It's useful to instantly see how many patches of each category have
already been backported and are still pending, let's count them and
report them at the top of the page.
Decode QUIC MUX connection and stream elements via qcc_show_flags() and
qcs_show_flags(). Flags definition have been moved outside of USE_QUIC
to ease compilation of flags binary.
It is no possible yet to use it. Idles connections and pipelining mode are
not supported for now. But it should be possible to open a SPOP connection,
perform the HELLO handshake, send a NOTIFY frame based on data produced by
the client side and receive the corresponding ACK frame to transfer its
content to the client side.
The related issue is #2502.
The script hadn't been updated since it was introduced, and the
hard-coded field 12 doesn't match anymore (it's 16 now). Let's just
use "grep -o cflg..." to extract the desired part more flexibly.
This can be backported at least to 3.0, probably further, but it
will need to be tested prior to this. Better not bring it too far,
it's only used when debugging.
We're now locking the tail while looking for some room in the ring. In
fact it's still while writing to it, but the goal definitely is to get
rid of the lock ASAP. For this we reserve the topmost bit of the tail
as a lock, which may have as a possible visible effect that buffers will
be limited to 2GB instead of 4GB on 32-bit machines (though in practise,
good luck for allocating more than 2GB contiguous on 32-bit), but in
practice since the size is read with atol() and some operating systems
limit it to LONG_MAX unless passing negative numbers, the limit is
already there.
For now the impact on x86_64 is significant (drop from 2.35 to 1.4M/s
on 48 threads on EPYC 24 cores) but this situation is only temporary
so that changes can be reviewable and bisectable.
Other approaches were attempted, such as using XCHG instead, which is
slightly faster on x86 with low thread counts (but causes more write
contention), and forces readers to stall under heavy traffic because
they can't access a valid value for the queue anymore. A CAS requires
preloading the value and is les good on ARMv8.1. XADD could also be
considered with 12-13 upper bits of the offset dedicated to locking,
but that looks overkill.
We really want to let the readers and writers act on different areas, so
we want to have the tail and the head on separate cache lines, themselves
separate from the rest of the ring. Doing so improves the performance from
2.15 to 2.35M msg/s at 48 threads on a 24-core EPYC.
This increases the header space from 32 to 192 bytes when threads are
enabled. But since we already have the header size available in the file,
haring remains able to detect the aligned vs unaligned formats and call
dump_v2a() when aligned is detected.
The purpose is to store a head and a tail that are independent so that
we can further improve the API to update them independently from each
other.
The struct was arranged like the original one so that as long as a ring
has its head set to zero (i.e. no recycling) it will continue to work.
The new format is already detectable thanks to the "rsvd" field which
indicates the number of reserved bytes at the beginning. It's located
where the buffer's area pointer previously was, so that older versions
of haring can continue to open the ring in repair mode, and newer ones
can use the fact that the upper bits of that variable are zero to guess
that it's working with the new format instead of the old one. Also let's
keep in mind that the layout will further change to place some alignment
constraints.
The haring tool will thus updated based on this and it detects that the
rsvd field is smaller than a page and that the sum of it with the size
equals the mapped size, in which case it uses the new dump_v2() function
instead of dump_v1(). The new function also creates a buffer from the
ring's area, size, head and tail and calls the generic one so that no
other code had to be adapted.
Instead of emitting a warning, since we don't need the ring struct
anymore, we can just read what we need, parse the buffer and use the
advertised offset. Thus for now -f is simply ignored.
By splitting the initialization and the parsing of the ring, we'll ease
the support for multiple ring sizes and get rid of the annoyances of the
optional lock.
haring needs to be self-sufficient about the ring format so that it continues
to build when the ring API changes. Let's import the struct ring definition
and call it "ring_v1".
In issue #2427 Ilya reports that gcc-14 rightfully complains about
sizeof() being placed in the left term of calloc(). There's no impact
but it's a bad pattern that gets copy-pasted over time. Let's fix the
few remaining occurrences (debug.c, halog, udp-perturb).
This can be backported to all branches, and the irrelevant parts dropped.
For HPACK-encoded headers (particularly with huffman encoding), it's
really necessary to support hex sequences as they appear in RFC7541
examples, so let's support hex digit pairs with -R.
