If we have everything except the dir item and dir index we can easily replace
them, so add this ability to btrfsck. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If there are errors when opening the fs because of PARTIAL we could think that
the zero-log didn't actually work. Add a printf so we know that it was
successfull. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
It's nice to ignore errors on restore, but spit out the filename so the user
knows which files of his aren't going to look right. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We were failing to fsck a volume because we couldn't open the log tree, which is
not helpful. Make us skip erroring out if we are using OPEN_CTREE_PARTIAL since
it isn't a mandatory tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Somtetimes you just need to delete an item, add that functionality to
btrfs-corrupt-block. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
gcc 4.9.0 gives warnings about possibly uninitialized values when
compiling with function inlining and optimization level two enabled
(CFLAGS="-finline-functions -O2").
Initializing the values fixes the warning. Hope this is correct.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_scan_lblikd() is called by most the device related command functions.
And btrfs_scan_lblkid() is most expensive function and it becomes more expensive
as number of devices in the system increase. Further some threads call this
function more than once for absolutely no extra benefit and the real waste of
resources. Below list of threads and number of times btrfs_scan_lblkid()
is called in that thread.
btrfs-find-root 1
btrfs rescue super-recover 2
btrfs-debug-tree 1
btrfs-image -r 2
btrfs check 2
btrfs restore 2
calc-size NC
btrfs-corrupt-block NC
btrfs-image NC
btrfs-map-logical 1
btrfs-select-super NC
btrfstune 2
btrfs-zero-log NC
tester NC
quick-test.c NC
btrfs-convert 0
mkfs #number of devices to be mkfs
btrfs label set unmounted 2
btrfs get label unmounted 2
This patch will:
move out calling register_one_device with in btrfs_scan_lblkid()
and so function setting the BTRFS_UPDATE_KERNEL to yes will
call btrfs_register_all_devices() separately.
introduce a global variable scan_done, which is set when scan is
done succssfully per thread. So that following calls to this function
will just return success.
Further if any function needs to force scan after scan_done is set,
then it can be done when there is such a requirement, but as of now there
isn't any such requirement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This function is to register all devices found after scanning
the system. Before we had this functionality with in the
btrfs_scan_lblkid(), however scanning and registering are two
different distinct operation its better keep them separate.
Also we want to optimize btrfs_scan_lblkid and avoid multiple
system scans unless needed. As of now device scan uses this function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The following commit changed the argument requirement for
'--subvol-extents', which causes it to call arg_strtou64() on NULL,
resulting a segfault.
d34cbe76 btrfs-progs: check: do not require argument for --subvol-extents
This patch revert the patch and change the help string and man page to
make it no longer confusing.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Stalling problems may happen when exec balance & fi show cmds concurrently.
With the following commit:
commit 915902c500
btrfs-progs: fix device missing of btrfs fi show with seed devices
The fi show cmd will bother the mounted fs when only umounted fs should
be handled after @btrfs_can_kernel() has finished showing all mounted ones.
We could skip the mounted fs after @btrfs_can_kernel() is done, then tasks
keeps going on mounted fs while fi show continues on umounted ones separately.
Reported-by: Petr Janecek <janecek@ucw.cz>
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
There is a compatibility issue with older kernel with the progs commit id as below.
d0588bfa47
btrfs-progs: do a separate probe for _transient_ replacing device
So as of now writing to revert the above commit id.
The brewing sysfs interface would help to fix the impending issue, which is
seed device would fail show in 'btrfs fi show' output of a sprout device.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
'btrfs fi df' needs exactly one arguments as mount option,
but as 3.17 we can run 'btrfs fi df' without any argument,
and it will error as "ERROR: can't access '%s'" which means
the argument number does not do what it should.
The bug is caused by manually modify the optind and use check_argc_max()
instead of the original check_argc_exact().
This patch fixes it by not modifying the optind and use check_argc_exact()
again.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_setup_all_roots() had some copy and pasted code for trying to
setup a root and then creating a blank node if that failed. The copy
for the csum_root created the blank node in the extent_root.
So we create a function to use a consistent root.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
coverity barked out a warning that btrfs-map-logical was storing but
ignoring errors from read_extent_from_disk(). So don't ignore 'em. I
made extent reading errors fatal to match the fatal errors from mapping
mirrors above.
And while we're at it have read_extent_from_disk() return -errno pread
errors instead of -EIO or -1 (-EPERM). The only other caller who tests
errors clobbers them with -EIO.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
cmd_scan_dev() has it own code to register device (calling ioctl
BTRFS_IOC_SCAN_DEV), apparently it could use btrfs_register_one_device().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If BTRFS_IOC_DEV_REPLACE ioctl failed, args.result usually won't be
updated by the ioctl.
