struct btrfs_super is about 3.5k but a few writing paths were writing it
out as the full 4k BTRFS_SUPER_INFO_SIZE, leaking a few hundred bytes
after the super_block onto disk. In practice this meant the memory
after super_copy in struct btrfs_fs_info and whatever came after it in
the heap.
Signed-off-by: Zach Brown <zab@redhat.com>
old_left_nritems is unsigned so BUG_ON(old_left_nritems < 0) is
impossible. Presumably the BUG_ON() meant to test that it wasn't 0 so
that btrfs_item_offset_nr() doesn't get a nr of -1.
Signed-off-by: Zach Brown <zab@redhat.com>
Check for failure by testing for a negative file descriptor, not a
descriptor of 0. And if it failed we have nothing to close().
Signed-off-by: Zach Brown <zab@redhat.com>
btrfs_free_path() derefs the path before freeing it. It can't be passed
a null pointer when allocation fails.
Signed-off-by: Zach Brown <zab@redhat.com>
'next' can never be non-null in the body of these loops. It's
initialized to NULL and the loop is terminated the moment it is set.
Signed-off-by: Zach Brown <zab@redhat.com>
copy_one_inline() meant to test the return of pwrite() with ram_size.
Presumably the comparison with len was copied from the test earlier in
the function.
Signed-off-by: Zach Brown <zab@redhat.com>
size_sourcedir() uses shockingly bad code to try and estimate the size
of the files and directories in a subtree.
- Its use of snprintf(), strcat(), and sscanf() with arbitrarily small
on-stack buffers manages to overflow the stack a few times when given
long file names.
$ BIG=$(perl -e 'print "a" x 200')
$ mkdir -p /tmp/$BIG/$BIG/$BIG/$BIG/$BIG
$ mkfs.btrfs /tmp/img -r /tmp/$BIG/$BIG/$BIG/$BIG/$BIG
*** stack smashing detected ***: mkfs.btrfs terminated
- It passes raw paths to system() allowing interpreting file names as
shell control characters.
$ mkfs.btrfs /tmp/img -r /tmp/spacey\ dir/
du: cannot access `/tmp/spacey': No such file or directory
du: cannot access `dir/': No such file or directory
- It redirects du output to "temp_file" in the current directory,
allowing overwriting of files through symlinks.
$ echo hi > target
$ ln -s target temp_file
$ mkfs.btrfs /tmp/img -r /tmp/somedir/
$ cat target
3 /tmp/somedir/
This fixes the worst problems while maintaining -r functionality by
tearing out the system() code and using ftw() to walk the source tree
and sum up st.st_size.
Signed-off-by: Zach Brown <zab@redhat.com>
check_owner_ref() could deref a null path node if btrfs_search_slot()
fails or simply doesn't find a tree tall enough to get to the parent of
the desired block.
This was flagged by static analysis warning that btrfs_search_slot()'s
return value wasn't being checked.
Signed-off-by: Zach Brown <zab@redhat.com>
Again: caught by static analysis.
Errors cow-ing the root block are silently being dropped. This is
just a step towards error handling because both the caller and calee
assert on errors.
Signed-off-by: Zach Brown <zab@redhat.com>
The super block magic is a le64 whose value looks like an unterminated
string in memory. The lack of null termination leads to clumsy use of
string functions and causes static analysis tools to warn that the
string will be unterminated.
So let's just treat it as the le64 that it is. Endian wrappers are used
on the constant so that they're compiled into run-time constants.
Signed-off-by: Zach Brown <zab@redhat.com>
This was a bug from long time ago that never actually got fixed. We start
with bytenr 0 when looping through all of the block groups, but
btrfs_lookup_block_group will bail out since it couldn't find a block group
with 0 as the bytenr. Btrfs_lookup_first_block_group will be nice and
adjust the start up to the right value, so this way we reset all the block
groups properly and not screw up the users block group accounting. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
unless it was intentional to include uuid when -s
option is (show snapshot only) given, we would need
this break statement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
This patch makes btrfsck print the filesystem, which is to be checked,
to stdout, as well as the UUID of the corresponding partition.
This should be helpful when analyzing (copied and pasted) output of
btrfsck.
Signed-off-by: Dieter Ries <mail@dieterries.net>
- rename to match code where applicable
- add missing options
- unify the help strings in short and detailed sections
- fix a few typos
Signed-off-by: David Sterba <dsterba@suse.cz>
Rename filter options in 'subvol list' subcommand, that way we can
distinguish them from the options that just show some option in the
output and can have a matching uppercase filter.
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs snapshot list command will stop by the deleted subvolumes.
The problem may happen by two ways:
1. a subvolume deletion is not commited, that is ROOT_BACKREF has been deleted,
but ROOT_ITEM still exists. The command will fail to fill the path of
the deleted subvolumes because we can not get the parent fs/file tree.
