With this option, it is possible to establish the connection opened by a
tcp-check connect rule using upstream socks4 proxy. Info from the socks4
parameter on the server are used.
Register the custom action rules "set-var" and "unset-var", that will
call the parse_store() command upon parsing.
These rules are thus built and integrated to the tcp-check ruleset, but
have no further effect for the moment.
Add a dedicated vars scope for checks. This scope is considered as part of the
session scope for accounting purposes.
The scope can be addressed by a valid session, even embryonic. The stream is not
necessary.
The scope is initialized after the check session is created. All variables are
then pruned before the session is destroyed.
Create a session for each healthcheck relying on a tcp-check ruleset. When such
check is started, a session is allocated, which will be freed when the check
finishes. A dummy static frontend is used to create these sessions. This will be
useful to support variables and sample expression. This will also be used,
later, by HTTP healthchecks to rely on HTTP muxes.
The loop in tcpcheck_main() function is quite hard to understand. Depending
where we are in the loop, The current_step is the currentely executed rule or
the one to execute on the next call to tcpcheck_main(). When the check result is
reported, we rely on the rule pointed by last_started_step or the one pointed by
current_step. In addition, the loop does not use the common list_for_each_entry
macro and it is thus quite confusing.
So the loop has been totally rewritten and splitted to several functions to
simplify its reading and its understanding. Tcp-check rules are evaluated in
dedicated functions. And a common for_each loop is used and only one rule is
referenced, the current one.
After the configuration parsing, when its validity check, an implicit tcp-check
connect rule is added in front of the tcp-check ruleset if the first non-comment
rule is not a connect one. This implicit rule is flagged to use the default
check parameter.
This means now, all tcp-check rulesets begin with a connect and are never
empty. When tcp-check healthchecks are used, all connections are thus handled by
tcpcheck_main() function.
To allow reusing these blocks without consuming more memory, their list
should be static and share-able accross uses. The head of the list will
be shared as well.
It is thus necessary to extract the head of the rule list from the proxy
itself. Transform it into a pointer instead, that can be easily set to
an external dynamically allocated head.
Parse back-references in comments of tcp-check expect rules. If references are
made, capture groups in the match and replace references to it within the
comment when logging the error. Both text and binary regex can caputre groups
and reference them in the expect rule comment.
[Cf: I slightly updated the patch. exp_replace() function is used instead of a
custom one. And if the trash buffer is too small to contain the comment during
the substitution, the comment is ignored.]
The rbinary match works similarly to the rstring match type, however the
received data is rewritten as hex-string before the match operation is
done.
This allows using regexes on binary content even with the POSIX regex
engine.
[Cf: I slightly updated the patch. mem2hex function was removed and dump_binary
is used instead.]
Allow declaring tcpcheck connect commands with a new parameter,
"linger". This option will configure the connection to avoid using an
RST segment to close, instead following the four-way termination
handshake. Some servers would otherwise log each healthcheck as
an error.
Some expect rules cannot be satisfied due to inherent ambiguity towards
the received data: in the absence of match, the current behavior is to
be forced to wait either the end of the connection or a buffer full,
whichever comes first. Only then does the matching diagnostic is
considered conclusive. For instance :
tcp-check connect
tcp-check expect !rstring "^error"
tcp-check expect string "valid"
This check will only succeed if the connection is closed by the server before
the check timeout. Otherwise the first expect rule will wait for more data until
"^error" regex matches or the check expires.
Allow the user to explicitly define an amount of data that will be
considered enough to determine the value of the check.
This allows succeeding on negative rstring rules, as previously
in valid condition no match happened, and the matching was repeated
until the end of the connection. This could timeout the check
while no error was happening.
[Cf: I slighly updated the patch. The parameter was renamed and the value is a
signed integer to support -1 as default value to ignore the parameter.]
When receiving additional data while chaining multiple tcp-check expects,
previous inverse expects might have a different result with the new data. They
need to be evaluated again against the new data.
Add a pointer to the first inverse expect rule of the current expect chain
(possibly of length one) to each expect rule. When receiving new data, the
currently evaluated tcp-check rule is set back to this pointed rule.
Fonctionnaly speaking, it is a bug and it exists since the introduction of the
feature. But there is no way for now to hit it because when an expect rule does
not match, we wait for more data, independently on the inverse flag. The only
way to move to the following rule is to be sure no more data will be received.
This patch depends on the commit "MINOR: mini-clist: Add functions to iterate
backward on a list".
[Cf: I slightly updated the patch. First, it only concerns inverse expect
rule. Normal expect rules are not concerned. Then, I removed the BUG tag
because, for now, it is not possible to move to the following rule when the
current one does not match while more data can be received.]
Replace the generic integer with an enumerated list. This allows light
type check and helps debugging (seeing action = 2 in the struct is not
helpful).
This options is used to force a non-SSL connection to check a SSL server or to
invert a check-ssl option inherited from the default section. The use_ssl field
in the check structure is used to know if a SSL connection must be used
(use_ssl=1) or not (use_ssl=0). The server configuration is used by default.
The problem is that we cannot distinguish the default case (no specific SSL
check option) and the case of an explicit non-SSL check. In both, use_ssl is set
to 0. So the server configuration is always used. For a SSL server, when
no-check-ssl option is set, the check is still performed using a SSL
configuration.
To fix the bug, instead of a boolean value (0=TCP, 1=SSL), we use a ternary value :
* 0 = use server config
* 1 = force SSL
* -1 = force non-SSL
The same is done for the server parameter. It is not really necessary for
now. But it is a good way to know is the server no-ssl option is set.
In addition, the PR_O_TCPCHK_SSL proxy option is no longer used to set use_ssl
to 1 for a check. Instead the flag is directly tested to prepare or destroy the
server SSL context.
This patch should be backported as far as 1.8.
The 'http-check send' directive have been added to add headers and optionnaly a
payload to the request sent during HTTP healthchecks. The request line may be
customized by the "option httpchk" directive but there was not official way to
add extra headers. An old trick consisted to hide these headers at the end of
the version string, on the "option httpchk" line. And it was impossible to add
an extra payload with an "http-check expect" directive because of the
"Connection: close" header appended to the request (See issue #16 for details).
So to make things official and fully support payload additions, the "http-check
send" directive have been added :
option httpchk POST /status HTTP/1.1
http-check send hdr Content-Type "application/json;charset=UTF-8" \
hdr X-test-1 value1 hdr X-test-2 value2 \
body "{id: 1, field: \"value\"}"
When a payload is defined, the Content-Length header is automatically added. So
chunk-encoded requests are not supported yet. For now, there is no special
validity checks on the extra headers.
This patch is inspired by Kiran Gavali's work. It should fix the issue #16 and
as far as possible, it may be backported, at least as far as 1.8.
list_for_each_entry_rev() and list_for_each_entry_from_rev() and corresponding
safe versions have been added to iterate on a list in the reverse order. All
these functions work the same way than the forward versions, except they use the
.p field to move for an element to another.
Server address and port may change at runtime. So the address and port passed as
arguments and as environment variables when an external check is executed must
be updated. The current number of connections on the server was already updated
before executing the command. So the same mechanism is used for the server
address and port. But in addition, command arguments are also updated.
This patch must be backported to all stable versions. It should fix the
issue #577.
The url_decode() function used by the url_dec converter and a few other
call points is ambiguous on its processing of the '+' character which
itself isn't stable in the spec. This one belongs to the reserved
characters for the query string but not for the path nor the scheme,
in which it must be left as-is. It's only in argument strings that
follow the application/x-www-form-urlencoded encoding that it must be
turned into a space, that is, in query strings and POST arguments.
The problem is that the function is used to process full URLs and
paths in various configs, and to process query strings from the stats
page for example.
This patch updates the function to differentiate the situation where
it's parsing a path and a query string. A new argument indicates if a
query string should be assumed, otherwise it's only assumed after seeing
a question mark.
The various locations in the code making use of this function were
updated to take care of this (most call places were using it to decode
POST arguments).
The url_dec converter is usually called on path or url samples, so it
needs to remain compatible with this and will default to parsing a path
and turning the '+' to a space only after a question mark. However in
situations where it would explicitly be extracted from a POST or a
query string, it now becomes possible to enforce the decoding by passing
a non-null value in argument.
It seems to be what was reported in issue #585. This fix may be
backported to older stable releases.
As reported in issue #596, the edx register isn't marked as clobbered
in div64_32(), which could technically allow gcc to try to reuse it
if it needed a copy of the 32 highest bits of the o1 register after
the operation.
Two attempts were tried, one using a dummy 32-bit local variable to
store the intermediary edx and another one switching to "=A" and making
result a long long. It turns out the former makes the resulting object
code significantly dirtier while the latter makes it better and was
kept. This is due to gcc's difficulties at working with register pairs
mixing 32- and 64- bit values on i386. It was verified that no code
change happened at all on x86_64, armv7, aarch64 nor mips32.
In practice it's only used by the frequency counters so this bug
cannot even be triggered but better fix it.
This may be backported to stable branches though it will not fix any
issue.
If haproxy fails to start and emits an alert, then it can be useful
to have it also emit the version and the path used to load it. Some
users may be mistakenly launching the wrong binary due to a misconfigured
PATH variable and this will save them some troubleshooting time when it
reports that some keywords are not understood.