And the arg has been initialized with 0, the result is always 0, which
is BTRFS_IOCTL_DEV_REPLACE_RESULT_NO_ERROR, and the resulting error
message looks confusing:
ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs": No such file or directory, no error
But in case there's an internal result returned in future, don't drop
the result completely, instead print dev replace result message only
if the result is updated by a failed ioctl call.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This change adds code to detect and fix the issue introduced in the kernel
release 3.17, where creation of read-only snapshots lead to a corrupted
filesystem if they were created at a moment when the source subvolume/snapshot
had orphan items. The issue was that the on-disk root items became incorrect,
referring to the pre orphan cleanup root node instead of the post orphan
cleanup root node.
A test filesystem can be generated with the test case recently submitted for
xfstests/fstests, which is essencially the following (bash script):
workout()
{
ops=$1
procs=$2
num_snapshots=$3
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
snapshot_cmd="$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT"
snapshot_cmd="$snapshot_cmd $SCRATCH_MNT/snap_\`date +'%H_%M_%S_%N'\`"
run_check $FSSTRESS_PROG -p $procs \
-x "$snapshot_cmd" -X $num_snapshots -d $SCRATCH_MNT -n $ops
}
ops=10000
procs=4
snapshots=500
workout $ops $procs $snapshots
Example of btrfsck's (btrfs check) behaviour against such filesystem:
$ btrfsck /dev/loop0
root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Found 7 roots with an outdated root item.
Please run a filesystem check with the option --repair to fix them.
$ echo $?
1
$ btrfsck --repair /dev/loop0
enabling repair mode
fixing root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
fixing root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
fixing root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
fixing root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
fixing root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
fixing root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
fixing root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Fixed 7 roots.
Checking filesystem on /dev/loop0
UUID: 2186e9b9-c977-4a35-9c7b-69c6609d4620
checking extents
checking free space cache
cache and super generation don't match, space cache will be invalidated
checking fs roots
checking csums
checking root refs
found 618537000 bytes used err is 0
total csum bytes: 130824
total tree bytes: 601620480
total fs tree bytes: 580288512
total extent tree bytes: 18464768
btree space waste bytes: 136939144
file data blocks allocated: 34150318080
referenced 27815415808
Btrfs v3.17-rc3-2-gbbe1dd8
$ echo $?
0
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
coverity pointed out that unknown flag printing in show super had some
dead code. It turns out that first was reset when the first flag was
tested, not when it was output. We only want to clear it if the first
matching bit is output. If there are no matching bits then we'll want
to output the unknown flag first.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
coverity warned that the return code from sscanf() assigned to 'i'
wasn't checked before being assigned again. Check it.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
We are passing device path to be registered with in kernel,
so we need to open with RW
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now commands mentioned below (with in [..]) are calling call register-device
ioctl BTRFS_IOC_SCAN_DEV for all the devices in the system.
Some issues with it:
BTRFS_IOC_SCAN_DEV: ioctl is a write operation, we don't want command like
btrfs-debug-tree threads to do that..
eg:
----
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
0
$ btrfs-debug-tree /dev/sde (num_device > 1)
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
5
----
btrfs_scan_fs_devices() ends up calling this ioctl only when num_device > 1.
That's inconsistency with in feature/bug.
We don't have to register _all_ the btrfs devices (again) in the system
without user consent.
Why its inconsistent:
function btrfs_scan_fs_devices() calls btrfs_scan_lblkid only when
num_devices is > 1, which in turn calls BTRFS_IOC_SCAN_DEV ioctl, if
conditions are met.
But main issue is we have too many consumers of btrfs_scan_fs_devices()
the names below with in [] is the cli leading to this function.
open_ctree_broken() [btrfs-find-root]
recover_prepare() [btrfs rescue super-recover]
__open_ctree_fd
(updates always except when flag OPEN_CTREE_RECOVER_SUPER is set and
flag OPEN_CTREE_RECOVER_SUPER is set only by 'btrfs rescue super-
recover' but still this thread sneaks through the open_ctree function
to call register-device-ioctl as show below).
open_ctree_fs_info
[btrfs-debug-tree]
[btrfs-image -r]
[btrfs check]
open_fs
[btrfs restore]
open_ctree
[calc-size]
[btrfs-corrupt-block]
[btrfs-image] (create)
[btrfs-map-logical]
[btrfs-select-super]
[btrfstune]
[btrfs-zero-log]
[tester]
[mkfs]
[quick-test.c]
[btrfs label set unmounted]
[btrfs get label unmounted]
[btrfs rescue super-recover]
open_ctree_fd
[btrfs-convert]
Fix:
In an effort to make register-device consistent, all calls to
btrfs_scan_fs_devices() will have 5th parameter set to 0. that means
we don't need 5th parameter at all. And with this function not calling
the register ioctl at all, finally we will have following two cli to call
the ioctl BTRFS_IOC_SCAN_DEV.
btrfs dev scan and
mkfs.btrfs
Threads needing to update kernel about a device would have to use
btrfs_register_one_device() separately.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When we have one device we don't call register device.
