Now, if exec:
# btrfs-debug-tree <mount_point>
it echos:
: Superblock bytenr is larger than device size
But it is quite misleading, because it is a valid btrfs.
In this case, we should tell the developer to provide a block device.
After apply:
: '<mount_point>' is not a block device
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The check_arg_type() function does quite generic thing, move it to
utils.c.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Commit 8be2fff (btrfs-progs: apply realpath for btrfs fi
show when mount point is given) changed the behavior of
btrfs fi show to return an error if the call to realpath()
failed. This broke the ability to specify a filesystem by
uuid or label.
So let's not consider a failed call to realpath() as an
error. If the user really specified a bad device, just
return nothing like we did before.
Signed-off-by: Justin Maggard <jmaggard10@gmail.com>
Reviewed-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
In reset_nlink(), we believe rec->found_link as accurate number of the
valid links. However it only records the number of found DIR_ITEM, so we
can't use it as reliable value.
Before this patch, in some case, leaf corruption recovery will believe
there is a valid backref but don't add_link() since it can't find any
valid one and don't put it into the lost+found dir.
So the recovered inode will be considered as an orphan item without
orphan item and repair_inode_orphan_item() will add orphan item for it,
causing all the filename/filetype we recovered being a waste of time.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When "/" is Btrfs, "btrfs property <subcommand> /" regards it
as non-root by mistake.
check_is_root() regards @object as a file system root if
the following two conditions are satisfied.
a) Both @object and its parent directory are Btrfs object
(file system root, subvolume, inode, and device
used for Btrfs).
b) fsid of the above mentioned two objects are different.
It doesn't work if @object is "/" because, in this case,
fsid of "/" and its parent (it's also "/"), are the same.
* Test environment
Two Btrfs file system (not subvolume) "/" and "/home/sat/mnt".
* How to reproduce
Submit "btrfs prop get" against the above mentioned file systems.
* Test Result
** Actual result (without my patch)
==========================
ro=false
label= # label is displayed because it's a file system root
ro=false # label is not displayed even if it's a file system root
==========================
** Expected result (with my patch)
==========================
ro=false
label=
ro=false
label=foo # label is displayed
===========================
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reported-by: Naohiro Aota <naota@elisp.net>
Reviewed-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Same in kernel and matches semantics of free().
Resolves-Coverity-CID: 1054881
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If the tree's empty, we'll get NULL and dereference it.
Resolves-Coverity-CID: 1248828
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Enhance the document of btrfs property as follows.
- Add the description about the candidates of <name>.
- Enrich the description of <object>.
- Fix typos and some redundancy.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reported-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
Fix the following gcc(>4.9) and clang warning:
In file included from cmds-receive.c:24:
In file included from ./kerncompat.h:22:
In file included from /usr/include/stdio.h:27:
/usr/include/features.h:148:3: warning: "_BSD_SOURCE and _SVID_SOURCE
are deprecated, use _DEFAULT_SOURCE" [-W#warnings]
^
1 warning generated.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When compiled with clang, the following warning is outputted.
disk-io.c:1017:15: warning: comparison of unsigned expression < 0 is
always false [-Wtautological-compare]
if (dev_size < 0)
~~~~~~~~ ^ ~
1 warning generated.
This is because dev_size is defined as unsigned type, but lseek() will
return singed valued.
So the judgement will always to false.
Use temporary off_t return value to solve it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Move the linker only option -rdynamic to LDFLAGS.
This resolve lots of the following warning if using clang as CC:
clang: warning: argument unused during compilation: '-rdynamic'
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Disable backtrace and define __always_inline when glibc is not used as
libc. This, together with some header changes allows btrfs-progs to
compile with musl-libc.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
This fixes various compilation errors where PATH_MAX and XATTR_SIZE_MAX
were missing. To my knowledge, this should have no bad side effects.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
This adds two new test images
1) 008-bad-offset-snapshots. This has a corrupt item with multiple snapshots
pointing to it, to make sure the bad block repair stuff doesn't loop and
actually repairs stuff. It also requires the dir index repair stuff to pass our
built in tests which is why it's not tied to the same commit.
2) 009-bad-dir-index-name.img. This has a corrupt name in a dir index to make
sure our dir index repair stuff is working properly.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
As Chris reported at the following mail, although
btrfs property has its own manpage, man 8 btrfs-property,
there is no explanation about it in man 8 btrfs.
https://www.mail-archive.com/linux-btrfs@vger.kernel.org/msg40134.html
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
There are options to specify if the subvolume deletion should wait for
commit after each subvol or at the end. This is reported at the
beginning and considered as a noise. We'd like to report the mode for
each subvolume instead.
http://www.mail-archive.com/linux-btrfs%40vger.kernel.org/msg34617.html
Reported-by: Marc MERLIN <marc@merlins.org
Signed-off-by: David Sterba <dsterba@suse.cz>
If some critical roots are corrupt, reapr_root_items() will fail,
this is detected by fsck_tests.sh's extent rebuilding tests.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch makes us to rebuild a really corrupt extent tree with snapshots.
