At many places, we now use the new CS functions to get a stream or a channel
from a conn-stream instead of using the stream-interface API. It is the
first step to reduce the scope of the stream-interfaces. The main change
here is about the applet I/O callback functions. Before the refactoring, the
stream-interface was the appctx owner. Thus, it was heavily used. Now, as
far as possible,the conn-stream is used. Of course, it remains many calls to
the stream-interface API.
Some CS flags, only related to the endpoint, are moved into the endpoint
struct. More will probably moved later. Those ones are not critical. So it
is pretty safe to move them now and this will ease next changes.
First gcc, then now coverity report possible null derefs in situations
where we know these cannot happen since we call the functions in
contexts that guarantee the existence of the connection and the method
used. Let's introduce an unchecked version of the function for such
cases, just like we had to do with objt_*. This allows us to remove the
ALREADY_CHECKED() statements (which coverity doesn't see), and addresses
github issues #1643, #1644, #1647.
Some compilers see a possible null deref after conn_get_ssl_sock_ctx()
in ssl_sock_parse_heartbeat, which cannot happen there, so let's mark
it as safe. No backport needed.
The SSL functions must not use conn->xprt_ctx anymore but find the context
by calling conn_get_ssl_sock_ctx(), which will properly pass through the
transport layers to retrieve the desired information. Otherwise when the
functions are called on a QUIC connection, they refuse to work for not
being called on the proper transport.
Historically there was a single way to have an SSL transport on a
connection, so detecting if the transport layer was SSL and a context
was present was sufficient to detect SSL. With QUIC, things have changed
because QUIC also relies on SSL, but the context is embedded inside the
quic_conn and the transport layer doesn't match expectations outside,
making it difficult to detect that SSL is in use over the connection.
The approach taken here to improve this consists in adding a new method
at the transport layer, get_ssl_sock_ctx(), to retrieve this often needed
ssl_sock_ctx, and to use this to detect the presence of SSL. This will
even allow some simplifications and cleanups to be made in the SSL code
itself, and QUIC will be able to provide one to export its ssl_sock_ctx.
Certain functions cannot be called on an FD-less conn because they are
normally called as part of the protocol-specific setup/teardown sequence.
Better place a few BUG_ON() to make sure none of them is called in other
situations. If any of them would trigger in ambiguous conditions, it would
always be possible to replace it with an error.
The OpenSSL engine API is deprecated starting with OpenSSL 3.0.
In order to have a clean build this feature is now disabled by default.
It can be reactivated with USE_ENGINE=1 on the build line.
ASAN complains about the SNI expression not being free upon an haproxy
-c. Indeed the httpclient is now initialized with a sni expression and
this one is never free in the server release code.
Must be backported in 2.5 and could be backported in every stable
versions.
frontend and backend conn-streams are now directly accesible from the
stream. This way, and with some other changes, it will be possible to remove
the stream-interfaces from the stream structure.
Because appctx is now an endpoint of the conn-stream, there is no reason to
still have the stream-interface as appctx owner. Thus, the conn-stream is
now the appctx owner.
Thanks to previous changes, it is now possible to set an appctx as endpoint
for a conn-stream. This means the appctx is no longer linked to the
stream-interface but to the conn-stream. Thus, a pointer to the conn-stream
is explicitly stored in the stream-interface. The endpoint (connection or
appctx) can be retrieved via the conn-stream.
When calling ssl_ocsp_response_print which is used to display an OCSP
response's details when calling the "show ssl ocsp-response" on the CLI,
we use the BIO_read function that copies an OpenSSL BIO into a trash.
The return value was not checked though, which could lead to some
crashes since BIO_read can return a negative value in case of error.
This patch should be backported to 2.5.
When calling the "show ssl ocsp-response" CLI command some OpenSSL
objects need to be created in order to get some information related to
the OCSP response and some of them were not freed.
It should be backported to 2.5.
The b_istput function called to append the last data block to the end of
an OCSP response's detailed output was not checked in
ssl_ocsp_response_print. The ssl_ocsp_response_print return value checks
were added as well since some of them were missing.
This error was raised by Coverity (CID 1469513).
This patch fixes GitHub issue #1541.
It can be backported to 2.5.
The SSL_CTX_set_tmp_dh_callback function was marked as deprecated in
OpenSSLv3 so this patch replaces this callback mechanism by a direct set
of DH parameters during init.
DH structure is a low-level one that should not be used anymore with
OpenSSLv3. All functions working on DH were marked as deprecated and
this patch replaces the ones we used with new APIs recommended in
OpenSSLv3, be it in the migration guide or the multiple new manpages
they created.
