The structure owns an error message, most of time loaded from a file, and
converted to HTX. It is created when an errorfile or errorloc directive is
parsed. It is renamed to avoid ambiguities with http_reply structure.
The http_reply structure is added. It represents a generic HTTP message used as
internal response by HAProxy. It is based on the structure used to store http
return rules. The aim is to store all error messages using this structure, as
well as http return and http deny rules.
For HTTP rules, this flag is only used to trigger a warning during HAProxy
startup when a final rule without ACL is not the last one. So this patch is
marked as a bug, but its impact is really limited.
No backport needed because http return rules were introduced in the 2.2.
TX_CLDENY, TX_CLALLOW, TX_SVDENY and TX_SVALLOW flags are unused. Only
TX_CLTARPIT is used to make the difference between an http deny rule and an http
tarpit rule. So these unused flags are removed.
In the CLI command 'show ssl crt-list', the ssl-min-ver and the
ssl-min-max arguments were always displayed because the dumped versions
were the actual version computed and used by haproxy, instead of the
version found in the configuration.
To fix the problem, this patch separates the variables to have one with
the configured version, and one with the actual version used. The dump
only shows the configured version.
let us switch to github mirror, travis cannot download original libslz
error is:
fatal: unable to access 'http://git.1wt.eu/git/libslz.git/': Failed
to connect to git.1wt.eu port 80: Connection timed out The command
"git clone http://git.1wt.eu/git/libslz.git/" failed and exited with
128...
This reverts commit 957ec59571.
As discussed with Emeric, the current syntax is not extensible enough,
this will be turned to a section instead in a forthcoming patch.
The ring to applet communication was only made to deal with CLI functions
but it's generic. Let's have generic appctx functions and have the CLI
rely on these instead. This patch introduces ring_attach_appctx() and
ring_detach_appctx().
A few fields, including a generic list entry, were added to the CLI context
by commit 300decc8d9 ("MINOR: cli: extend the CLI context with a list and
two offsets"). It turns out that the list entry (l0) is solely used to
consult rings and that the generic ring_write() code is restricted to a
consumer on the CLI due to this, which was not the initial intent. Let's
make it a general purpose wait_entry field that is properly initialized
during appctx_init(). This will allow any applet to wait on a ring, not
just the CLI.
The LIST_ADDQ() and LIST_DEL_INIT() calls made to attach/detach a waiter
to the ring were made under a read lock which was sufficient in front of
the writer's write lock. But it's not sufficient against other readers!
Thus theorically multiple "show events" on the same ring buffer on the
CLI could result in a crash, even though for now I couldn't manage to
reproduce it.
This fixes commit 1d181e489c ("MEDIUM: ring: implement a wait mode for
watchers") so it must be backported to 2.1, possibly further if the ring
code gets backported.
Because of a typo error in conditions to exit the sending loop, it is possible
to loop infinitely in fcgi_snd_buf() function. Instead of checking the FCGI
stream is not blocked to continue sending data, the FCGI connection is used. So
it is possible to have a stream blocked because there is not enough space in the
mux buffers to copy more data but continue to loop to send more data.
This patch should fix the issue #637. It must be backported to 2.1.
Instead of using malloc/free to allocate an HPACK table, let's declare
a pool. However the HPACK size is configured by the H2 mux, so it's
also this one which allocates it after post_check.
This patch adds the new global statement:
ring <name> [desc <desc>] [format <format>] [size <size>] [maxlen <length>]
Creates a named ring buffer which could be used on log line for instance.
<desc> is an optionnal description string of the ring. It will appear on
CLI. By default, <name> is reused to fill this field.
<format> is the log format used when generating syslog messages. It may be
one of the following :
iso A message containing only the ISO date, followed by the text.
The PID, process name and system name are omitted. This is
designed to be used with a local log server.
raw A message containing only the text. The level, PID, date, time,
process name and system name are omitted. This is designed to be
used in containers or during development, where the severity only
depends on the file descriptor used (stdout/stderr). This is
the default.
rfc3164 The RFC3164 syslog message format. This is the default.
(https://tools.ietf.org/html/rfc3164)
rfc5424 The RFC5424 syslog message format.
(https://tools.ietf.org/html/rfc5424)
short A message containing only a level between angle brackets such as
'<3>', followed by the text. The PID, date, time, process name
and system name are omitted. This is designed to be used with a
local log server. This format is compatible with what the systemd
logger consumes.
timed A message containing only a level between angle brackets such as
'<3>', followed by ISO date and by the text. The PID, process
name and system name are omitted. This is designed to be
used with a local log server.
<length> is the maximum length of event message stored into the ring,
including formatted header. If the event message is longer
than <length>, it would be truncated to this length.
<name> is the ring identifier, which follows the same naming convention as
proxies and servers.
<size> is the optionnal size in bytes. Default value is set to BUFSIZE.
Note: Historically sink's name and desc were refs on const strings. But with new
configurable rings a dynamic allocation is needed.
