Bit shifts should be done on unsigned type as a matter of good practice
to avoid any problems with bit overflowing to the sign bit.
Signed-off-by: David Sterba <dsterba@suse.com>
Bit shifts should be done on unsigned type as a matter of good practice
to avoid any problems with bit overflowing to the sign bit.
Signed-off-by: David Sterba <dsterba@suse.com>
Bit shifts should be done on unsigned type as a matter of good practice
to avoid any problems with bit overflowing to the sign bit.
Signed-off-by: David Sterba <dsterba@suse.com>
Sync a few more file on the source level with kernel 6.8.
- type cleanups
- defines and enums
- comments
- parameter updates
- error handling
Signed-off-by: David Sterba <dsterba@suse.com>
The initial version of libbtrfsutil did not follow a unified naming
scheme that's usually used for libraries like those provide by
util-linux. Add aliases that are "btrfs_util_" + object + action +
suffix.
The library version changes to 1.3 but there's no new functionality,
only the aliases added. New functions can be added in the future without
possible confusion when the same action could apply to different
objects.
Issue: #574
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With the latest kernel patch to reject invalid qgroupids in
btrfs_qgroup_inherit structure, "btrfs subvolume create" or "btrfs
subvolume snapshot" can lead to the following output:
# mkfs.btrfs -O quota -f $dev
# mount $dev $mnt
# btrfs subvolume create -i 2/0 $mnt/subv1
Create subvolume '/mnt/btrfs/subv1'
ERROR: cannot create subvolume: No such file or directory
The "btrfs subvolume" command output the first line, seemingly to
indicate a successful subvolume creation, then followed by an error
message.
This can be a little confusing on whether if the subvolume is created or
not.
[FIX]
Fix the output by only outputting the regular line if the ioctl
succeeded.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove btrfs_qgroup_inherit_add_copy() and the command line interface.
This was designed to add a pair of source/destination qgroups into
btrfs_qgroup_inherit structure, so that rfer/excl numbers would be
copied from the source qgroup into the destination one.
This behavior has been intentionally hidden since 2016, as such copy will
cause qgroup inconsistent immediately and a rescan would reset whatever
numbers copied anyway.
Now we're going to reject the copy behavior from kernel, there is no
need to keep those hidden (and already disabled for "subvolume create")
case.
Remove btrfs_qgroup_inherit_add_copy() call, and cleanup the
undocumented options.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Feature from https://github.com/sphinx-doc/sphinx/pull/2064 enable
navigation to be able to navigate documentation using the arrow keys.
Pull-request: #754
Author: Martin <spleefer90@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use a more descriptive name, the interface is generic so it should use
the generic term for file/directory.
Signed-off-by: David Sterba <dsterba@suse.com>
There are some cases that disable verbosity (of errors) and then print
own message. Enable the verbose error messages printed by
btrfs_open_fd2() as they are specific.
Signed-off-by: David Sterba <dsterba@suse.com>
The code in scrub predates the global verbosity options and sets its own
quiet status. This is still used only for error messages that should be
printed even with -q. Drop that or replace with bconf.verbose status
check.
Signed-off-by: David Sterba <dsterba@suse.com>
There are many places that pass false as verbosity argument and then
print an error message, or don't print any message in error cases.
Use btrfs_open_file_or_dir_fd() that will be verbose in case of an error
with the same semantics.
Signed-off-by: David Sterba <dsterba@suse.com>
It's commonly used elsewhere in the code to return the -errno values if
possible, do that for the open helpers too.
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
However this is never used. So avoid calling diropen() and return
only the fd.
Replace the last reference to btrfs_open_file_or_dir3() with
btrfs_open_fd2().
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
However this is never used. So avoid calling diropen() and return
only the fd.
Replace open_file_or_dir() with btrfs_open_fd2() removing any reference
to the unused/useless dirstream variables. btrfs_open_fd2() is required
to avoid spurious error messages.
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
However this is never used. So avoid calling diropen() and return
only the fd.