Now it's possible to do this to send GET https://www.example.com/ :
(dev/h2/mkhdr.sh -t p; dev/h2/mkhdr.sh -t s;
dev/h2/mkhdr.sh -t h -i 1 -f es,eh \
-R '8286 8441 0f77 7777 2e65 7861 6d70 6c65 2e63 6f6d ') | nc 0 8080
We have a few places where we're checking many status codes. The sets
are so small that just a multiply, a shift and an optional xor are
sufficient to turn that into a smaller set. The program used to produce
them is hackish as it allows to easily fiddle with various operations
manually and experiment by brute-forcing a pair of integers for the
mul and the xor. It also supports producing an incomplete table that
gives an easier modulo operation. Let's commit it as-is so that it can
be reused later (e.g. if new status codes are introduced for example).
Some rare commit messages area really too large because they contain
code excerpts in the message body or are release commits with their
changelog. In this case, instead of leaving an empty file that will
be silently ignored, let's produce an output message indicating that
the verdict is uncertain, with an explanation stating that there was
an error.
With -r it's possible to pass raw data that will be interpreted by
printf so it even supports \x sequences. E.g. for a RST_STREAM, let's
just use \x00\x00\x00\x00.
In order to spot old patches marked "wait" that have not yet been
backported, it's convenient to be able to click "all" to start the
review from the first patch, deselect "no", "uncertain" and "backported",
leaving only "wait" and "yes". This will reveal all pending patches that
have still not yet been backported, including those prior to the last
review, allowing to reconsider older patches marked "wait" that have
not yet been picked.
The statuses[] table was pre-filled from the shell code during
initialization based on the evaluation and the buttons pre-checked
accordingly, but upon reload, the checked buttons are preserved and
the statuses reinitialized, leading to a different status and color
on lines that were changed.
In practice we don't need this table and we can directly check each
button's state. This makes sure that displayed state is consistent
with checked buttons and allows to preserve the statuses upon reloads
to benefit from updates. Only the start of the review is reset upon
reload now (this allows to consider latest backport state). Of course,
a full reload (shift-ctrl-R) continues to reset the form.
This is a set of scripts, prompts and howtos to have an LLM read commit
messages and determine with great accuracy whether the patch's author
intended for the patch to be backported ASAP, backported after some time,
not backported, or unknown state. It provides all this in an interactive
interface making it easy to adjust choices and proceed with what was
selected. This has been improving over the last 9 months, as helped to
spot patches for a handful of backport sessions, and was only limited by
usability issues (UI). Now that these issues are solved, let's commit the
tool in its current working state. It currently runs every hour in a
crontab for me and started to prove useful since the last update, so it
should be considered in a usable state now, especially since this latest
update reaches close to 100% accuracy compared to a human choice, so it
saves precious development time and may allow stable releases to be
emitted more regularly.
There's detailed readme, please read it before complaining about the
ugliness of the UI :-)
The ring lock was initially mostly used for the logs and used to inherit
its name in lock stats. Now that it's exclusively used by rings, let's
rename it accordingly.
fd.state is reported without the "0x" prefix in show sess, let's support
this during decoding.
This may be backported to all versions supporting this utility.
This script can be used through a http-request rules to log SSL keys for
traffic on a dedicated frontend. The resulting file can then be injected
into wireshark to decipher the corresponding network capture.
Highlighting a few fields helps spot them, but only if there are not too
many. What is done here is the following:
- the first line of each stream is highlighted in white (helps find
beginning/end in long dumps
- fields in the form name=value where value starts with upper case
letters are considered as a state dump (e.g. stconn state) and are
also highlighted. This results in ~20 pairs. In this case the name
and value use two different colors (cyan vs yellow) to further help
find what is being looked for
This is only done when the output is a terminal or when --color=always
is passed. It's also possible to disable it with --color=never or
--no-color.
Some fields are followed by a comma or a closing parenthesis and we
take them because we read everything that's not a space. Better be
stricter, we're causing warnings about incorrect hex format when
they're passed to printf.
Ideally haring should be compiled with the same options as haproxy so
that ring headers have the same size (e.g. with/without locks, with/
without lock debugging). But when enabling DEBUG_STRICT, BUG_ON() is
enabled and breaks the build by making references to complain() and
ha_backtrace_to_stderr().
Let's just disable DEBUG_STRICT before opening include files. This is
sufficient to address the problem.
This may be backorted to older versions that include haring.
