ipmi_exporter/README.md

Prometheus IPMI Exporter
========================

This is an IPMI exporter for [Prometheus](https://prometheus.io).

It supports both the regular `/metrics` endpoint, exposing metrics from the
host that the exporter is running on, as well as an `/ipmi` endpoint that
supports IPMI over RMCP - one exporter running on one host can be used to
monitor a large number of IPMI interfaces by passing the `target` parameter to
a scrape.

The exporter relies on tools from the
[FreeIPMI](https://www.gnu.org/software/freeipmi/) suite for the actual IPMI
implementation.

## Installation

You need a Go development environment. Then, run the following to get the
source code and build and install the binary:

    go get github.com/soundcloud/ipmi_exporter

## Running

A minimal invocation looks like this:

    ./ipmi_exporter

Supported parameters include:

 - `web.listen-address`: the address/port to listen on (default: `":9290"`)
 - `config.file`: path to the configuration file (default: none)
 - `freeipmi.path`: path to the FreeIPMI executables (default: rely on `$PATH`)

For syntax and a complete list of available parameters, run:

    ./ipmi_exporter -h

Make sure you have the following tools from the
[FreeIPMI](https://www.gnu.org/software/freeipmi/) suite installed:

 - `ipmimonitoring`/`ipmi-sensors`
 - `ipmi-dcmi`
 - `bmc-info`


### How to run as non root

When running this exporter as non root, you should do the followings.

   1. add sudoers files to permit the following commands
      ```bash
      ipmi-exporter ALL = NOPASSWD:/usr/sbin/ipmimonitoring, /usr/sbin/ipmi-sensors, /usr/sbin/ipmi-dcmi, /usr/sbin/bmc-info
      ```
  2. create the script under user dir with execute permission
      ```bash
      #!/bin/sh
      sudo /usr/sbin/$(basename $0) "$@"
      ```
  3. create symlinks under user dir
      ```bash
      ln -s /home/ipmi-exporter/[script name] /home/ipmi-exporter/ipmimonitoring
      ln -s /home/ipmi-exporter/[script name] /home/ipmi-exporter/ipmi-sensors
      ln -s /home/ipmi-exporter/[script name] /home/ipmi-exporter/ipmi-dcmi
      ln -s /home/ipmi-exporter/[script name] /home/ipmi-exporter/bmc-info
      ````
  4. execute ipmi-exporter with the option
      `--freeipmi.path=/home/ipmi-exporter`

### Running with docker (NOTE: remote metrics only)

The root folder contains a `Dockerfile` and an example `docker-compose.yml`.
Edit the `ipmi_remote.yml` file to configure IPMI credentials, then run with:

```
$ sudo docker-compose up -d
```

By default, the server will bind on `0.0.0.0:9290`.


## Configuration

Simply scraping the standard `/metrics` endpoint will make the exporter emit
local IPMI metrics. No special configuration is required.

For remote metrics, the general configuration pattern is similar to that of the
[blackbox exporter](https://github.com/prometheus/blackbox_exporter), i.e.
Prometheus scrapes a small number (possibly one) of IPMI exporters with a
`target` and `module` URL parameter to tell the exporter which IPMI device it
should use to retrieve the IPMI metrics. We offer this approach as IPMI devices
often provide useful information even while the supervised host is turned off.
If you are running the exporter on a separate host anyway, it makes more sense
to have only a few of them, each probing many (possibly thousands of) IPMI
devices, rather than one exporter per IPMI device.

### IPMI exporter

The exporter can read a configuration file by setting `config.file` (see
above). To collect local metrics, you might not even need one. For
remote metrics, it must contain at least user names and passwords for IPMI
access to all targets to be scraped. You can additionally specify the IPMI
driver type and privilege level to use (see `man 5 freeipmi.conf` for more
details and possible values).

The config file supports the notion of "modules", so that different
configurations can be re-used for groups of targets. See the section below on
how to set the module parameter in Prometheus. The special module "default" is
used in case the scrape does not request a specific module.

The configuration file also supports a blacklist of sensors, useful in case of
OEM-specific sensors that FreeIPMI cannot deal with properly or otherwise
misbehaving sensors. This applies to both local and remote metrics.

There are two commented example configuration files, see `ipmi_local.yml` for
scraping local host metrics and `ipmi_remote.yml` for scraping remote IPMI
interfaces.

### Prometheus

#### Local metrics

Collecting local IPMI metrics is fairly straightforward. Simply configure your
server to scrape the default metrics endpoint on the hosts running the
exporter.

```
- job_name: ipmi
  scrape_interval: 1m
  scrape_timeout: 30s
  metrics_path: /metrics
  scheme: http
  static_configs:
  - targets:
    - 10.1.2.23:9290
    - 10.1.2.24:9290
    - 10.1.2.25:9290
```

#### Remote metrics

To add your IPMI targets to Prometheus, you can use any of the supported
service discovery mechanism of your choice. The following example uses the
file-based SD and should be easy to adjust to other scenarios.