This patch replaces all mentions of the DH type by the HASSL_DH one,
which will be replaced by EVP_PKEY with OpenSSLv3 and will remain DH on
older versions. It also uses all the newly created helper functions that
enable for instance to load DH parameters from a file into an EVP_PKEY,
or to set DH parameters into an SSL_CTX for use in a DHE negotiation.
The following deprecated functions will effectively disappear when
building with OpenSSLv3 : DH_set0_pqg, PEM_read_bio_DHparams, DH_new,
DH_free, DH_up_ref, SSL_CTX_set_tmp_dh.
Starting from OpenSSLv3, we won't rely on the
SSL_CTX_set_tmp_dh_callback mechanism so we will need to know the DH
size we want to use during init. In order for the default DH param size
to be used when no RSA or DSA private key can be found for a given bind
line, we will need to know the default size we want to use (which was
not possible the way the code was built, since the global default dh
size was set too late.
The current way the local DH structures are built relies on the fact
that the ssl_get_tmp_dh function would only be called as a callback
during a DHE negotiation, so after all the SSL contexts are built and
the init is over. With OpenSSLv3, this function will now be called
during init, so before those objects are curretly built.
This patch ensures that when calling ssl_get_tmp_dh and trying to use
one of or hard-coded DH parameters, it will be created if it did not
exist yet.
The current DH parameter creation is also kept so that with versions
before OpenSSLv3 we don't end up creating this DH object during a
handshake.
Starting from OpenSSLv3, the DH_set0_pqg function is deprecated and the
use of DH objects directly is advised against so this new helper
function will be used to convert our hard-coded DH parameters into an
EVP_PKEY. It relies on the new OSSL_PARAM mechanism, as described in the
EVP_PKEY-DH manpage.
This helper function will only be used with OpenSSLv3. It simply sets in
an SSL_CTX a set of DH parameters of the same size as a certificate's
private key. This logic is the same as the one used with older versions,
it simply relies on new APIs.
If no pkey can be found the SSL_CTX_set_dh_auto function wll be called,
making the SSL_CTX rely on DH parameters provided by OpenSSL in case of
DHE negotiation.
Starting from OpenSSLv3, the SSL_CTX_set_tmp_dh function is deprecated
and it should be replaced by SSL_CTX_set0_tmp_dh_pkey, which takes an
EVP_PKEY instead of a DH parameter. Since this function is new to
OpenSSLv3 and its use requires an extra EVP_PKEY_up_ref call, we will
keep the two versions side by side, otherwise it would require to get
rid of all DH references in older OpenSSL versions as well.
This helper function is not used yet so this commit should be strictly
iso-functional, regardless of the OpenSSL version.
In the upcoming OpenSSLv3 specific patches, we will make use of the
newly created ssl_get_tmp_dh that returns an EVP_PKEY containing DH
parameters of the same size as a bind line's RSA or DSA private key.
The previously named ssl_get_tmp_dh function was renamed
ssl_get_tmp_dh_cbk because it is only used as a callback passed to
OpenSSL through SSL_CTX_set_tmp_dh_callback calls.
This new function makes use of the new OpenSSLv3 APIs that should be
used to load DH parameters from a file (or a BIO in this case) and that
should replace the deprecated PEM_read_bio_DHparams function.
Note that this function returns an EVP_PKEY when using OpenSSLv3 since
they now advise against using low level structures such as DH ones.
This helper function is not used yet so this commit should be stricly
iso-functional, regardless of the OpenSSL version.
ERR_func_error_string does not return anything anymore with OpenSSLv3,
it can be replaced by ERR_peek_error_func which did not exist on
previous versions.
HMAC_Init_ex being a function that acts on a low-level HMAC_CTX
structure was marked as deprecated in OpenSSLv3.
This patch replaces this call by EVP_MAC_CTX_set_params, as advised in
the migration_guide, and uses the new OSSL_PARAM mechanism to configure
the MAC context, as described in the EVP_MAC and EVP_MAC-HMAC manpages.
SSL_CTX_set_tlsext_ticket_key_cb was deprecated on OpenSSLv3 because it
uses an HMAC_pointer which is deprecated as well. According to the v3's
manpage it should be replaced by SSL_CTX_set_tlsext_ticket_key_evp_cb
which uses a EVP_MAC_CTX pointer.
This new callback was introduced in OpenSSLv3 so we need to keep the two
calls in the source base and to split the usage depending on the OpenSSL
version.
