The error string buffer passed as an argument is of a fixed size, though
we could print up to PATH_MAX + something bytes. Print the error message
directly.
Signed-off-by: David Sterba <dsterba@suse.cz>
The error string buffer passed as an argument is of a fixed size, though
we could print up to PATH_MAX + something bytes. Print the error message
directly.
Signed-off-by: David Sterba <dsterba@suse.cz>
We should zero the dirstream in case we close it ourselves, so the
caller does not do it again. Most current callers do not do that and
exit immediatelly.
Signed-off-by: David Sterba <dsterba@suse.cz>
The variable argv0_buf was duplicated and the changes done in utils.c
were not propagated to help.c. So if an unknown commandline token was
found, the error message did not contain the known part:
$ btrfs scrub test
: unknown token 'test'
instead of
$ btrfs scrub test
btrfs scrub: uknown token 'test'
Signed-off-by: David Sterba <dsterba@suse.cz>
The function make_btrfs() has as argument the fsid of the filesystem.
If this fsid is empty or null make_btrfs() generates a new fsid. However
If the buffer is valid (but the string is empty) the generated fsid is
copied back to the caller.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When creating a new btrfs_device, copy the path to track it. This path
is then used by mkfs.btrfs to list all devices.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Currently BTRFS allows you to make bad choices of data and
metadata levels. For example -d raid1 -m raid0 means you can
only use half your total disk space, but will lose everything
if 1 disk fails. It should give a warning in these cases.
When making a filesystem, check that metadata mode is at least
as redundant as the data mode. For example give warning when:
-d raid1 -m raid0
Signed-off-by: Sam Tygier <samtygier@yahoo.co.uk>
[make the check more visible in mkfs output]
Signed-off-by: David Sterba <dsterba@suse.cz>
After Patch:
remove BTRFS_SCAN_PROC scan method
There isn't any consumer for btrfs_scan_block_devices() so delete it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
mkfs and convert will not support the same features, -O will print only
the list according to the given mask.
Signed-off-by: David Sterba <dsterba@suse.cz>
Now parse_qgroupid() can resolve subvolume path into qgroupid.
This is quite handy for handling level 0 qgroupid, and user don't need
to resolve rootid by hand now.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[constify string in __is_subvol]
Signed-off-by: David Sterba <dsterba@suse.cz>
check_node_or_leaf_size in utils.c now prints 'nodesize (or leafsize)'
instead of 'leafsize (or nodesize)' in the error messages, in order to
be less confusing for the user, as leafsize in mkfs is deprecated.
'ERROR: ' is also prepended to be consistent with other error messages.
Signed-off-by: Sebastian Thorarensen <sebth@naju.se>
Signed-off-by: David Sterba <dsterba@suse.cz>
Move the constant DEFAULT_MKFS_LEAF_SIZE to utils.h and rename it to
BTRFS_MKFS_DEFAULT_NODE_SIZE for consistency. Move the function
check_leaf_or_node_size to utils.c and rename it to
btrfs_check_node_or_leaf_size.
Signed-off-by: Sebastian Thorarensen <sebth@naju.se>
[added btrfs_ prefix]
Signed-off-by: David Sterba <dsterba@suse.cz>
glibc 2.10+ (5+ years old) enables all the desired features:
_XOPEN_SOURCE 700, __XOPEN2K8, POSIX_C_SOURCE, DEFAULT_SOURCE; with a
single _GNU_SOURCE define in the makefile alone. For portability to
other libc implementations (e.g. dietlibc) _XOPEN_SOURCE=700 is also
defined.
This also resolves Debian bug report filed by Michael Tautschnig -
"Inconsistent use of _XOPEN_SOURCE results in conflicting
declarations". Whilst I was not able to reproduce the results, the
reported fact is that _XOPEN_SOURCE set to 500 in one set of files
(e.g. cmds-filesystem.c) generates/defines different struct stat from
other files (cmds-replace.c).
This patch thus cleans up all feature defines, and sets them at a
consistent level.
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747969
Signed-off-by: Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The newly introduced search_chunk_tree_for_fs_info() won't count devid 0
in fi_arg->num_devices, which will cause buffer overflow since later
get_device_info() will fill di_args with devid.
This can be trigger by fstests/btrfs/069 and any operations needs to
iterate over all the devices like 'fi show' or 'dev stat' while
replacing.
