When the deprecated option "user-agent" was set to something different
than its default value, said option would always precede and overwrite
the ordinary user_agent option (regardless of whether it was explicitly
set) which leads to a leak of the user_agent option (which has a default
value, so the leak happens always).
Fix this by setting the same destination for both options; the last
option applied wins then.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
FFmpeg does not support POST, so there is no difference between a
308 and 301 request (see [RFC7538] section 3).
Signed-off-by: Josh Dekker <josh@itanimul.li>
Add 2 new options:
- reconnect_on_http_error - a list of http status codes that should be
retried. the list can contain explicit status codes / the strings
4xx/5xx.
- reconnect_on_network_error - reconnects on arbitrary errors during
connect, e.g. ECONNRESET/ETIMEDOUT
the retry employs the same exponential backoff logic as the existing
reconnect/reconnect_at_eof flags.
related tickets:
https://trac.ffmpeg.org/ticket/6066https://trac.ffmpeg.org/ticket/7768
Signed-off-by: Marton Balint <cus@passwd.hu>
When the check was added (in 3668701f96, in 2015), some IO
functions returned 0 on EOF (in particular, the TCP protocol
did, but the TLS protocol returned AVERROR_EOF). Since
0e1f771d22 in 2017, the TCP protocol also returns AVERROR_EOF
instead of 0, making the check for premature end never have the
intended effect.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some real-world sites use an authorization header with a bearer token; when
combined with lengthy request parameters to identify the video segment,
it's rather trivial these days to have a request body of more than 4k bytes.
MAX_URL_SIZE is hard-coded to 4k bytes in libavformat/internal.h, and
HTTP_HEADERS_SIZE is 4k as well in libavformat/http.h, so this patch increases
the buffer size to 8k, as that is the default request body limit in Apache, and
most other httpds seem to support at least as much, if not more.
Signed-off-by: Marton Balint <cus@passwd.hu>
v2: Use s->buffer for creating request (as the old code did) instead of
the AVBPrint internal buffer. Some minor cosmetics.
Signed-off-by: Marton Balint <cus@passwd.hu>
It is explicitly required by the HTTP RFC. Without this patch URLs like
http://example.com?query will not work.
Fixes ticket #8466.
Signed-off-by: Marton Balint <cus@passwd.hu>
RFC 3986 states that the fragment identifier is separated from the rest of the
URI prior to a dereference, and thus the identifying information within the
fragment itself is dereferenced solely by the user agent.
Signed-off-by: Marton Balint <cus@passwd.hu>
add ff_http_do_new_request2() which supports options to be applied to
HTTPContext after initialisation with the new uri
Signed-off-by: Steven Liu <lq@onvideo.cn>
Signed-off-by: vectronic <hello.vectronic@gmail.com>
this function is used to get the previous shutdown status
when reusing the old connection in block mode.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Fix ticket #7297
The current setting for send-expect-100 option is either
enabled if applicable or forced enabled, no option to force
disable the header. This change is to expand the option setting
to provide more flexibility, which is useful for rstp case.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids making invalid HTTP Range requests for a byte range past the
known end of the file during a seek. Those requests generally return a HTTP
response of 416 Range Not Satisfiable, which causes an error response.
Reference: https://tools.ietf.org/html/rfc7233
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
In write only mode, the TCP receive buffer's data keeps growing with
http response messages and the buffer eventually becomes full.
This results in zero tcp window size, which in turn causes unwanted
issues, like, terminated tcp connection. The issue is apparent when
http persistent connection is enabled in hls/dash live streaming use
cases. To overcome this issue, the logic here reads the buffer data
when a file transfer is completed, so that any accumulated data in
the recieve buffer gets flushed out.
This refactors get_cookies to simplify some code paths, specifically for
skipping logic in the while loop or exiting it. It also simplifies the logic
for appending additional values to *cookies by replacing strlen/malloc/snprintf
with one call av_asnprintf.
This refactor fixes a bug where the cookie_params AVDictionary would get leaked
if we failed to allocate a new buffer for writing to *cookies.
