allow more customization, --osd-msgN do not include the OSD symbol. The symbol can be manually added with "${osd-sym-cc}". We keep the "old" option for some short-term compatibility. --osd-msg1 should be particularly useful; for example you could do: --osd-msg1='${?pause==yes:${osd-sym-cc}}' to display a "paused" symbol when paused, and nothing during normal playback. (Although admittedly, the syntax is quite a bit of work.)
2014-09-17 23:19:27 +00:00
static void sadd_osd_status(char **buffer, struct MPContext *mpctx, int level)
command: add osd-sym-cc property This allows you to reproduce the OSD symbol.
2014-09-17 22:12:59 +00:00
{
player: allow overriding OSD message for all OSD levels Until now, you could override only level 3 with --osd-status-msg. Extend this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD level 0 always means disable OSD, so that isn't included. --osd-msg3 corresponds to --osd-status-msg, but they're not exactly the same. To allow more customization, --osd-msgN do not include the OSD symbol. The symbol can be manually added with "${osd-sym-cc}". We keep the "old" option for some short-term compatibility. --osd-msg1 should be particularly useful; for example you could do: --osd-msg1='${?pause==yes:${osd-sym-cc}}' to display a "paused" symbol when paused, and nothing during normal playback. (Although admittedly, the syntax is quite a bit of work.)
2014-09-17 23:19:27 +00:00
assert(level >= 0 && level <= 3);
if (level == 0)
return;
char *msg = mpctx->opts->osd_msg[level - 1];
if (msg && msg[0]) {
char *text = mp_property_expand_escaped_string(mpctx, msg);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
*buffer = talloc_strdup_append(*buffer, text);
talloc_free(text);
player: allow overriding OSD message for all OSD levels Until now, you could override only level 3 with --osd-status-msg. Extend this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD level 0 always means disable OSD, so that isn't included. --osd-msg3 corresponds to --osd-status-msg, but they're not exactly the same. To allow more customization, --osd-msgN do not include the OSD symbol. The symbol can be manually added with "${osd-sym-cc}". We keep the "old" option for some short-term compatibility. --osd-msg1 should be particularly useful; for example you could do: --osd-msg1='${?pause==yes:${osd-sym-cc}}' to display a "paused" symbol when paused, and nothing during normal playback. (Although admittedly, the syntax is quite a bit of work.)
2014-09-17 23:19:27 +00:00
} else if (level >= 2) {
bool fractions = mpctx->opts->osd_fractions;
char sym[10];
get_current_osd_sym(mpctx, sym, sizeof(sym));
saddf(buffer, "%s ", sym);
char *custom_msg = mpctx->opts->osd_status_msg;
if (custom_msg && level == 3) {
char *text = mp_property_expand_escaped_string(mpctx, custom_msg);
*buffer = talloc_strdup_append(*buffer, text);
talloc_free(text);
} else {
sadd_hhmmssff(buffer, get_playback_time(mpctx), fractions);
if (level == 3) {
player: don't display zero duration for files with unknown duration On OSD/terminal, just don't display the duration if unavailable. Make the "length" property unavailable if duration is unavailable.
2014-10-29 20:54:59 +00:00
double len = get_time_length(mpctx);
if (len >= 0) {
saddf(buffer, " / ");
sadd_hhmmssff(buffer, len, fractions);
}
player: allow overriding OSD message for all OSD levels Until now, you could override only level 3 with --osd-status-msg. Extend this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD level 0 always means disable OSD, so that isn't included. --osd-msg3 corresponds to --osd-status-msg, but they're not exactly the same. To allow more customization, --osd-msgN do not include the OSD symbol. The symbol can be manually added with "${osd-sym-cc}". We keep the "old" option for some short-term compatibility. --osd-msg1 should be particularly useful; for example you could do: --osd-msg1='${?pause==yes:${osd-sym-cc}}' to display a "paused" symbol when paused, and nothing during normal playback. (Although admittedly, the syntax is quite a bit of work.)