What we do here is that we *try* to extract the binary name from the
AUX vector on glibc, and we report this as a NOTICE tag before the
very first alert is emitted.
Since some systems switched to service managers which hide all warnings
by default, some users are not aware of some possibly important warnings
and get caught too late with errors that could have been detected earlier.
This patch adds a new global keyword, "zero-warning" and an equivalent
command-line option "-dW" to refuse to start in case any warning is
detected. It is recommended to use these with configurations that are
managed by humans in order to catch mistakes very early.
This helps quickly checking if the config produces any warning. For
this we reuse the "warned" bit field to add a new WARN_ANY bit that is
set by ha_warning(). The rest of the bit field was also cleaned from
unused bits.
Before supporting "server" line in "peers" section, such sections without
any local peer were removed from the configuration to get it validated.
This patch fixes the issue where a "server" line without address and port which
is a remote peer without address and port makes the configuration parsing fail.
When encoutering such cases we now ignore such lines remove them from the
configuration.
Thank you to Jrme Magnin for having reported this bug.
Must be backported to 2.1 and 2.0.
In 'commit ssl cert', instead of trying to regenerate a list of filters
from the SNIs, use the list provided by the crtlist_entry used to
generate the ckch_inst.
This list of filters doesn't need to be free'd anymore since they are
always reused from the crtlist_entry.
Use the refcount of the SSL_CTX' to free them instead of freeing them on
certains conditions. That way we can free the SSL_CTX everywhere its
pointer is used.
The dump and show ssl crt-list commands does the same thing, they dump
the content of a crt-list, but the 'show' displays an ID in the first
column. Delete the 'dump' command so it is replaced by the 'show' one.
The old 'show' command is replaced by an '-n' option to dump the ID.
And the ID which was a pointer is replaced by a line number and placed
after colons in the filename.
Example:
$ echo "show ssl crt-list -n kikyo.crt-list" | socat /tmp/sock1 -
# kikyo.crt-list
kikyo.pem.rsa:1 secure.domain.tld
kikyo.pem.ecdsa:2 secure.domain.tld
This patch fixes a bad stop condition when decoding a protocol buffer variable integer
whose maximum lenghts are 10, shifting a uint64_t value by more than 63.
Thank you to Ilya for having reported this issue.
Must be backported to 2.1 and 2.0.
When updating a ckch_store we may want to update its pointer in the
crtlist_entry which use it. To do this, we need the list of the entries
using the store.
The instances were wrongly inserted in the crtlist entries, all
instances of a crt-list were inserted in the last crt-list entry.
Which was kind of handy to free all instances upon error.
Now that it's done correctly, the error path was changed, it must
iterate on the entries and find the ckch_insts which were generated for
this bind_conf. To avoid wasting time, it stops the iteration once it
found the first unsuccessful generation.
In order to be able to add new certificate in a crt-list, we need the
list of bind_conf that uses this crt-list so we can create a ckch_inst
for each of them.
Add a counter to know the current number of used connections, as well as the
max, this will be used later to refine the algorithm used to kill idle
connections, based on current usage.
With server-template was introduced the possibility to scale the
number of servers in a backend without needing a configuration change
and associated reload. On the other hand it became impractical to
write use-server rules for these servers as they would only accept
existing server labels as argument. This patch allows the use of
log-format notation to describe targets of a use-server rules, such
as in the example below:
listen test
bind *:1234
use-server %[hdr(srv)] if { hdr(srv) -m found }
use-server s1 if { path / }
server s1 127.0.0.1:18080
server s2 127.0.0.1:18081
If a use-server rule is applied because it was conditionned by an
ACL returning true, but the target of the use-server rule cannot be
resolved, no other use-server rule is evaluated and we fall back to
load balancing.
This feature was requested on the ML, and bumped with issue #563.
In srv_add_to_idle_list(), make sure we set the idle_time before we add
the connection to an idle list, not after, otherwise another thread may
grab it, set the idle_time to 0, only to have the original thread set it
back to now_ms.
This may have an impact, as in conn_free() we check idle_time to decide
if we should decrement the idle connection counters for the server.
In connect_server(), if we no longer have any idle connections for the
current thread, attempt to use the new "takeover" mux method to steal a
connection from another thread.
This should have no impact right now, given no mux implements it.
Make the "list" element a struct mt_list, and explicitely use
list_from_mt_list to get a struct list * where it is used as such, so that
mt_list_for_each_entry will be usable with it.
Add a new mux method, "takeover", that will attempt to make the current thread
responsible for the connection.
It should return 0 on success, and non-zero on failure.
Implement a new function, fd_takeover(), that lets you become the thread
responsible for the fd. On architectures that do not have a double-width CAS,
use a global rwlock.
fd_set_running() was also changed to be able to compete with fd_takeover(),
either using a dooble-width CAS on both running_mask and thread_mask, or
by claiming a reader on the global rwlock. This extra operation should not
have any measurable impact on modern architectures where threading is
relevant.
Revamp the server connection lists. We know have 3 lists :
- idle_conns, which contains idling connections
- safe_conns, which contains idling connections that are safe to use even
for the first request
- available_conns, which contains connections that are not idling, but can
still accept new streams (those are HTTP/2 or fastcgi, and are always
considered safe).
Make it so sessions are not responsible for connection anymore, except for
connections that are private, and thus can't be shared, otherwise, as soon
as a request is done, the session will just add the connection to the
orphan connections pool.
This will break http-reuse safe, but it is expected to be fixed later.
The flush_lock was introduced, mostly to be sure that pool_gc() will never
dereference a pointer that has been free'd. __pool_get_first() was acquiring
the lock to, the fear was that otherwise that pointer could get free'd later,
and then pool_gc() would attempt to dereference it. However, that can not
happen, because the only functions that can free a pointer, when using
lockless pools, are pool_gc() and pool_flush(), and as long as those two
are mutually exclusive, nobody will be able to free the pointer while
pool_gc() attempts to access it.
So change the flush_lock to a spinlock, and don't bother acquire/release
it in __pool_get_first(), that way callers of __pool_get_first() won't have
to wait while the pool is flushed. The worst that can happen is we call
__pool_refill_alloc() while the pool is getting flushed, and memory can
get allocated just to be free'd.
This may help with github issue #552
This may be backported to 2.1, 2.0 and 1.9.
Move the definition of WDTSIG and DEBUGSIG from wdt.c and debug.c into
types/signal.h, so that we can access them in another file.
We need those definition to avoid blocking those signals when running
__signal_process_queue().
This should be backported to 2.1, 2.0 and 1.9.
In the struct fdtab, introduce a new mask, running_mask. Each thread should
add its bit before using the fd.
Use the running_mask instead of a lock, in fd_insert/fd_delete, we'll just
spin as long as the mask is non-zero, to be sure we access the data
exclusively.
fd_set_running_excl() spins until the mask is 0, fd_set_running() just
adds the thread bit, and fd_clr_running() removes it.
The crtlist structure defines a crt-list in the HAProxy configuration.
It contains crtlist_entry structures which are the lines in a crt-list
file.
crt-list are now loaded in memory using crtlist and crtlist_entry
structures. The file is read only once. The generation algorithm changed
a little bit, new ckch instances are generated from the crtlist
structures, instead of being generated during the file loading.
The loading function was split in two, one that loads and caches the
crt-list and certificates, and one that looks for a crt-list and creates
the ckch instances.
Filters are also stored in crtlist_entry->filters as a char ** so we can
generate the sni_ctx again if needed. I won't be needed anymore to parse
the sni_ctx to do that.
A crtlist_entry stores the list of all ckch_inst that were generated
from this entry.
With these debug options we still get these warnings:
include/common/memory.h:501:23: warning: null pointer dereference [-Wnull-dereference]
*(volatile int *)0 = 0;
~~~~~~~~~~~~~~~~~~~^~~
include/common/memory.h:460:22: warning: null pointer dereference [-Wnull-dereference]
*(volatile int *)0 = 0;
~~~~~~~~~~~~~~~~~~~^~~
These are purposely there to crash the process at specific locations.
But the annoying warnings do not help with debugging and they are not
even reliable as the compiler may decide to optimize them away. Let's
pass the pointer through DISGUISE() to avoid this.
It's more generic and versatile than the previous shut_your_big_mouth_gcc()
that was used to silence annoying warnings as it's not limited to ignoring
syscalls returns only. This allows us to get rid of the aforementioned
function and the shut_your_big_mouth_gcc_int variable, that started to
look ugly in multi-threaded environments.
Tim reported that BUG_ON() issues warnings on his distro, as the libc marks
some syscalls with __attribute__((warn_unused_result)). Let's pass the
write() result through DISGUISE() to hide it.
This does exactly the same as ALREADY_CHECKED() but does it inline,
returning an identical copy of the scalar variable without letting
the compiler know how it might have been transformed. This can
forcefully disable certain null-pointer checks or result checks when
known undesirable. Typically forcing a crash with *(DISGUISE(NULL))=0
will not cause a null-deref warning.
These are mostly comments in the code. A few error messages were fixed
and are of low enough importance not to deserve a backport. Some regtests
were also fixed.
