osd/PGLog: set acceptable rollback_info_trimmed_to for pg of replicated pool
Reviewed-by: Samuel Just <sjust@redhat.com>
Reviewed-by: Kefu Chai <kchai@redhat.com>
legacy-option-headers provides global_legacy_options.h, which is in turn
required for building crimson-admin.
Signed-off-by: Kefu Chai <kchai@redhat.com>
set(dpdk_LIBRARIES) does not reset this variable, it leaves it
unchanged.
if pkg-config manages to find DPDK libraries, dpdk_LIBRARIES would be
set with a string like "rte_node;rte_graph;..." by
pkg_check_modules(dpdk QUIET libdpdk).
but we would want to set this variable to the import paths of the
required libraries. so reset it before appending them to this variable.
this change helps to address the build failure when building Ceph with
DPDK installed into system along with its .pc file.
Signed-off-by: Kefu Chai <kchai@redhat.com>
<experimental/iterator> was included for std::experimental::make_ostream_joiner
in a968f65d78. but the code using
std::experimental::make_ostream_joiner was later rewritten in
ab0d8f2ae9, in which
std::experimental::make_ostream_joiner is not used anymore.
so let's drop it.
Signed-off-by: Kefu Chai <kchai@redhat.com>
This diff makes the following changes:
- FSMap::compat is now just a "default compat" of currently unknown
utility. It is used when constructing a new file system but does
not really have any effect or current use.
- The `mds compat *` CLI commands are deprecated. They manipulate
the default compat which has no useful effect.
- Each MDS sends its compat to the mons in its beacon. This is from
MDSMap::get_compat_set_all() at MDS boot. This CompatSet does not
change for the duration of the MDS lifetime.
- Mons record each MDS compat in the FSMap to inform standby failover.
An MDS is only promoted if it is compatible with the file system
compat.
- Mons upgrade (merge) the file system compat when (a) the number of
*in* MDS is 1 (effected by max_mds=1) and (b) the mons are promoting a
standby with a new compat. A file system is never upgraded when there
is more than 1 rank to prevent two MDS with incompatible compat.
- A suite of `fs compat` commands exist to manipulate the file system
compat. These exist mostly for testing.
The consequence of these changes is that the upgrade procedure for MDS
can be updated to no longer require turning off all MDS but rank 0
before performing any upgrades. A CompatSet change would cause all MDS
receiving the new MDSMap to suicide due to incompatibility (if so).
Instead, the monitors will no longer assign an incompatible MDS to a
file system and enforce an upgrade procedure if incompatibilities exist.
Fixes: https://tracker.ceph.com/issues/49720
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
The MDS_FEATURE_INCOMPAT_INLINE feature indicates that an MDS knows how
to read/write inline data and that the file system may have it. The
separate setting for inline_data protects this file system feature.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
It's not necessary to distribute a CompatSet with the null mdsmap. We
only need to communicate that the MDS is not part of any map.
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
With the implementation of DBStore, it was determined that the API used
for writing in Zipper was too tied to RADOS. Implement a clean writing
API named Writer.
Signed-off-by: Daniel Gryniewicz <dang@redhat.com>
Modified test cases:
1. ver-health.sh:
a. TEST_check_version_health_1():
To avoid intermittent timeouts observed in wait_for_health_string(),
increase the wait time to 20 secs.
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
The following tests in the test files mentioned below use the
"osd_scrub_sleep" option to introduce delays during scrubbing to help
determine scrubbing states, validate reservations during scrubbing etc..
This works when using the "wpq" scheduler.
But when the "mclock_scheduler" is enabled, the "osd_scrub_sleep" is
disabled and overridden to 0. This is done to delegate the scheduling of
the background scrubs to the "mclock_scheduler" based on the set QoS
parameters. Due to this, the checks to verify the scrub states,
reservations etc. fail since the window to check them is very short
due to scrubs completing very quickly. This affects a small subset of
scrub tests mentioned below,
1. osd-scrub-dump.sh -> TEST_recover_unexpected()
2. osd-scrub-repair.sh -> TEST_auto_repair_bluestore_tag()
3. osd-scrub-test.sh -> TEST_scrub_abort(), TEST_deep_scrub_abort()
Only for the above tests, until there's a reliable way to query scrub
states with "--osd-scrub-sleep" set to 0, the "osd_op_queue" config
option is set to "wpq".
