tdesktop/doc/building-xcode.md

248 lines
8.4 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

##Build instructions for Xcode 8.0
###Prepare folder
Choose a folder for the future build, for example **/Users/user/TBuild**
There you will have two folders, **Libraries** for third-party libs and **tdesktop** (or **tdesktop-master**) for the app.
**You will need this hierarchy to be able to follow this README !**
###Clone source code
By git in Terminal go to **/Users/user/TBuild** and run:
git clone https://github.com/telegramdesktop/tdesktop.git
###Prepare libraries
In your build Terminal run:
MACOSX_DEPLOYMENT_TARGET=10.8
to set minimal supported OS version to 10.8 for future console builds.
####zlib 1.2.8
http://www.zlib.net/ > Download [**zlib source code, version 1.2.8, zipfile format**](http://zlib.net/zlib128.zip)
Extract to **/Users/user/TBuild/Libraries**
#####Building library
In Terminal go to **/Users/user/TBuild/Libraries/zlib-1.2.8** and run:
CFLAGS="-mmacosx-version-min=10.8" LDFLAGS="-mmacosx-version-min=10.8" ./configure
make
sudo make install
####OpenSSL 1.0.1g
#####Get openssl-xcode project file
From https://github.com/telegramdesktop/openssl-xcode with git in Terminal:
* go to **/Users/user/TBuild/Libraries
* run:
git clone https://github.com/telegramdesktop/openssl-xcode.git
The path to openssl.xcodeproj should now be: **/Users/user/TBuild/Libraries/openssl-xcode/openssl.xcodeproj**
#####Get the source code:
Download [**openssl-1.0.1h.tar.gz**](http://www.openssl.org/source/openssl-1.0.1h.tar.gz) (4.3 Mb)
* Extract openssl-1.0.1h.tar.gz
* Copy everything from **openssl-1.0.1h** to **/Users/user/TBuild/Libraries/openssl-xcode**
The folder include of openssl should be:
**/Users/user/TBuild/Libraries/openssl-xcode/include**
#####Building library
* Open **/Users/user/TBuild/Libraries/openssl-xcode/openssl.xcodeproj** with Xcode
* Product > Build
####liblzma
#####Get the source code
Download [**xz-5.0.5.tar.gz**](http://tukaani.org/xz/xz-5.0.5.tar.gz)
Extract to **/Users/user/TBuild/Libraries**
#####Building library
In Terminal go to **/Users/user/TBuild/Libraries/xz-5.0.5** and there run:
./configure
make
sudo make install
####libexif 0.6.20
#####Get the source code
From https://github.com/telegramdesktop/libexif-0.6.20 with git in Terminal:
* go to **/Users/user/TBuild/Libraries**
* run:
git clone https://github.com/telegramdesktop/libexif-0.6.20.git
The folder configure should have this path:
**/Users/user/TBuild/Libraries/libexif-0.6.20/configure**
#####Building library
In Terminal go to **/Users/user/TBuild/Libraries/libexif-0.6.20** and there run
./configure
make
sudo make install
####OpenAL Soft
Get sources by git in Terminal go to **/Users/user/TBuild/Libraries** and run
git clone git://repo.or.cz/openal-soft.git
to have **/Users/user/TBuild/Libraries/openal-soft/CMakeLists.txt**
#####Building library
In Terminal go to **/Users/user/TBuild/Libraries/openal-soft/build** and there run
cmake -D LIBTYPE:STRING=STATIC -D CMAKE_OSX_DEPLOYMENT_TARGET:STRING=10.8 ..