This patch adds the `unique-id` option to `proxy-v2-options`. If this
option is set a unique ID will be generated based on the `unique-id-format`
while sending the proxy protocol v2 header and stored as the unique id for
the first stream of the connection.
This feature is meant to be used in `tcp` mode. It works on HTTP mode, but
might result in inconsistent unique IDs for the first request on a keep-alive
connection, because the unique ID for the first stream is generated earlier
than the others.
Now that we can send unique IDs in `tcp` mode the `%ID` log variable is made
available in TCP mode.
Remove the list of private connections from server, it has been largely
unused, we only inserted connections in it, but we would never actually
use it.
Implement mt_list_to_list() and list_to_mt_list(), to be able to convert
from a struct list to a struct mt_list, and vice versa.
This is normally of no use, except for struct connection's list field, that
can go in either a struct list or a struct mt_list.
The stream-int code doesn't need to load server.h as it doesn't use
servers at all. However removing this one reveals that proxy.h was
lacking types/checks.h that used to be silently inherited from
types/server.h loaded before in stream_interface.h.
Ryan O'Hara reported that haproxy breaks on fedora-32 using gcc-10
(pre-release). It turns out that constructs such as:
while (item != head) {
item = LIST_ELEM(item.n);
}
loop forever, never matching <item> to <head> despite a printf there
showing them equal. In practice the problem is that the LIST_ELEM()
macro is wrong, it assigns the subtract of two pointers (an integer)
to another pointer through a cast to its pointer type. And GCC 10 now
considers that this cannot match a pointer and silently optimizes the
comparison away. A tested workaround for this is to build with
-fno-tree-pta. Note that older gcc versions even with -ftree-pta do
not exhibit this rather surprizing behavior.
This patch changes the test to instead cast the null-based address to
an int to get the offset and subtract it from the pointer, and this
time it works. There were just a few places to adjust. Ideally
offsetof() should be used but the LIST_ELEM() API doesn't make this
trivial as it's commonly called with a typeof(ptr) and not typeof(ptr*)
thus it would require to completely change the whole API, which is not
something workable in the short term, especially for a backport.
With this change, the emitted code is subtly different even on older
versions. A code size reduction of ~600 bytes and a total executable
size reduction of ~1kB are expected to be observed and should not be
taken as an anomaly. Typically this loop in dequeue_proxy_listeners() :
while ((listener = MT_LIST_POP(...)))
used to produce this code where the comparison is performed on RAX
while the new offset is assigned to RDI even though both are always
identical:
53ded8: 48 8d 78 c0 lea -0x40(%rax),%rdi
53dedc: 48 83 f8 40 cmp $0x40,%rax
53dee0: 74 39 je 53df1b <dequeue_proxy_listeners+0xab>
and now produces this one which is slightly more efficient as the
same register is used for both purposes:
53dd08: 48 83 ef 40 sub $0x40,%rdi
53dd0c: 74 2d je 53dd3b <dequeue_proxy_listeners+0x9b>
Similarly, retrieving the channel from a stream_interface using si_ic()
and si_oc() used to cause this (stream-int in rdi):
1cb7: c7 47 1c 00 02 00 00 movl $0x200,0x1c(%rdi)
1cbe: f6 47 04 10 testb $0x10,0x4(%rdi)
1cc2: 74 1c je 1ce0 <si_report_error+0x30>
1cc4: 48 81 ef 00 03 00 00 sub $0x300,%rdi
1ccb: 81 4f 10 00 08 00 00 orl $0x800,0x10(%rdi)
and now causes this:
1cb7: c7 47 1c 00 02 00 00 movl $0x200,0x1c(%rdi)
1cbe: f6 47 04 10 testb $0x10,0x4(%rdi)
1cc2: 74 1c je 1ce0 <si_report_error+0x30>
1cc4: 81 8f 10 fd ff ff 00 orl $0x800,-0x2f0(%rdi)
There is extremely little chance that this fix wakes up a dormant bug as
the emitted code effectively does what the source code intends.
This must be backported to all supported branches (dropping MT_LIST_ELEM
and the spoa_example parts as needed), since the bug is subtle and may
not always be visible even when compiling with gcc-10.
In MT_LIST_DEL_SAFE(), when the code was changed to use a temporary variable
instead of using the provided pointer directly, we shouldn't have changed
the code that set the pointer to NULL, as we really want the pointer
provided to be nullified, otherwise other parts of the code won't know
we just deleted an element, and bad things will happen.
This should be backported to 2.1.
The splice() syscall has been supported in glibc since version 2.5 issued
in 2006 and is present on supported systems so there's no need for having
our own arch-specific syscall definitions anymore.
This was made to support epoll on patched 2.4 kernels, and on early 2.6
using alternative libcs thanks to the arch-specific syscall definitions.
All the features we support have been around since 2.6.2 and present in
glibc since 2.3.2, neither of which are found in field anymore. Let's
simply drop this and use epoll normally.
The accept4() syscall has been present for a while now, there is no more
reason for maintaining our own arch-specific syscall implementation for
systems lacking it in libc but having it in the kernel.
This was introduced 10 years ago to squeeze a few CPU cycles per syscall
on 32-bit x86 machines and was already quite old by then, requiring to
explicitly enable support for this in the kernel. We don't even know if
it still builds, let alone if it works at all on recent kernels! Let's
completely drop this now.
Since commit 244b070 ("MINOR: ssl/cli: support crt-list filters"),
HAProxy generates a list of filters based on the sni_ctx in memory.
However it's not always relevant, sometimes no filters were configured
and the CN/SAN in the new certificate are not the same.
This patch fixes the issue by using a flag filters in the ckch_inst, so
we are able to know if there were filters or not. In the late case it
uses the CN/SAN of the new certificate to generate the sni_ctx.
note: filters are still only used in the crt-list atm.
We currently have two UUID generation functions, one for the sample
fetch and the other one in the SPOE filter. Both were a bit complicated
since they were made to support random() implementations returning an
arbitrary number of bits, and were throwing away 33 bits every 64. Now
we don't need this anymore, so let's have a generic function consuming
64 bits at once and use it as appropriate.
This is the replacement of failed attempt to add thread safety and
per-process sequences of random numbers initally tried with commit
1c306aa84d ("BUG/MEDIUM: random: implement per-thread and per-process
random sequences").
This new version takes a completely different approach and doesn't try
to work around the horrible OS-specific and non-portable random API
anymore. Instead it implements "xoroshiro128**", a reputedly high
quality random number generator, which is one of the many variants of
xorshift, which passes all quality tests and which is described here:
http://prng.di.unimi.it/
While not cryptographically secure, it is fast and features a 2^128-1
period. It supports fast jumps allowing to cut the period into smaller
non-overlapping sequences, which we use here to support up to 2^32
processes each having their own, non-overlapping sequence of 2^96
numbers (~7*10^28). This is enough to provide 1 billion randoms per
second and per process for 2200 billion years.
The implementation was made thread-safe either by using a double 64-bit
CAS on platforms supporting it (x86_64, aarch64) or by using a local
lock for the time needed to perform the shift operations. This ensures
that all threads pick numbers from the same pool so that it is not
needed to assign per-thread ranges. For processes we use the fast jump
method to advance the sequence by 2^96 for each process.
Before this patch, the following config:
global
nbproc 8
frontend f
bind :4445
mode http
log stdout format raw daemon
log-format "%[uuid] %pid"
redirect location /
Would produce this output:
a4d0ad64-2645-4b74-b894-48acce0669af 12987
a4d0ad64-2645-4b74-b894-48acce0669af 12992
a4d0ad64-2645-4b74-b894-48acce0669af 12986
a4d0ad64-2645-4b74-b894-48acce0669af 12988
a4d0ad64-2645-4b74-b894-48acce0669af 12991
a4d0ad64-2645-4b74-b894-48acce0669af 12989
a4d0ad64-2645-4b74-b894-48acce0669af 12990
82d5f6cd-f6c1-4f85-a89c-36ae85d26fb9 12987
82d5f6cd-f6c1-4f85-a89c-36ae85d26fb9 12992
82d5f6cd-f6c1-4f85-a89c-36ae85d26fb9 12986
(...)
And now produces:
f94b29b3-da74-4e03-a0c5-a532c635bad9 13011
47470c02-4862-4c33-80e7-a952899570e5 13014
86332123-539a-47bf-853f-8c8ea8b2a2b5 13013
8f9efa99-3143-47b2-83cf-d618c8dea711 13012
3cc0f5c7-d790-496b-8d39-bec77647af5b 13015
3ec64915-8f95-4374-9e66-e777dc8791e0 13009
0f9bf894-dcde-408c-b094-6e0bb3255452 13011
49c7bfde-3ffb-40e9-9a8d-8084d650ed8f 13014
e23f6f2e-35c5-4433-a294-b790ab902653 13012
There are multiple benefits to using this method. First, it doesn't
depend anymore on a non-portable API. Second it's thread safe. Third it
is fast and more proven than any hack we could attempt to try to work
around the deficiencies of the various implementations around.
This commit depends on previous patches "MINOR: tools: add 64-bit rotate
operators" and "BUG/MEDIUM: random: initialize the random pool a bit
better", all of which will need to be backported at least as far as
version 2.0. It doesn't require to backport the build fixes for circular
include files dependecy anymore.
