This patch modifies the current http-request capture function
and adds a new keyword "id" that permits to identify a capture slot.
If the identified doesn't exists, the action fails silently.
Note that this patch removs an unused list initilisation, which seems
to be inherited from a copy/paste. It's harmless and does not need to
be backported.
LIST_INIT((struct list *)&rule->arg.act.p[0]);
This patch adds "capture-req" and "capture-res". These two converters
capture their entry in the allocated slot given in argument and pass
the input on the output.
This patch adds a new keyword called "declare". This keyword
allow to declare some capture slots in requests and response.
It is useful for sharing capture between frontend and backends.
This function tries to spot a proxy by its name, ID and type, and
in case some elements don't match, it tries to determine which ones
could be ignored and reports which ones were ignored so that the
caller can decide whether or not it wants to pick this proxy. This
will be used for maintaining the status across reloads where the
config might have changed a bit.
It does the same as the other one except that it only focuses on the
numeric ID and the capabilities. It's used by proxy_find_by_name()
for numeric names.
These ones were already obsoleted in 1.4, marked for removal in 1.5,
and not documented anymore. They used to emit warnings, and do still
require quite some code to stay in place. Let's remove them now.
We don't use findproxy_mode() anymore so we can check the conflicting
modes and report the anomalies accordingly with line numbers and more
explicit details.
Now that we can't have duplicate proxies with similar capabilities, we
can remove some painful check. The first one is the check that made the
lookup function return NULL when a duplicate is found, as it prevented
it from being used in the config parser to detect duplicates.
First, findproxy() was renamed proxy_find_by_name() so that its explicit
that a name is required for the lookup. Second, we give this function
the ability to search for tables if needed. Third we now provide inline
wrappers to pass the appropriate PR_CAP_* flags and to explicitly look
up a frontend, backend or table.
A nasty situation happens when two tables have the same name. Since it
is possible to declare a table in a frontend and another one in a backend,
this situation may happen and result in a random behaviour each time a
table is designated in a "stick" or "track" rule. Let's make sure this
is properly detected and stopped. Such a config will now report :
[ALERT] 145/104933 (31571) : parsing [prx.cfg:36] : stick-table name 't' conflicts with table declared in frontend 't' at prx.cfg:30.
[ALERT] 145/104933 (31571) : Error(s) found in configuration file : prx.cfg
[ALERT] 145/104933 (31571) : Fatal errors found in configuration.
Since 1.4 we used to emit a warning when two frontends or two backends
had the same name. In 1.5 we added the same warning for two peers sections.
In 1.6 we added the same warning for two mailers sections. It's about time
to reject such invalid configurations, the impact they have on the code
complexity is huge and it is becoming a real obstacle to some improvements
such as restoring servers check status across reloads.
Now these errors are reported as fatal errors and will need to be fixed.
Anyway, till now there was no guarantee that what was written was working
as expected since the behaviour is not defined (eg: use_backend with a
name used by two backends leads to undefined behaviour).
Example of output :
[ALERT] 145/104759 (31564) : Parsing [prx.cfg:12]: mailers section 'm' has the same name as another mailers section declared at prx.cfg:10.
[ALERT] 145/104759 (31564) : Parsing [prx.cfg:16]: peers section 'p' has the same name as another peers section declared at prx.cfg:14.
[ALERT] 145/104759 (31564) : Parsing [prx.cfg:21]: frontend 'f' has the same name as another frontend declared at prx.cfg:18.
[ALERT] 145/104759 (31564) : Parsing [prx.cfg:27]: backend 'b' has the same name as another backend declared at prx.cfg:24.
[ALERT] 145/104759 (31564) : Error(s) found in configuration file : prx.cfg
[ALERT] 145/104759 (31564) : Fatal errors found in configuration.
The "name" and "name_len" arguments in function "smp_fetch_url_param"
could be left uninitialized for subsequent calls.
[wt: no backport needed, this is an 1.6 regression introduced by
commit 4fdc74c ("MINOR: http: split the url_param in two parts") ]
For backend load balancing it sometimes makes sense to redispatch rather
than retrying against the same server. For example, when machines or routers
fail you may not want to waste time retrying against a dead server and
would instead prefer to immediately redispatch against other servers.
This patch allows backend sections to specify that they want to
redispatch on a particular interval. If the interval N is positive the
redispatch occurs on every Nth retry, and if the interval N is negative then
the redispatch occurs on the Nth retry prior to the last retry (-1 is the
default and maintains backwards compatibility). In low latency environments
tuning this setting can save a few hundred milliseconds when backends fail.
This patch is the part of the body_param fetch. The goal is to have
generic url-encoded parser which can used for parsing the query string
and the body.
Commit 9ff95bb ("BUG/MEDIUM: peers: correctly configure the client timeout")
uncovered an old bug in the peers : upon disconnect, we reconnect immediately.
This sometimes results in both ends to do the same thing in parallel causing
a loop of connect/accept/close/close that can last several seconds. The risk
of occurrence of the trouble increases with latency, and is emphasized by the
fact that idle connections are now frequently recycled (after 5s of idle).
In order to avoid this we must apply a random delay before reconnecting.
Fortunately the mechanism already supports a reconnect delay, so here we
compute the random timeout when killing a session. The delay is 50ms plus
a random between 0 and 2 seconds. Ideally an exponential back-off would
be preferred but it's preferable to keep the fix simple.