In the context of the 'generate-certificates' bind line option, if an
'ecdhe' option is present on the bind line as well, we use the
SSL_CTX_set_tmp_ecdh function which was marked as deprecated in
OpenSSLv3. As advised in the SSL_CTX_set_tmp_ecdh manpage, this function
should be replaced by the SSL_CTX_set1_groups one (or the
SSL_CTX_set1_curves one in our case which does the same but existed on
older OpenSSL versions as well).
The ECDHE behaviour with OpenSSL 1.0.2 is not the same when using the
SSL_CTX_set1_curves function as the one we have on newer versions.
Instead of looking for a code that would work exactly the same
regardless of the OpenSSL version, we will keep the original code on
1.0.2 and use newer APIs for other versions.
This patch should be strictly isofunctional.
The ecdhe option relies on the SSL_CTX_set_tmp_ecdh function which has
been marked as deprecated in OpenSSLv3. As advised in the
SSL_CTX_set_tmp_ecdh manpage, this function should be replaced by the
SSL_CTX_set1_groups one (or the SSL_CTX_set1_curves one in our case
which does the same but existed on older OpenSSL versions as well).
When using the "curves" option we have a different behaviour with
OpenSSL1.0.2 compared to later versions. On this early version an SSL
backend using a P-256 ECDSA certificate manages to connect to an SSL
frontend having a "curves P-384" option (when it fails with later
versions).
Even if the API used for later version than OpenSSL 1.0.2 already
existed then, for some reason the behaviour is not the same on the older
version which explains why the original code with the deprecated API is
kept for this version (otherwise we would risk breaking everything on a
version that might still be used by some people despite being pretty old).
This patch should be strictly isofunctional.
There were empty lines in the output of the CLI's "show ssl
ocsp-response <id>" command. The plain "show ssl ocsp-response" command
(without parameter) was already managed in commit
cc750efbc5. This patch adds an extra space
to those lines so that the only existing empty lines actually mark the
end of the output. This requires to post-process the buffer filled by
OpenSSL's OCSP_RESPONSE_print function (which produces the output of the
"openssl ocsp -respin <ocsp.pem>" command). This way the output of our
command still looks the same as openssl's one.
Must be backported in 2.5.
Do not proceed to direct accept when creating a new quic_conn. Wait for
the QUIC handshake to succeeds to insert the quic_conn in the accept
queue. A tasklet is then woken up to call listener_accept to accept the
quic_conn.
The most important effect is that the connection/mux layers are not
instantiated at the same time as the quic_conn. This forces to delay
some process to be sure that the mux is allocated :
* initialization of mux transport parameters
* installation of the app-ops
Also, the mux instance is not checked now to wake up the quic_conn
tasklet. This is safe because the xprt-quic code is now ready to handle
the absence of the connection/mux layers.
Note that this commit has a deep impact as it changes significantly the
lower QUIC architecture. Most notably, it breaks the 0-RTT feature.
Fix potential null pointer dereference. In fact, this case is not
possible, only a mistake in SSL ex-data initialization may cause it :
either connection is set or quic_conn, which allows to retrieve
the bind_conf.
A BUG_ON was already present but this does not cover release build.
Allow to register quic_conn as ex-data in SSL callbacks. A new index is
used to identify it as ssl_qc_app_data_index.
Replace connection by quic_conn as SSL ex-data when initializing the QUIC
SSL session. When using SSL callbacks in QUIC context, the connection is
now NULL. Used quic_conn instead to retrieve the required parameters.
Also clean up
The same changes are conducted inside the QUIC SSL methods of xprt-quic
: connection instance usage is replaced by quic_conn.
If an error is raised during the ClientHello callback on the server side
(ssl_sock_switchctx_cbk), the servername callback won't be called and
the client's SNI will not be saved in the SSL context. But since we use
the SSL_get_servername function to return this SNI in the ssl_fc_sni
sample fetch, that means that in case of error, such as an SNI mismatch
with a frontend having the strict-sni option enabled, the sample fetch
would not work (making strict-sni related errors hard to debug).
This patch fixes that by storing the SNI as an ex_data in the SSL
context in case the ClientHello callback returns an error. This way the
sample fetch can fallback to getting the SNI this way. It will still
first call the SSL_get_servername function first since it is the proper
way of getting a client's SNI when the handshake succeeded.
In order to avoid memory allocations are runtime into this highly used
runtime function, a new memory pool was created to store those client
SNIs. Its entry size is set to 256 bytes since SNIs can't be longer than
255 characters.
This fixes GitHub #1484.
It can be backported in 2.5.
This patch unlinks and frees the ckch instance linked to a server during
the free of this server.
This could have locked certificates in a "Used" state when removing
servers dynamically from the CLI. And could provoke a segfault once we
try to dynamically update the certificate after that.