Before this path, they rely directly on ring_write bypassing
a part of the sink API.
Now the maxlen parameter of the log will apply only on the text
message part (and not the header, for this you woud prefer
to use the maxlen parameter on the sink/ring).
sink_write prototype was also reviewed to return the number of Bytes
written to be compliant with the other write functions.
This patch extends the sink_write prototype and code to
handle the rfc5424 and rfc3164 header.
It uses header building tools from log.c. Doing this some
functions/vars have been externalized.
facility and minlevel have been removed from the struct sink
and passed to args at sink_write because they depends of the log
and not of the sink (they remained unused by rest of the code
until now).
Historically some messages used to already contain the trailing LF but
not all, and __do_send_log adds a new one in needed cases. It also does
trim a trailing LF in certain cases while computing the max message
length, as a result of subtracting 1 to the available room in the
destination buffer. But the way it's done is wrong since some messages
still contain it.
So the code was fixed to always trim the trailing LF from messages if
present, and then only subtract 1 from the destination buffer room
instead of the size..
Note: new sink API is not designed to receive a trailing LF on
event messages
This could be backported to relevant stable versions with particular
care since the logic of the code changed a bit since 1.6 and there
may be other locations that need to be adjusted.
MySQL 4.1 is old enough to be the default mode for mysql checks. So now, once a
username is defined, post-41 mode is automatically used. To do mysql checks on
previous MySQL version, the argument "pre-41" must be used.
Note, it is a compatibility breakage for everyone using an antique and
unsupported MySQL version.
Helper functions are used to dump bind, server or filter keywords. These
functions are used to report errors during the configuration parsing. To have a
coherent API, these functions are now prepared to handle a null pointer as
argument. If so, no action is performed and functions immediately return.
This patch should fix the issue #631. It is not a bug. There is no reason to
backport it.
parse_cache_flt() is the registered callback for the "cache" filter keyword. It
is only called when the "cache" keyword is found on a filter line. So, it is
useless to test the filter name in the callback function.
This patch should fix the issue #634. It may be backported as far as 1.9.
The CI revealed that the boringssl build is still broken because of some
ifdef misplacement.
Bug introduced by dad3105 ("REORG: ssl: move ssl configuration to
cfgparse-ssl.c").
No backport needed.
Fix issue #633.
Coverity found unused variable assignment
CID 1299671 (#1 of 1): Unused value (UNUSED_VALUE)assigned_pointer:
Assigning value from args[arg + 1] to word here, but that stored
value is overwritten before it can be used.
958 word = args[arg + 1];
959 arg = arg_end;
In issue #632 boringssl build were broken by the lack of errno.h
include in ssl_crtlist.c
Bug introduced by 6e9556b ("REORG: ssl: move crtlist functions to src/ssl_crtlist.c").
No backport needed.
since commit c0cdaffaa3 ("REORG: ssl: move ssl_sock_ctx and fix
cross-dependencies issues"), `struct ssl_sock_ctx` was moved in
ssl_sock.h. As it contains a `struct buffer`, including
`common/buffer.h` is now mandatory. I encountered an issue while
including ssl_sock.h on another patch:
include/types/ssl_sock.h:240:16: error: field ‘early_buf’ has incomplete type
240 | struct buffer early_buf; /* buffer to store the early data received */
no backport needed.
Fixes: c0cdaffaa3 ("REORG: ssl: move ssl_sock_ctx and fix
cross-dependencies issues")
Signed-off-by: William Dauchy <w.dauchy@criteo.com>
Expose native cum_req metric for a server: so far it was calculated as a
sum or all responses. Rename it from Cum. HTTP Responses to Cum. HTTP
Requests to be consistent with Frontend and Backend.
Add swrate_add_dynamic function which is similar to swrate_add, but more
accurate when calculating moving averages when not enough samples have
been processed yet.
there are ongoing arm64 failures in travis-ci. we suspect that
build stucks on scripts/build-ssl.sh which is called during build.
let us try to use openssl from ubuntu distro and not build it
ourselves. to achive that we add "install" section without
build-ssl.sh
In order to move all SSL sample fetches in another file, moving the
ssl_sock_ctx definition in a .h file is required.
Unfortunately it became a cross dependencies hell to solve, because of
the struct wait_event field, so <types/connection.h> is needed which
created other problems.
Add forward declarations in types/ssl_crtlist.h in order to avoid
circular dependencies. Also remove the listener.h include which is not
needed anymore.
The ssl_sock.c file contains a lot of macros and structure definitions
that should be in a .h. Move them to the more appropriate
types/ssl_sock.h file.
Make use of ssl_sock_register_msg_callback(). Function ssl_sock_msgcbk()
is now split into two dedicated functions for heartbeat and clienthello.
They are both registered by using a new callback mechanism for SSL/TLS
protocol messages.
This patch adds the ability to register callbacks for SSL/TLS protocol
messages by using the function ssl_sock_register_msg_callback().
All registered callback functions will be called when observing received
or sent SSL/TLS protocol messages.