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
Modified test cases:
1. test-erasure-eio.sh:
a. Test_ec_backfill_unfound():
- Set osd_mclock_profile to high_recovery_ops profile.
- Increase the wait for backfill_unfound timeout to 240 secs.
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
Modified test cases:
1. osd-backfill-prio.sh:
Set osd_op_queue = wpq for all tests since the mclock doesn't
consider recovery priority as part of its scheduling algorithm.
2. osd-backfill-space.sh:
Set osd_mclock_profile to high_recovery_ops and increase the wait
for backfills timeout to 1200 secs for the following tests:
- TEST_backfill_test_simple()
- TEST_backfill_test_multi()
- TEST_backfill_test_sametarget()
- TEST_backfill_multi_partial()
- TEST_ec_backfill_simple()
- TEST_ec_backfill_multi()
- SKIP_TEST_ec_backfill_multi_partial()
- SKIP_TEST_ec_backfill_multi_partial()
3. osd-backfill-stats:
- TEST_backfill_ec_down_all_out():
Set osd_mclock_profile to high_recovery_ops and increase the wait
for recovery timeout to 240 secs.
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
Modified test cases:
1. osd-recovery-prio.sh:
Set osd_op_queue = wpq for all tests since mclock
doesn't consider recovery priority as part of its
scheduling algorithm.
2. osd-recovery-stats.sh:
a. TEST_recovery_undersized():
- Set osd_mclock_profile to high_recovery_ops profile.
- Increase wait for recovery timeout to 300 secs.
3. osd-rep-recov-eio.sh:
a. TEST_rep_backfill_unfound():
- Set osd_mclock_profile to high_recovery_ops profile.
- Increase wait for backfill_unfound to 360 secs.
4. repeer-on-acting-back.sh:
a. TEST_repeer_on_down_act():
- Set osd_mclock_profile to high_recovery_ops profile.
(To improve the test duration)
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
List of changes:
1. Remove the enforcement to use osd_op_queue=wpq when an osd is brought
up in the following functions:
- run_osd()
- run_osd_filestore() and
- activate_osd()
2. New functions:
- get_op_scheduler() - Get the current osd_op_queue for an osd.
3. Modified test cases:
- test_run_osd() - Add check for osd_max_backfill count.
The mclock scheduler overrides the count to 1000.
4. New test cases:
- test_activate_osd_after_mark_down()
- test_get_op_scheduler()
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
The new config option "osd_mclock_force_run_benchmark_on_init" is
introduced to allow a user to force run the OSD benchmark test on every
OSD boot-up even if the historical data about the OSD's iops capacity is
available on the MON config store. The 'force_run_benchmark' flag is set
to the value indicated by the new config option.
By default this new config option is set to false.
The utility of this option is to help refresh the OSD iops capacity
when the underlying device's performance characteristics have changed
significantly. In such cases, the OSD can be restarted with this option
enabled temporarily. Once the new iops capacity is updated to the MON
store, this option can be removed from the OSD's start-up config.
Fixes: https://tracker.ceph.com/issues/51464
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
Use "mon_cmd_set_config()" to store the OSD's max iops capacity to
the MON store during the first bring-up. Don't run the OSD benchmark
test on subsequent boot-ups if a previously persisted iops capacity is
available on the MON store and is different from the default iops
capacity.
Add the 'force_run_benchmark' flag to force a run of the benchmark
in case the default iops capacity cannot be determined.
Fixes: https://tracker.ceph.com/issues/51464
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
Add wrapper method "get_val_default()" to the ConfigProxy class that takes
the config option key to search. This method in-turn calls another method
with the same name added to md_config_t class that does the actual work of
searching for the config option. If the option is valid, _get_val_default()
is used to get the default value. Otherwise, the wrapper method returns
std::nullopt.
Fixes: https://tracker.ceph.com/issues/51464
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
Add method mon_cmd_set_config() to save config option key and
value to the MON store. The ConfigMonitor command, 'config set' is
used to achieve this.
A corresponding get method is unnecessary since any config option
found on the MON store is loaded during OSD boot-up and set using
the md_config_t::set_mon_vals() method. Therefore, the existing
versions of ConfigProxy::get_val() method are sufficient to get
the latest value for the config option.
Fixes: https://tracker.ceph.com/issues/51464
Signed-off-by: Sridhar Seshasayee <sseshasa@redhat.com>