If the string consists entirely of whitespace, this could in theory
continue to write '\0' before the start of the memory allocation. In
practice, it didn't really happen: the generic HTTP header parsing code
already skips leading whitespaces, so the string is either empty, or
consists a non-whitespace. (The generic code and the cookie code
actually have different ideas about what bytes are whitespace: the
former uses av_isspace(), the latter uses WHITESPACES. Fortunately,
av_isspace() is a super set of the http.c specific WHITESPACES, so
there's probably no case where the above assumption could have been
broken.)
It's trivial to craft a HTTP response that will make the code for
skipping trailing whitespace access and possibly overwrite bytes outside
of the memory allocation. Why this can happen is blindingly obvious: it
accesses cstr[strlen(cstr)-1] without checking whether the string is
empty.
libavformat prints a warning that the cookie couldn't be parsed (see
callers of parse_cookie()). This is obviously not true - it could be
parsed, but was simply ignored. Don't return an error to avoid the
warning.
The condition was a bit too long, and most editors will break the line
and turn it into an unreadable mess. Move out some of the conditions.
This should not change the behavior.
If the stream was aborted using the libavformat interrupt callback, we
don't want it to log the reconnect warning. (Exiting after logging this
warning worked well, so this is only for avoiding the ugly warning.)
It makes no sense to return an error after the first reconnect, and then
somehow resume the next time it's called. Usually this will lead to
demuxer errors. Make reconnecting block instead, until it has either
successfully reconnected, or given up.
Also make the wait reasonably interruptible. Since there is no mechanism
for this in the API, polling is the best we can do. This behaves roughly
the same as other interruptible network functions in libavformat.
(The original code would work if it returned AVERROR(EAGAIN) or so,
which would make retry_transfer_wrapper() repeat the read call. But I
think having an explicit loop for this is better anyway.)
I also snuck in a fix for reconnect_at_eof. It has to check for
AVERROR_EOF, not 0.
Can be used by the api user to figure out what http features the server supports based on the response received.
Signed-off-by: Aman Gupta <aman@tmm1.net>
This makes do_new_request fail early when dealing with a http/1.0 server, avoiding unnecessary "reconnecting" warnings shown to the user.
Signed-off-by: Aman Gupta <aman@tmm1.net>
This fixes a deadlock when using the hls demuxer's new http_persistent feature
to stream a youtube live stream over HTTPS. The youtube servers are http/1.1
compliant, but return a "Connecton: close". Before this commit, the demuxer
would attempt to send a new request on the partially shutdown connection and
cause a deadlock in the tls protocol.
Signed-off-by: Aman Gupta <aman@tmm1.net>
This mimics logging that was added in 53e0d5d724 for security
purposes.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This will prevent improper use of ff_http_do_new_request() if the user
tries to send a request for a different host to a previously connected
persistent http/1.1 connection.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Karthick J <kjeyapal@akamai.com>
Currently if you use the multiple_requests=1 option and try to
receive a chunked-encoded response, http_buf_read() will hang forever.
After this patch, EOF is emulated once a 0-byte final chunk is
received by setting a new flag. This flag is reset in ff_http_do_new_request(),
which is used to make additional requests on the open socket.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Aman Gupta <aman@tmm1.net>
transfer_func variable passed to retry_transfer_wrapper
are h->prot->url_read and h->prot->url_write functions.
These need to return EOF or other error properly.
In case of returning >= 0, url_read/url_write is retried
until error is returned.
Signed-off-by: Daniel Kucera <daniel.kucera@gmail.com>
Andreas Rheinhardt
Robin Cooksey
erankor
Martin Storsjö
Zhao Zhili
Joey Smith
Limin Wang
Marton Balint
Steven Liu
vectronic
Jun Li
Carl Eugen Hoyos
Justin Ruggles
Wenxiang Qian
Gyan Doshi
kjeyapal@akamai.com
Clément Bœsch
Vishwanath Dixit
Stephan Holljes
Richard Shaffer
wm4
Aman Gupta
Aman Gupta
Daniel Kucera
Clément Bœsch
Jacek Jendrzej
raymondzheng
Micah Galizia