To implement this, we have to verify whether a block is FULL BACKREF.
This idea come from Josef Bacik:
1) We walk down the original tree, every eb we encounter has
btrfs_header_owner(eb) == root->objectid. We add normal references
for this root (BTRFS_TREE_BLOCK_REF_KEY) for this root. World peace
is achieved.
2) We walk down the snapshotted tree. Say we didn't change anything
at all, it was just a clean snapshot and then boom. So the
btrfs_header_owner(root->node) == root->objectid, so normal backref.
We walk down to the next level, where btrfs_header_owner(eb) !=
root->objectid, but the level above did, so we add normal refs for all
of these blocks. We go down the next level, now our
btrfs_header_owner(parent) != root->objectid and
btrfs_header_owner(eb) != root->objectid. This is where we need to
now go back and see if btrfs_header_owner(eb) currently has a ref on
eb. If it does we are done, move on to the next block in this same
level, we don't have to go further down.
3) Harder case, we snapshotted and then changed things in the original
root. Do the same thing as in step 2, but now we get down to
btrfs_header_owner(eb) != root->objectid && btrfs_header_owner(parent)
!= root->objectid. We lookup the references we have for eb and notice
that btrfs_header_owner(eb) no longer refers to eb. So now we must
set FULL_BACKREF on this extent reference and add a
SHARED_BLOCK_REF_KEY for this eb using the parent->start as the
offset. And we need to keep walking down and doing the same thing
until we either hit level 0 or btrfs_header_owner(eb) has a ref on the
block.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Previously, we deal with node block firstly and then leaf block which can
maximize readahead. However, to rebuild extent tree, we need deal with snapshot
one by one.
This patch makes us deal with snapshot one by one if we need rebuild extent
tree otherwise we drop into previous way.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
According to public poll, this is desired and deemed to be safe. Feature
introduced in kernel 3.10 (Jun 2013).
Signed-off-by: David Sterba <dsterba@suse.cz>
Add a basic inode item rebuild function for I_ERR_NO_INODE_ITEM.
The main use case is to repair btrfs which fs root has corrupted leaf,
but it is already working for case if the corrupteed fs root leaf/node
contains no inode extent_data.
The repair needs 3 elements for inode rebuild:
1. inode number
This is quite easy, existing inode_record codes will detect it quite
well.
2. inode type
This is the trick part. The only reliable method is to recovery it from
parent's dir_index/item.
The remaining method will search for regular file extent for FILE
type or child's backref for DIR(todo).
Fallback will be FILE.
Inode name(inode_ref) will be recoverd by nlink repair function.
This is just a fundamental implement, some advanced recovery can be
improved later with btrfs-progs infrastructure change.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Current btrfsck can skip corrupted leaf and even repair some corrupted
one if their bytenr or key order is wrong.
However when it comes to csum error leaf, btrfsck can only skip them,
which is OK for read-only iteration, but is bad for write.
This patch introduce the new repair_btree() function to recover the
btree, deleting all the corrupted leaf/node including corresponding
extent, allowing later write into the btree.
This patch provides the basis for later recovery with corrupted leaves.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When leaf/node is corrupted in fs/subvolume root, btrfsck can ignore it
without much pain except some stderr messages complaining about it.
But this works fine doing read-only works, if we want to do deeper
recovery like rebuild missing inodes in the b+tree, it will cause
problem.
At least, info user that there is something wrong in the btree,
and this patch provides the base for later btree repair.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
[BUG]
At least two users have already hit a bug in btrfs causing file
missing(Chromium config file).
The missing file's nlink is still 1 but its backref points to non-exist
parent inode.
This should be a kernel bug, but btrfsck fix is needed anyway.
[FIX]
For such nlink mismatch inode, we will reset all the inode_ref with its
dir_index/item (including valid one), and re-add the valids.
If there is no valid backref for it, create 'lost+found' under the root
of the subvolume and add link to the directory.
Reported-by: Mike Gavrilov <mikhail.v.gavrilov@gmail.com>
Reported-by: Ed Tomlinson <edt@aei.ca>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add find_file_name() and find_file_type() function for later nlink and
inode_item repair.
Later nlink repair will use both function and and inode_item repair will
use find_file_type().
They are done by searching the backref list, dir_item/index for type
search and dir_item/index or inode_ref for name search.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add count_digits() function in utils.h to help calculate filename with
ino suffix.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
With the previous btrfs inode operations patches, now we can use
btrfs_mkdir() to create the 'lost+found' dir to do some data salvage in
btrfsck.
This patch along with previous ones will make data salvage easier.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