Now we can build a series of data frames by reading from a file and
chunking it into frames of requested length. It's mostly useful for
data frames (e.g. post). One way to announce these upfront is to
capture the output of curl use without content-length:
$ nc -lp4446 > post-h2-nocl.bin
$ curl -v --http2-prior-knowledge http://127.0.0.1:4446/url -H "content-length:" -d @/dev/null
Then just change the 5th byte from the end from 1 to 0 to remove the
end-of-stream bit, it will allow to chain a file, then to send an
empty DATA frame with ES set :
$ (dev/h2/mkhdr.sh -i 1 -t data -d CHANGELOG;
dev/h2/mkhdr.sh -i 1 -t data -l 0 -f es) > h2-data-changelog.bin
Then post that to the server:
$ cat post-h2-nocl.bin h2-data-changelog.bin | nc 0 4446
The ring's offset currently contains a perpetually growing custor which
is the number of bytes written from the start. It's used by readers to
know where to (re)start reading from. It was made absolute because both
the head and the tail can change during writes and we needed a fixed
position to know where the reader was attached. But this is complicated,
error-prone, and limits the ability to reduce the lock's coverage. In
fact what is needed is to know where the reader is currently waiting, if
at all. And this location is exactly where it stored its count, so the
absolute position in the buffer (the seek offset from the first storage
byte) does represent exactly this, as it doesn't move (we don't realign
the buffer), and is stable regardless of how head/tail changes with writes.
This patch modifies this so that the application code now uses this
representation instead. The most noticeable change is the initialization,
where we've kept ~0 as a marker to go to the end, and it's now set to
the tail offset instead of trying to resolve the current write offset
against the current ring's position.
The offset was also used at the end of the consuming loop, to detect
if a new write had happened between the lock being released and taken
again, so as to wake the consumer(s) up again. For this we used to
take a copy of the ring->ofs before unlocking and comparing with the
new value read in the next lock. Since it's not possible to write past
the current reader's location, there's no risk of complete rollover, so
it's sufficient to check if the tail has changed.
Note that the change also has an impact on the haring consumer which
needs to adapt as well. But that's good in fact because it will rely
on one less variable, and will use offsets relative to the buffer's
head, and the change remains backward-compatible.
Since 7d84439 ("BUILD: hpack: include global.h for the trash that is needed
in debug mode"), hpack decode tool fails to compile on targets that enable
USE_THREAD. (ie: linux-glibc target as reported by Christian Ruppert)
When building hpack devtool, we are including src/hpack-dec.c as a dependency.
src/hpack-dec.c relies on the global trash whe debug mode is enabled.
But as we're building hpack tool with a limited scope of haproxy
sources, global trash (which is declared in src/chunk.c) is not available.
Thus, src/hpack-dec.c relies on a local 'trash' variable declared within
dev/hpack/decode.c
This used to work fine until 7d84439.
But now that global.h is explicitely included in src/hpack-dec.c,
trash variable definition from decode.c conflicts with the one from global.h:
In file included from include/../src/hpack-dec.c:35,
from dev/hpack/decode.c:87:
include/haproxy/global.h:52:35: error: thread-local declaration of 'trash' follows non-thread-local declaration
52 | extern THREAD_LOCAL struct buffer trash;
Adding THREAD_LOCAL attribute to 'decode.c' local trash variable definition
makes the compiler happy again.
This should fix GH issue #2009 and should be backported to 2.7.
In case a file-backed ring was not properly synced before being dumped,
the output can look bogus due to the head pointer not being perfectly
up to date. In this case, passing "-r" will make haring automatically
skip entries not starting with a zero, and resynchronize with the rest
of the messages.
This should be backported to 2.6.
Since the tool permits to pass an FD bound for listening, it's convenient
to test haproxy's "bind fd@". Let's add support for UNIX sockets the same
way. -U needs to be passed to change the default address family, and the
address must contain a "/".
E.g.
$ dev/tcploop/tcploop -U /tmp/ux L Xi ./haproxy -f fd1.cfg
When -e is passed, epoll is used instead of poll. The FD is added
then removed around the call to epoll_wait() so that we don't need
to track it. The only purpose is to compare events reported by each
syscall.
Christopher Faulet
Willy Tarreau
Ilya Shipitsin
Amaury Denoyelle
Aurelien DARRAGON