This patch adds an option to btrfstune, '-r' which will enable the extended
inode refs flag on the provided btrfs superblock. We don't have a disable
option at the moment as that would require far more work.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Due to some historical reasons, we remove 'printing leaf' part, which'd
lead to 'Segmentation fault' of btrfs-debug-tree -e, this patch adds it
back.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
The core of this is shamelessly stolen from xfsprogs.
Use blkid to detect an existing filesystem or partition
table on any of the target devices. If something is found,
require the '-f' option to overwrite it, hopefully avoiding
disaster due to mistyped devicenames, etc.
# mkfs.btrfs /dev/sda1
WARNING! - Btrfs v0.20-rc1-59-gd00279c-dirty IS EXPERIMENTAL
WARNING! - see http://btrfs.wiki.kernel.org before using
/dev/sda1 appears to contain an existing filesystem (xfs).
Use the -f option to force overwrite.
#
This does introduce a requirement on libblkid.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
We are casting an array of u64 values into a char ** array so
when we dereference this array (as a char **) on a 32 bit system
we're then re-casting that back to a 32 bit value. This causes
problems when we try to print those strings.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Currently, the following commands succeed.
# cat /proc/swaps
Filename Type Size Used Priority
/dev/sda3 partition 8388604 0 -1
/dev/sdc8 partition 9765884 0 -2
# mkfs.btrfs /dev/sdc8
WARNING! - Btrfs v0.20-rc1-165-g82ac345 IS EXPERIMENTAL
WARNING! - see http://btrfs.wiki.kernel.org before using
fs created label (null) on /dev/sdc8
nodesize 4096 leafsize 4096 sectorsize 4096 size 9.31GB
Btrfs v0.20-rc1-165-g82ac345
# btrfs fi sh /dev/sdc8
Label: none uuid: fc0bdbd0-7eed-460f-b4e9-131273b66df2
Total devices 1 FS bytes used 28.00KB
devid 1 size 9.31GB used 989.62MB path /dev/sdc8
Btrfs v0.20-rc1-165-g82ac345
#
But we should check out the swap device. Fixed it.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
Please find attached a patch to make the new libbtrfs usable from
C++ (at least for the parts snapper will likely need).
Signed-off-by: Arvin Schnell <aschnell@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
This is a progs counterpart to a "Btrfs: allow for selecting only
completely empty chunks". usage=0 now means "select only only
completely empty chunks and nothing else".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
send-test.c links against libbtrfs and uses the send functionality provided
to decode and print a send stream to the console.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.cz>
The flag and command are synced from kernel to user. Also, this patch adds a
callback for the BTRFS_SEND_C_UPDATE_EXTENT in struct btrfs_send_ops.
read_and_process_cmd() is updated to decode BTRFS_SEND_C_UPDATE_EXTENT and
send the values through the right callback. I did not add a callback
definition to cmds-receive.c as that code never uses
BTRFS_SEND_FLAG_NO_FILE_DATA.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Add 'btrfs restore' command which previously existed as a separate
utility btrfs-restore.
Signed-off-by: Ian Kumlien <pomac@demius.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch adds a busybox-style name detection for the name "btrfsck" to
btrfs utility. The idea is to maintain backwards compatibility by
linking btrfsck to btrfs and have btrfs invoke the check sub-command
when called through the btrfsck link. This has been suggested on the
mailing list and approved by Dave and Chris.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch includes the functionality of btrfs, it's
found as "btrfs check".
Signed-off-by: Ian Kumlien <pomac@demius.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
My builds are cluttered with:
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined [enabled by
default]
Which makes it hard to tell if something breaks or not.
Signed-off-by: Ian Kumlien <pomac@demius.net>
Sometimes, when you least expect it, a static binary is what you need to
rescue your data... Or just get a good enough handle on things to make
it work again ;)
"make static" is a gift to you, dear user with filesystem problems!
