This patch extends a little previously added functionality to also
count retries and redispatches for servers. Now it is possible to know
which server causes redispatches as it is not always the same that takes
most retries.
While working with the code I found that redistribute_pending() does not increment
srv->redispatches && be->redispatches. I don't know how to test it but
I think the fix is correct. If not I can withdraw it.
I also extended logs to show how many retries were done and if redispatching
was necessary ('+'). I'm using an additional session flag SN_REDISP to match
redispatched connections. I had to rearrange all defines in session.h to make
more room for it.
The documentation about logs was also fixed a little (sorry, english only),
as current version uses totally different format. BTW: examples are still
outdated, maybe next time...
Finally, I changed %d -> %u for retries/redispatches as those variables
are declared as unsigned.
In order to offer DoS protection, it may be required to lower the maximum
accepted time to receive a complete HTTP request without affecting the client
timeout. This helps protecting against established connections on which
nothing is sent. The client timeout cannot offer a good protection against
this abuse because it is an inactivity timeout, which means that if the
attacker sends one character every now and then, the timeout will not
trigger. With the HTTP request timeout, no matter what speed the client
types, the request will be aborted if it does not complete in time.
This new parameter makes it possible to override the default
number of consecutive incoming connections which can be
accepted on a socket. By default it is not limited on single
process mode, and limited to 8 in multi-process mode.
Add the "backlog" parameter to frontends, to give hints to
the system about the approximate listen backlog desired size.
In order to protect against SYN flood attacks, one solution is
to increase the system's SYN backlog size. Depending on the
system, sometimes it is just tunable via a system parameter,
sometimes it is not adjustable at all, and sometimes the system
relies on hints given by the application at the time of the
listen() syscall. By default, HAProxy passes the frontend's
maxconn value to the listen() syscall. On systems which can
make use of this value, it can sometimes be useful to be able
to specify a different value, hence this backlog parameter.
It is sometimes required to know some informations such as the
process uptime when consulting statistics. This patch adds the
"show info" command to query those informations on the UNIX
socket.
This patch adds a possibility to invert most of available options by
introducing the "no" keyword, available as an additional prefix.
If it is found arguments are shifted left and an additional flag (inv)
is set.
It allows to use all options from a current defaults section, except
the selected ones, for example:
-- cut here --
defaults
contimeout 4200
clitimeout 50000
srvtimeout 40000
option contstats
listen stats 1.2.3.4:80
no option contstats
-- cut here --
Currenly inversion works only with the "option" keyword.
The patch also moves last_checks calculation at the end of the readcfgfile()
function and changes "PR_O_FORCE_CLO | PR_O_HTTP_CLOSE" into "PR_O_FORCE_CLO"
in cfg_opts so it is possible to invert forceclose without breaking httpclose
(and vice versa) and to invert tcpsplice in one proxy but to keep a proper
last_checks value when tcpsplice is used in another proxy. Now, the code
checks for PR_O_FORCE_CLO everywhere it checks for PR_O_HTTP_CLOSE.
I also decided to depreciate "redisp" and "redispatch" keywords as it is IMHO
better to use "option redispatch" which can be inverted.
Some useful documentation were added and at the same time I sorted
(alfabetically) all valid options both in the code and the documentation.
New in this version is a small intro to HTTP, then a detailed
explanation of the following keywords :
acl, appsession, balance, bind, block, capture cookie,
capture request header, capture response header, clitimeout,
contimeout, cookie, default_backend, disabled, enabled, errorfile,
http-check disable-on-404, monitor fail, option contstats,
timeout client, timeout clitimeout, timeout connect,
timeout contimeout.
Others will be alphabetically added.
The code in haproxy-1.3.13.1 only supports syslogging to an internet
address. The attached patch:
- Adds support for syslogging to a UNIX domain socket (e.g., /dev/log).
If the address field begins with '/' (absolute file path), then
AF_UNIX is used to construct the socket. Otherwise, AF_INET is used.
- Achieves clean single-source build on both Mac OS X and Linux
(sockaddr_in.sin_len and sockaddr_un.sun_len field aren't always present).
For handling sendto() failures in send_log(), it appears that the existing
code is fine (no need to close/recreate socket) for both UDP and UNIX-domain
syslog server. So I left things alone (did not close/recreate socket).
Closing/recreating socket after each failure would also work, but would lead
to increased amount of unnecessary socket creation/destruction if syslog is
temporarily unavailable for some reason (especially for verbose loggers).
Please consider this patch for inclusion into the upstream haproxy codebase.
A new "timeout" keyword replaces old "{con|cli|srv}timeout", and
provides the ability to independantly set the following timeouts :
- client
- tarpit
- queue
- connect
- server
- appsession
Additionally, the "clitimeout", "contimeout" and "srvtimeout" values
are supported but deprecated. No warning is emitted yet when they are
used since the option is very new.
Other timeouts should follow soon now.
Hello,
You will find attached an updated release of previously submitted patch.
It polish some part and extend ACL engine to match IP and PORT parsed in
HTTP request. (and take care of comments made by Willy ! ;))
Best regards,
Alexandre
By default, counters used for statistics calculation are incremented
only when a session finishes. It works quite well when serving small
objects, but with big ones (for example large images or archives) or
with A/V streaming, a graph generated from haproxy counters looks like
a hedgehog.