This reverts commit 1c306aa84d.
It breaks the build on all non-glibc platforms. I got confused by the
man page (which possibly is the most confusing man page I've ever read
about a standard libc function) and mistakenly understood that random_r
was portable, especially since it appears in latest freebsd source as
well but not in released versions, and with a slightly different API :-/
We need to find a different solution with a fallback. Among the
possibilities, we may reintroduce this one with a fallback relying on
locking around the standard functions, keeping fingers crossed for no
other library function to call them in parallel, or we may also provide
our own PRNG, which is not necessarily more difficult than working
around the totally broken up design of the portable API.
As mentioned in previous patch, the random number generator was never
made thread-safe, which used not to be a problem for health checks
spreading, until the uuid sample fetch function appeared. Currently
it is possible for two threads or processes to produce exactly the
same UUID. In fact it's extremely likely that this will happen for
processes, as can be seen with this config:
global
nbproc 8
frontend f
bind :4445
mode http
log stdout daemon format raw
log-format "%[uuid] %pid"
redirect location /
It typically produces this log:
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30645
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30641
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30644
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30639
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30646
07764439-c24d-4e6f-a5a6-0138be59e7a8 30645
07764439-c24d-4e6f-a5a6-0138be59e7a8 30639
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30643
07764439-c24d-4e6f-a5a6-0138be59e7a8 30646
b6773fdd-678f-4d04-96f2-4fb11ad15d6b 30646
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30642
07764439-c24d-4e6f-a5a6-0138be59e7a8 30642
What this patch does is to use a distinct per-thread and per-process
seed to make sure the same sequences will not appear, and will then
extend these seeds by "burning" a number of randoms that depends on
the global random seed, the thread ID and the process ID. This adds
roughly 20 extra bits of randomness, resulting in 52 bits total per
thread and per process.
It only takes a few milliseconds to burn these randoms and given
that threads start with a different seed, we know they will not
catch each other. So these random extra bits are essentially added
to ensure randomness between boots and cluster instances.
This replaces all uses of random() with ha_random() which uses the
thread-local state.
This must be backported as far as 2.0 or any version having the
UUID sample-fetch function since it's the main victim here.
It's important to note that this patch, in addition to depending on
the previous one "BUG/MEDIUM: init: initialize the random pool a bit
better", also depends on the preceeding build fixes to address a
circular dependency issue in the include files that prevented it
from building. Part or all of these patches may need to be backported
or adapted as well.
Since the UUID sample fetch was created, some people noticed that in
certain virtualized environments they manage to get exact same UUIDs
on different instances started exactly at the same moment. It turns
out that the randoms were only initialized to spread the health checks
originally, not to provide "clean" randoms.
This patch changes this and collects more randomness from various
sources, including existing randoms, /dev/urandom when available,
RAND_bytes() when OpenSSL is available, as well as the timing for such
operations, then applies a SHA1 on all this to keep a 160 bits random
seed available, 32 of which are passed to srandom().
It's worth mentioning that there's no clean way to pass more than 32
bits to srandom() as even initstate() provides an opaque state that
must absolutely not be tampered with since known implementations
contain state information.
At least this allows to have up to 4 billion different sequences
from the boot, which is not that bad.
Note that the thread safety was still not addressed, which is another
issue for another patch.
This must be backported to all versions containing the UUID sample
fetch function, i.e. as far as 2.0.
buffer.h relies on proto/activity because it contains some code and not
just type definitions. It must not be included from types files. It
should probably also be split in two if it starts to include a proto.
This causes some circular dependencies at other places.
This flag was used in some internal functions to be sure the current stream is
able to handle HTTP content. It was introduced when the legacy HTTP code was
still there. Now, It is possible to rely on stream's flags to be sure we have an
HTX stream.
So the flag HLUA_TXN_HTTP_RDY can be removed. Everywhere it was tested, it is
replaced by a call to the IS_HTX_STRM() macro.
This patch is mandatory to allow the support of the filters written in lua.
The htx_find_offset() function may be used to look for a block at a specific
offset in an HTX message, starting from the message head. A compound result is
returned, an htx_ret structure, with the found block and the position of the
offset in the block. If the offset is ouside of the HTX message, the returned
block is NULL.
The b_insert_blk() function may now be used to insert a string, given a pointer
and the string length, at an absolute offset in a buffer, moving data between
this offset and the buffer's tail just after the end of the inserted string. The
buffer's length is automatically updated. This function supports wrapping. All
the string is copied or nothing. So it returns 0 if there are not enough space
to perform the copy. Otherwise, the number of bytes copied is returned.
pattern_finalize_config() uses an inefficient algorithm which is a
problem with very large configuration files. This affects startup, and
therefore reload time. When haproxy is deployed as a router in a
Kubernetes cluster the generated configuration file may be large and
reloads are frequently occuring, which makes this a significant issue.
The old algorithm is O(n^2)
* allocate missing uids - O(n^2)
* sort linked list - O(n^2)
The new algorithm is O(n log n):
* find the user allocated uids - O(n)
* store them for efficient lookup - O(n log n)
* allocate missing uids - n times O(log n)
* sort all uids - O(n log n)
* convert back to linked list - O(n)
Performance examples, startup time in seconds:
pat_refs old new
1000 0.02 0.01
10000 2.1 0.04
20000 12.3 0.07
30000 27.9 0.10
40000 52.5 0.14
50000 77.5 0.17
Please backport to 1.8, 2.0 and 2.1.
`istalloc` allocates memory and returns an `ist` with the size `0` that points
to this allocation.
`istfree` frees the pointed memory and clears the pointer.
It was only possible to go down from the ckch_store to the sni_ctx but
not to go up from the sni_ctx to the ckch_store.
To allow that, 2 pointers were added:
- a ckch_inst pointer in the struct sni_ctx
- a ckckh_store pointer in the struct ckch_inst
Generate a list of the previous filters when updating a certificate
which use filters in crt-list. Then pass this list to the function
generating the sni_ctx during the commit.
This feature allows the update of the crt-list certificates which uses
the filters with "set ssl cert".
This function could be probably replaced by creating a new
ckch_inst_new_load_store() function which take the previous sni_ctx list as
an argument instead of the char **sni_filter, avoiding the
allocation/copy during runtime for each filter. But since are still
handling the multi-cert bundles, it's better this way to avoid code
duplication.
A test on FreeBSD with clang 4 to 8 produces this on a call to a
spinning loop on the CLI:
call trace(5):
| 0x53e2bc [eb 16 48 63 c3 48 c1 e0]: wdt_handler+0x10c
| 0x800e02cfe [e8 5d 83 00 00 8b 18 8b]: libthr:pthread_sigmask+0x53e
with our own function it correctly produces this:
call trace(20):
| 0x53e2dc [eb 16 48 63 c3 48 c1 e0]: wdt_handler+0x10c
| 0x800e02cfe [e8 5d 83 00 00 8b 18 8b]: libthr:pthread_sigmask+0x53e
| 0x800e022bf [48 83 c4 38 5b 41 5c 41]: libthr:pthread_getspecific+0xdef
| 0x7ffffffff003 [48 8d 7c 24 10 6a 00 48]: main+0x7fffffb416f3
| 0x801373809 [85 c0 0f 84 6f ff ff ff]: libc:__sys_gettimeofday+0x199
| 0x801373709 [89 c3 85 c0 75 a6 48 8b]: libc:__sys_gettimeofday+0x99
| 0x801371c62 [83 f8 4e 75 0f 48 89 df]: libc:gettimeofday+0x12
| 0x51fa0a [48 89 df 4c 89 f6 e8 6b]: ha_thread_dump_all_to_trash+0x49a
| 0x4b723b [85 c0 75 09 49 8b 04 24]: mworker_cli_sockpair_new+0xd9b
| 0x4b6c68 [85 c0 75 08 4c 89 ef e8]: mworker_cli_sockpair_new+0x7c8
| 0x532f81 [4c 89 e7 48 83 ef 80 41]: task_run_applet+0xe1
So let's add clang+x86_64 to the list of platforms that will use our
simplified version. As a bonus it will not require to link with
-lexecinfo on FreeBSD and will work out of the box when passing
USE_BACKTRACE=1.
It happens that on aarch64 backtrace() only returns one entry (tested
with gcc 4.7.4, 5.5.0 and 7.4.1). Probably that it refrains from unwinding
the stack due to the risk of hitting a bad pointer. Here we can use
may_access() to know when it's safe, so we can actually unwind the stack
without taking risks. It happens that the faulting function (the one
just after the signal handler) is not listed here, very likely because
the signal handler uses a special stack and did not create a new frame.
So this patch creates a new my_backtrace() function in standard.h that
either calls backtrace() or does its own unrolling. The choice depends
on HA_HAVE_WORKING_BACKTRACE which is set in compat.h based on the build
target.
It's only available for bind line. "ca-verify-file" allows to separate
CA certificates from "ca-file". CA names sent in server hello message is
only compute from "ca-file". Typically, "ca-file" must be defined with
intermediate certificates and "ca-verify-file" with certificates to
ending the chain, like root CA.
Fix issue #404.
