This one has been removed and is now totally superseded by ->target.
To get the server, one must use target_srv(&s->target) instead of
s->srv now.
The function ensures that non-server targets still return NULL.
When dealing with HTTP keep-alive, we'll have to know if we can reuse
an existing connection. For that, we'll have to check if the current
connection was made on the exact same target (referenced in the stream
interface).
Thus, we need to first assign the next target to the session, then
copy it to the stream interface upon connect(). Later we'll check for
equivalence between those two operations.
If a server is disabled or tracking a disabled server, it must not
dequeue requests pending in the proxy queue, it must only dequeue
its own ones.
The problem that was caused is that if a backend always had requests
in its queue, a disabled server would continue to take traffic forever.
(was commit 09d02aaf02d1f21c0c02672888f3a36a14bdd299 in 1.4)
There are a few remaining max values that need to move to counters.
Also, the counters are more often used than some config information,
so get them closer to the other useful struct members for better cache
efficiency.
Kai Krueger found that previous patch was incomplete, because there is
an unconditionnal call to process_srv_queue() in session_free() which
still causes a dead server to consume pending connections from the
backend.
This call was made unconditionnal so that we don't leave unserved
connections in the server queue, for instance connections coming
in with "option persist" which can bypass the server status check.
However, the server must not touch the backend's queue if it is down.
Another fear was that some connections might remain unserved when
the server is using a dynamic maxconn if the number of connections
to the backend is too low. Right now, srv_dynamic_maxconn() ensures
this cannot happen, so the call can remain conditionnal.
The fix consists in allowing a server to process it own queue whatever
its state, but not to touch the backend's queue if it is down. Its
queue should normally be empty when the server is down because it is
redistributed when the server goes down. The only remaining cases are
precisely the persistent connections with "option persist" set, coming
in after the queue has been redispatched. Those ones must still be
processed when a connection terminates.
(cherry picked from commit cd485c44807bfcdb4928dd83c1907636b4e1b6f3)
srv_dynamic_maxconn() is clearly documented as returning at least 1
possible connection under throttling. But the computation was wrong,
the minimum 1 was divided and got lost in case of very low maxconns.
Apply the MAX(1, max) before returning the result in order to ensure
that a newly appeared server will get some traffic.
(cherry picked from commit 819970098f134453c0934047b3bd3440b0996b55)
It's very frequent to require some information about the
reason why a task is running. Some flags have been added
so that a task now knows if it got woken up due to I/O
completion, timeout, etc...
It should be stated as a rule that a C file should never
include types/xxx.h when proto/xxx.h exists, as it gives
less exposure to declaration conflicts (one of which was
caught and fixed here) and it complicates the file headers
for nothing.
Only types/global.h, types/capture.h and types/polling.h
have been found to be valid includes from C files.
The dequeuing logic was completely wrong. First, a task was assigned
to all servers to process the queue, but this task was never scheduled
and was only woken up on session free. Second, there was no reservation
of server entries when a task was assigned a server. This means that
as long as the task was not connected to the server, its presence was
not accounted for. This was causing trouble when detecting whether or
not a server had reached maxconn. Third, during a redispatch, a session
could lose its place at the server's and get blocked because another
session at the same moment would have stolen the entry. Fourth, the
redispatch option did not work when maxqueue was reached for a server,
and it was not possible to do so without indefinitely hanging a session.
The root cause of all those problems was the lack of pre-reservation of
connections at the server's, and the lack of tracking of servers during
a redispatch. Everything relied on combinations of flags which could
appear similarly in quite distinct situations.
This patch is a major rework but there was no other solution, as the
internal logic was deeply flawed. The resulting code is cleaner, more
understandable, uses less magics and is overall more robust.
As an added bonus, "option redispatch" now works when maxqueue has
been reached on a server.
The reported queue position in the logs was 0 for the first pending request
in the queue, which is wrong because it means that one request will have to
be completed before the queued one may execute. It caused the undesired side
effect that 0/0 was reported when either 0 or 1 request was pending in the
queue. Thus, we have to increment the queue size before reporting the value.
When a server terminates a connection, the next session in its
own queue was immediately processed. Because of this, if all
server queues are always filled, then no new anonymous request
will be processed. Consider oldest request between global and
server queues to choose from which to pick the request.
An improvement over this will consist in adding a configurable
offset when comparing expiration dates, so that cookie-less
requests can get either less or more priority.
The new 'slowstart' parameter for a server accepts a value in
milliseconds which indicates after how long a server which has
just come back up will run at full speed. The speed grows
linearly from 0 to 100% during this time. The limitation applies
to two parameters :
- maxconn: the number of connections accepted by the server
will grow from 1 to 100% of the usual dynamic limit defined
by (minconn,maxconn,fullconn).
- weight: when the backend uses a dynamic weighted algorithm,
the weight grows linearly from 1 to 100%. In this case, the
weight is updated at every health-check. For this reason, it
is important that the 'inter' parameter is smaller than the
'slowstart', in order to maximize the number of steps.
The slowstart never applies when haproxy starts, otherwise it
would cause trouble to running servers. It only applies when
a server has been previously seen as failed.
The timeout functions were difficult to manipulate because they were
rounding results to the millisecond. Thus, it was difficult to compare
and to check what expired and what did not. Also, the comparison
functions were heavy with multiplies and divides by 1000. Now, all
timeouts are stored in timevals, reducing the number of operations
for updates and leading to cleaner and more efficient code.
The rbtree-based wait queue consumes a lot of CPU. Use the ul2tree
instead. Lots of cleanups and code reorganizations made it possible
to reduce the task struct and simplify the code a bit.
The fiprm and beprm were added to ease the transition between
a single listener mode to frontends+backends. They are no longer
needed and make the code a bit more complicated. Remove them.
The maxconn argument is used only for the listeners, and the
fullconn is used only for the backends. If unset, it inherits
maxconn's value which itself can inherit the default or the
global value (we might need to change this).
The nbconn attribute in the proxies was not relevant anymore because
a frontend A may use backend B and both of them must account for their
respective connections. For this reason, there now are two separate
counters for frontend and backend connections.
The stats page has been updated to reflect the backend, but a separate
line entry for the frontend with error counts would be good.
Note that as of now, beconn may be higher than maxconn, because maxconn
applies to the frontend, while beconn may be increased due to sessions
passed from another frontend.
There was a confusion about the way to find filters and backend
parameters from sessions. The chaining has been changed between
the session and the proxy.
Now, a session knows only two proxies : one frontend (->fe) and
one backend (->be). Each proxy has a link to the proxy providing
filters and to the proxy providing backend parameters (both self
by default).
The captures (cookies and headers) have been attached to the
frontend's filters for now.
The uri_auth and the statistics are attached to the backend's
filters so that the uri can depend on a hostname for instance.
The references to the proxy from the session have been turned into
Frontend (fe), Filters (fi) and Backend (be). This should ease the
migration to the L7 switching features. Next step will be to kill
the struct proxy and have 3 independant structs instead, each
referenced from entities called listener, frontend, filters and
backend.
As suggested by Markus Elfring, a few "const char *" have replaced
some "char *" declarations where a function is not expected to
modify a value. It does not change the code but it helps detecting
coding errors.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