2014-09-17 23:19:27 +00:00
sadd_percentage(buffer, get_percent_pos(mpctx));
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
}
}
// OSD messages initated by seeking commands are added lazily with this
// function, because multiple successive seek commands can be coalesced.
static void add_seek_osd_messages(struct MPContext *mpctx)
{
if (mpctx->add_osd_seek_info & OSD_SEEK_INFO_BAR) {
double pos = get_current_pos_ratio(mpctx, false);
command: simplify OSD property display code Probably not many user-visible changes. One notable change is that the terminal OSD code for OSD bar fallback handling is removed with no replacement. Instead, terminal OSD gets the same text message as normal OSD. For volume, this is ok, because the text message is reasonable. Other properties will look worse, but could be adjusted, and there are in fact no other such properties that would be useful in audio-only mode. The fallback message for seeking falls away as well, but that message was useless anyway - the terminal status line provides all information anyway. I believe the show_property_osd() code is now much easier to follow.
2014-09-21 21:40:45 +00:00
set_osd_bar(mpctx, OSD_BAR_SEEK, 0, 1, 0, MPCLAMP(pos, 0, 1));
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
set_osd_bar_chapters(mpctx, OSD_BAR_SEEK);
}
if (mpctx->add_osd_seek_info & OSD_SEEK_INFO_TEXT) {
player: don't block terminal OSD while seeking Seeking usually show the status on OSD. In terminal OSD mode, no status is shown, because there is already a separate status line. Unfortunately, the mechanism for showing the status was still active, which forced showing no message while the code for showing seek status was active.
2014-01-13 18:46:16 +00:00
// Never in term-osd mode
if (mpctx->video_out && mpctx->opts->term_osd != 1) {
build: add -Wno-format-zero-length This warning makes absolutely no sense. Passing an empty string to printf-like functions is perfectly fine. In the OSD case, it just sets an empty message, practically clearing the OSD.
2014-09-26 11:52:55 +00:00
if (set_osd_msg(mpctx, 1, mpctx->opts->osd_duration, ""))
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
mpctx->osd_show_pos = true;
player: don't block terminal OSD while seeking Seeking usually show the status on OSD. In terminal OSD mode, no status is shown, because there is already a separate status line. Unfortunately, the mechanism for showing the status was still active, which forced showing no message while the code for showing seek status was active.
2014-01-13 18:46:16 +00:00
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}
if (mpctx->add_osd_seek_info & OSD_SEEK_INFO_CHAPTER_TEXT) {
char *chapter = chapter_display_name(mpctx, get_current_chapter(mpctx));
player: remove OSD message IDs These were needed before the last commit, but now they don't do anything anymore. (They were used to decide whether to replace or stack the previous OSD message when a new one was displayed.)
2014-01-17 21:34:47 +00:00
set_osd_msg(mpctx, 1, mpctx->opts->osd_duration,
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
"Chapter: %s", chapter);
talloc_free(chapter);
}
if ((mpctx->add_osd_seek_info & OSD_SEEK_INFO_EDITION)
&& mpctx->master_demuxer)
{
player: remove OSD message IDs These were needed before the last commit, but now they don't do anything anymore. (They were used to decide whether to replace or stack the previous OSD message when a new one was displayed.)
2014-01-17 21:34:47 +00:00
set_osd_msg(mpctx, 1, mpctx->opts->osd_duration,
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
"Playing edition %d of %d.",
mpctx->master_demuxer->edition + 1,
mpctx->master_demuxer->num_editions);
}
player: make the osd-msg prefix work for playlist_next/prev If input.conf e.g. contains "n osd-msg playlist_next", then pressing the n key will switch to the next file, and display the filename on OSD.
2014-11-11 21:07:16 +00:00
if (mpctx->add_osd_seek_info & OSD_SEEK_INFO_CURRENT_FILE) {
if (mpctx->filename) {
set_osd_msg(mpctx, 1, mpctx->opts->osd_duration, "%s",
mpctx->filename);
}
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
mpctx->add_osd_seek_info = 0;
}
player: rate-limit OSD text update There's no need to update OSD messages and the terminal status if nobody is going to see it. Since the player doesn't block on video display anymore, this update happens to often and probably burns slightly more CPU than necessary. (OSD redrawing is handled separately, so it's just mostly useless text processing and such.) Change it so that it's updated only on every video frame or all 50ms (whatever comes first). For VO OSD, we could in theory try to lock to the OSD redraw heuristic or the display refresh rate, but that's more complicated and doesn't work for the terminal status.
2014-09-25 18:25:24 +00:00
// Update the OSD text (both on VO and terminal status line).