Create a YAML file that contains a list of targets, e.g.:

```
---
- targets:
  - 10.1.2.23
  - 10.1.2.24
  - 10.1.2.25
  - 10.1.2.26
  - 10.1.2.27
  - 10.1.2.28
  - 10.1.2.29
  - 10.1.2.30
  labels:
    job: ipmi_exporter
```

This file needs to be stored on the Prometheus server host.  Assuming that this
file is called `/srv/ipmi_exporter/targets.yml`, and the IPMI exporter is
running on a host that has the DNS name `ipmi-exporter.internal.example.com`,
add the following to your Prometheus config:

```
- job_name: ipmi
  params:
    module: default
  scrape_interval: 1m
  scrape_timeout: 30s
  metrics_path: /ipmi
  scheme: http
  file_sd_configs:
  - files:
    - /srv/ipmi_exporter/targets.yml
    refresh_interval: 5m
  relabel_configs:
  - source_labels: [__address__]
    separator: ;
    regex: (.*)
    target_label: __param_target
    replacement: ${1}
    action: replace
  - source_labels: [__param_target]
    separator: ;
    regex: (.*)
    target_label: instance
    replacement: ${1}
    action: replace
  - separator: ;
    regex: .*
    target_label: __address__
    replacement: ipmi-exporter.internal.example.com:9290
    action: replace
```

This assumes that all hosts use the default module. If you are using modules in
the config file, like in the provided `ipmi_remote.yml` example config, you
will need to specify on job for each module, using the respective group of
targets.

In a more extreme case, for example if you are using different passwords on
every host, a good approach is to generate an exporter config file that uses
the target name as module names, which would allow you to have single job that
uses label replace to set the module. Leave out the `params` in the job
definition and instead add a relabel rule like this one:

```
  - source_labels: [__address__]
    separator: ;
    regex: (.*)
    target_label: __param_module
    replacement: ${1}
    action: replace
```

For more information, e.g. how to use mechanisms other than a file to discover
the list of hosts to scrape, please refer to the [Prometheus
documentation](https://prometheus.io/docs).

## Exported data

### Scrape meta data

These metrics provide data about the scrape itself:

 - `ipmi_up{collector="<NAME>"}` is `1` if the data for this collector could
   successfully be retrieved from the remote host, `0` otherwise. The following
   collectors are available and can be enabled or disabled in the config:
   - `ipmi`: collects IPMI sensor data. If it fails, sensor metrics (see below)
     will not be available
   - `dcmi`: collects DCMI data, currently only power consumption. If it fails,
     power consumption metrics (see below) will not be available
   - `bmc`: collects BMC details. If if fails, BMC info metrics (see below)
     will not be available
 - `ipmi_scrape_duration_seconds` is the amount of time it took to retrieve the
   data

### BMC info

This metric is only provided if the `bmc` collector is enabled.

For some basic information, there is a constant metric `ipmi_bmc_info` with
value `1` and labels providing the firmware revision and manufacturer as
returned from the BMC. Example:

    ipmi_bmc_info{firmware_revision="2.52",manufacturer_id="Dell Inc. (674)"} 1

### Power consumption

This metric is only provided if the `dcmi` collector is enabled.

The metric `ipmi_dcmi_power_consumption_current_watts` can be used to monitor
the live power consumption of the machine in Watts. If in doubt, this metric
should be used over any of the sensor data (see below), even if their name
might suggest that they measure the same thing. This metric has no labels.

### Sensors

These metric are only provided if the `ipmi` collector is enabled.

IPMI sensors in general have one or two distinct pieces of information that are
of interest: a value and/or a state. The exporter always exports both, even if
the value is NaN or the state non-sensical. This is so one can still always
find the metrics to avoid ending up in a situation where one is looking for
e.g. the value of a sensor that is in a critical state, but can't find it and
assume this to be a problem.

The state of a sensor can be one of _nominal_, _warning_, _critical_, or _N/A_,
reflected by the metric values `0`, `1`, `2`, and `NaN` respectively. Think of
this as a kind of severity.

For sensors with known semantics (i.e. units), corresponding specific metrics
are exported. For everything else, generic metrics are exported.

#### Temperature sensors

Temperature sensors measure a temperature in degrees Celsius and their state
usually reflects the temperature going above the vendor-recommended value. For
each temperature sensor, two metrics are exported (state and value), using the
sensor ID and the sensor name as labels. Example:

    ipmi_temperature_celsius{id="18",name="Inlet Temp"} 24
    ipmi_temperature_state{id="18",name="Inlet Temp"} 0

#### Fan speed sensors

Fan speed sensors measure fan speed in rotations per minute (RPM) and their
state usually reflects the speed being to low, indicating the fan might be
broken. For each fan speed sensor, two metrics are exported (state and value),
using the sensor ID and the sensor name as labels. Example:

    ipmi_fan_speed_rpm{id="12",name="Fan1A"} 4560
    ipmi_fan_speed_state{id="12",name="Fan1A"} 0

#### Voltage sensors

Voltage sensors measure a voltage in Volts. For each voltage sensor, two
metrics are exported (state and value), using the sensor ID and the sensor name
as labels. Example:

    ipmi_voltage_state{id="2416",name="12V"} 0
    ipmi_voltage_volts{id="2416",name="12V"} 12

#### Current sensors

Current sensors measure a current in Amperes. For each current sensor, two
metrics are exported (state and value), using the sensor ID and the sensor name
as labels. Example:

    ipmi_current_state{id="83",name="Current 1"} 0
    ipmi_current_amperes{id="83",name="Current 1"} 0

#### Power sensors

Power sensors measure power in Watts. For each power sensor, two metrics are
exported (state and value), using the sensor ID and the sensor name as labels.
Example:

    ipmi_power_state{id="90",name="Pwr Consumption"} 0
    ipmi_power_watts{id="90",name="Pwr Consumption"} 70

Note that based on our observations, this may or may not be a reading
reflecting the actual live power consumption. We recommend using the more
explicit [power consumption metrics](#power_consumption) for this.

#### Generic sensors

For all sensors that can not be classified, two generic metrics are exported,
the state and the value.  However, to provide a little more context, the sensor
type is added as label (in addition to name and ID). Example:

    ipmi_sensor_state{id="139",name="Power Cable",type="Cable/Interconnect"} 0
    ipmi_sensor_value{id="139",name="Power Cable",type="Cable/Interconnect"} NaN