This must be backported as far as 2.4.
A lot of free are missing in ssl_sock_free_srv_ctx(), this could result
in memory leaking when removing dynamically a server via the CLI.
This must be backported in every branches, by removing the fields that
does not exist in the previous branches.
This bug was introduced by d817dc73 ("MEDIUM: ssl: Load client
certificates in a ckch for backend servers") in which the creation of
the SSL_CTX for a server was moved to the configuration parser when
using a "crt" keyword instead of being done in ssl_sock_prepare_srv_ctx().
The patch 0498fa40 ("BUG/MINOR: ssl: Default-server configuration ignored by
server") made it worse by setting the same SSL_CTX for every servers
using a default-server. Resulting in any SSL option on a server applied
to every server in its backend.
This patch fixes the issue by reintroducing a string which store the
path of certificate inside the server structure, and loading the
certificate in ssl_sock_prepare_srv_ctx() again.
This is a quick fix to backport, a cleaner way can be achieve by always
creating the SSL_CTX in ssl_sock_prepare_srv_ctx() and splitting
properly the ssl_sock_load_srv_cert() function.
This patch fixes issue #1488.
Must be backported as far as 2.4.
Since this case was already met previously with commit 655dec81b
("BUG/MINOR: backend: do not set sni on connection reuse"), let's make
sure that we don't change reused connection settings. This could be
generalized to most settings that are only in effect before the handshake
in fact (like set_alpn and a few other ones).
There were empty lines in the output of the CLI's "show ssl
ocsp-response" command (after the certificate ID and between two
certificates). This patch removes them since an empty line should mark
the end of the output.
Must be backported in 2.5.
If the ClientHello callback does not manage to find a correct QUIC transport
parameters extension, we immediately close the connection with
missing_extension(109) as TLS alert which is turned into 0x16d QUIC connection
error.
We set this TLS error when no application protocol could be negotiated
via the TLS callback concerned. It is converted as a QUIC CRYPTO_ERROR
error (0x178).
SSL counters were added with commit d0447a7c3 ("MINOR: ssl: add counters
for ssl sessions") in 2.4, but their updates were not atomic, so it's
likely that under significant loads they are not correct.
This needs to be backported to 2.4.
If we want to run quic-tracker against haproxy, we must at least
support the draft version of the TLS extension for the QUIC transport
parameters (0xffa5). quic-tracker QUIC version is draft-29 at this time.
We select this depending on the QUIC version. If draft, we select the
draft TLS extension.
Since commit c2aae74 ("MEDIUM: ssl: Handle early data with OpenSSL
1.1.1"), the codepath of the clientHello callback changed, letting an
unknown SNI escape with a 'return 1' instead of passing through the
abort label.
An error was still emitted because the frontend continued the handshake
with the initial_ctx, which can't be used to achieve an handshake.
However, it had the ugly side effect of letting the request pass in the
case of a TLS resume. Which could be surprising when combining strict-sni
with the removing of a crt-list entry over the CLI for example. (like
its done in the ssl/new_del_ssl_crlfile.vtc reg-test).
This patch switches the code path of the allow_early and abort label, so
the default code path is the abort one, letting the clientHello returns
the correct SSL_AD_UNRECOGNIZED_NAME in case of errors.
Which means the client will now receive:
OpenSSL error[0x14094458] ssl3_read_bytes: tlsv1 unrecognized name
Instead of:
OpenSSL error[0x14094410] ssl3_read_bytes: sslv3 alert handshake failure
Which was the error emitted before HAProxy 1.8.
This patch must be carrefuly backported as far as 1.8 once we validated
its impact.
When establishing an outboud connection, haproxy checks if the cached
TLS session has the same SNI as the connection we are trying to
resume.
This test was done by calling SSL_get_servername() which in TLSv1.2
returned the SNI. With TLSv1.3 this is not the case anymore and this
function returns NULL, which invalidates any outboud connection we are
trying to resume if it uses the sni keyword on its server line.
This patch fixes the problem by storing the SNI in the "reused_sess"
structure beside the session itself.
The ssl_sock_set_servername() now has a RWLOCK because this session
cache entry could be accessed by the CLI when trying to update a
certificate on the backend.
This fix must be backported in every maintained version, however the
RWLOCK only exists since version 2.4.
The else is not for boringSSL but for the lack of Client Hello callback.
Should have been changed in 1fc44d4 ("BUILD: ssl: guard Client Hello
callbacks with HAVE_SSL_CLIENT_HELLO_CB macro instead of openssl
version").
Could be backported in 2.4.
