Up until now, using NULL as key in av_dict_get() on a non-empty
AVDictionary would crash; using NULL as key in av_dict_set()
would also crash for a non-empty AVDictionary unless AV_DICT_MULTIKEY
was set; in case the dictionary was initially empty or AV_DICT_MULTIKEY
was set, it was even possible for av_dict_set() to succeed when
adding a NULL key, namely when one uses a value != NULL and
the AV_DICT_DONT_STRDUP_VAL flag. Using av_dict_get() on such
an AVDictionary will usually lead to crashes, though.
Fix this by actually checking for key in both functions; error out
if they are NULL.
While just at it, also stop relying on av_strdup(NULL) to return NULL
in av_dict_set().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The compiler cannot infer that the two float vectors do not alias,
causing unnecessary extra loads and serialisation. This patch caches
the two input values in local variables so that compiler can optimise
individual loop iterations.
While this probably never overflows, we are better safe than sorry.
The callback prototype should probably also use ptrdiff_t or size_t,
but I diggress (this would affect the DSP callback prototype).
Do this by setting AVCodecInternal.pad_samples.
This prevents reading into the frame's padding and writing
into the packet's padding.
This actually happened in our FATE tests (where the number of samples
is 2 mod 4), which therefore needed to be updated.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Some audio codecs work with atomic units that decode to a fixed
number of audio samples with this number being so small that it is
common to put multiple of these atoms into one packet. In these
cases it makes no sense to pad the last frame to the big frame_size,
so allow encoders to set the number of samples that they want
the last frame to be padded to instead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, check that there is only one small last frame
in case the encoder has the AV_CODEC_CAP_SMALL_LAST_FRAME set.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The APTX (HD) decoder decodes blocks of four (six) bytes to four
output samples. It makes no sense to handle incomplete blocks:
They would just lead to synchronization errors, in which case
the complete frame is discarded. So only handle complete blocks.
This also avoids reading from the packet's padding and writing
into the frame's padding.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Just because we try to put multiple units of block_align bytes
(the atomic units for APTX and APTX HD) into one packet
does not mean that packets with fewer units than the
one we wanted are corrupt; only those packets that are not
a multiple of block_align are.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This field was misunderstood: It gives the number of samples
in a packet, not the number of bytes. Its usage was wrong for APTX HD.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently the APTX (HD) codecs set frame_size if unset and check
whether it is divisible by block_size (corresponding to block_align
as used by other codecs). But this is based upon a misunderstanding
of the API: frame_size is not in bytes, but in samples.
Said value is also not intended to be set by the user at all,
but set by encoders and (possibly) decoders if the number of channels
in a frame is constant. The latter condition is not fulfilled here,
so only set it for encoders. Given that the encoder can handle any
number of samples as long as it is divisible by four and given that
it worked to set a custom frame size before, the encoders accept
any multiple of four; otherwise the value is set to the value
that it already had for APTX: 1024 samples (per channel).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
APTX decodes four bytes of input to four stereo samples; APTX HD
does the same with six bytes of input. So it can be easily supported
in av_get_audio_frame_duration().
This fixes invalid durations and (derived) timestamps of demuxed
APTX HD packets and therefore fixed the timestamp in the aptx-hd
FATE test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We have de- and encoders for APTX and APTX HD, yet not FATE tests.
This commit therefore adds a transcoding test to utilize them.
Furthermore, during creating these tests it turned out that
the duration is set incorrectly for APTX HD. This will be fixed
in a future commit.
(Thanks to Andriy Gelman for finding an issue in an earlier version
that used a 192kHz input sample which does not work reliably accross
platforms.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This block was scheduled for removal, which means that no validation would have
taken place after the old API was removed.
It was algo going to mistakenly remove an unrelated bits_per_coded_sample
check.
Signed-off-by: James Almer <jamrial@gmail.com>
The opaque parameter for the callback is set in videotoolbox_start(),
called when the hwaccel is initialized. When frame threading is used,
avctx will be the context corresponding to the frame thread currently
doing the decoding. Using this same codec context in all subsequent
invocations of the decoder callback (even those triggered by a different
frame thread) is unsafe, and broken after
cc867f2c09, since each frame thread now
cleans up its hwaccel state after decoding each frame.
Fix this by passing hwaccel_priv_data as the opaque parameter, which
exists in a single instance forwarded between all frame threads.
The only other use of AVCodecContext in the decoder output callback is
as a logging context. For this purpose, store a logging context in
hwaccel_priv_data.
This is no longer used since 4608996772.
It also has no implementations other than the plain C one.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Since introducing the various packed formats used by VAAPI (and p012),
we've noticed that there's actually a gap in how
av_find_best_pix_fmt_of_2 works. It doesn't actually assign any value
to having the same bit depth as the source format, when comparing
against formats with a higher bit depth. This usually doesn't matter,
because av_get_padded_bits_per_pixel() will account for it.
However, as many of these formats use padding internally, we find that
av_get_padded_bits_per_pixel() actually returns the same value for the
10 bit, 12 bit, 16 bit flavours, etc. In these tied situations, we end
up just picking the first of the two provided formats, even if the
second one should be preferred because it matches the actual bit depth.
This bug already existed if you tried to compare yuv420p10 against p016
and p010, for example, but it simply hadn't come up before so we never
noticed.
But now, we actually got a situation in the VAAPI VP9 decoder where it
offers both p010 and p012 because Profile 3 could be either depth and
ends up picking p012 for 10 bit content due to the ordering of the
testing.
In addition, in the process of testing the fix, I realised we have the
same gap when it comes to chroma subsampling - we do not favour a
format that has exactly the same subsampling vs one with less
subsampling when all else is equal.
To fix this, I'm introducing a small score penalty if the bit depth or
subsampling doesn't exactly match the source format. This will break
the tie in favour of the format with the exact match, but not offset
any of the other scoring penalties we already have.
I have added a set of tests around these formats which will fail
without this fix.
Update description for ssim and ms_ssim libvmaf options to specify
feature=float_ssim and feature=float_ms_ssim which are used to request
ssim and ms_ssim values in the latest versions of libvmaf.
Signed-off-by: Yondon Fu <yondon.fu@gmail.com>
Fixes: signed integer overflow: -2147448926 + -198321 cannot be represented in type 'int'
Fixes: 48798/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APE_fuzzer-5739619273015296
Fixes: 48798/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APE_fuzzer-6744428485672960
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 50936/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HDR_fuzzer-5423041009549312
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -8427924 * 256 cannot be represented in type 'int'
Fixes: 48798/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TTA_fuzzer-5409428670644224
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 127 + 2147483536 cannot be represented in type 'int'
Fixes: 48798/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MOBICLIP_fuzzer-6014034970804224
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 17121181824 * 538976288 cannot be represented in type 'long long'
Fixes: 48798/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_EXR_fuzzer-5915330316206080
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes regression with tickets/4364/L1004220.DNG
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The patch fixes the bugs that occurred when running
fate-checkasm-hevc_pel on MIPS paltform.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch fixes a bug where the fate-checkasm-motion fails when
h is not a multiple of 8.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The code to initialize it takes more space (in .text) than
the table to be initialized (namely 86B vs 64B for GCC 11.2
with -O3 in an av_cold function), so hardcode the table.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