This patch implements a contstats (continous statistics) option.
When set counters get incremented continuously, during a whole session.
Recounting touches a hotpath directly so it is not enabled by default,
as it has small performance impact (~0.5%).
Some applications do not have a strict persistence requirement, yet
it is still desirable for performance considerations, due to local
caches on the servers. For some reasons, there are some applications
which cannot rely on cookies, and for which the last resort is to use
a parameter passed in the URL.
The new 'url_param' balance method is there to solve this issue. It
accepts a parameter name which is looked up from the URL and which
is then hashed to select a server. If the parameter is not found,
then the round robin algorithm is used in order to provide a normal
load balancing across the servers for the first requests. It would
have been possible to use a source IP hash instead, but since such
applications are generally buried behind multiple levels of
reverse-proxies, it would not provide a good balance.
The doc has been updated, and two regression testing configurations
have been added.
This patch adds the "maxqueue" parameter to the server. This allows new
sessions to be immediately rebalanced when the server's queue is filled.
It's useful when session stickiness is just a performance boost (even a
huge one) but not a requirement.
This should only be used if session affinity isn't a hard functional
requirement but provides performance boost by keeping server-local
caches hot and compact).
Absence of 'maxqueue' option means unlimited queue. When queue gets filled
up to 'maxqueue' client session is moved from server-local queue to a global
one.
Removed old unused MODE_LOG and MODE_STATS, and replaced the "stats"
keyword in the global section. The new "stats" keyword in the global
section is used to create a UNIX socket on which the statistics will
be accessed. The client must issue a "show stat\n" command in order
to get a CSV-formated output similar to the output on the HTTP socket
in CSV mode.
For people who manage many haproxies, it is sometimes convenient
to be informed of their version. This patch adds this, with the
option to disable this report by specifying "stats hide-version".
Also, the feature may be permanently disabled by setting the
STATS_VERSION_STRING to "" (empty string), or the format can
simply be adjusted.
The following patch will give the ability to tweak socket linger mode.
You can use this option with "option nolinger" inside fronted or backend
configuration declaration.
This will help in environments where lots of FIN_WAIT sockets are
encountered.
Sometimes it may be desirable to automatically refresh the
stats page. Most browsers support the "Refresh:" header with
an interval in seconds. Specifying "stats refresh xxx" will
automatically add this header.
This new configuration manual intends to document every known keyword
of the configuration language. Right now, it enumerates them all and
describes how to use ACLs.
It is now possible to read error messages from local files,
using the 'errorfile' keyword. Those files are read during
parsing, so there's no I/O involved. They make it possible
to return custom error messages with custom status and headers.
ACLs now support operators such as 'eq', 'le', 'lt', 'ge' and 'gt'
in order to give more flexibility to the language. Because of this
change, the 'dst_limit' keyword changed to 'dst_conn' and now requires
either a range or a test such as 'dst_conn lt 1000' which is more
understandable.
By default, epoll/kqueue used to return as many events as possible.
This could sometimes cause huge latencies (latencies of up to 400 ms
have been observed with many thousands of fds at once). Limiting the
number of events returned also reduces the latency by avoiding too
many blind processing. The value is set to 200 by default and can be
changed in the global section using the tune.maxpollevents parameter.
Peter van Dijk contributed this patch which implements the "smtpchk"
option, which is to SMTP what "httpchk" is to HTTP. By default, it sends
"HELO localhost" to the servers, and waits for the 250 message, but it
can also send a specific request.
Since the introduction of speculative I/O, it was not always possible
to correctly detect a connection establishment. Particularly, in TCP
mode, there is no data to send and getsockopt() returns no error. The
solution consists in trying a connect() again to get its diagnostic.
The principle behind speculative I/O is to speculatively try to
perform I/O before registering the events in the system. This
considerably reduces the number of calls to epoll_ctl() and
sometimes even epoll_wait(), and manages to increase overall
performance by about 10%.
The new poller has been called "sepoll". It is used by default
on Linux when it works. A corresponding option "nosepoll" and
the command line argument "-ds" allow to disable it.
Patch from Fabrice Dulaunoy. Explanation below, and script
merged in examples/.
This patch allow to put a different address in the check part for each
server (and not only a specific port)
I need this feature because I've a complex settings where, when a specific
farm goes down, I need to switch a set of other farm either if these other
farm behave perfectly well.
For that purpose, I've made a small PERL daemon with some REGEX or PORT
test which allow me to test a bunch of thing.
Patch from Bryan Germann for 1.2.17.
In some circumstances, it is useful not to add the X-Forwarded-For
header, for instance when the client is another reverse-proxy or
stunnel running on the same machine and which already adds it. This
patch adds the "except" keyword to the "forwardfor" option, allowing
to specify an address or network which will not be added to this
header.
Patch from Marcus Rueckert for 1.2.17 :
"I added the attached patch to haproxy. I don't have a static uid/gid for
haproxy so i need to specify the username/groupname to run it as non
root user."
Some parts of HTTP processing were incorrectly called "request" while
they are messages or transactions. The following structure members
have changed :
http_msg.hdr_state => msg_state
http_msg.sor => som
http_req.req_state => removed
http_req => http_txn
