On m1, kpc_get_counter_count(KPC_MASK) return 8 in my test. The
exact value doesn't matter in our case, as long as we have a
sufficiently large array
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
The check should be >= 0, not > 0. The check itself is redundant
since uninit only being called after init is success.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
As of mbedTLS 3.6.0 TLSv1.3 is enabled by default and certificate verification
is now mandatory. Our default configuration does not do verification, so
downgrade to 1.2 in these situations to avoid breaking it.
ref: https://github.com/Mbed-TLS/mbedtls/issues/7075
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The default timer register pmccntr_el0 usually requires enabling
access with e.g. a kernel module (while it is accessible by
default on Windows). On Linux, the default for checkasm benchmarks
is to use perf (if suitable headers are available) though.
On macOS, using cntvct_el0 gives measurements with the same
magnitude as mach_absolute_time (which is used currently), but
possibly with a little less overhead/noise.
Signed-off-by: Martin Storsjö <martin@martin.st>
The SEI handling of libx265 is buggy and can easily lead
to memory corruption: It reuses certain buffers, but when
reusing them it presumes that it is enough for these buffers
to exist and does not check whether they are actually large
enough to hold what is intended to be stored in them.*
Our users are exposed to this because forwarding A53 CC data
is enabled by default. Change this to make it disabled
by default.
"Fixes" tickets #10411, #11052 and (presumably) #10906.
*: See https://trac.ffmpeg.org/ticket/9666#comment:1
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add external encoder VVenC for H266/VVC encoding.
Register new encoder libvvenc.
Add libvvenc to wrap the vvenc interface.
libvvenc implements encoder option: preset,qp,qpa,period,
passlogfile,stats,vvenc-params,level,tier.
Enable encoder by adding --enable-libvvenc in configure step.
Co-authored-by: Christian Bartnik chris10317h5@gmail.com
Signed-off-by: Thomas Siedel <thomas.ff@spin-digital.com>
The vendor has long since switched to Arm, with the last product
reaching their official end-of-life over 11 years ago. Linux support for
the ISA was dropped 7 years ago. More importantly, this architecture was
never supported by upstream GCC, and the vendor fork is stuck at version
4.2, which FFmpeg no longer supports (as per C11 requirement).
Presumably, this is still the case given the lack of vendor support.
Indeed all of the code being removed here consisted of inline assembler
scalar optimisations. A sane C compiler should be able to perform those
automatically nowadays (with the sole exception of fast CLZ detection),
but this is moot as this architecture is evidently dead.
The code as written was wrong. In the spec, these fields are treated
merely as plain integers in the range 0 to 4095. The only difference
between L2 and L8 is that L2.ms_weight also accepts an additional value
of -1, hence the extra sign bit. While it's likely that these are still
shifted integers in disguise, since all real-world samples seem to use
a value of 2048 here, the offset used in the code was wrong.
In addition, because the l8.ms_weight struct member is unsigned, these
wrong shifting semantics ended up overflowing the field, leading to
undefined behavior when transcoding. Fortunately, the damage was
relatively contained in practice, because it just corrupts the coding of
this field, which is ignored in practice in all implementations I have
seen.
Introduced in 1992, the Alpha was a 64-bit RISC processor designed
to replace the VAX CISC machines sold by Digital Equipment Corporation.
After Digital was acquired by Compaq in 1998 -- who themselves would be
later purchased by Hewlett-Packard, the architecture was phased out over
the following decade. It became effectively defunct in 2007, the last
publicly available processor being the Alpha 21364.
FFmpeg has not added any DSP code for this architecture since lowres2
was introduced in 2012, and it is more than unlikely someone still wishes
to maintain it.
Remove the DSP and support code.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Support for SuperH was dropped over a decade ago. There no longer is any
architecture-specific code to be found, so just remove the corresponding
test. Technically it is still possible to compile FFmpeg as the
"generic" (pure C) architecture.
C code or compiler built-ins are preferable over inline assembler for
byte-swaps as it allows for better optimisations (e.g. instruction
scheduling) which would otherwise be impossible.
As with f64c2e710f for x86 and Arm,
this removes the inline assembler on GCC (and Clang) since we now
require recent enough compiler versions. This indeed seems to work on
AArch64, SuperH and, if Zbb is enabled, RISC-V. (AVR32 was not tested
since it has no known working compilers at this time.)
Since the C11 support is required, those GCC versions can no longer be
supported anyhow. (Clang pretends to be GCC 4.4, but it looks like the
code was intended for old GCC specifically.)
Since the C11 support is required, those GCC versions can no longer be
supported anyhow. (Clang pretends to be GCC 4.4, but the removed code
does not seem to have been intended for Clang.)
Currently it is only done if the final CTB address is at the end of the
frame, however that address is not known with hwaccel decoding. As we
only support exactly one AU per packet, and not partial/multiple AUs, we
can just as well call hevc_frame_end() unconditionally.
Fixes hwaccel decoding after d725c737fe.
Reported-by: llyyr <llyyr.public@gmail.com>
Also make the iso_channel_position table consistent with what the AAC decoder
uses in avcodec/aac/aacdec_usac.c.
Fate changes are caused by the change of how 7.1 layout is mapped, previously
it included Side Surround channels, now it includes the Surround channels.
Signed-off-by: Marton Balint <cus@passwd.hu>
On the top of p. 112 in VVC (09/2023):
It is a requirement of bitstream conformance that the values of
qpInVal[ i ][ j ] and qpOutVal[ i ][ j ] shall be in the range
of −QpBdOffset to 63, inclusive for i in the range of 0 to
numQpTables − 1, inclusive, and j in the range of 0 to
sps_num_points_in_qp_table_minus1[ i ] + 1, inclusive.
Additionally, don't discard the return code from sps_chroma_qp_table.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Besides being write only it had the wrong type:
An uint8_t is definitely not enough to store the size
of these buffers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has been added in 3a87ac948f,
but there was never an implementation different from the ordinary
dct_quantize of it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Use the common approach whereby the _c versions are set first
and then (potentially) overwritten by the arch-specific ones
instead of calling the arch-specific code first, followed by
setting the function pointers that have not already been set.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The C version is set in ff_dct_encode_init(), yet the MIPS version
is set in dct_init() (in ff_mpv_common_init() and therefore also
for decoders). This commit fixes this inconsistency.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