Replace btrfs_open_file_or_dir() with btrfs_open_file_or_dir_fd()
removing any references to the unused/useless dirstream variables.
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
However this is never used. So avoid calling diropen() and return
only the fd.
Replace open_file_or_dir3() with btrfs_open_fd2() removing any reference
to the unused/useless dirstream variables. btrfs_open_fd2() is needed
because sometime the callers need to set the RDONLY/RDWRITE mode, and to
avoid spurious messages.
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
However this is never used. So avoid calling diropen() and return
only the fd.
Replace open_path_or_dev_mnt() with btrfs_open_mnt_fd() removing
any reference to the unused/useless dirstream variables.
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
However this is never used. So avoid calling diropen() and return
only the fd.
Replace the last btrfs_open_dir() call with btrfs_open_dir_fd()
removing any reference to the unused/useless dirstream variables.
Also update the add_seen_fsid() function removing any reference to dir
stream (again this is never used).
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
Replace btrfs_open_dir() with btrfs_open_dir_fd() removing
any reference to the unused/useless dirstream variables.
Calling btrfs_open_dir_fd() with only the path is equivalent to
btrfs_open_dir(_, _, 1).
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
For historical reasons the helpers [btrfs_]open_dir... return also
the 'DIR *dirstream' value when a directory is opened.
However this is never used. So avoid calling diropen() and return only
the fd. This is a preparatory patch.
Signed-off-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a report that 'btrfs balance start --enqueue' does not properly
wait when there are multiple instances started. The command does a busy
wait instead of timeouts.
Strace output:
0.000006 pselect6(5, NULL, NULL, [4], {tv_sec=60, tv_nsec=0}, NULL) = 1 (except [4], left {tv_sec=59, tv_nsec=999999716})
0.000008 pselect6(5, NULL, NULL, [4], {tv_sec=29, tv_nsec=999999000}, NULL) = 1 (except [4], left {tv_sec=29, tv_nsec=999998786})
After the first select there's almost the entire time left, the second
one starts right after it.
Polling/selecting sysfs files is possible under some conditions:
- the file descriptor must be reopened before each poll/select
- the whole buffer must be read too
With that in place it now works as expected. The remaining timeout logic
is slightly adjusted to wait at most 10 seconds so the pending jobs do
not wait too long if there's still a lot of time left from the first
select.
Issue: #746
Signed-off-by: David Sterba <dsterba@suse.com>
Use the new docref and duplabel syntax to fix build warnings and fix the
link targets in the pages.
[ci skip]
Signed-off-by: David Sterba <dsterba@suse.com>
Sphinx/RST does not(?) have native support for cross references to
labels in specific documents (doc, ref but not both at the same time),
also allowing duplicate labels. We have web and manual pages and to
share the same text there are common files included from each, defining
labels. This leads to warnings and clicking the links ends up in the
included document (like ch-volume-management-intro.rst) instead of the
parent.
As a last resort, implement own role that does the doc and ref in one
go. A special directive is used to define a label that is expected
to be duplicate (but otherwise it's an ordinary label) and this gets rid
of the warning too.
Signed-off-by: David Sterba <dsterba@suse.com>
Subpage promoted to 'OK', no serious problems since 6.0. Otherwise
references, adjustments, wording updates.
[ci skip]
Signed-off-by: David Sterba <dsterba@suse.com>
We've deprecated the -R option and runtime feature distinction, there's
only one option -O recommended so let it also print on the same line.
Incompat/compat/runtime status of a feature shall be consulted with the
documentation.
Signed-off-by: David Sterba <dsterba@suse.com>
Be verbose about the potential compatibility problems with the
sectorsize and page size. Also print the page size on the overview.
Signed-off-by: David Sterba <dsterba@suse.com>
There are new backends and builtin accelerated implementations.
Recalculate the table results, a different host than before, with SHANI
extension.
[ci skip]
Signed-off-by: David Sterba <dsterba@suse.com>