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
void update_osd_msg(struct MPContext *mpctx)
{
struct MPOpts *opts = mpctx->opts;
struct osd_state *osd = mpctx->osd;
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
double now = mp_time_sec();
player: rate-limit OSD text update There's no need to update OSD messages and the terminal status if nobody is going to see it. Since the player doesn't block on video display anymore, this update happens to often and probably burns slightly more CPU than necessary. (OSD redrawing is handled separately, so it's just mostly useless text processing and such.) Change it so that it's updated only on every video frame or all 50ms (whatever comes first). For VO OSD, we could in theory try to lock to the OSD redraw heuristic or the display refresh rate, but that's more complicated and doesn't work for the terminal status.
2014-09-25 18:25:24 +00:00
if (!mpctx->osd_force_update) {
double delay = 0.050; // update the OSD at most this often
double diff = now - mpctx->osd_last_update;
if (diff < delay) {
mpctx->sleeptime = MPMIN(mpctx->sleeptime, delay - diff);
return;
}
}
mpctx->osd_force_update = false;
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
mpctx->osd_last_update = now;
if (mpctx->osd_visible) {
double sleep = mpctx->osd_visible - now;
if (sleep > 0) {
mpctx->sleeptime = MPMIN(mpctx->sleeptime, sleep);
} else {
mpctx->osd_visible = 0;
mpctx->osd_progbar.type = -1; // disable
osd_set_progbar(mpctx->osd, &mpctx->osd_progbar);
}
}
osd: properly wakeup when the OSD function disappears Fixes #1236.
2014-11-01 16:32:34 +00:00
if (mpctx->osd_function_visible) {
double sleep = mpctx->osd_function_visible - now;
if (sleep > 0) {
mpctx->sleeptime = MPMIN(mpctx->sleeptime, sleep);
} else {
mpctx->osd_function_visible = 0;
mpctx->osd_function = 0;
}
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
}
osd: don't let slow commands cut OSD messages short Done for screenshot commands, requested by a user.
2014-10-06 20:19:24 +00:00
if (mpctx->osd_msg_next_duration > 0) {
// This is done to avoid cutting the OSD message short if slow commands
// are executed between setting the OSD message and showing it.
mpctx->osd_msg_visible = now + mpctx->osd_msg_next_duration;
mpctx->osd_msg_next_duration = 0;
}
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
if (mpctx->osd_msg_visible) {
double sleep = mpctx->osd_msg_visible - now;
if (sleep > 0) {
mpctx->sleeptime = MPMIN(mpctx->sleeptime, sleep);
} else {
talloc_free(mpctx->osd_msg_text);
mpctx->osd_msg_text = NULL;
mpctx->osd_msg_visible = 0;
mpctx->osd_show_pos = false;
}
}
player: rate-limit OSD text update There's no need to update OSD messages and the terminal status if nobody is going to see it. Since the player doesn't block on video display anymore, this update happens to often and probably burns slightly more CPU than necessary. (OSD redrawing is handled separately, so it's just mostly useless text processing and such.) Change it so that it's updated only on every video frame or all 50ms (whatever comes first). For VO OSD, we could in theory try to lock to the OSD redraw heuristic or the display refresh rate, but that's more complicated and doesn't work for the terminal status.
2014-09-25 18:25:24 +00:00
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
add_seek_osd_messages(mpctx);
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
if (mpctx->osd_progbar.type == OSD_BAR_SEEK) {
double pos = get_current_pos_ratio(mpctx, false);
update_osd_bar(mpctx, OSD_BAR_SEEK, 0, 1, MPCLAMP(pos, 0, 1));
}
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
print_status(mpctx);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
// Look if we have a msg
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
if (mpctx->osd_msg_text && !mpctx->osd_show_pos) {
osd_set_text(osd, OSDTYPE_OSD, mpctx->osd_msg_text);
term_osd_set_text(mpctx, mpctx->osd_msg_text);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
return;
}
int osd_level = opts->osd_level;
player: simplify OSD message handling code Eliminate the remains of the OSD message stack. Another simplification comes from the fact that we do not need to care about time going backwards (we always use a monotonic time source, and wrapping time values are practically impossible). What this code was pretty trivial, and by now unnecessarily roundabout. Merge get_osd_msg() into update_osd_msg(), and add_osd_msg() into set_osd_msg_va().