We use various hacks at a few places to try to identify known function
pointers in debugging outputs (show threads & show fd). Let's centralize
this into a new function dedicated to this. It already knows about the
functions matched by "show threads" and "show fd", and when built with
USE_DL, it can rely on dladdr1() to resolve other functions. There are
some limitations, as static functions are not resolved, linking with
-rdynamic is mandatory, and even then some functions will not necessarily
appear. It's possible to do a better job by rebuilding the whole symbol
table from the ELF headers in memory but it's less portable and the gains
are still limited, so this solution remains a reasonable tradeoff.
This function dumps <n> bytes from <addr> in hex form into buffer <buf>
enclosed in brackets after the address itself, formatted on 14 chars
including the "0x" prefix. This is meant to be used as a prefix for code
areas. For example: "0x7f10b6557690 [48 c7 c0 0f 00 00 00 0f]: "
It relies on may_access() to know if the bytes are dumpable, otherwise "--"
is emitted. An optional prefix is supported.
We always set them both, which makes sense since errors at the FD level
indicate a terminal condition for the socket that cannot be recovered.
Usually this is detected via a write error, but sometimes such an error
may asynchronously be reported on the read side. Let's simplify this
using only the write bit and calling it RW since it's used like this
everywhere, and leave the R bit spare for future use.
There's no point in trying to be too generic for these flags as the
read and write sides will soon differ a bit. Better explicitly define
the flags for each direction without trying to be direction-agnostic.
this clarifies the code and removes some defines.
This was used only by fd_recv_state() and fd_send_state(), both of
which are unused. This will not work anymore once recv and send flags
start to differ, so let's remove this.
commit c87e46881 ("MINOR: http-rules: Add a flag on redirect rules to know the
rule direction") introduced a new flag for redirect rules, but its value has
bits in common with REDIRECT_FLAG_DROP_QS, which makes us enter this code path
in http_apply_redirect_rule(), which will then drop the query string.
To fix this, just give REDIRECT_FLAG_FROM_REQ its own unique value.
This must be backported where c87e468816 is backported.
This should fix issue 521.
This lock was only needed to protect the buffer_wq list, but now we have
the mt_list for this. This patch simply turns the buffer_wq list to an
mt_list and gets rid of the lock.
It's worth noting that the whole buffer_wait thing still looks totally
wrong especially in a threaded context: the wakeup_cb() callback is
called synchronously from any thread and may end up calling some
connection code that was not expected to run on a given thread. The
whole thing should probably be reworked to use tasklets instead and be
a bit more centralized.
Move the cert_issuer_tree outside the global_ssl structure since it's
not a configuration variable. And move the declaration of the
issuer_chain structure in types/ssl_sock.h
This commit adds ALWAYS_ALIGN(), MAYBE_ALIGN() and ATOMIC_ALIGN() to
be placed as delimitors inside structures to force alignment to a
given size. These depend on the architecture's capabilities so that
it is possible to always align, align only on archs not supporting
unaligned accesses at all, or only on those not supporting them for
atomic accesses (e.g. before a lock).
The isalnum(), isalpha(), isdigit() etc functions from ctype.h are
supposed to take an int in argument which must either reflect an
unsigned char or EOF. In practice on some platforms they're implemented
as macros referencing an array, and when passed a char, they either cause
a warning "array subscript has type 'char'" when lucky, or cause random
segfaults when unlucky. It's quite unconvenient by the way since none of
them may return true for negative values. The recent introduction of
cygwin to the list of regularly tested build platforms revealed a lot
of breakage there due to the same issues again.
So this patch addresses the problem all over the code at once. It adds
unsigned char casts to every valid use case, and also drops the unneeded
double cast to int that was sometimes added on top of it.
It may be backported by dropping irrelevant changes if that helps better
support uncommon platforms. It's unlikely to fix bugs on platforms which
would already not emit any warning though.
This used to be a minor optimization on ix86 where registers are scarce
and the calling convention not very efficient, but this platform is not
relevant enough anymore to warrant all this dirt in the code for the sake
of saving 1 or 2% of performance. Modern platforms don't use this at all
since their calling convention already defaults to using several registers
so better get rid of this once for all.
This patch turns the double negation of 'not unlikely' into 'likely'
and then turns the negation of 'not smaller' into 'greater or equal'
in an attempt to improve readability of the condition.
[wt: this was not a bug but purposely written like this to improve code
generation on older compilers but not needed anymore as described here:
https://www.mail-archive.com/haproxy@formilux.org/msg36392.html ]
Move the `!` inside the likely and negate it to unlikely.
The previous version should not have caused issues, because it is converted
to a boolean / integral value before being passed to __builtin_expect(), but
it's certainly unusual.
[wt: this was not a bug but purposely written like this to improve code
generation on older compilers but not needed anymore as described here:
https://www.mail-archive.com/haproxy@formilux.org/msg36392.html ]
We used to special-case the likely()/unlikely() macros for a series of
early gcc 4.x compilers which used to produce very bad code when using
__builtin_expect(x,1), which basically used to build an integer (0 or 1)
from a condition then compare it to integer 1. This was already fixed in
5.x, but even now, looking at the code produced by various flavors of 4.x
this bad behavior couldn't be witnessed anymore. So let's consider it as
fixed by now, which will allow to get rid of some ugly tricks at some
specific places. A test on 4.7.4 shows that the code shrinks by about 3kB
now, thanks to some tests being inlined closer to the call place and the
unlikely case being moved to real functions. See the link below for more
background on this.
Link: https://www.mail-archive.com/haproxy@formilux.org/msg36392.html
These ones are irrelevant to the config but rather to the platform, and
as such are better placed in compiler.h.
Here we take the opportunity for declaring a few extra capabilities:
- HA_UNALIGNED : CPU supports unaligned accesses
- HA_UNALIGNED_LE : CPU supports unaligned accesses in little endian
- HA_UNALIGNED_FAST : CPU supports fast unaligned accesses
- HA_UNALIGNED_ATOMIC : CPU supports unaligned accesses in atomics
This will help remove a number of #ifdefs with arch-specific statements.
Add a function that finds a character in an ist and returns an
updated ist with the length of the portion of the original string
that doesn't contain the char.
Might be backported to 2.1
This flag is currently supported by raw_sock to perform a single recv()
attempt and avoid subscribing. Typically on the request and response
paths with keep-alive, with short messages we know that it's very likely
that the first message is enough.
This marks the end of the transition from the connection polling states
introduced in 1.5-dev12 and the subscriptions in that arrived in 1.9.
The socket layer can now safely use its FD while all upper layers rely
exclusively on subscriptions. These old functions were removed. Some may
deserve some renaming to improved clarty though. The single call to
conn_xprt_stop_both() was dropped in favor of conn_cond_update_polling()
which already does the same.
The last few calls to conn_xprt_{want,stop}_{recv,send} in the central
connection code were replaced with their strictly exact equivalent fd_*,
adding the call to conn_ctrl_ready() when it was missing.
Historically we used to require that the connections held the desired
polling states for the data layer and the socket layer. Then with muxes
these were more or less merged into the transport layer, and now it
happens that with all transport layers having their own state, the
"transport layer state" as we have it in the connection (XPRT_RD_ENA,
XPRT_WR_ENA) is only an exact copy of the undelying file descriptor
state, but with a delay. All of this is causing some difficulties at
many places in the code because there are still some locations which
use the conn_want_* API to remain clean and only rely on connection,
and count on a later collection call to conn_cond_update_polling(),
while others need an immediate action and directly use the FD updates.
Since our updates are now much cheaper, most of them being only an
atomic test-and-set operation, and since our I/O callbacks are deferred,
there's no benefit anymore in trying to "cache" the transient state
change in the connection flags hoping to cancel them before they
become an FD event. Better make such calls transparent indirections
to the FD layer instead and get rid of the deferred operations which
needlessly complicate the logic inside.
This removes flags CO_FL_XPRT_{RD,WR}_ENA and CO_FL_WILL_UPDATE.
A number of functions related to polling updates were either greatly
simplified or removed.
Two places were using CO_FL_XPRT_WR_ENA as a hint to know if more data
were expected to be sent after a PROXY protocol or SOCKSv4 header. These
ones were simply replaced with a check on the subscription which is
where we ought to get the autoritative information from.
Now the __conn_xprt_want_* and their conn_xprt_want_* counterparts
are the same. conn_stop_polling() and conn_xprt_stop_both() are the
same as well. conn_cond_update_polling() only causes errors to stop
polling. It also becomes way more obvious that muxes should not at
all employ conn_xprt_{want|stop}_{recv,send}(), and that the call
to __conn_xprt_stop_recv() in case a mux failed to allocate a buffer
is inappropriate, it ought to unsubscribe from reads instead. All of
this definitely requires a serious cleanup.
http_get_hdrs_size() function may now be used to get the bytes held by headers
in an HTX message. It only works if the headers were not already
forwarded. Metadata are not counted here.
The function is_idchar() was added by commit 36f586b ("MINOR: tools:
add is_idchar() to tell if a char may belong to an identifier") to
ease matching of sample fetch/converter names. But it lacked support
for the '+' character used in "base32+src" and "url32+src". A quick
way to figure the list of supported sample fetch+converter names is
to issue the following command:
git grep '"[^"]*",.*SMP_T_.*SMP_USE_'|cut -f2 -d'"'|sort -u
No more entry is reported once searching for characters not covered
by is_idchar().