make
sudo make install
####Opus codec
#####Get the source code
* Download sources [opus-1.1.tar.gz](http://downloads.xiph.org/releases/opus/opus-1.1.tar.gz) from http://www.opus-codec.org/downloads/
* Extract them to **/Users/user/TBuild/Libraries**
* Rename opus-1.1 to opus to have **/Users/user/TBuild/Libraries/opus/configure**
#####Building library
* Download [pkg-config 0.28](http://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz) from http://pkg-config.freedesktop.org
* Extract it to **/Users/user/TBuild/Libraries**
In Terminal go to **/Users/user/TBuild/Libraries/pkg-config-0.28** and run:
./configure --with-internal-glib
make
sudo make install
then go to **/Users/user/TBuild/Libraries/opus** and run:
./configure
make
sudo make install
####FFmpeg and Libiconv
#####Get the source code
In Terminal go to **/Users/user/TBuild/Libraries** and run:
git clone https://github.com/FFmpeg/FFmpeg.git ffmpeg
cd ffmpeg
git checkout release/3.1
* Download [libiconv-1.14](http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz) from http://www.gnu.org/software/libiconv/#downloading
* Extract to **/Users/user/TBuild/Libraries** to have **/Users/user/TBuild/Libraries/ibiconv-1.14**
#####Building library
In Terminal go to **/Users/user/TBuild/Libraries/libiconv-1.14** and run:
CFLAGS="-mmacosx-version-min=10.8" CPPFLAGS="-mmacosx-version-min=10.8" LDFLAGS="-mmacosx-version-min=10.8" ./configure --enable-static
make
sudo make install
Then in Terminal go to **/Users/user/TBuild/Libraries/ffmpeg** and run:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
brew install automake fdk-aac git lame libass libtool libvorbis libvpx opus sdl shtool texi2html theora wget x264 xvid yasm
CFLAGS=`freetype-config --cflags`
LDFLAGS=`freetype-config --libs`
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig:/usr/lib/pkgconfig:/usr/X11/lib/pkgconfig
./configure --prefix=/usr/local --disable-programs --disable-doc --disable-everything --enable-protocol=file --enable-libopus --enable-decoder=aac --enable-decoder=aac_latm --enable-decoder=aasc --enable-decoder=flac --enable-decoder=gif --enable-decoder=h264 --enable-decoder=h264_vda --enable-decoder=mp1 --enable-decoder=mp1float --enable-decoder=mp2 --enable-decoder=mp2float --enable-decoder=mp3 --enable-decoder=mp3adu --enable-decoder=mp3adufloat --enable-decoder=mp3float --enable-decoder=mp3on4 --enable-decoder=mp3on4float --enable-decoder=mpeg4 --enable-decoder=msmpeg4v2 --enable-decoder=msmpeg4v3 --enable-decoder=opus --enable-decoder=vorbis --enable-decoder=wavpack --enable-decoder=wmalossless --enable-decoder=wmapro --enable-decoder=wmav1 --enable-decoder=wmav2 --enable-decoder=wmavoice --enable-encoder=libopus --enable-hwaccel=mpeg4_videotoolbox --enable-hwaccel=h264_vda --enable-hwaccel=h264_videotoolbox --enable-parser=aac --enable-parser=aac_latm --enable-parser=flac --enable-parser=h264 --enable-parser=mpeg4video --enable-parser=mpegaudio --enable-parser=opus --enable-parser=vorbis --enable-demuxer=aac --enable-demuxer=flac --enable-demuxer=gif --enable-demuxer=h264 --enable-demuxer=mov --enable-demuxer=mp3 --enable-demuxer=ogg --enable-demuxer=wav --enable-muxer=ogg --enable-muxer=opus --extra-cflags="-mmacosx-version-min=10.8" --extra-cxxflags="-mmacosx-version-min=10.8" --extra-ldflags="-mmacosx-version-min=10.8"
make
sudo make install
####Qt 5.6.2, slightly patched
#####Get the source code
In Terminal go to **/Users/user/TBuild/Libraries** and run:
git clone git://code.qt.io/qt/qt5.git qt5_6_2
cd qt5_6_2
git checkout 5.6
perl init-repository --module-subset=qtbase,qtimageformats
git checkout v5.6.2
cd qtimageformats && git checkout v5.6.2 && cd ..
cd qtbase && git checkout v5.6.2 && cd ..
#####Apply the patch
From **/Users/user/TBuild/Libraries/qt5_6_2/qtbase**, run:
git apply ../../../tdesktop/Telegram/Patches/qtbase_5_6_2.diff
#####Building library
Go to **/Users/user/TBuild/Libraries/qt5_6_2** and run:
./configure -prefix "/usr/local/tdesktop/Qt-5.6.2" -debug-and-release -force-debug-info -opensource -confirm-license -static -opengl desktop -no-openssl -securetransport -nomake examples -nomake tests -platform macx-clang
make -j4
sudo make install
Building (**make** command) will take a really long time.
####Google Crashpad
#####Install gyp
In Terminal go to **/Users/user/TBuild/Libraries** and run:
git clone https://chromium.googlesource.com/external/gyp
git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git
cd gyp
./setup.py build
sudo ./setup.py install
cd ..
#####Build crashpad
In Terminal go to **/Users/user/TBuild/Libraries** and run:
export PATH=/Users/user/TBuild/Libraries/depot_tools:$PATH:/Users/user/TBuild/Libraries/gyp
mkdir crashpad
cd crashpad
fetch crashpad
cd crashpad/third_party/mini_chromium/mini_chromium
git apply ../../../../../../tdesktop/Telegram/Patches/mini_chromium.diff
cd ../../../
build/gyp_crashpad.py -Dmac_deployment_target=10.8
ninja -C out/Release
####Prepare GYP
In Terminal go to **/Users/user/TBuild/Libraries** and run
cd gyp
git apply ../../tdesktop/Telegram/Patches/gyp.diff
###Building Telegram Desktop
In Terminal go to **/home/user/TBuild/tdesktop/Telegram** and run
gyp/refresh.sh
Then launch Xcode, open **/Users/user/TBuild/tdesktop/Telegram.xcodeproj** and build for Debug / Release.