Extend the decklink output to include support for compressed AC-3,
encapsulated using the SMPTE ST 377:2015 standard.
This functionality can be exercised by using the "copy" codec when
the input audio stream is AC-3. For example:
./ffmpeg -i ~/foo.ts -codec:a copy -f decklink 'UltraStudio Mini Monitor'
Note that the default behavior continues to be to do PCM output,
which means without specifying the copy codec a stream containing
AC-3 will be decoded and downmixed to stereo audio before output.
Thanks to Marton Balint for providing feedback.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Implement support for including AFD in decklink output when putting
out 10-bit VANC data.
Updated to reflect feedback in 2018 from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com> and Aaron Levinson
<alevinsn_dev@levland.net>. Also includes fixes to set the AR field
based on the SAR, as well as now sending the AFD info in both fields
for interlaced formats.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
These fields are supposed to store information about the packet the
frame was decoded from, specifically the byte offset it was stored at
and its size.
However,
- the fields are highly ad-hoc - there is no strong reason why
specifically those (and not any other) packet properties should have a
dedicated field in AVFrame; unlike e.g. the timestamps, there is no
fundamental link between coded packet offset/size and decoded frames
- they only make sense for frames produced by decoding demuxed packets,
and even then it is not always the case that the encoded data was
stored in the file as a contiguous sequence of bytes (in order for pos
to be well-defined)
- pkt_pos was added without much explanation, apparently to allow
passthrough of this information through lavfi in order to handle byte
seeking in ffplay. That is now implemented using arbitrary user data
passthrough in AVFrame.opaque_ref.
- several filters use pkt_pos as a variable available to user-supplied
expressions, but there seems to be no established motivation for using them.
- pkt_size was added for use in ffprobe, but that too is now handled
without using this field. Additonally, the values of this field
produced by libavcodec are flawed, as described in the previous
ffprobe conversion commit.
In summary - these fields are ill-defined and insufficiently motivated,
so deprecate them.
Due to refactoring, the ctx/cctx variables are never actually used
in ff_decklink_write_packet(), so just remove them.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The ff_decklink_write_packet() was always caching the last pts
received, to be used when calling StopScheduledPlayback(). However
because audio and video are on different timebases and the call to
StopScheduledPlayback() expects the video timebase, we'll end up
sending a weird value to the stop routine if the last packet
received contained audio.
Move the setting of last_pts to just be for the video stream.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The existing code assumed that the first frame received by the decklink
output would always be PTS zero. However if running in other timing
modes than the default of CBR, items such as frame dropping at the
beginning may result in starting at a non-zero PTS.
For example, in our setup because we discard probing data and run
with "-vsync 2" the first video frame scheduled to the decklink
output will have a PTS around 170. Scheduling frames too far into
the future will either fail or cause a backlog of frames scheduled
far enough into the future that the entire pipeline will stall.
Issue can be reproduced with the following command-line:
./ffmpeg -copyts -i foo.ts -f decklink -vcodec v210 -ac 2 'DeckLink Duo (4)'
Keep track of the PTS of the first frame received, so that when
we enable start playback we can provide that value to the decklink
driver.
Thanks to Marton Balint for review and suggestion to use
AV_NOPTS_VALUE rather than zero for the initial value.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This commit does for AVOutputFormat what commit
20f9727018 did for AVCodec:
It adds a new type FFOutputFormat, moves all the internals
of AVOutputFormat to it and adds a now reduced AVOutputFormat
as first member.
This does not affect/improve extensibility of both public
or private fields for muxers (it is still a mess due to lavd).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The general demuxing API uses parsers and decoders. Therefore
FFStream contains pointers to AVCodecContexts and
AVCodecParserContext and lavf/internal.h includes lavc/avcodec.h.
Yet actually only a few files files really use these; and it is best
when this number stays small. Therefore this commit uses opaque
structs in lavf/internal.h for these contexts and stops including
avcodec.h.
This also avoids including lavc/codec_desc.h implicitly. All other
headers are implicitly included as now (mostly through codec.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids an extra copy of potentially quite big video frames.
Instead of copying the entire frames data into a rawvideo packet it
packs the frame into a wrapped avframe packet and passes it through
as-is.
Unfortunately, wrapped avframes are set up to be video frames, so the
audio frames continue to be copied.
Additionally, this enabled passing through video frames that previously
were impossible to process, like hardware frames or other special
formats that couldn't be packed into a rawvideo packet.
According to API docs avdevice_list_devices(), avdevice_list_input_sources()
and avdevice_list_input_sinks() should return the number of autodetected
devices on success. This is redundant with AVDeviceInfoList->nb_devices so it
was not noticed earlier that none of the underlying device list functions work
like that.
Let's fix it in generic code to make it in line with the API docs.
Fixes ticket #9820.
Signed-off-by: Marton Balint <cus@passwd.hu>
The packets given to muxers need not be writable,
so it is best to access them via const uint8_t*.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Don't assume each sample is one byte in size. Doing so results in wrong and
occasionally non-monotonically-increasing timestamps.
Fix nearby cosmetic typo.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reduces default fragment size from the pulse audio default of 2 sec to 50 ms.
This also has an effect on the size of the returned frames, which will be
around 50 ms as well, making timestamps more accurate.
This should fix the regression in ticket #9776.
Pulseaudio timestamps for monitor sources are still pretty inaccurate for me,
but I don't see how else should we query latencies from the library.
Signed-off-by: Marton Balint <cus@passwd.hu>
This reverts commit 7f059a250b.
Apparently adjusting latency makes a difference even if fragment size is specifed.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fix for f125c504d8, requested_sample_rate
and such should be used.
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This file is both for the various public APIs that are demuxer-only
as well as for the demuxer-only internal functions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids having to rebuild big files every time FFMPEG_VERSION
changes (which it does with every commit).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
a1c4929f accidentally undid part of d9a9b4c8, so the bug in ticket #9420
resurfaced. Fixing again.
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids unnecessary churn and build breakage for users, by
making sure the whole version.h is included like it has been so far,
while keeping the benefit of not needing to rebuild most files in
the ffmpeg tree on minor/micro bumps.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also bump the minor versions of all libraries, to signify the
API change of splitting the version.h headers and adding the
new version_major.h header.
Signed-off-by: Martin Storsjö <martin@martin.st>
Devin Heitmueller
Anton Khirnov
Michael Niedermayer
James Almer
Andreas Rheinhardt
Marvin Scholz
Timo Rothenpieler
Zhao Zhili
Marton Balint
Matt Jacobson
Diederick Niehorster
Romain Beauxis
Martin Storsjö