No backport is needed.
When an end pointer is passed, instead of complaining that a comma is
missing after a keyword, sample_parse_expr() will silently return the
pointer to the current location into this return pointer so that the
caller can continue its parsing. This will be used by more complex
expressions which embed sample expressions, and may even permit to
embed sample expressions into arguments of other expressions.
The main problem we're having with argument parsing is that at the
moment the caller looks for the first character looking like an end
of arguments (')') and calls make_arg_list() on the sub-string inside
the parenthesis.
Let's first change the way it works so that make_arg_list() also
consumes the parenthesis and returns the pointer to the first char not
consumed. This will later permit to refine each argument parsing.
For now there is no functional change.
This does like chunk_strcpy() except that the maximum string length may
be limited by the caller. A trailing zero is always appended. This is
particularly handy to extract portions of strings to put into the trash
for use with libc functions requiring a nul-terminated string.
While looking for other occurrences of do { continue; } while (0) I
found these few leftovers in mini-clist where an outer loop was made
around "do { } while (0)" then another loop was placed inside just to
handle the continue. Let's clean this up by just removing the outer
one. Most of the patch is only the inner part of the loop that is
reindented. It was verified that the resulting code is the same.
When an action successfully finishes, the action return code (ACT_RET_*) is now
retrieve on the stack, ff the first element is an integer. In addition, in
hlua_txn_done(), the value ACT_RET_DONE is pushed on the stack before
exiting. Thus, when a script uses this function, the corresponding action still
finishes with the good code. Thanks to this change, the flag HLUA_STOP is now
useless. So it has been removed.
It is a mandatory step to allow a lua action to return any action return code.
It is not possible anymore to alter the HTTP parser state from lua sample
fetches or lua actions. So there is no reason to still check for the parser
state consistency.
It is now possible to append extra headers to the generated responses by HTTP
return actions, while it is not based on an errorfile. For return actions based
on errorfiles, these extra headers are ignored. To define an extra header, a
"hdr" argument must be used with a name and a value. The value is a log-format
string. For instance:
http-request status 200 hdr "x-src" "%[src]" hdr "x-dst" "%[dst]"
Thanks to this new action, it is now possible to return any responses from
HAProxy, with any status code, based on an errorfile, a file or a string. Unlike
the other internal messages generated by HAProxy, these ones are not interpreted
as errors. And it is not necessary to use a file containing a full HTTP
response, although it is still possible. In addition, using a log-format string
or a log-format file, it is possible to have responses with a dynamic
content. This action can be used on the request path or the response path. The
only constraint is to have a responses smaller than a buffer. And to avoid any
warning the buffer space reserved to the headers rewritting should also be free.
When a response is returned with a file or a string as payload, it only contains
the content-length header and the content-type header, if applicable. Here are
examples:
http-request return content-type image/x-icon file /var/www/favicon.ico \
if { path /favicon.ico }
http-request return status 403 content-type text/plain \
lf-string "Access denied. IP %[src] is blacklisted." \
if { src -f /etc/haproxy/blacklist.lst }
This patch introduces the 'http-after-response' rules. These rules are evaluated
at the end of the response analysis, just before the data forwarding, on ALL
HTTP responses, the server ones but also all responses generated by
HAProxy. Thanks to this ruleset, it is now possible for instance to add some
headers to the responses generated by the stats applet. Following actions are
supported :
* allow
* add-header
* del-header
* replace-header
* replace-value
* set-header
* set-status
* set-var
* strict-mode
* unset-var
Operations performed when internal responses (redirect/deny/auth/errors) are
returned are always the same. The http_forward_proxy_resp() function is added to
group all of them under a unique function.
The http_server_error() function now relies on http_reply_and_close(). Both do
almost the same actions. In addtion, http_server_error() sets the error flag and
the final state flag on the stream.
HTTP redirect rules can be evaluated on the request or the response path. So
when a redirect rule is evaluated, it is important to have this information
because some specific processing may be performed depending on the direction. So
the REDIRECT_FLAG_FROM_REQ flag has been added. It is set when applicable on the
redirect rule during the parsing.
This patch is mandatory to fix a bug on redirect rule. It must be backported to
all stable versions.
<.arg.dns.dns_opts> field in the act_rule structure is now dynamically allocated
when a do-resolve rule is parsed. This drastically reduces the structure size.
The channel_htx_copy_msg() function can now be used to copy an HTX message in a
channel's buffer. This function takes care to not overwrite existing data.
This patch depends on the commit "MINOR: htx: Add a function to append an HTX
message to another one". Both are mandatory to fix a bug in
http_reply_and_close() function. Be careful to backport both first.
the htx_append_msg() function can now be used to append an HTX message to
another one. All the message is copied or nothing. If an error occurs during the
copy, all changes are rolled back.
This patch is mandatory to fix a bug in http_reply_and_close() function. Be
careful to backport it first.
In __pool_get_first(), don't forget to unlock the pool lock if the pool is
empty, otherwise no writer will be able to take the lock, and as it is done
when reloading, it leads to an infinite loop on reload.
This should be backported with commit 04f5fe87d3
When using lockless pools, add a new rwlock, flush_pool. read-lock it when
getting memory from the pool, so that concurrenct access are still
authorized, but write-lock it when we're about to free memory, in
pool_flush() and pool_gc().
The problem is, when removing an item from the pool, we unreference it
to get the next one, however, that pointer may have been free'd in the
meanwhile, and that could provoke a crash if the pointer has been unmapped.
It should be OK to use a rwlock, as normal operations will still be able
to access the pool concurrently, and calls to pool_flush() and pool_gc()
should be pretty rare.
This should be backported to 2.1, 2.0 and 1.9.
Commit a17664d829 ("MEDIUM: tasks: automatically requeue into the bulk
queue an already running tasklet") tried to inflict a penalty to
self-requeuing tasks/tasklets which correspond to those involved in
large, high-latency data transfers, for the benefit of all other
processing which requires a low latency. However, it turns out that
while it ought to do this on a case-by-case basis, basing itself on
the RUNNING flag isn't accurate because this flag doesn't leave for
tasklets, so we'd rather need a distinct flag to tag such tasklets.
This commit introduces TASK_SELF_WAKING to mark tasklets acting like
this. For now it's still set when TASK_RUNNING is present but this
will have to change. The flag is kept across wakeups.
When a tasklet re-runs itself such as in this chain:
si_cs_io_cb -> si_cs_process -> si_notify -> si_chk_rcv
then we know it can easily clobber the run queue and harm latency. Now
what the scheduler does when it detects this is that such a tasklet is
automatically placed into the bulk list so that it's processed with the
remaining CPU bandwidth only. Thanks to this the CLI becomes instantly
responsive again even under heavy stress at 50 Gbps over 40kcon and
100% CPU on 16 threads.
We used to mix high latency tasks and low latency tasklets in the same
list, and to even refill bulk tasklets there, causing some unfairness
in certain situations (e.g. poll-less transfers between many connections
saturating the machine with similarly-sized in and out network interfaces).
This patch changes the mechanism to split the load into 3 lists depending
on the task/tasklet's desired classes :
- URGENT: this is mainly for tasklets used as deferred callbacks
- NORMAL: this is for regular tasks
- BULK: this is for bulk tasks/tasklets
Arbitrary ratios of max_processed are picked from each of these lists in
turn, with the ability to complete in one list from what was not picked
in the previous one. After some quick tests, the following setup gave
apparently good results both for raw TCP with splicing and for H2-to-H1
request rate:
- 0 to 75% for urgent
- 12 to 50% for normal
- 12 to what remains for bulk
Bulk is not used yet.
As mentioned in commit c192b0ab95 ("MEDIUM: connection: remove
CO_FL_CONNECTED and only rely on CO_FL_WAIT_*"), there is a lack of
consistency on which flags are checked among L4/L6/HANDSHAKE depending
on the code areas. A number of sample fetch functions only check for
L4L6 to report MAY_CHANGE, some places only check for HANDSHAKE and
many check both L4L6 and HANDSHAKE.
This patch starts to make all of this more consistent by introducing a
new mask CO_FL_WAIT_XPRT which is the union of L4/L6/HANDSHAKE and
reports whether the transport layer is ready or not.
All inconsistent call places were updated to rely on this one each time
the goal was to check for the readiness of the transport layer.
Most places continue to check CO_FL_HANDSHAKE while in fact they should
check CO_FL_HANDSHAKE_NOSSL, which contains all handshakes but the one
dedicated to SSL renegotiation. In fact the SSL layer should be the
only one checking CO_FL_SSL_WAIT_HS, so as to avoid processing data
when a renegotiation is in progress, but other ones randomly include it
without knowing. And ideally it should even be an internal flag that's
not exposed in the connection.
This patch takes CO_FL_SSL_WAIT_HS out of CO_FL_HANDSHAKE, uses this flag
consistently all over the code, and gets rid of CO_FL_HANDSHAKE_NOSSL.
In order to limit the confusion that has accumulated over time, the
CO_FL_SSL_WAIT_HS flag which indicates an ongoing SSL handshake,
possibly used by a renegotiation was moved after the other ones.