The fix is do an extra probe specifically for devid 0 after
search_chunk_tree_for_fs_info() and change num_devices if needed.
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The commit 1bad43fbe0 ("btrfs-progs: refine btrfs-debug-tree error
prompt when a mount point given")
add judgement on btrfs-debug-tree to restrict only block device to be
executed on, but the command can also be used on regular file, so add
regular file support for the judgement.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The check_arg_type() function does quite generic thing, move it to
utils.c.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The @fi_args->num_devices in @get_fs_info() does not include seed devices.
We could just correct it by searching the chunk tree and count how
many dev_items there are in total which includes seed devices.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The following BUG_ON:
BUG_ON(ndevs >= fi_args->num_devices)
is not needed, because it always fails with seed devices present.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Current error messages are like following:
Error: unable to create FS with metadata profile 32 (have 2 devices)
Error: unable to create FS with metadata profile 256 (have 2 devices)
Obviously it is hard for users to interpret "profile XX" to proper
meaning, such as "raidN". So use recongizable string instead of
internal numerical value. In case of "DUP", use an explicit message.
Plus this patch fix a bug that message mistake metadata profile
for data profile.
After applying this patch, messages will be like:
Error: DUP is not allowed when FS have multiple devices
Error: unable to create FS with metadata profile RAID6 (have 2
devices but 3 devices are required)
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Enhance the command "btrfs filesystem df" to show space usage information
for a mount point(s). It shows also an estimation of the space available,
on the basis of the current one used.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
[code moved under #if 0 instead of deletion]
Signed-off-by: David Sterba <dsterba@suse.cz>
Make run from a long base path will overflow the argv0 buffer during
tests. Otherwise, this would happen for all the standalone binaries that
use set_argv0.
Original report:
https://bbs.archlinux.org/viewtopic.php?id=189861
Reported-by: WorMzy Tykashi <wormzy.tykashi@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_scan_lblikd() is called by most the device related command functions.
And btrfs_scan_lblkid() is most expensive function and it becomes more expensive
as number of devices in the system increase. Further some threads call this
function more than once for absolutely no extra benefit and the real waste of
resources. Below list of threads and number of times btrfs_scan_lblkid()
is called in that thread.
btrfs-find-root 1
btrfs rescue super-recover 2
btrfs-debug-tree 1
btrfs-image -r 2
btrfs check 2
btrfs restore 2
calc-size NC
btrfs-corrupt-block NC
btrfs-image NC
btrfs-map-logical 1
btrfs-select-super NC
btrfstune 2
btrfs-zero-log NC
tester NC
quick-test.c NC
btrfs-convert 0
mkfs #number of devices to be mkfs
btrfs label set unmounted 2
btrfs get label unmounted 2
This patch will:
move out calling register_one_device with in btrfs_scan_lblkid()
and so function setting the BTRFS_UPDATE_KERNEL to yes will
call btrfs_register_all_devices() separately.
introduce a global variable scan_done, which is set when scan is
done succssfully per thread. So that following calls to this function
will just return success.
Further if any function needs to force scan after scan_done is set,
then it can be done when there is such a requirement, but as of now there
isn't any such requirement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This function is to register all devices found after scanning
the system. Before we had this functionality with in the
btrfs_scan_lblkid(), however scanning and registering are two
different distinct operation its better keep them separate.
Also we want to optimize btrfs_scan_lblkid and avoid multiple
system scans unless needed. As of now device scan uses this function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
There is a compatibility issue with older kernel with the progs commit id as below.
d0588bfa47
btrfs-progs: do a separate probe for _transient_ replacing device
So as of now writing to revert the above commit id.
The brewing sysfs interface would help to fix the impending issue, which is
seed device would fail show in 'btrfs fi show' output of a sprout device.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
cmd_scan_dev() has it own code to register device (calling ioctl
BTRFS_IOC_SCAN_DEV), apparently it could use btrfs_register_one_device().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This change adds code to detect and fix the issue introduced in the kernel
release 3.17, where creation of read-only snapshots lead to a corrupted
filesystem if they were created at a moment when the source subvolume/snapshot
had orphan items. The issue was that the on-disk root items became incorrect,
referring to the pre orphan cleanup root node instead of the post orphan
cleanup root node.