2014-09-25 19:14:00 +00:00
if (mpctx->osd_msg_text && mpctx->osd_show_pos)
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
osd_level = 3;
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
// clear, or if OSD level demands it, show the status
char *text = NULL;
player: allow overriding OSD message for all OSD levels Until now, you could override only level 3 with --osd-status-msg. Extend this, add add --osd-msg1 to --osd-msg3 (one for each OSD level). OSD level 0 always means disable OSD, so that isn't included. --osd-msg3 corresponds to --osd-status-msg, but they're not exactly the same. To allow more customization, --osd-msgN do not include the OSD symbol. The symbol can be manually added with "${osd-sym-cc}". We keep the "old" option for some short-term compatibility. --osd-msg1 should be particularly useful; for example you could do: --osd-msg1='${?pause==yes:${osd-sym-cc}}' to display a "paused" symbol when paused, and nothing during normal playback. (Although admittedly, the syntax is quite a bit of work.)
2014-09-17 23:19:27 +00:00
sadd_osd_status(&text, mpctx, osd_level);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
sub: uglify OSD code path with locking Do two things: 1. add locking to struct osd_state 2. make struct osd_state opaque While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses lots of osd_state (and osd_object) members. To make sure everything is accessed synchronously, I prefer making osd_state opaque, even if it means adding pretty dumb accessors. All of this is meant to allow running VO in their own threads. Eventually, VOs will request OSD on their own, which means osd_state will be accessed from foreign threads.
2014-01-18 00:19:20 +00:00
osd_set_text(osd, OSDTYPE_OSD, text);
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
talloc_free(text);
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
player: redo terminal OSD and status line handling The terminal OSD code includes the handling of the terminal status line, showing player OSD messages on the terminal, and showing subtitles on terminal (the latter two only if there is no video window, or if terminal OSD is forced). This didn't handle some corner cases correctly. For example, showing an OSD message on the terminal always cleared the previous line, even if the line was an important message (or even just the command prompt, if most other messages were silenced). Attempt to handle this correctly by keeping track of how many lines the terminal OSD currently consists of. Since there could be race conditions with other messages being printed, implement this in msg.c. Now msg.c expects that MSGL_STATUS messages rewrite the status line, so the caller is forced to use a single mp_msg() call to set the status line. Instead of littering print_status() all over the place, update the status only once per playloop iteration in update_osd_msg(). In audio- only mode, the status line might now be a little bit off, but it's perhaps ok. Print the status line only if it has changed, or if another message was printed. This might help with extremely slow terminals, although in audio+video mode, it'll still be updated very often (A-V sync display changes on every frame). Instead of hardcoding the terminal sequences, use terminfo/termcap to get the sequences. Remove the --term-osd-esc option, which allowed to override the hardcoded escapes - it's useless now. The fallback for terminals with no escape sequences for moving the cursor and clearing a line is removed. This somewhat breaks status line display on these terminals, including the MS Windows console: instead of querying the terminal size and clearing the line manually by padding the output with spaces, the line is simply not cleared. I don't expect this to be a problem on UNIX, and on MS Windows we could emulate escape sequences. Note that terminal OSD (other than the status line) was broken anyway on these terminals. In osd.c, the function get_term_width() is not used anymore, so remove it. To remind us that the MS Windows console apparently adds a line break when writint the last column, adjust screen_width in terminal- win.c accordingly.
2014-01-13 19:05:41 +00:00
// always clear (term-osd has separate status line)
term_osd_set_text(mpctx, "");
Split mplayer.c mplayer.c was a bit too big. Split it into multiple files. I hope the way it's split makes sense. Maybe some things don't make too much sense, or go against intuition. These will fixed as soon as I notice them. Some files are a bit questionable (misc.c, osd.c, configfiles.c), and suggestions how to organize this better are welcome. Regressions are possible due to reorganized include statements. Obviously I didn't just copy mplayer.c's orgy of include statements, but recreated them for each file. It's easily possible that there are oversights and mistakes, which will show up on other platforms. There is one actual change: the public avutil.h include is removed from encode.h, and I tried to replace most FFMIN/FFMAX/av_clip uses. I consider using libavutil too much as dangerous, because the set of include files they recursively pull in is rather arbitrary and is different between FFmpeg and Libav.
2013-10-29 21:38:29 +00:00
}