Commit 477902bd2e ("MEDIUM: connections: Get ride of the xprt_done
callback.") broke the master CLI for a very obscure reason. It happens
that short requests immediately terminated by a shutdown are properly
received, CS_FL_EOS is correctly set, but in si_cs_recv(), we refrain
from setting CF_SHUTR on the channel because CO_FL_CONNECTED was not
yet set on the connection since we've not passed again through
conn_fd_handler() and it was not done in conn_complete_session(). While
commit a8a415d31a ("BUG/MEDIUM: connections: Set CO_FL_CONNECTED in
conn_complete_session()") fixed the issue, such accident may happen
again as the root cause is deeper and actually comes down to the fact
that CO_FL_CONNECTED is lazily set at various check points in the code
but not every time we drop one wait bit. It is not the first time we
face this situation.
Originally this flag was used to detect the transition between WAIT_*
and CONNECTED in order to call ->wake() from the FD handler. But since
at least 1.8-dev1 with commit 7bf3fa3c23 ("BUG/MAJOR: connection: update
CO_FL_CONNECTED before calling the data layer"), CO_FL_CONNECTED is
always synchronized against the two others before being checked. Moreover,
with the I/Os moved to tasklets, the decision to call the ->wake() function
is performed after the I/Os in si_cs_process() and equivalent, which don't
care about this transition either.
So in essence, checking for CO_FL_CONNECTED has become a lazy wait to
check for (CO_FL_WAIT_L4_CONN | CO_FL_WAIT_L6_CONN), but that always
relies on someone else having synchronized it.
This patch addresses it once for all by killing this flag and only checking
the two others (for which a composite mask CO_FL_WAIT_L4L6 was added). This
revealed a number of inconsistencies that were purposely not addressed here
for the sake of bisectability:
- while most places do check both L4+L6 and HANDSHAKE at the same time,
some places like assign_server() or back_handle_st_con() and a few
sample fetches looking for proxy protocol do check for L4+L6 but
don't care about HANDSHAKE ; these ones will probably fail on TCP
request session rules if the handshake is not complete.
- some handshake handlers do validate that a connection is established
at L4 but didn't clear CO_FL_WAIT_L4_CONN
- the ->ctl method of mux_fcgi, mux_pt and mux_h1 only checks for L4+L6
before declaring the mux ready while the snd_buf function also checks
for the handshake's completion. Likely the former should validate the
handshake as well and we should get rid of these extra tests in snd_buf.
- raw_sock_from_buf() would directly set CO_FL_CONNECTED and would only
later clear CO_FL_WAIT_L4_CONN.
- xprt_handshake would set CO_FL_CONNECTED itself without actually
clearing CO_FL_WAIT_L4_CONN, which could apparently happen only if
waiting for a pure Rx handshake.
- most places in ssl_sock that were checking CO_FL_CONNECTED don't need
to include the L4 check as an L6 check is enough to decide whether to
wait for more info or not.
It also becomes obvious when reading the test in si_cs_recv() that caused
the failure mentioned above that once converted it doesn't make any sense
anymore: having CS_FL_EOS set while still waiting for L4 and L6 to complete
cannot happen since for CS_FL_EOS to be set, the other ones must have been
validated.
Some of these parts will still deserve further cleanup, and some of the
observations above may induce some backports of potential bug fixes once
totally analyzed in their context. The risk of breaking existing stuff
is too high to blindly backport everything.
The xprt_done_cb callback was used to defer some connection initialization
until we're connected and the handshake are done. As it mostly consists of
creating the mux, instead of using the callback, introduce a conn_create_mux()
function, that will just call conn_complete_session() for frontend, and
create the mux for backend.
In h2_wake(), make sure we call the wake method of the stream_interface,
as we no longer wakeup the stream task.
In connect_server(), when creating a new connection for which we don't yet
know the mux (because it'll be decided by the ALPN), instead of associating
the connection to the stream_interface, always create a conn_stream. This way,
we have less special-casing needed. Store the conn_stream in conn->ctx,
so that we can reach the upper layers if needed.
"set ssl cert <filename> <payload>" CLI command should have the same
result as reload HAproxy with the updated pem file (<filename>).
Is not the case, DHparams/cert-chain is kept from the previous
context if no DHparams/cert-chain is set in the context (<payload>).
This patch should be backport to 2.1
For complex stick tables with many entries/columns, it can be beneficial
to filter using multiple criteria. The maximum number of filter entries
can be controlled by defining STKTABLE_FILTER_LEN during build time.
This patch can be backported to older releases.
while working on issue #429, I encountered build failures with various
non-released openssl versions, let us improve ssl defines, switch to
features, not versions, for EVP_CTRL_AEAD_SET_IVLEN and
EVP_CTRL_AEAD_SET_TAG.
No backport is needed as there is no valid reason to build a stable haproxy
version against a development version of openssl.
It was inherited from acl_time, introduced in 1.3.10 by commit a84d374367
("[MAJOR] new framework for generic ACL support") and was never ever used.
Let's simply drop it now.
Signed bitfields of size `1` hold the values `0` and `-1`, but are
usually assigned `1`, possibly leading to subtle bugs when the value
is explicitely compared against `1`.
Most DNS servers provide A/AAAA records in the Additional section of a
response, which correspond to the SRV records from the Answer section:
;; QUESTION SECTION:
;_http._tcp.be1.domain.tld. IN SRV
;; ANSWER SECTION:
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A1.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A8.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A5.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A6.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A4.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A3.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A2.domain.tld.
_http._tcp.be1.domain.tld. 3600 IN SRV 5 500 80 A7.domain.tld.
;; ADDITIONAL SECTION:
A1.domain.tld. 3600 IN A 192.168.0.1
A8.domain.tld. 3600 IN A 192.168.0.8
A5.domain.tld. 3600 IN A 192.168.0.5
A6.domain.tld. 3600 IN A 192.168.0.6
A4.domain.tld. 3600 IN A 192.168.0.4
A3.domain.tld. 3600 IN A 192.168.0.3
A2.domain.tld. 3600 IN A 192.168.0.2
A7.domain.tld. 3600 IN A 192.168.0.7
SRV record support was introduced in HAProxy 1.8 and the first design
did not take into account the records from the Additional section.
Instead, a new resolution is associated to each server with its relevant
FQDN.
This behavior generates a lot of DNS requests (1 SRV + 1 per server
associated).
This patch aims at fixing this by:
- when a DNS response is validated, we associate A/AAAA records to
relevant SRV ones
- set a flag on associated servers to prevent them from running a DNS
resolution for said FADN
- update server IP address with information found in the Additional
section
If no relevant record can be found in the Additional section, then
HAProxy will failback to running a dedicated resolution for this server,
as it used to do.
This behavior is the one described in RFC 2782.
It is now possible to insert any attribute when a cookie is inserted by
HAProxy. Any value may be set, no check is performed except the syntax validity
(CTRL chars and ';' are forbidden). For instance, it may be used to add the
SameSite attribute:
cookie SRV insert attr "SameSite=Strict"
The attr option may be repeated to add several attributes.
This patch should fix the issue #361.
It is now possible to set the error message to use when a deny rule is
executed. It may be a specific error file, adding "errorfile <file>" :
http-request deny deny_status 400 errorfile /etc/haproxy/errorfiles/400badreq.http
It may also be an error file from an http-errors section, adding "errorfiles
<name>" :
http-request deny errorfiles my-errors # use 403 error from "my-errors" section
When defined, this error message is set in the HTTP transaction. The tarpit rule
is also concerned by this change.
It is now possible to set the error message to return to client in the HTTP
transaction. If it is defined, this error message is used instead of proxy's
errors or default errors.
It is now possible to import in a proxy, fully or partially, error files
declared in an http-errors section. It may be done using the "errorfiles"
directive, followed by a name and optionally a list of status code. If there is
no status code specified, all error files of the http-errors section are
imported. Otherwise, only error files associated to the listed status code are
imported. For instance :
http-errors my-errors
errorfile 400 ...
errorfile 403 ...
errorfile 404 ...
frontend frt
errorfiles my-errors 403 404 # ==> error 400 not imported
A new section may now be declared in the configuration to create global groups
of HTTP errors. These groups are not linked to a proxy and are referenced by
name. The section must be declared using the keyword "http-errors" followed by
the group name. This name must be unique. A list of "errorfile" directives may
be declared in such section. For instance:
http-errors website-1
errorfile 400 /path/to/site1/400.http
errorfile 404 /path/to/site1/404.http
http-errors website-2
errorfile 400 /path/to/site2/400.http
errorfile 404 /path/to/site2/404.http
For now, it is just possible to create "http-errors" sections. There is no
documentation because these groups are not used yet.
All custom HTTP errors are now stored in a global tree. Proxies use a references
on these messages. The key used for errorfile directives is the file name as
specified in the configuration. For errorloc directives, a key is created using
the redirect code and the url. This means that the same custom error message is
now stored only once. It may be used in several proxies or for several status
code, it is only parsed and stored once.
http_parse_errorloc() may now be used to create an HTTP 302 or 303 redirect
message with a specific url passed as parameter. A parameter is used to known if
it is a 302 or a 303 redirect. A status code is passed as parameter. It must be
one of the supported HTTP error codes to be valid. Otherwise an error is
returned. It aims to be used to parse "errorloc" directives. It relies on
http_load_errormsg() to do most of the job, ie converting it in HTX.
http_parse_errorfile() may now be used to parse a raw HTTP message from a
file. A status code is passed as parameter. It must be one of the supported HTTP
error codes to be valid. Otherwise an error is returned. It aims to be used to
parse "errorfile" directives. It relies on http_load_errorfile() to do most of
the job, ie reading the file content and converting it in HTX.