Anyway, on a more serious note, changed the cflags and ldflags so that
we create a smaller binary, 1.1MB stripped on my 64 bit system
(2.7MB with debug data)
Signed-off-by: Ian Kumlien <pomac@demius.net>
Instead of doing a BUG_ON() if we fail to find the last fs root just return
an error so the callers can deal with it how they like. Also we need to
actually return an error if we can't find the latest root so that the error
handling works. With this btrfsck was able to deal with a file system that
was missing a root item but still had extents that referred back to the
root. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Noticed this while looking for an segfault related to our eb cache in
btrfsck. We free the eb in out: so we don't need this extra free. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
A user had a problem where btrfsck would bail out because it was finding
extents for a snapshot that had been deleted but not entirely cleaned up.
We can handle this case fine, we just need to report an error properly.
This patch allowed btrfsck to continue and eventually fix his file system.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
print more informative error when we fail to open a device
If open() fails, we should let the user know why it failed.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Several goto out; paths will end up doing i.e.
if (pipefd[0])
close(pipefd[0]);
but we get there with uninitialized values in many cases.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
3 places where we copy pathnames into ioctl arguments
were not limited to the destination name size, and
could overflow. Use the new strncpy_null() macro
to make this safe.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
In the places where we copy a string into the name
member of btrfs_ioctl_vol_args or btrfs_ioctl_vol_args_v2,
we use strncopy (to not overflow the name array) and then
set the last position to the null character.
Howver, in both cases the arrays are defined with:
char name[MAX+1];
hence the last array position is name[MAX].
In most cases, we now insert the null at name[MAX-1]
which deprives us of one useful character.
Even the above isn't consistent through the code, so
make some helper code to make it simple, i.e.
strncpy_null(dest, src) which automatically does the
right thing based on the size of dest.
Thanks to Zach Brown for the macro suggestion.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
cmd_subvol_create() calls either BTRFS_IOC_SUBVOL_CREATE
or BTRFS_IOC_SUBVOL_CREATE_V2 depending on whether or
not inherit is set. However, these 2 ioctls have different
args structures with different length name[] members.
In the BTRFS_IOC_SUBVOL_CREATE case, the arg is
btrfs_ioctl_vol_args, with a BTRFS_PATH_NAME_MAX length
name, not a BTRFS_SUBVOL_NAME_MAX length name.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
__setup_root() was present in find-root.c as well
as disk-io.c. No need for the cut and paste, just
use the one in disk-io.c
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Zach Brown <zab@redhat.com>
"mdresotre" sounds like it might be French, but most
likely it's a misspelling of mdrestore. Fix it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Zach Brown <zab@redhat.com>
Mostly just to keep things like coverity happy about potentially
uninitialized structure members, since it doesn't grok the ioctl.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Zach Brown <zab@redhat.com>
In the case that btrfs scrub cancel is given a device name,
we close the file handle, and then pass it to check_mounted_where()
which eventually preads from that (now closed) fd. Fix the logic
so that we close & re-open the discovered mountpoint properly.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Zach Brown <zab@redhat.com>
If scrub start discovers that scrub is already running,
we need to set prg_fd to -1 before goto out, or we'll
try to close it again in the error path.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Zach Brown <zab@redhat.com>
If connection fails the socket is leaked when the status file is used
instead. Close it to trivially cut down on fd use and to bring down the
noise in static code analysis.
Signed-off-by: Zach Brown <zab@redhat.com>
It looks possible to hit the search_again label without using the
prealloc. A new prealloc is allocated, leaking the current one.
Every use of prealloc sets it to null so let's just allocate a new
prealloc when we don't already have one.
Signed-off-by: Zach Brown <zab@redhat.com>
btrfs_scan_one_dir() can overflow an arbitrarily small 256 byte buffer
with an arbitrarily slightly larger 1024 byte buffer as it remembers the
path of a dir to later descend.
Make these buffers the same size to stop the overflow and chose PATH_MAX
for that size so that it won't fail on legitimately bonkers paths.
Signed-off-by: Zach Brown <zab@redhat.com>
Path allocation failure already has its own return, remember to free the
path when the error label is taken.
Signed-off-by: Zach Brown <zab@redhat.com>