This bug was reported by Marco Corte.
This fix must be backported to 1.5 since the fix above was backported into
1.5.12.
There are some situations hwere it's desirable to scan multiple occurrences
of a same parameter name in the query string. This change ensures this can
work, even with an empty name which will then iterate over all parameters.
Until now, HAproxy needed to be restarted to change the TLS ticket
keys. With this patch, the TLS keys can be updated on a per-file
basis using the admin socket. Two new socket commands have been
introduced: "show tls-keys" and "set ssl tls-keys".
Signed-off-by: Nenad Merdanovic <nmerdan@anine.io>
Within the listener struct we need to use a reference to the TLS
ticket keys which binds the actual keys with the filename. This will
make it possible to update the keys through the socket
Signed-off-by: Nenad Merdanovic <nmerdan@anine.io>
If a tcp-check sequence starts with "comment", then the action is not
matched in the while() loop and the pointer doesn't advance so we face
an endless loop. It is normally detected early except in the case where
very slow checks are performed causing it to trigger after the admin stops
watching.
This bug is 1.6-only and very recent so it didn't have the time to affect
anyone.
The method used to skip to next rule in the list is wrong, it assumes
that the list element starts at the same offset as the rule. It happens
to be true on most architectures since the list is the first element for
now but it's definitely wrong. Now the code doesn't crash anymore when
the struct list is moved anywhere else in the struct tcpcheck_rule.
This fix must be backported to 1.5.
This is the most important fix of this series. There's a risk of endless
loop and crashes caused by the fact that we go past the head of the list
when skipping to next rule, without checking if it's still a valid element.
Most of the time, the ->action field is checked, which points to the proxy's
check_req pointer (generally NULL), meaning the element is confused with a
TCPCHK_ACT_SEND action.
The situation was accidently made worse with the addition of tcp-check
comment since it also skips list elements. However, since the action that
makes it go forward is TCPCHK_ACT_COMMENT (3), there's little chance to
see this as a valid pointer, except on 64-bit machines where it can match
the end of a check_req string pointer.
This fix heavily depends on previous cleanup and both must be backported
to 1.5 where the bug is present.
There is some unobvious redundancy between the various ways we can leave
the loop. Some of them can be factored out. So now we leave the loop when
we can't go further, whether it's caused by reaching the end of the rules
or by a blocking I/O.
When the end of the list is reached, the current step's action is checked
to know if we must poll or not. Unfortunately, the main reason for going
there is that we walked past the end of list and current_step points to
the head. We cannot dereference ->action since it does not belong to this
structure and can definitely crash if the address is not mapped.
This bug is unlikely to cause a crash since the action appears just after
the list, and corresponds to the "char *check_req" pointer in the proxy
struct, and it seems that we can't go there with current_step being null.
At worst it can cause the check to register for recv events.
This fix needs to be backported to 1.5 since the code is incorrect there
as well.
This cleanup is a preliminary requirement to the upcoming fixes for
the bug that affect tcp-check's improper use of lists. It will have
to be backported to 1.5 though it will not easily apply.
There are two variables pointing to the current rule within the loop,
and either one or the other is used depending on the code blocks,
making it much harder to apply checks to fix the list walking bug.
So first get rid of "cur" and only focus on current_step.
Environment variables were expandables only in adresses.
Now there are expandables everywhere in the configuration file within
double quotes.
This patch breaks compatibility with the previous behavior of
environment variables in adresses, you must enclose adresses with double
quotes to make it work.
Recent commit 22b09d2 ("MINOR: include comment in tcpcheck error log")
accidently left a double-step to the next rule in case of an inverted
rule. The effect is that an inverted rule is necessarily skipped and
that we can crash if it was the last rule since we'd use as a rule the
head of the list, thus dereference random memory contents.
No backport is needed.
tcpcheck error messages include the step id where the error occurs.
In some cases, this is not enough. Now, HAProxy also use the comment
field of the latest tcpcheck rule which has been run.
This commit allows HAProxy to parse a new directive in the tcpcheck
ruleset: 'comment'.
It is used to setup comments on the current tcpcheck rules.
A new field is added into the tcpcheck_rule structure.
This field will host a string used as a comment to describe the rule.
Then this comment can be used in logs to report a more user friendly
message on the step which failed during the tcpcheck ruleset.
in src.checks.c, the function tcpcheck_get_step_id is called many times.
In order to save some cpu cycles, I save the result of this function in
an integer.
Baptiste reported that commit 0a9a2b8 ("MEDIUM: sample change the
prototype of sample-fetches and converters functions") broke the
build of ssl_sock.c when using openssl-1.0.2 because one missed
replacement of sess with smp->sess. No backport is needed.
Options are relative to the sample. Each sample fetched is associated with
fetch options or fetch flags.
This patch adds the 'opt' vaue in the sample struct. This permits to reduce
the sample-fetch function prototype. In other way, the converters will have
more detail about the origin of the sample.
This patch removes the structs "session", "stream" and "proxy" from
the sample-fetches and converters function prototypes.
This permits to remove some weight in the prototype call.
Some sample analyzer (sample-fetch or converters) needs to known the proxy,
session and stream attached to the sampel. The sample-fetches and the converters
function pointers cannot be called without these 3 pointers filled.
This patch permits to reduce the sample-fetch and the converters called
prototypes, and provides a new mean to add information for this type of
functions.
