This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).
FW Build: REL0395
Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).
FW Build: REL0395
Release Version: 20.110.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
These NVIDIA-signed firmwares are required to enable the Cypress
Type-C controller on TU10x GPUs.
FW versions:
Secondary: 42
Primary: 3.1.10
Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
This patch adds new FW for bnx2x, which adds the following:
- TX VLAN filtering support.
- Enable TPA only for packets without VLAN.
It also addresses few critical issues,
- Fairness algorithm misbehaviour when minimum bandwidth configured
for all PFs.
- Error recovery issue on TAPE devices.
- FW not discarding FIP frames that are not designated to PF.
- Kernel driver initialization failure after preboot driver.
- VxLAN stops working after sending inner IP fragmented traffic.
- Issues in the following FW flows:
SD VLAN update, TX packet drop, packet padding flow, vlan add/remove.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
WLAN (PCIe) firmware version: W16.68.1.p195
Bluetooth (USB) firmware version: 16.26.1.p195
In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB. The combo image will be downloaded through WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
WLAN (SDIO) firmware version: W15.68.19.17
Bluetooth (SDIO) firmware version: 15.26.19.17
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
WLAN (SDIO) firmware version: W16.68.1.p195
Bluetooth (SDIO) firmware version: 16.26.1.p195
Both WLAN and bluetooth are on SDIO interface.
The combo image can be downloaded either through WLAN or
Bluetooth.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Hemantkumar Suthar <shemant@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
- Fix NVRAM config file name for BCM43430 used by Raspberry Pi 3 Model B
-----BEGIN PGP SIGNATURE-----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=nii0
-----END PGP SIGNATURE-----
Merge tag 'add-rpi-fw' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware
- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Fix NVRAM config file name for BCM43430 used by Raspberry Pi 3 Model B
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
BCM43430 NVRAM config file for the RPi3 Model B was set to the value
found by brcmf_dmi_probe(), but should use the DT compatible.
Rename the file to actually make it work with the kernel driver.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
This patch updates the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).
FW Build: REL0295
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 8260
also it is known as Intel Snowfield Peak (SfP)
FW Build: REL0522
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9260
Also it is known as Intel ThunderPeak (THP).
FW Build: REL0386
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
This patch updates the firmware file for Intel Bluetooth 9560
Also it is known as Intel JeffersonPeak (JfP).
FW Build: REL0386
Release Version: 20.100.0.3
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
- Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
-----BEGIN PGP SIGNATURE-----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=X7VX
-----END PGP SIGNATURE-----
Merge tag 'add-rpi-fw' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware
- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add new versions of the firmwares for 9260 and 9000.
Build number: Core_build_core40-120
Revision numbers: 95eb4e97 (9260, 9000)
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This reverts commit ec4b0cd394.
This causes GPU hangs for some users. Let's revert for now
while we try and root cause the issue.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6330 Wifi/BT module as used on the
Prowise PT301 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Prowise PT301 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Broadcom 43430 WiFi/BT chip as found on the
Chuwi Vi8 Plus tablet's mainboard. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Chuwi Vi8 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6234 Wifi/BT module as used on the
Meegopad T08 HDMI stick. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Meegopad T08 HDMI stick.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
Jumper EZpad mini 3 tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Jumper EZpad mini 3 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6212 Wifi/BT module as used on the
ONDA V80 Plus tablet. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the ONDA V80 Plus tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6356 Wifi/BT module as used in the
GPD win handheld. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the GPD win handheld.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Lemaker, the manufacturer of the Banana Pro board has always shipped
the NVRAM file from the Cubietech Cubietruck wifi for use with the
Ampak AP6181 43362 WiFi/BT module on the Banana Pro.
This commit adds a symlink from brcmfmac43362-sdio.lemaker,bananapro.txt
to brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt to match this, making
the Wifi on the Banana Pro work OOTB.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Add a NVRAM file for the Ampak AP6210 Wifi/BT module as found on the
Cubietech Cubietruck board. This file is based on the existing
brcm/brcmfmac43430-sdio.AP6212.txt NVRAM file with the values adjusted
for the Cubietech Cubietruck board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
We are going to add more brcmfmac NVRAM files and some of these will have
spaces in their names, lets be consistens and use quotes around the
filenames of all brcmfmac NVRAM files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
Some vendors save a couple of cents by not including an eeprom for
wifi parameters on their boards. Instead the driver loads these board
specific parameters through the request_firmware mechanism.
Since these are board specific the filenames also must be board specific,
on x86 DMI strings are used for this and the wifi chipname is postfixed
with $sys_vendor-$product_name from the DMI tables. These DMi variables
may contain spaces.
This commit adds support to check_whence.py for filenames with spaces
in them, after this commit these can be specified by putting double-quotes
around them, e.g "name with spaces.bin".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
These files come from the RealtekBluetoothUartPackage_2.17.119.0525 file
which can be downloaded from realtek.com. The download is marked as version
1.0.245.3 / 05/08/2017 on the download page.
The added rtl_bt/rtl8723bs_fw.bin file is called
rtl8723b_mp_bt40_fw_asic_rom_patch.bin in the download.
The added rtl_bt/rtl8723bs_config-OBDA8723.bin file is the
rtl8723b_config_internal.bin file with the UART baudrate changed to
1500000 bps.
I've examined aprox. 20 different Intel BYT/CHT boards, with an RTL8723BS
with the OBDA8723 ACPI ID for the bluetooth part. On these boards the
original firmware image uses either 1500000 or 3000000 bps, so 1500000 bps
is chosen as the safe option which should work everywhere.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>