2. a subvolume is possibly deleted when we fill the path, For example,
Fs tree
|->subv0
|->subv1
We may fill the path of subv1 firstly, after that, some user deletes subv1
and subv0, and then we fill the path of subv0. The command will fail to
fill the path of subv0 because we can not get path of subv0. And the command
also will fail to make the full path of subv1 because we don't have the path
of subv0.
Since these subvolumes have been deleted, we should filter them. This patch
fixed the above problem by this way.
For the 1st case, ->ref_tree of the deleted subvolumes are 0.
For the 2nd case, if we found the error number that ioctl() returns is ENOENT,
we will set ->ref_tree to 0.
And when we make the full path of the subvolumes, we will check ->ref_tree of
them and their parent. If someone's ->ref_tree or its parent's ->ref_tree is 0,
we will filter it.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
This adds show sub-command to the btrfs subvol cli
to display detailed inforamtion of the given subvol
or snapshot.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
get_subvol_name can be used other than the just with in cmds-send.c
so this patch will make it possible with out changing the original
intentions.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Currently you can print subvol in a list or table format.
This patch will provide a way to extend this to other formats
like the upcoming raw format.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
We need a function which can get the root_info of a given
subvol. This is in preparation to add support for the show
sub-cli.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
As we would add more ways to list and manage the subvols
and snapshots, its better if we have struct root_info
defined in the header file.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
To improve the code reuse its better to have btrfs_list_subvols
just return list of subvols witout printing
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Commit a1e89891eb changed subvolume list
command so that we list only subvolumes under the specified directory.
However this is confusing and unnecessary obstacle, because one usually
want to see all subvolumes in the file system. It was introduced with
the notion the full_path may be invalid which is not exactly true as the
full_path is always relative to the root subvolume which makes perfect
sense.
Simply making option '-a' default is not enough since it introduces the
relative/absolute path distinction effectively obfuscating the subvolume
nesting.
This commit returns the subvolume list command behaviour before commit
a1e89891eb where we list all subvolumes in
the filesystem with path naming from root subovolume. IMO this is the
best default as it is well understood and gives all the important
information about file system subvolumes including subvolume nesting
without the need to parse additional information.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
This commit introduces new option '-o' to list only subvolumes under the
specified path. This does not change subvolume list behaviour. It has
been default in the past and it is even with this commit.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Commit 8e8e019e91 introduces -a option
which will list all subvolumes with distinguishing between relative and
absolute by prepending absolute patch with "<FS_TREE>".
This commit moves the path modification to a filter code rather than
doing so in path construction in resolve_root(). This gives us more
flexibility in formatting path output.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
When typing command "btrfs send --help" or "btrfs receive --help",
the help information of the commands is incomplete, which only
shows a short usage.
This patch helps to display the complete infomation of the commands.
Signed-off-by: Cheng Yang <chenyang.fnst@cn.fujitsu.com>
This patch turns on the BTRFS_FEATURE_INCOMPAT_EXTENDED_IREF superblock flag
when creating a new file system in mkfs, enabling extended inode refs.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Add a function, process_inode_extref() to be called from process_one_leaf()
when an item type of BTRFS_INODE_EXTREF_KEY is encountered.
Similarly to process_inode_ref(), process_inode_extref() walks an extref and
adds an inode_backref structure for each reference found within.
I modified fsck's inode_backref to get a type field (ref_type) which helps
us internally track the exact type of backrefs found. Of course this field
could be overwritten in case of disk corruption (duplicate refs) but
duplicate refs themselves are tracked by btrfsck so that should not be an
issue as btrfsck is written today.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
This patch syncs the extended inode ref definitions from kernels ctree.h and
adds support in btrfs-debug-tree for visualizing the state of extended refs
on disk.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
In cmd_send_start(), there is a check to make sure dump_fd is not a tty
before parsing command options. So if we use the option "-f file",
it doesn't work for the dump_fd has not been created. So fix it.
Signed-off-by: Cheng Yang <chenyang.fnst@cn.fujitsu.com>
Parallel build may fail due to late creation of version.h, fix the rule name
that does not match the filename.
Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Eri Sandeen <sandeen@redhat.com>
Commit 605e806166 broke the
mkfs.btrfs -r option, because it calls make_btrfs
without ever setting dev_block_count, in the -r case,
so we tell it to make a filesystem of size 0.
Then we wander into ENOSPC land and segfault.
As a quick one-line-fix, just set the dev_block_count
to the size of the destination image file.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
This is the user mode part of the device replace patch series.
The command group "btrfs replace" is added with three commands:
- btrfs replace start srcdev|srcdevid targetdev [-Bfr] mount_point
- btrfs replace status mount_point [-1]
- btrfs replace cancel mount_point
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
"btrfs device stats" is used to retrieve and print the device stats.
"btrfs device stats -z" is used to atomically retrieve, reset and
print the stats.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Two convenient utility functions that have so far been local to scrub are
moved to utils.c.
They will be used in the device stats code in a following commit.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>