A test filesystem can be generated with the test case recently submitted for
xfstests/fstests, which is essencially the following (bash script):
workout()
{
ops=$1
procs=$2
num_snapshots=$3
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
snapshot_cmd="$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT"
snapshot_cmd="$snapshot_cmd $SCRATCH_MNT/snap_\`date +'%H_%M_%S_%N'\`"
run_check $FSSTRESS_PROG -p $procs \
-x "$snapshot_cmd" -X $num_snapshots -d $SCRATCH_MNT -n $ops
}
ops=10000
procs=4
snapshots=500
workout $ops $procs $snapshots
Example of btrfsck's (btrfs check) behaviour against such filesystem:
$ btrfsck /dev/loop0
root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Found 7 roots with an outdated root item.
Please run a filesystem check with the option --repair to fix them.
$ echo $?
1
$ btrfsck --repair /dev/loop0
enabling repair mode
fixing root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
fixing root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
fixing root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
fixing root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
fixing root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
fixing root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
fixing root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Fixed 7 roots.
Checking filesystem on /dev/loop0
UUID: 2186e9b9-c977-4a35-9c7b-69c6609d4620
checking extents
checking free space cache
cache and super generation don't match, space cache will be invalidated
checking fs roots
checking csums
checking root refs
found 618537000 bytes used err is 0
total csum bytes: 130824
total tree bytes: 601620480
total fs tree bytes: 580288512
total extent tree bytes: 18464768
btree space waste bytes: 136939144
file data blocks allocated: 34150318080
referenced 27815415808
Btrfs v3.17-rc3-2-gbbe1dd8
$ echo $?
0
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
coverity warned that the return code from sscanf() assigned to 'i'
wasn't checked before being assigned again. Check it.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
We are passing device path to be registered with in kernel,
so we need to open with RW
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The size unit format is a longstanding annoyance. This patch is based on
the work of Nils and Alexandre and enhances the options. It's possible
to select raw bytes, SI-based or IEC-based compact units (human
frientdly) or a fixed base from kilobytes to terabytes. The default is
compact human readable IEC-based, no change to current version.
CC: Nils Steinger <nst@voidptr.de>
CC: Alexandre Oliva <oliva@gnu.org>
Reviewed-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: David Sterba <dsterba@suse.cz>
'const int const *x' means the same thing as 'const int *x' or
'int const *x'; the intent was probably 'const int * const x'.
However, this won't work for the 'suffix' variable, as it has
to be assigned, and making the static tables into const pointers
to const chars leads to a mismatch there.
This was found with clang's duplicate-decl-specifier warning.
Signed-off-by: Adam Buchbinder <abuchbinder@google.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The functionality of pretty unit printing was duplicated by
df_pretty_sizes, merge it with pretty_size and enhance the interface
with more suffix mode. Raw, binary or decimal.
Signed-off-by: David Sterba <dsterba@suse.cz>
As mentioned in the kernel patch
btrfs: ioctl BTRFS_IOC_FS_INFO and
BTRFS_IOC_DEV_INFO miss-matched with slots
The count as returned by BTRFS_IOC_FS_INFO is the number of slots that
btrfs-progs would allocate for the BTRFS_IOC_DEV_INFO ioctl. Since
BTRFS_IOC_DEV_INFO would loop across the seed devices, So its better
ioctl BTRFS_IOC_FS_INFO returns the total_devices instead of num_devices.
The above mentioned patch just does that. That is, it returns
total_devices instead of num_devices.
Which means we need to probe for the replacing device separately.
This patch will probe for the replacing device separately.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
With the changes as in the previous patch, now scan_for_btrfs()
is an unused function. So delete it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The libblkid scan method which was introduced later, will also
scan devices under /proc/partitions. So we don't have to do
the explicit scan of the same.
Remove the scan method BTRFS_SCAN_PROC.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
(I am unable to reproduce the issue, tried to go back with progs versions
but still the same. So as of now this code remains untested, suggest to
wait till we have a reproducible test case).
Here is a test case which says it all..
mkfs.xfs -f $DEV
mkfs.btrfs -f $DEV
mount $DEV $MNT
mount: /dev/vdiskc: more filesystems detected. This should not happen,
use -t <type> to explicitly specify the filesystem type or
use wipefs(8) to clean up the device.
mount: you must specify the filesystem type
with this patch btrfs_prepare_device() also wipes old FS if any,
btrfs_prepare_device() is called after we have verified that
user has provided -f option.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
After the previous 2 patches, nothing uses
whole-dev-tree scanning, so remove the code which
implemented that functionality.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