(in fact not mandatory, but to make it consistent)
And when we have more than one we call register device.
reproducer:
Nothing in the kernel device list
cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
0
mkfs.btrfs will automatically call register device when devices
is more than 1.
mkfs.btrfs -f /dev/sdb /dev/sdc
cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
1
But it does not when there is only one device
mkfs.btrfs -f /dev/sdb
cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
0
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The following commit:
"btrfs-progs: fsck: remove unfriendly BUG_ON() for searching tree failure"
f495a2ac66
introduced a regression, detected through xfstests/btrfs/054, where
previously a negative return value (-1) was used to mean a particular
root didn't had any parent root, and now, after that change, a negative
value is also used to mean that an error happened. That change also made
the only caller of is_child_root() interpret any negative return value
as an error and therefore incorrectly made the caller leave with an
error, instead of continuing.
This affects only the 3.17 release candidates (3.16 and older releases
don't have this issue).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
chunk-recover.c: In function btrfs_calc_stripe_index
chunk-recover.c:1481: warning: index may be used uninitialized in this function
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If we have a corrupt block that multiple snapshots point to we will only fix the
guy who originally pointed to the block, and then simply loop forever because we
keep finding the same bad block. So instead lookup all roots that point to this
block, and then search down to the block for each root and fix the block in all
snapshots. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We can deal with corrupt items by deleting them in a few cases. Fsck can easily
recover from a missing extent item or a dir index item. So if we notice a item
is completely bogus and it is of a key that we know we can repair then just
delete it and carry on. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Usually if we find a bad block during the extent tree stuff we will error out,
but if the bad block is in an fs tree and doens't have extents in it then fsck
may still pass even though the block was complete garbage. So add the check
block logic to the fs root checking so we actually error out of fsck if there is
a bad block. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
A user had a corrupted fs where the items had been shifted improperly. This
patch adds the ability to fix this sort of problem within fsck. We will simply
shift the item over to the proper offset and update the offsets to make sure
they are correct. I tested this with a hand crafted fs that was broken in the
same way as the user, and I've included the file as a new test. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
A user had a corrupted fs where his items where shifted oddly. This adds the
functionality I needed to btrfs-corrupt-block in order to reproduce this
corruption in order to make fsck fix this sort of problem. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
In order to test the dir index corruption fixing patches in fsck we need to add
functionality to btrfs-corrupt-block to corrupt dir item fields. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Sometimes we have a dir index and an inode ref that don't agree on the index.
In this case just assume that the inode ref is the ultimate authority on the
subject and delete the dir index. This means we have to not reset index if we
find a mismatched inode ref to make sure we delete the right dir index. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If our location is bogus in our dir item we were just skipping the thing.
However in this case we want to just delete the dir index, so create a dummy
inode rec using BTRFS_MULTIPLE_OBJECTIDS and just add every backref we find to
the list so we know to straight up delete all of these items. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We may run across dir indexes that are corrupt in such a way that it makes them
useless, such as having a bad location key or a bad name. In this case we can
just delete dir indexes that don't show up properly and then re-create what we
need. When we delete dir indexes however we need to restart scanning the fs
tree as we could have greated bogus inode recs if the location key was bad, so
set it up so that if we had to delete an dir index we go ahead and free up our
inode recs and return -EAGAIN to check_fs_roots so it knows to restart the loop.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If we change something while scanning fs-roots we need to redo our search so
that we get valid root items and have valid root cache. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If we hid a corrupt block that we fix and we restart the fsck loop you will get
lots of noise about duplicate block groups and such. This is because we don't
clear the block group and chunk cache when we do this restart. This patch fixes
that, which is a little tricky since the structs are linked together with
various linked lists, but this passed with a user who was hitting this problem.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
While debugging a broken fs we were seeing hangs in the rb_erase loops. The
rbtree was simple and wasn't corrupted so it appeared to be a bug in our rbtree
library. Updating to the kernels latest rbtree code made the infinite loop go
away, so pull it back. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
These were added to deal with duplicated functionality within btrfs-progs, but
we specifically copied rbtree.c from the kernel, so move these functions out
into their own file. This will make it easier to keep rbtree.c in sync. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>