This is the latest firmware version for AR3012 2.2.1.
This also includes configuration file for coex support,
where all Bluetooth traffic is treated as high priority.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add firmware file for the T210 XHCI controller. Note that this is only
compatible with T210 (T124 should continue using nvidia/tegra124/xusb.bin).
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch adds firmware files for the BCM43602 PCIe device
supported by brcmfmac. This device is used in router equipment
like Netgear R8000. For this reason there are two firmware
files in this patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the Kaveri MEC firmware to #396 (from #391).
The MEC firmware is mainly used for amdkfd - AMD's HSA Linux kernel driver.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This is the latest firmware from 10.2.4 firmware branch.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This fixes a variety of issues, including but not limited to:
ath9k_htc_firmware: check only the mesh control present subfield
Fix: bug in extend_tsf near 0x8000000 values
FIX: support rstamps from the future too.
Firmware sometimes returns erroneous timestamps(2)
Fixed incorrect wrapping handling in ath_extend_tsf().
Firmware sometimes returns erroneous timestamps
Added proper synchronization while handling lower 32 bit and
upper 32 bit parts in ar5416GetTsf64().
Fix resetting of txstatus flags.
Fix Array Out of Bounds in rcSibUpdate_ht()
ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame
init.c: do cold reboot on exception
wmi:eadd new command WMI_REG_RMW_CMDID
remove transfer type patches for EP3 and EP4
k2_fw_usb_api: workaround for EP4 bug.
k2_fw_usb_api: prevent buffer overflow.
k2_fw_usb_api: fix typo in usb reg address
k2_fw_usb_api: add delay after mac reset
simplify STBC handling
This has been tested on both AR7010 and AR9271 devices.
Signed-off-by: Adrian Chadd <adrian@FreeBSD.org>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add firmware file for the T124 XHCI controller, along with the NVIDIA
license file.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This fixes a variety of issues, including but not limited to:
ath9k_htc_firmware: check only the mesh control present subfield
Fix: bug in extend_tsf near 0x8000000 values
FIX: support rstamps from the future too.
Firmware sometimes returns erroneous timestamps(2)
Fixed incorrect wrapping handling in ath_extend_tsf().
Firmware sometimes returns erroneous timestamps
Added proper synchronization while handling lower 32 bit and
upper 32 bit parts in ar5416GetTsf64().
Fix resetting of txstatus flags.
Fix Array Out of Bounds in rcSibUpdate_ht()
ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame
init.c: do cold reboot on exception
wmi:eadd new command WMI_REG_RMW_CMDID
remove transfer type patches for EP3 and EP4
k2_fw_usb_api: workaround for EP4 bug.
k2_fw_usb_api: prevent buffer overflow.
k2_fw_usb_api: fix typo in usb reg address
k2_fw_usb_api: add delay after mac reset
simplify STBC handling
This has been tested on both AR7010 and AR9271 devices.
Signed-off-by: Adrian Chadd <adrian@FreeBSD.org>
This patch rebrands the BFA/BNA inbox driver firmwares.
This patch adds 3.2.5.1 firmware files for QLogic BR-series Adapters that will
be used with the inbox drivers(BFA and BNA).
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This fixes issues that were seen in -10.ucode for the
devices listed above.
Version number: 23.14.10.0
Revision number: 123233
Build number: WFFW11203
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This patch updates the firmware patch for Intel Bluetooth 7265 (D0)
also known as Intel StP D0.
Patch Version: 09
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B6)
also known as Intel WP1 B6.
Patch Version: 24
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7265 (C0)
also known as Intel StP C0.
Patch Version: 40
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B5)
also known as Intel WP2 B5.
Patch Version: 24
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B4)
also known as Intel WP1 B4
Patch Version: 72
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This patch updates the firmware patch for Intel Bluetooth 7260 (B3)
also known as Intel WP2 B3.
Patch Version: 72
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This adds the fw_sst_22a8.bin binary for the Intel Braswell platforms
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Update firmware intel/IntcSST2.bin from Version 8.4.1.68 to 8.4.1.77
Fix for freeing capture stream just after resetting it.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p112
Bluetooth (SDIO) firmware version: 15.28.4.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p112
Bluetooth (USB) firmware version: 15.28.4.p112
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p106
Bluetooth (SDIO) firmware version: 15.28.4.p106
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p106
Bluetooth (USB) firmware version: 15.28.4.p106
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (USB) firmware version: 14.68.22.p16
Bluetooth (USB) firmware version: 14.28.22.p16
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: James Jan <jjan@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p5
Bluetooth (SDIO) firmware version: 15.29.7.p5
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Version 14.68.29.p38
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p103
Bluetooth (SDIO) firmware version: 15.28.4.p103
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Version 14.66.35.p52
Note that this version doesn't support BT-AMP.
The image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Version 14.66.9.p192
Note that this version doesn't support BT-AMP.
The image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p73
Bluetooth (SDIO) firmware version: 15.28.4.p73
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (USB) firmware version: 15.68.4.p22
Bluetooth (USB) firmware version: 15.28.4.p22
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (PCIe) firmware version: 15.68.4.p22
Bluetooth (USB) firmware version: 15.28.4.p22
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.4.p22
Bluetooth (SDIO) firmware version: 15.28.4.p22
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