Now, this action is use its own dedicated function and is no longer handled "in
place" during the TCP rules evaluation. Thus the action name ACT_TCP_CAPTURE is
removed. The action type is set to ACT_CUSTOM and a check function is used to
know if the rule depends on request contents while there is no inspect-delay.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the TCP/HTTP rules evaluation. Thus the action names
ACT_ACTION_TRK_SC0 and ACT_ACTION_TRK_SCMAX are removed. The action type is now
the tracking index. Thus the function trk_idx() is no longer needed.
Now, the early-hint action uses its own dedicated action and is no longer
handled "in place" during the HTTP rules evaluation. Thus the action name
ACT_HTTP_EARLY_HINT is removed. In additionn, http_add_early_hint_header() and
http_reply_103_early_hints() are also removed. This part is now handled in the
new action_ptr callback function.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the HTTP rules evaluation. Thus the action names
ACT_HTTP_*_ACL and ACT_HTTP_*_MAP are removed. The action type is now mapped as
following: 0 = add-acl, 1 = set-map, 2 = del-acl and 3 = del-map.
Now, these actions use their own dedicated function and are no longer handled
"in place" during the HTTP rules evaluation. Thus the action names
ACT_HTTP_SET_HDR and ACT_HTTP_ADD_VAL are removed. The action type is now set to
0 to set a header (so remove existing ones if any and add a new one) or to 1 to
add a header (add without remove).
Now, these actions use their own dedicated function and are no longer handled
"in place" during the HTTP rules evaluation. Thus the action names
ACT_HTTP_REPLACE_HDR and ACT_HTTP_REPLACE_VAL are removed. The action type is
now set to 0 to evaluate the whole header or to 1 to evaluate every
comma-delimited values.
The function http_transform_header_str() is renamed to http_replace_hdrs() to be
more explicit and the function http_transform_header() is removed. In fact, this
last one is now more or less the new action function.
The lua code has been updated accordingly to use http_replace_hdrs().
<action> field in the act_rule structure is now an integer. The act_name values
are used for all actions without action function (but it is not a pre-requisit
though) or the action will have no effect. But for all other actions, any
integer value may used, only the action function will take care of it. The
default for such actions is ACT_CUSTOM.
Some flags can now be set on an action when it is registered. The flags are
defined in the act_flag enum. For now, only ACT_FLAG_FINAL may be set on an
action to specify if it stops the rules evaluation. It is set on
ACT_ACTION_ALLOW, ACT_ACTION_DENY, ACT_HTTP_REQ_TARPIT, ACT_HTTP_REQ_AUTH,
ACT_HTTP_REDIR and ACT_TCP_CLOSE actions. But, when required, it may also be set
on custom actions.
Consequently, this flag is checked instead of the action type during the
configuration parsing to trigger a warning when a rule inhibits all the
following ones.
The flags in the act_flag enum have been renamed act_opt. It means ACT_OPT
prefix is used instead of ACT_FLAG. The purpose of this patch is to reserve the
action flags for the actions configuration.
When TCP and HTTP rules are evaluated, if an action function (action_ptr field
in the act_rule structure) is defined for a given action, it is now always
called in priority over the test on the action type. Concretly, for now, only
custom actions define it. Thus there is no change. It just let us the choice to
extend the action type beyond the existing ones in the enum.
Info used by HTTP rules manipulating the message itself are splitted in several
structures in the arg union. But it is possible to group all of them in a unique
struct. Now, <arg.http> is used by most of these rules, which contains:
* <arg.http.i> : an integer used as status code, nice/tos/mark/loglevel or
action id.
* <arg.http.str> : an IST used as header name, reason string or auth realm.
* <arg.http.fmt> : a log-format compatible expression
* <arg.http.re> : a regular expression used by replace rules
Arguments used by actions are never released during HAProxy deinit. Now, it is
possible to specify a function to do so. ".release_ptr" field in the act_rule
structure may be set during the configuration parsing to a specific deinit
function depending on the action type.
In HTTP rules, error handling during a rewrite is now handle the same way for
all rules. First, allocation errors are reported as internal errors. Then, if
soft rewrites are allowed, rewrite errors are ignored and only the
failed_rewrites counter is incremented. Otherwise, when strict rewrites are
mandatory, interanl errors are returned.
For now, only soft rewrites are supported. Note also that the warning sent to
notify a rewrite failure was removed. It will be useless once the strict
rewrites will be possible.
the HTTP_MSGF_SOFT_RW flag must now be set on the HTTP transaction to ignore
rewrite errors on a message, from HTTP rules. The mode is called the soft
rewrites. If thes flag is not set, strict rewrites are performed. In this mode,
if a rewrite error occurred, an internal error is reported.
For now, HTTP_MSGF_SOFT_RW is always set and there is no way to switch a
transaction in strict mode.
The failed_secu counter is only used for the servers stats. It is used to report
the number of denied responses. On proxies, the same info is stored in the
denied_resp counter. So, it is more consistent to use the same field for
servers.
The stats field ST_F_EINT has been added to report internal errors encountered
per proxy, per listener and per server. It appears in the CLI export and on the
HTML stats page.
When HTTP/TCP rules are evaluated, especially HTTP ones, some results are
possible for normal actions and not for custom ones. So missing return codes
(ACT_RET_) have been added to let custom actions act as normal ones. Concretely
following codes have been added:
* ACT_RET_DENY : deny the request/response. It must be handled by the caller
* ACT_RET_ABRT : abort the request/response, handled by action itsleft.
* ACT_RET_INV : invalid request/response
Now, when HTTP rules are evaluated, HTTP_RULE_RES_ERROR must be returned when an
internal error is catched. It is a way to make the difference between a bad
request or a bad response and an error during its processing.
This counter, named 'internal_errors', has been added in frontend and backend
counters. It should be used when a internal error is encountered, instead for
failed_req or failed_resp.
Functions to deinitialize the HTTP rules are buggy. These functions does not
check the action name to release the right part in the arg union. Only few info
are released. For auth rules, the realm is released and there is no problem
here. But the regex <arg.hdr_add.re> is always unconditionally released. So it
is easy to make these functions crash. For instance, with the following rule
HAProxy crashes during the deinit :
http-request set-map(/path/to/map) %[src] %[req.hdr(X-Value)]
For now, These functions are simply removed and we rely on the deinit function
used for TCP rules (renamed as deinit_act_rules()). This patch fixes the
bug. But arguments used by actions are not released at all, this part will be
addressed later.
This patch must be backported to all stable versions.
The subscriber used to be passed as a "void *param" that was systematically
cast to a struct wait_event*. By now it appears clear that the subscribe()
call at every layer is well defined and always takes a pointer to an event
subscriber of type wait_event, so let's enforce this in the functions'
prototypes, remove the intermediary variables used to cast it and clean up
the comments to clarify what all these functions do in their context.
In practice all callers use the same wait_event notification for any I/O
so instead of keeping specific code to handle them separately, let's merge
them and it will allow us to create new events later.
For more than a decade we've kept all the sess_update_st_*() functions
in stream.c while they're only there to work in relation with what is
currently being done in backend.c (srv_redispatch_connect, connect_server,
etc). Let's move all this pollution over there and take this opportunity
to try to find slightly less confusing names for these old functions
whose role is only to handle transitions from one specific stream-int
state:
sess_update_st_rdy_tcp() -> back_handle_st_rdy()
sess_update_st_con_tcp() -> back_handle_st_con()
sess_update_st_cer() -> back_handle_st_cer()
sess_update_stream_int() -> back_try_conn_req()
sess_prepare_conn_req() -> back_handle_st_req()
sess_establish() -> back_establish()
The last one remained in stream.c because it's more or less a completion
function which does all the initialization expected on a connection
success or failure, can set analysers and emit logs.
The other ones could possibly slightly benefit from being modified to
take a stream-int instead since it's really what they're working with,
but it's unimportant here.
These ones used to serve as a set of switches between CO_FL_SOCK_* and
CO_FL_XPRT_*, and now that the SOCK layer is gone, they're always a
copy of the last know CO_FL_XPRT_* ones that is resynchronized before
I/O events by calling conn_refresh_polling_flags(), and that are pushed
back to FDs when detecting changes with conn_xprt_polling_changes().
While these functions are not particularly heavy, what they do is
totally redundant by now because the fd_want_*/fd_stop_*() actions
already perform test-and-set operations to decide to create an entry
or not, so they do the exact same thing that is done by
conn_xprt_polling_changes(). As such it is pointless to call that
one, and given that the only reason to keep CO_FL_CURR_* is to detect
changes there, we can now remove them.
Even if this does only save very few cycles, this removes a significant
complexity that has been responsible for many bugs in the past, including
the last one affecting FreeBSD.
All tests look good, and no performance regressions were observed.
